FCPX says disk almost full - but 5.7GB are free

I bought a G Raid 8TB Thunderbolt external drive and moved all of my project ove rto it to increase performance.  I am in th emiddle of creating multicam clips and at 97% FCPX is saying that the drive is almost full yet there is plenty of room left.  Any ideas?
(2) 6 TB eSata Drives
(1) Thunderbolt Display
(1) Thunderbolt GRaid 8TB Drive
(1) Lacie Thunderbolt/eSata Hub
All updates current
OSX 10.8.2
2.3GHz Intel Core i7 Macbook Pro
16GB 1333 MHz DDR3
Thanks
Derek

5.7GB free on the new 8TB Thunderbolt.  The project and events associated with this job are on the 8TB drive.  The drive was specifically bought for this client's project.  There is 1gb free on the main HD and muliple TBs free on all other drives.  No reason for FCPX to state any drive is almost full and there was only one set of clips left to process as multicam, 8gb of material in al for this one multiclip. 

Similar Messages

  • Startup disk almost full but cannot log on to delete items

    when I start up my MacBook air it said "start up disk almost full" but I cannot even log on my act to get to my home screen to attempt to delete stuff... what do I do?

    Step 1   
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later. 
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.

  • I have installed Photoshop element 12 trail version in my system and i worked also for some days but it given error that "cannot load default brushes because scratch disk is full " but scratch is 158GB free

    Hi,
    I have installed Photoshop element 12 trail version in my system and i worked also for some days but it given error that "cannot load default brushes because scratch disk is full " but scratch is 158GB free why whats the problem am not getting.

    That thread helped for a time.  But now it seems as though my computer is back to slow again.  But, some of the jargon is over my head as well.  Not sure I knew quoite everything they were talking about.  But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again.  Thanks so much.

  • I am trying to update my iPhone and it says disk utility full but there is nothing on my computer no files etc

    it always says disk utility full although there are no files saved on my computer, how and where are these files storing because i can never do anything on my macbook air

    and i am trying to update my phone which i can't due to tipis

  • "Startup Disk Almost Full" But 190gb Free?

    So I recently downloaded a program (MCMap Live) to make an image of my Minecraft world.
    I ran it the first time and it took up all my RAM like expected, but gave me issues.
    So I try to run it again without any other programs besides Finder running and my Mac started puking out this error that my startup disk was almost full and I had to kill some apps or delete files.
    I open Finder and it tells me I have over 190gb of free space...
    I ignored the warning and after the program was finished and I restarted, my airport card stopped working. So I restart again.
    The airport card turns back on, but now I can't run any intensive programs because that error about my startup disk keeps coming back and shutting them down.
    Does anyone know what is going on and how to fix it?
    MacBook Pro Late 2008
    2.53GHz
    4G Ram
    320 Gb Hard Drive
    Snow Leopard 10.6.8
    Thanks in advance.

    So I recently downloaded a program (MCMap Live) to make an image of my Minecraft world.
    I ran it the first time and it took up all my RAM like expected, but gave me issues.
    So I try to run it again without any other programs besides Finder running and my Mac started puking out this error that my startup disk was almost full and I had to kill some apps or delete files.
    I open Finder and it tells me I have over 190gb of free space...
    I ignored the warning and after the program was finished and I restarted, my airport card stopped working. So I restart again.
    The airport card turns back on, but now I can't run any intensive programs because that error about my startup disk keeps coming back and shutting them down.
    Does anyone know what is going on and how to fix it?
    MacBook Pro Late 2008
    2.53GHz
    4G Ram
    320 Gb Hard Drive
    Snow Leopard 10.6.8
    Thanks in advance.

  • Startup Disk Almost Full (but it isn't!)

