FCPX Project Viewer External Monitor

I would like to see my project to the LCD HDTV I have. Is there any way I can do it, I do have HDMI port in the HDTV but I am thinking how can I able to connect to my Intel iMac.
I appreciate some suggestions.
Thanks,
Yer

You need to post this in the FCP-X forum. It is located here:
https://discussions.apple.com/community/professional_applications/final_cut_pro_ x
MtD

Similar Messages

Trying to view playback on an external monitor

I need help understanding why I can't view my playback correctly.
I've tried what I think is all troubleshooting possibilities.
I am running FW out into an XL2 to a NTSC monitor.
View/External Monitor/All Frames is selected and I have tried an array of different preference settings.
I have tried all things in this thread:
http://discussions.apple.com/thread.jspa?messageID=1410167&#1410167
Any help would be appreciated.
Thanks
Jason
g5 Mac OS X (10.4.7) FCP 4.5

I to am having trouble viewing playback on an external monitor.
I just upgrade from FCP 4 to FCP 5. When I was using FCP 4 I had it set up that all I need was to click on the clip and it would be displayed on the external montior.
In FCP 5 the only setting I can find for external monitor all through firewire.
On my powerbook G4, I want to use the svideo out to an external monitor.
I have gone through at there setting with no luck. Is there any setting that I am missing to get a signal to my external monitor?
What do I need to do to get this fixed?
JEFF

CS5 Playback Settings grayed out and no longer can set playback on external monitor.

I like to view my projects while editing on an external monitor but the Playback Settings are grayed out. I've done all my prior projects with external monitor display enabled with no problems and can go back to a prior projects completed and view them using an external playback monitor. For some reason, the Playback Settings on my latest project are grayed out and I'm not able to set Desktop Video Display During Playback.
The last project worked on was about 3 months ago. Last week, I started working on two new projects and noticed that I wasn't able to set playback to my external monitor. All my devices are hooked up and I can review older projects on the external monitor but can't set two new projects to use display on the external monitor.
Anyone have any ideas?
Problem solved. My fault.
The Sequence Preset Settings selected must support the device the external monitor is connected to. In my case, IEEE 1394 firewire. I corrected the new project to the correct Sequence Settings and can now view playback on the external monitor.

http://www.blackmagicdesign.com/press/pressdetails?releaseID=42319
"The Desktop Video 9.7.5 software update allows users to take advantage of many new features in the Adobe Creative Cloud desktop applications such as powerful new editing timelines and shortcuts and audio mixing with Adobe Premiere Pro® CC and new creative and visual effects tools with Adobe After Effects® CC."
So everything should be covered on that front. And as I listed, I was getting playback out of AE CC, so I feel it is solely an issue in Premiere. That was worth checking out though since CC is so new. Thanks for replying.

FCP Problem with Firewire output to external monitor and speaker ???Help

i have a g5 powermac. the problem is when using Final cut pro 4hd. when i output my work through firewire to my external monitor and speaker i have a problem with the audio signal. Theres feedback/noise/hiss from the speakers. The firewire connects to DSR-11 vtr deck which feeds my monitor and speakers. it only happens when in FCP is set to A/V firewire output. does not happen if Video output is not set to firewire.
I Diagnosis is that it is not my dsr-11 deck or firewire i've ruled those out. The problem is either FCP software or Hardware problem with my G5
Does anyone have a similar problem. please respone, i will try to answer any respones,
Thanks
powermac g5 powermac

CaptM
From the firewire that feeds the dsr-11. on the output, i use s-video cable to my monitor (sony pvm-14l) and High Quality rca cables thet feed the audio to the Roland Speakers.
I've changed all wires and still have audio problem. I,ve changed my Dsr-11 deck to my camcorder and still have the problem.
If any of u guys use FCP The problem happens When I select view> external Monitor > and select firewire for Audio/ and video. I have never changed my editing habits, something just went wrong with the signal, I think its a Hardware problem with the firewire connection. I'm Going to have to bring this to a Apple Service Center In my local area one day.

Can't view from external monitor

You know when you have your DV connected to your mac, when you edit, the LCD on the DV would show you the final output of your project? I've been using that to see what my final output is but suddenly it's not working.
I mean, everything else works great, I double and triple checked my setting under the audio/video setting and the playback output is set to apple firewire pal, but I still can't get anything from my DV. What else should I check?

