FCPX sluggish, not rendering

I've been successfully editing a project in FCPX (latest version) for three weeks. Now, suddenly, it has become very slow and is no longer rendering. I've trashed the preferences, repaired the permissions, restarted, but nothing seems to help -- still slow, still not rendering. I have a 27" iMac with latest OS. My media files are on a separate hard drive. I should have plenty of memory. Why should this work just fine for weeks and then suddenly go South? I don't know what else to do and I'm heavy into editing an important project. Help!

I'm doing a project that involves a lot of stills with greenscreen, so basically the entire video is done with virtual backgrounds. This has worked fine -- the key is actually quite good. As I pointed out, I was zooming along doing very well with this, even succeeding in working with 4-5 layers of video. Then suddenly, two days ago, without me doing anything different, it got very sluggish and finally reached a point where it wouldn't render anything. It just sat. I've trashed the preferences, repaired the permissions, restarted, etc., I had even gone on line to get help and did everything they suggested (which was trash the preferences) and after our first session it actually worked better for a couple of hours. However, after rendering my work, the next day the same thing started all over again. I'm at the point now of having to work off the computer in my office, edit a little, burn a Quicktime movie, and place that on the time line in a new Event/Project, and move back and forth from home to work -- which, obviously is going to be a pain in the ***. I would just like a simple explanation of why it all of a sudden stopped working -- and what I can do to fix it.

Similar Messages

When rendering a project, FCPX did not stop at 100% but appeared to keep rendering - when it reached eleven thousand something, I quite FCPX (it allowed me to quit).

When rendering a project, FCPX did not stop at 100% but appeared to keep rendering - when it reached eleven thousand something, I quite FCPX (it allowed me to quit).

The background tasks indicator just kept going and going... 200, 300... 400... 600...800... When I opened the background tasks window, the only process it said was active was rendering.
I clicked on "stop" but it ignored me, kept counting on and on.... 1000... 2000,,, 5000 I clicked Pause, it didn't ignore me but still kept counting... 7000... 10,000...
I went to my activity monitor on my mac and from what it said (like, 97% or so idle), I surmised that it actually had stopped rendering. So I quit FCPX - no problem, no "not responding" or "force quit" or anything.
My external harddrive was still whirring (that's where my project is stored) so with much trepidation I ejected it: no problem...
After my question I (agian with much trepidation) opened FCPX, did some editing, rendered, exported, without problems.
But I'm concerned about what might have caused this bizarre behavior and what to do if it happens again.
any thoughts???

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Project is not rendering

My project is not rendering. The orange colored indicators in the timeline will not go away.
The background task window was spinning for at least two hours without giving the percentage. Now- I don't know how- it just indicates 58 percent. It's not spinning and has not changed since last night.
I searched for a way to start and stop rendering. I couldn't figure it out.
I'm working with an iMac 3.4 GHz Intel Core i7, Mac OS X Lion 10.7.2. My video is on a Pegasus R4 external drive connected via Thunderbolt.

Exactly, it slows down FCPX, I only render when I need to, and about slow, it is best to keep only one project available. Here is good and cheep Software to move project from FCPX
http://assistedediting.intelligentassistance.com/EventManagerX/

Image not rendering properly on timeline

I'm working on an animatic using still images. Occassionally, I need to scale in or move the image a bit. This means FCPX has to render the image, which it usually does, but I am finding that in some cases, the image appears blurry when played at normal running speed, but when I pause, it's nice and clear. Why is the image not rendering so that it plays clear when running? The orange bar is not displayed to suggest it needs to render still.

Uh, yup, that sure solved it. Thanks Tom.