    Hello all,
    I've had a problem recently with my iBook G4 where I get a warning that my 'start up disk is almost full' every hour or so. The thing is, when I look at the Finder (or the Activity Monitor) it shows I have almost 8 gigs of hard drive free (and usually 200 plus megs of memory.)
    I recently was advised that I needed more RAM, as the person thought maybe system resources were taking up my extra memory, so I put in 512. This seemed to make the problem less frequent, but has not stopped it (it was happening multiple times an hour prior to the memory upgrade.) Incidentally, I do keep my firmware updated.
    Also, for what it's worth, I try to keep as few applications open as possible--this will happen when I am only running iTunes and Safari.
    I suppose it's not the end of the world to have the warning pop up all the time, but it is pretty irritating.
    All suggestions welcome.
    Thanks,
    Ben

    Hey Ben!
    What size hard drive is inside your iBook?
    It's recommended to have 10% free space at minimum and 25% for "optimal" performance.

  • TC says disk is full, but it isn't

    Hi There,
    My 500 GB Time Capsule now and then gives me the message "Disk is almost Full" (roughly translated from dutch) and states that older backups will be overwritten.
    When I check disk however, there still is more then enough space left (something like 240 GB).
    Is there something wrong? Are older backups overwritten? Is there a setting I've mist, where you can set the maximum backup usage size?
    Thanks in advance,
    Benjamin

    I get this error message or I get "The backup is larger than the available space" (which it isn't).
    I have no idea what the solution is but I'm done with Time Machine and Time Capsule, I'm switching my 1TB TC to a NAS and reverting to Mac Backup at least that way I can restore libraries simply rather than having to remember file names etc.

  • Its saying startup disk almost full. have no music or photos on computer. how do i clear it up and free up the HD

    its saying startup disk almost full. have no music or photos on computer. how do i clear it up and free up the HD

    There are some items to the right of these reply boxes,
    of them a few are likely to be of help to some extent...
    Without knowing which OS X version, advice will be not specific
    and to answer three different ways when one of them is correct
    is a waste of time.
    Is your OS X newer than Lion 10.7.5? IF so different rules apply
    to finding out what is free space, where it is, & how to tell if it is.
    For systems older than Lion (Snow Leopard, Leopard, Tiger, Panther)
    the rules are a little different, since there would not be an Other item
    on the hard disk drive which could contain items necessary to the OS
    yet not detailed to the user.
    And Lion 10.7 has a few hidden files that are hard to locate, and one
    of them may have some bearing on the missing space of a HDD.
    The items here, mostly for 10.7:
    https://discussions.apple.com/message/24954432#24954432
    start up disk full, other options:
    https://discussions.apple.com/message/11808734#11808734
    There are Support articles, you could use Help viewer in the
    system, on your computer, to look for results; or use google.
    However, avoid the temptation to use a badware such as cleanmymac,
    mackeeper, and others that are sources of known trouble to the Mac.
    Good luck & happy computing!

  • My iPhone 4 is very slow and lagging bad. It also says storage is almost full but I have a lot of storage left? Please help

    My iPhone 4 is lagging bad and is taking forever to send messages , it also is saying that storage is almost full but i have 1.5GB left on my 6.3GB. Please help I have tried doing a soft restart by holding the home and power button that didn't help. Please help me

    Yes I have I've deleted all my apps I had on it except the ones I can't and I have deleted most of my photos..

  • My macbook air won't load.  Says start up disk is full but I can't get the home page to open

    My Macbook air won't load.  Says the start up disk is full but won't open the home page so I can do anything about it

    Step 1   
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later. 
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.

  • How do I erase things from my start up disk? My computer says its almost full.

    How do I erase things from my start up disk? My computer says its almost full. 