#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Viewing interlaced footage on external monitor (HD Prores)

Hi,
I have a project that I would like to watch on my Flatscreen LCD TV. My project is prores 422 1080i 50Hz (PAL) and so is my footage. My TV is connected to my Imac and set to 1080i 50Hz. FCP is set tot view all frames on external monitor (full screen) but the footage doesn't playback smoothly and still shows that it's interlaced (the TV doesn't process the footage as being interlaced). Is there a way to send an interlaced signal to a TV from FCP?

When in Mastering mode what the MXO driver is doing is interrupting the normal output of your Graphics card and instead sending uncompressed YUV + embedded audio from the application out via the graphics port (ie subverting the normal operation of the graphics card). The MXO then passes that output to its own video output ports for your monitoring pleasure, plus works some magic to translate the signal back as a color critical DVI reference signal for monitoring on a supported DV display.
... Or at least, thats my guess. But as you say, a rough understanding of the process does not make it any cheaper. Sorry about that.
Cheers
Andy

Possible to view quicktime in full screen on external monitor?

Hey All!
Im wondering if there is any way to view quicktime movies in full screen (or use front row for that matter) on an external desktop set up us as an extended desktop (as opposed to mirror). This seems like quite a dumb thing to not be able to do.

This is a problem for most software on the mac, especially games. My experience has been most software uses the primary - in this case the macbook lcd - as its display monitor. There are a few ways to fudge it to force it on another screen, but quite frankly I find that the only way to use a macbook pro and external monitor is with the lid closed.
This is generally the best solution as the menu bar is always stuck on the primary anyway.
To use the macbook closed simply wake the computer from sleep with an external keyboard or mouse the laptop and the primary will now be the external monitor.
The only real downside is how do I now use the isight????

Viewer and External Monitor doesn't playback at same time

When watching clips in the viewer window, they playback fine. But on my external monitor, it only shows the first frame from when it's played. when I stop playback, the external monitor then shows the last frame the Viewer window is stopped on. How can I fix it so that the viewer and external monitor playback the clip at the same time?
At the moment we're digitizing footage with the Offline RT Photo JPEG codec set to 75% quality.
A few days ago we were digitizing footage at 35% quality and that footage plays back fine. We moved to 75% quality at the editor's request. A few days ago we had created a few sample 75% quality tests for the editor to view. I loaded those clips into Final Cut right now and they playback fine as well. So it's all of a sudden just these new clips created yesterday :S.
Message was edited by: Phillip Roh

Yes.
Forgot to mention that the timeline plays all the footage back properly on both the canvas window and the external monitor. Sorry for not mentioning that sooner.
More discoveries! The playback 'freeze' only happens if I open a clip from the browser into the viewer. If I open a clip from the timeline into the viewer, it plays-back fine!
Message was edited by: Phillip Roh

How can I view my timeline on an external monitor?

I have a brand new mac pro tower hooked up via DVI to HMDI cable to my HD tv in my living room and I play quicktime movies and things all the time to that TV from my computer no problem.
Does any one know how to view your Final Cut timeline on an external monitor?
It's such a pain but what I've been doing lately is just exporting a final cut quicktime and playing it via Quicktime for clients to see but I'd rather not do that and just play off the timeline.
Any help would be appreciated.

Umm, frankly, you missed a lot in the manual then.
You are on the right track but the flaw in your thinking is using DVI from your video card to your tv. From Final Cut Pro, all you're getting is an extension of your desktop, that's it.
To do what you want, you need a dedicated video input/output card from Aja or Blackmagic Designs. You may want to look at the [Intensity Pro|http://www.blackmagic-design.com/products/intensity> for a very low cost monitoring solution if all you're looking at is monitoring through hdmi.

External monitor view looks stretched

Over the weekend, I ventured into the world of Mac ownership with a new macbook pro. At my office, I've connected it to a 23" external monitor just to make it easier on my eyes. When I first set it up last night, the view on the external monitor looked stretched or a like blown up version of what's on my computer screen. (FTR, I have mirror display turned on because I'm keeping the macbook on a shelf under my desk and just want to work from the one screen.) I messed with the resolution size of the external monitor but that didn't fix the problem.
Today, when I came in and hooked everything up, the screen looked like how I originally expected it to look - not stretched or any of that junk. Just very crisp and clean - exactly the way I wanted it. Then a bit ago, I tried to mess with clamshell mode and for some reason, that made the external monitor go back to being stretched. I've tried restarting several times and unplugging the DVI->mini display port converter but it's not fixing it.
I have no idea what I did right this morning, but can anyone help me? It's a stupid problem, for sure but it's annoying staring at this stretched screen.