JSF Pages are not rendering correctly when loaded using Non JSF actions

Hi All,
This problem is irritating me and I am posting the same query for the third time here.
When I come from non jsf actions such as page submitting using Javascript, clicking anchor link, clicking normal Html submit button and so on my page is not rendering correctlly .
In other words, My first GET method/Post method works perfectly for the first time when the page is loaded.
But when we try to access the page for the second time, although logical work is perfect in bean, I am getting same old page.
How to resolve this issue?
or
Is this Bug of Sun's Implementation of JSF Framework.
Thanks,
Sudhakar

Hi Sudhakar,
There is a discussion about refreshing a page, Take a look at the below thread
http://swforum.sun.com/jive/thread.jspa?threadID=55660
Hope this what you are looking for
MJ

Why is my .psd file not rendering correctly in ae

Some layers of the .psd document are not rendered correctly. However they are imported.
The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
I am kind of clueless as to what is causing this issue.
Kind regards,
Jelle

Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
Further details:
-photoshop cc and after effects cc.
-macbook pro retina
If still not clear enough, please tell me what details you are looking for furthermore

SSRS report does not rendering properly in sharePoint 2013

Hi everyone,
I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
expected, some data mix-up on the matrix table
The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
Window server 2008 R2 with service pack 2
SQL server 2012 enteprise with service pack 2
SharePoint 2013 (no service pack) with integrated mode on the report service
Visual Studio 2010 development tools
I'm very appreciate for anyone can provide any solution to solve this issue.
Thank you so much,
Dac.
P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
But the Indent on IE and summation still persist in both browsers.

Hi everyone,
The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table.
Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
matrix table ... and the summation showed correct (it's so weird)
For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
Could someone can enlighten me please?
Many thanks.

LIbrary thumbnails not rendering

I have dozens and dozens of thumbnails in library grid that do not render. The boxes show up as empty grey squares with keyword icons among others. There does not seem to be any pattern or reason that some photos render fine and others do not. If a photo is taken to develop mode then the thumbnail renders as the photo loads in the main window, otherwise the same photos that are all grey in library view are grey in develop view until the individual photo is loaded. Closing LR and reopening it seems to cause any photo which was originally not rendered but then forced to render in develop to go back to the unrendered state.
This is driving me crazy as I cannot count on LR to display the images I have in the catalog. Syncing a folder which has many of these unrendered previews does not indicate any missing files.
Help.
Lightroom 3.2 64 bit
Windows 7
Catalog w/ about 18000 images upgraded from LR 2.7

Check other threads in this forum. I recall this is usually caused by a bad display colour profile. This is apparently more common with some Windows systems.

Inserting new row in Table in 11.1.2 from 11.1.1.3 not rendering table!!!!!

Hey Guys, my status might say noob but i am well seasoned in ADF. We migrated from 11.1.1.3 to the new JDEV 11.1.2. We are doing a test run before we commit to it.
I noticed the following:
We have master detail forms that work flawlessly in 11.1.1.3 when we ran the app under 11.1.2 we noticed that any time you try to add a new row to a table the table does not render. The server logs show the action going through and the count goes up one but the table is not rendered anymore it disappears!!!!!!!!!!!!!!
Now all of this was imported from the 11.1.1.3. all of our tables that have createInsert actions on them are doing this.
If i drag the tables again and set them up from scratch it seems to work fine. Our issue is we have a good 300 of these tables in different panels and panel collections. we have to do all of that work all over again.
No errors show in the log. IS THIS A BUG???????????????
UPDATE: REFRESHING THE PAGE using the Browser Refresh Button Will show the new ROW....... THIS IS NOT GOOOD!!!
Edited by: user8333408 on Jul 7, 2011 9:23 AM
Edited by: user8333408 on Jul 7, 2011 9:24 AM
Edited by: user8333408 on Jul 7, 2011 10:08 AM

Thanks for the reply.
The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
Basic Page layout:
SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
the panel collection has a toolbar with 2 buttons in it.
My issue varies:
Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
other tables do the following:
Hit Create insert == > table shows normally and I can enter new record.
Hit undo ==> table count goes down but table does not render at all anymore.
for this issue i noticed if i set cache results to false the table works after hitting undo
IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
NO ERROR MESSAGES even at finest level are thrown.
I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
Edited by: Nottallah on Jul 11, 2011 9:48 AM
Edited by: Nottallah on Jul 11, 2011 9:51 AM