    See Here...
    what-to-do-when-your-hard-drive-is-full.html

  • Disk almost full

    How do I fix this? I have this message that keeps popping up that says, "Start up disk almost full." I have reset my cache in safari, deleted as many photos as I could, but it still says the same thing. What should I do? Thanks so much!
    Also, I looked at my macintosh HD info and this is what it says:
    Capacity: 148.73 GB
    Available: 3.88 GB
    errr.. I really don't have much stuff on my computer.. I have a few movies and tv shows. How can I save those?
    Message was edited by: lschat

    also see this:
    Your Mac needs adequate hard drive space to operate normally. How full can a drive be before it's too full? There is no hard and fast rule that says “X” amount or “%” of free drive space is needed. A low amount of RAM requires more drive space for Virtual Memory’s swap files.
    Problems from insufficient RAM and free hard disk space are discussed in this link
    http://www.thexlab.com/faqs/lackofram.html
    Here’s some general guidelines for minimum hard drive free space:
    1. As a general rule, your available space should be 5GB as an absolute minimum as it generally requires that much free space to perform an Archive and Install of Mac OS X and still preserve some free space for VM swap files.
    2. Some say that your hard drive should have at least 5% of it's capacity available for use. Still others say 10% to 15%. If you routinely process complex graphics and videos, even more space is required.
    Look at these links about freeing up more space.
    Where did my disk space go?
    _*http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=770243*_
    Download & use WhatSize described in this link or Disk Inventory X @ _*http://www.derlien.com/*_
    Freeing space on your Mac OS X startup disk
    _*http://www.thexlab.com/faqs/freeingspace.html*_
    Amazing Disappearing Drive Space
    _*http://www.pinkmutant.com/articles/TigerMisc.html*_
    Increase HD Free Space
    _*http://macosx.com/forums/howto-faqs/275191-how-easily-increase-hd-free-space-lap top.html*_
    How to free up my disk space
    http://www.macmaps.com/diskfull.html
    JGG

  • How do i solve the 'start up disk almost full' problem?

    when i turn on my macbook air, it comes up with a warning message that says 'start up disk almost full' and that i need to clear some space, how do i do this?

    For information about the Other category in the Storage display, see this support article.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • How can I find where this came from? - start up disk almost full

    Hi, my mac began saying this to me today "Start up disk almost full"
    So I began deleting files. I deleted a lot via DiskWave.
    But now Diskwave says I have enough space but my mac sure doesn't.
    What do I do? What's all that 'other' stuff and where can I find it?
    Thanks in advance!

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • HT3680 My 3 year old iMac is freezing and I get a message "startup disk almost full for running applications. delete files..." Where do I find the startup disk and what should I delete?

    My 3 year old Mac is having trouble and freezes up from time to time lately. I get a message saying "startup disk almost full, delete files ..." something about having enough room for applications to function.  I know my startup disk is the Macintosh HD, but what kind of files do I need to delete and how much space do I need to free up?  In my "about this mac" area, it says I have 4.89gb free out of 319.21  So I am confused why I need to do this.

    You're less than 2% free and should always have at least 15% (my SWAG). Best is to get an ext FWHD and move stuff from the startup disk to it and delete it from that. Best things to move are movies, music, and photos, using the apps that manage those things.

Maybe you are looking for

  • Hp Laserjet 1012 Printer will not print

    All of a sudden, my printer will not work. Maybe it has to do with the new Canon scanner I just bought and installed(?). Anyways, did the usual (deleted all printers, downloaded and installed updated driver, added printer (verified on System Profiler

  • How do I stop a CCC partition auto mounting in Lion

    I have an external USB drive with 2 partitions. The first partition has a CCC Clone of my drive before Lion. The second is used for Time Machine. This drive auto mounts on boot which is fine but the CCC partition causes problems with the App Store as

  • Using DBMS_LOCK to serialize the execution of packages

    Hi everybody, I'm having an issue with a new process that I'm working on and would love to get some feedback from the Oracle community on the best way to approach this. I am going to be receiving hundreds of flat files on a nightly basis that need to

  • Delivery not shown in MD04

    Hello, I have created STO with UB document type and created a dely in supplying plant. STO is displayed in MD04 in both the plants before delivery.After delivery is done it is not displayed in supplying plant but STO PO is displayed in receiving plan

  • PO display through Portal UWL....

    Hi,       In R3-SAP inbox User can able to approve and see the PO throught workitem attachement are working fine. In Portal UWL user can able to approve the PO.But not able to see the PO.The Attachments is not showing in UWL. Same case for PR also. I