Try this instead, hit CMD F1 to place the monitor in extended desktop mode, It should look good again.
Go to System Preferences > Displays > Arrangement tab > notice the grey "menubar" at the top of the left display. Move it to your other monitor display. This will control which monitor has the dock and menubar. If the external monitor is not available, it moves back to the MBpro.
Regards,
Captfred

How do i get the slideshow to display on my external monitor in extended view with powerpoint?

i have my T500 (windows 7) connected to a large external monitor with extended view. when i run powerpoint it displays the slideshow on my laptap screen instead of the external view. how can i have the presenter view show on my laptop, and the slideshow show on the external monitor/projector?
thanks!

You can do it that way, (Clone) but everything you do on your laptop will also be displayed on the monitor.
Assuming you would like the display on the external and freedom to navigate on your laptop without broadcasting, you would need to adjust your slide show settings in PowerPoint.
To use this procedure:
In PowerPoint, On the Slide Show menu, click Set Up Show.
Under Multiple monitors > Display slide show on drop down menu: select the monitor you want the slide show to appear on.

Viewing video on external monitor

Using an external monitor. I am able to view the desktop on this monitor. However, I am unable to view my video on this monitor. What "Preference" settings do I need to enable me to view my video. Using Final Cut Pro 4.5. External monitor is JVC TM1400SU.

I have the first selection as "None" followed by the others
4 -Digital Cinema Desktop Preview selections. None
is selected. (Is that the default setting?) I don't
see a selection for my external monitor.
G4 1.25 FW800 Mac OS X (10.4.3)
Wow -- slow down and read the posts.
Hook up your external monitor BEFORE starting FCP.
Start FCP
View - External Video -- ALL FRAMES
View - Video Playback -- Apple Firewire (etc.) Use one of these based on where you are from and the size of your video.
DO NOT use desktop preview!! You'll be messed up and have NO way of figuring out how to get out of it.
then...
View - Audio Playback -- Take your pick from the three... but make sure you've got all the correct buttons on your external source configured correctly.
Take your time and read the posts. You'll get it figured out.
CaptM

Viewing ipad1 on external monitor

Hi,
I realize I cannot "mirror" everything I see on my ipad1 on an external monitor. I'm able to view videos on my external monitor using my VGA adapter, but the video is not displayed on my ipad at the same time. Is this possible for videos?
Thanks!
~Frank

Different devices you're using. The VGA is for the basic normal projector, while the HDMI is primarily on HD TV sets. I'm sure there are some HDMI projectors out there, but the vast majority are VGA. (One of the funnier moments of the iPad2 keynote was Jobs describing all the teachers mirroring on the flat screen TV's in their classrooms - since then I've gone to a number of educational technology conferences and meetings, and have yet to find a teacher with a flatscreen instead of a VGA projector ).
I believe the VGA can't output the full HD image, while of course the HDMI can.

Viewing HDV on external monitor

Hello, is there anyway to view HDV footage on an external monitor? Aside from creating a DV sequence from the HDV footage? If not please tell me why. I am using a Sony HDV deck. Any help would be appreciate. Thanks!

http://discussions.apple.com/thread.jspa?messageID=8466428&#8466428
You'll need a card.
Best regards, WA

Seeing jagged lines on external monitor in 720P project???

I just a purchased a Panasonic BTLH1700 to use as a braodcast monitor with Final Cut Pro 6 and even though the monitor and my FCP project are 720p mode, I'm still seeing jagged lines. I thought that was usually a 480i issue.
When you're working in a 720p project, should you be seeing jagged lines as in interlacing on the Panasonic LH1700???
Please help. Thanks very much in advance,
- Nicholas
PS: The monitor is connected to my computer via component cables and a BlackMagic HD Pro card. Should I be looking instead at Matrox MXO??? I also used the SDI port and still have jagged lines on the external monitor.

Hi Shane,
Thanks very much for your help. As far as I know, no, there is no downconversion occurring. I went into the Blackmagic settings in general systems preferences, and there is no downconversion selected.
So I don't know what's causing this. But would I be better off if I sold my BlackMagic HD Pro card and instead purchased a Matrox MXO? I've heard a lot of good things about it.

FCPX Project Viewer External Monitor

Similar Messages

Maybe you are looking for