Safari not rendering a page correctly

A webpage I created in Dreamweaver uses drop down menus that are supposed to display just to the left of the link they drop from. In all other browsers they work correctly, but since the latest upgrade in Safari to 3.0.4 as a part of OS 10.4.11 on my Macbook, they are not rendering correctly. Instead they are appearing much further to the left where it's difficult to move the cursor to them before they disappear. Until I changed the color of the drop downs they were disappearing into the background. Any ideas why Safari is not rendering them correctly? I'd like to keep Safari as my primary browser, but if it won't render my own page correctly, what other pages might it be messing up? Address of the page is http://www.montgomeryschoolsmd.org/schools/woottonhs/ The drop downs are connected to the central column list that has small arrows beside the words. They will probably work correctly for you, but won't for me in Safari. What can I do to fix it?
Thanks,
KWolfrey

Hi,
I'm running 10.4.11 with Safari 3.0.4 and as far as I can see the menus seem to work just fine here.
Do you have a custom stylesheet set in Safaris advanced preferences? (Some Safari enhancer applications set one even if you didn't manually set one so double check to make sure.)
Also, do you use PithHelmet?
One quick test you can do to help narrow down things is to try Safari in another user account. This will help us to know whether your problem is local to your account or system wide. If you don't have another account you can use System Preferences -> Accounts -> \[+\] to create a test one (and \[-\] to remove it if needed)
Lastly, I doubt these [errors|http://validator.w3.org/check?uri=http%3A%2F%2Fwww.montgomeryschoolsmd. org%2Fschools%2Fwoottonhs%2F&charset=%28detect+automatically%29&doctype=Inline&g roup=0] have anything to do with your problem since it seems to work fine for me, but you might want to look into them at some point.

h:messages tag not rendering right

Hi All,
I have an <h:messages /> tag in my jsf page and it's not rendering correctly.
This is the tag in my page, verbatim:
<h:messages />
And this is the output when validation errors are created:
Validation Error: "lastName": Value is required. Validation Error: "firstName": Value is required.
That's it. No List, no nothing, just space-delimited validation errors!
When I specifiy layout="table", things are fine, but specifying layout="list" doesn't solve the problem.
I'm using v1.1 of the jsf implementation.
What gives?
Thanks,
John

I got the exact same problem.. Is this already logged as a bug in JSF?

Page is not rendering as per requirement request

Hi All,
Basically Here is the scenario.
Based on selectoin of particular service item from combo box(dropdown list), We are creating the JSF controls dynamically on new page for further process.
We are maintaining the controls information in database that need to be created dynamically and rendered for each service.
And I am able to create the controls dynamically and able to place them on page perfectly.
Until here everything looks ok for me.
But main problem I have identified is when I go for new request, I am getting the same old page when I select the other service.
Initially I though this could be a problem of caching and I have placed meta info in order to expire the page. But that was no use.
So I logged all the data that is coming from database and logged the information where I have created the controls dynamically..
What I have identified is I am getting the right data on paricular service selection and even I am able to see that methods execution is correct. I was stunned and not able to understand why the JSF is not able to show the controls.
So I searched the JavaDoc for solution. I though I could use FacesContext.release() method. But that does not help me. Even I tried to clear the parent objects using gridpanel1.getChildren().clear(). Even that does not supported me :(
In order to understand my problem, here I am pating the code.
Please help me why the hell my page is not rendering
Below is code in constructor
javax.faces.context.ExternalContext ec = context.getExternalContext();
            javax.servlet.http.HttpServletRequest request=(javax.servlet.http.HttpServletRequest)ec.getRequest();
            String service=request.getParameter("form1:cmbServices");
            int serviceid=-1;
            if(service!=null) {
                serviceid=Integer.parseInt(service);
            gridPanel1.getChildren().clear();
            controls =getControls(serviceid);
            HtmlControl[] controlArray =controls.getHtmlControls();
            //log(controlArray.length+" Length");
            for (int i =0;i<controlArray.length;i++) {
                HtmlControl control =controlArray;
//log(control+" Control");
//log(controlArray.length+" Length");
if (control.isRadio()) {
addRadio(control);
//log("Entered here in adding radio");
else if (control.isCheckBox()) {
addCheckBox(control);
//log("Entered here in adding checkbox");
else if (control.isTextBox()) {
addTextBox(control);
//log("Entered here in adding textbox");
here is the code for dynamic creation of controls
private void addRadio(HtmlControl control) {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue(control.getDescription());
        String desc =control.getDescription();
        desc=desc.replaceAll(" ", "_");
        outputText.setId(desc);
        outputText.setStyleClass("bodyText");
        HtmlSelectOneRadio radio = new HtmlSelectOneRadio();
        radio.setBorder(0);
        radio.setLayout("pageDirection");
        //radio.setId("Radio_"+control.getId());
        radio.setId(control.getName()+"__"+control.getId());
        UISelectItems items = new UISelectItems();
        Radio objRadio =(Radio)control;
        // vectDefaultSelectItemsArray
        DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
        vectDefaultSelectItemsArray.add(objArray);
        //log("vectDefaultSelectItemsArray :"+vectDefaultSelectItemsArray.size());
        arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
        int size =arrays.length;
        arrays[size - 1].clear();
        for (int i =0;i<objRadio.getValues().size();i++) {
            arrays[size - 1].add(new SelectItem(objRadio.getValues().get(i)+"",""+objRadio.getTexts().get(i)));
        // array.setItems(new String[] {"Yes","No" });
        items.setValueBinding("value",getValueBinding("#{consumer$jobInfo.arrays["+(size-1)+"]}"));
        radio.setStyleClass("bodyText");
        radio.getChildren().add(items);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(radio);
        parent.getChildren().add(gridPanel);
    private void addCheckBox(HtmlControl control) {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue(control.getDescription());
        outputText.setStyleClass("bodyText");
        String desc =control.getDescription();
        desc=desc.replaceAll(" ", "_");
        outputText.setId(desc);
        HtmlSelectManyCheckbox checkBox = new HtmlSelectManyCheckbox();
        checkBox.setBorder(0);
        checkBox.setLayout("pageDirection");
        //checkBox.setId("CheckBox_"+control.getId());
        checkBox.setId(control.getName()+"__"+control.getId());
        UISelectItems items = new UISelectItems();
        CheckBox objcheckBox =(CheckBox)control;
        // arrays[0]=new DefaultSelectItemsArray();
        //arrays[0].clear();
        DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
        vectDefaultSelectItemsArray.add(objArray);
        //log("vectDefaultSelectItemsArray :"+vectDefaultSelectItemsArray.size());
        arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
        int size =arrays.length;
        arrays[size - 1].clear();
        // array.clear();
        for (int i =0;i<objcheckBox.getValues().size();i++) {
            arrays[size - 1].add(new SelectItem(objcheckBox.getValues().get(i)+"",""+objcheckBox.getTexts().get(i)));
            //     array.add(new SelectItem(objcheckBox.getValues().get(i)+"",""+objcheckBox.getTexts().get(i)));
        // array.setItems(new String[] {"Yes","No" });
        items.setValueBinding("value",getValueBinding("#{consumer$jobInfo.arrays["+(size-1)+"]}"));
        checkBox.setStyleClass("bodyText");
        checkBox.getChildren().add(items);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(checkBox);
        parent.getChildren().add(gridPanel);
    private void addTextBox(HtmlControl control) {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue(control.getDescription());
        String desc =control.getDescription();
        desc=desc.replaceAll(" ", "_");
        outputText.setId(desc);
        outputText.setStyleClass("bodyText");
        HtmlInputText textField = new HtmlInputText();
        // textField.setId("textField_"+control.getId());
        textField.setId(control.getName()+"__"+control.getId());
        HtmlOutputText outputText1 = new HtmlOutputText();
        outputText1.setValue(" ");
        outputText1.setStyleClass("bodyText");
        textField.setStyleClass("frmObjects");
        gridPanel.setColumns(3);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(outputText1);
        gridPanel.getChildren().add(textField);
        parent.getChildren().add(gridPanel);
here is my after render response method
protected void afterRenderResponse() {
        //job_selection_templateRowSet.close();
        jiya_html_controlRowSet.close();
        FacesContext.getCurrentInstance().release();
here is my getValueBinding method
private ValueBinding getValueBinding(String expression) {
        return     FacesContext.getCurrentInstance().getApplication().createValueBinding(expression);
    }Thanks
Sudhakar.

Hi,
You can try the following to debug and provide us more details.
1. I am assuming you are trying to navigate by using a commandLink/Command Button ? If so, is the action handler for the command getting called ?
2. Do you have input components in the page with Validators/converters attached to them ? If so, you may not watch for validation/conversion errors. If there are errors, the same page will be redisplayed. In that case you would need to associate message component to get more details on what went wrong.
3. Have you set up the necessary navigation rules to navigate to the right page ?
4. When you are adding components programatically, its better to assign explicit id's to your components, to avoid any unexpected behavior.
Hope this helps.
Regards
-Jayashri

PanelGrid with binding attribute not rendering when event on page fires

I am having a similar issue with my components not being rendered from a dynamic binding attribute as described by this post:http://forum.java.sun.com/thread.jspa?threadID=671672 but for different reason. I have combed the forum and other sources for a week now, tried numerous variations of this based on suggestions I've read for rendering dynamic components and am unable to find the problem. I would appreciate guidance as I don't know what else to do and I imagine there is something basic about the JSF flow layout or component classes I am not doing correctly.
From a high level, I have a page with two panel groups. The first contains a list of command links (like a menu) that have an actionlistener that populates a list of QueryVariable objects called filterCriteria in the backing bean based on the selection made and then calls a function to update components in the second panel. The second panelGroup contains a panelGrid with a binding attribute that constructs a dynamic set of input fields based on the content of the filterCriteria list. When I first naviagate to this page from another page, the fields are rendered properly. However, if I then select a commandLink from the menu, the panelGrid disappears and is not rendered.
I've stepped through the code in a debugger and my actionlistener is called when I select a command link. However, the binding attribute method is not called at this time, so I added a direct call to it from the action listener. I know the actionlistener is working because I've verified it in the debugger and if I navigate away and come back to the page, then the binding method is called and the new selection is reflected in a rendered panelGrid. Why is it not rendering though when I first select the commandLink and the page is updated. Also, fyi, there is an action method for the commandlinks but it returns null;
FWIW, I'm using MyFaces and Facelets in my application.
Below is my code. This is inside a managed session bean:
JSF Snippet:
<h:panelGrid id="inputVarsTable" columns="3" binding="#{query.table}"/>
     public HtmlPanelGrid getTable() {
          if(table == null)
               table = new HtmlPanelGrid();
          return constructSearchInputTable();
     public void setTable(HtmlPanelGrid table) {
          this.table = table;
// Updates table component to reflect filterCriteria
     public HtmlPanelGrid constructSearchInputTable()
          HtmlOutputLabel outLabel;
          HtmlOutputText outText;
          HtmlInputText inText;
          HtmlMessage message;
          List<UIComponent> children;
          ValueBinding vb;
          FacesContext facesContext = FacesContext.getCurrentInstance();
          UIViewRoot uIViewRoot = facesContext.getViewRoot();
        Application application = facesContext.getApplication();
          children = table.getChildren();
    children.clear();
          try {
               for (int i = 0; i < getFilterCriteria().size(); i++) {
                    QueryVariable var = getFilterCriteria().get(i);
                    String id = "var" + i;
                    //<h:outputLabel for="#{var.name}" styleClass="label">
                    outLabel = new HtmlOutputLabel();
                    outLabel.setFor(id);
                    outLabel.setStyleClass("label");
                    // <h:outputText value="#{var.name}" />
                    outText = new HtmlOutputText();
                    outText.setValue(var.getName());
                    outText.setParent(outLabel);
                    outLabel.getChildren().add(outText);
                    outLabel.setParent(table);
                    children.add(outLabel);
                    //<h:inputText id="#{var.name}" value="#{var.value}" required="true" />
                    inText = new HtmlInputText();
                    inText.setId(id);
                    String bind = "#{query.filterValues['" + var.getName() + "']}";
                    inText.setValueBinding("value", application.createValueBinding(bind));
                    if(var.getDefaultValue() == null)
                         inText.setRequired(true);
                    inText.setParent(table);
                    children.add(inText);
                    //<h:message for="#{var.name}" styleClass="errorText"/>
                    message = new HtmlMessage();
                    message.setFor(id);
                    message.setStyleClass("errorText");
                    message.setParent(table);
                    children.add(message);
          } catch (Exception e) {
               log.error(e);
          return table;
// Command Link Menu ActionListener
     public void structuredQuerySelection(ActionEvent e) {
          queryType = QueryType.StructuredQuery;
          UICommand cmd = (UICommand) e.getSource();
          filterSelection = (String) cmd.getValue();
          Map<String, SearchRequestCtx> queries = pdp.getGenericMetadata().savedQueries;
          SearchRequestCtx ctx = queries.get(filterSelection);
          filterCriteria = new ArrayList<QueryVariable>();
          filterCriteria.addAll(ctx.getVariables());
          constructSearchInputTable();
     // Command Link Menu Action
     public String selectStructuredQuery()
          return null;
     }BTW, this is my first post and I don't really know how that Duke Dollar thing works but I'm happy to offer some to anyone that can solve this issue for me.
Thanks,
Ken

Glad to hear I am not the only one struggling with this type of issue.
I tried your suggestion but it caused a NoSuchElementException when the page tried to render. Stepping through the code, the init function is always called after my panelGrid is constructed. I even commented out the logic to clear the children and confirmed that in the constructed page, the outputText component that binds to init is the first element on the page - right after the opening body tag. Maybe, JSF doesn't necessarily construct the page in top to bottom order? Also, the exception makes me think that this gets called too late in the lifecycle to work. Were you able to get this to work?
java.util.NoSuchElementException
     at java.util.AbstractList$Itr.next(AbstractList.java:427)
     at com.sun.facelets.FaceletViewHandler.encodeRecursive(FaceletViewHandler.java:515)
     at com.sun.facelets.FaceletViewHandler.renderView(FaceletViewHandler.java:445)
     at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:300)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:110)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:482)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:825)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:738)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:526)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)Ken

JSF page not rendered in Design View (JDev 11.1.2.1.0)

Hi!
Recently strange behavior in JDeveloper 11.1.2.1.0) begins: JSF pages in some projects are not rendered anymore. We enabled "Show Design time Messages in log" in JDev Tools/Preferences/JSP and HTML Visual editor and message
WARNING: A problem was encountered executing the page. Using fallback rendering is shown in log. This is visible on this snapshot:
[http://dl.dropbox.com/u/14304804/design_view_problem.jpg|http://dl.dropbox.com/u/14304804/design_view_problem.jpg]
What is common to all of the projects with this issue is that we run "Remove ADF Security Configuration" which was enabled before and we implemented our custom security using phase-listener.
Any idea what is wrong here?
Regards,
Sašo
Edited by: Sašo C. on May 21, 2012 2:24 PM

It's a limitation, if you will, of the way JDeveloper works. It essentially runs your JSF page in order to get the rendering. At design time, the phase listener is obviously messing things up since you're not in a proper secured environment - hence the workaround to bypass your phase listener at design time.

FCPX sluggish, not rendering

Similar Messages

Maybe you are looking for