Fcpx trying to mark in and it sound like i can't do it. why?
fcpx 10.1-- trying to mark( in ) or (out)and it sound like i can't do it. why?
Are you working in the Import window or marking clips to be entered into the Timeline or maybe Exporting from the Timeline?
Please provide some specific info.
Al
Similar Messages
-
I have a hp pavilion dv-7 i tried to run recovery and it keep shutting down can anyone help me why
i have a hp pavilion dv-7 laptop everytime i turn it on it will turn off even when i turn it on in safe mode it turn off what can cause that
It sounds like it could be a problem with the fan and cooling, I would suggest calling 1-800-hp invent to have it serviced.
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue. -
When I start my macbook I get the gray screen and gear. I've tried to safe start it and it sounds like it's going to start but then shuts down. I don't have any other products connected to it. Any suggestions?
Did you recently install any updates?
Do you have your original install discs?
~Lyssa -
I have iphone5 ios6 and the Mic is too sensitive, and calls constantly cut in and out. People tell me there is loud background noise and it sounds like I'm in a wind tunnel. Any background noise, and call completely cuts in and out and sounds as if call is dropping. This occurs all the time, but more noticeable while using earphones with in cord mic. I never had this problem with my old iphone4. Has anyone experienced this, and is there a setting that can correct this problem?
Same problem for me. So bad in fact that I can't really use my headphones for calls. I have tried it with several sets of headphones. My primary are the Bang and Olufsen headphones which were great with the previous iphone 4 and 3.
Apple please address this issue. -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
When using FaceTime, my iMac makes noises. It dings like I am receiving an email and sometimes sounds like a busy signal, but this is while I am talking to someone. Any suggestions?
Dear Mr. Toad (my all-time favorite ride at Disneyland ;-) ..
Thanks so much for your detailed reply.. my netbook is in the bedroom, turned off.. I (so far) only use it in the evening, in the bedroom.. I've saved your response, and will try your suggestions, and let you know if they solve the problem I described. I really appreciate you taking the time to post such a detailed reply..
I can't answer your Thunderbird "configuration" questions, because I'm in the living room, using the crap Vista laptop, on which I plan to install Thunderbird, and then take Windoze Mail out in the street and drive over it a few times.. I'll get back to you one way or the other, and let you know if your instructions solved the problem, or not..
I don't understand why Thunderbird "out of the box", so to speak, simply doesn't forward HTML emails with embedded graphics, (like Outlook Excess, and Winblows Mail do).. without having to go through those steps. I personally HATE HTML email, but over the years, it's become more and more prevelant.. so it's a problem I must fix..
Thanks again..
Harv.. -
I want to record a keyboard connected by usb port and only sound like an ambient microphone. What configuration is wrong? Thank you
The optimum choice is to format it ExFAT, but do so on the PC, not the Mac. Alternatively, you can make two partitions - one for the Mac; one for the PC. Partition the drive using GUID when you make the two partitions. Format one using Mac OS Extended, Journaled. Format the other on your PC using NTFS if you won't need to write to it from the OS X side or use ExFAT if you do.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) you will use for Windows from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to MSDOS.
6. Click on the Erase button.
When you connect the drive to your PC reformat the PC volume to either NTFS or ExFAT. -
The following error message came when I tried to open Firefox and install Firefox Home.
"can't create mcafee plug-in object: TypeError: Components.classes[cid] is undefined"This issue can be caused by an extension or plugin that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]] -
Hi, I just tried to open Word and this message appeared - 'You can't open the application Microsoft Word because PowerPC applications are no longer supported.' I just recently loaded OS X Lion does this mean my software for MS Office is now out of date? Do I have to purchase a new package? Any help appreciated.
Hello:
Office 2004 was written for the PowerPC chip only. There is no emulation in OS X 10.7.
I encountered the same issue sometime ago when I updated to OS X 10.7.
There is one option that I might mention (other than buy Office 2011). I switched to Apple's iWork. Pages (the word processing package) is completely compatible with Word. If you export Pages documents, you can export them in formats compatible with Microsoft programs. iWork also contains programs that are compatible with Office presentation and spreadsheet packages.
The reason I mention this is that the cost is about 1/2 of the cost of Office.
Barry -
“Tried to Download_Adobe_Premiere_Elements_13_Mac 2” and received this error message can’t be opened because the identity of the developer cannot be confirmed.
That's Apple OS X's Gatekeeper feature kicking in. Nothing to do with Adobe.
How to open apps from an unidentified developer in OS X Mountain Lion | iMore -
new airport: can't get my macbook or my imac to join my wireless automatically, my other stuff still joins without problems but i have to join manually with the book and the imac ?? I've tried all the settings and every thing else I can think of.....
Running on Lion, never had a problem before until the old airport died and I replaced it.try connecting the device in _*recovery mode*_, then restore from your backup.
also, make sure [_*Apple Mobile Device Service*_|http://support.apple.com/kb/TS1567] is installed and started.
JGG -
My iPod shuffle stopped working at all. Nither my computer, no iTunes can recognize it. There is no any green light on it and no sounds. I can't charge it.
Try:
Turn on without Home/Power Button -
My G5 is not booting up and it sounds like an airplane taking off. I replaced the 3.6V battery, but it did not correct the problem. Any suggestions??
Resetting the Logic Board
Resetting the logic board can resolve many system problems. Whenever you have a
unit that fails to power up, you should follow this procedure
before replacing any modules.
1 Unplug the computer.
2 Press the Power On button on the front of the unit.
3 Open the side access panel.
4 Remove the battery from the logic board.
5 Wait at least 10 minutes before replacing the battery.
6 Make sure the battery is installed in the correct +/-
direction.
7 Reassemble the computer and test the unit.
Cheers, Tom -
Can you upgrade from 1.3.0.20 small ovf to 2.1 without migrating to a new server? It sounds like you can just adjust the server settings now. I am currently running 1.3.0.20 and I have enough to do with also needing to upgrade my wlc to 7.4.121.0 and getting the MSE up to 7.4.121.0 without having to stand up a new server if I don't have to. Please share any information you have in regards to your experience with coming from a version 1.2-1.3 small ovf and going to 2.1.
Thanks,
AndrewYou are better off standing up a new server. It's cleaner and safer..... you can always try to upgrade if you wish, but if things don't work out well, then you just wasted a lot of time. Snapshot the VM and export the floor plans, just in case. The ova is built around the DB size, so I don't know how well the DB will perform if you try to expand memory or drive space after an upgrade.
Please rate helpful post and Cisco Support Community will donate to Kiva
Scotty -
Whenever I text this one person, his messages come up green. He has an iPhone and so do I, I can't figure out why our messages are green
We've tried reactivating iMessage, deleting threads, and contacts but nothing seems to work. Has this happened to anyone else?Restart both devices (press the HOME and power button until the Apple logo appears then releasae). If both devices have iMessage turned on and to send as SMS when iMessage is not available, the the green messages are indicative of iMessage not being available on one or both devices.
Maybe you are looking for
-
Dear all, I have a couple of Word templates (in document libraries) that should have the filename and page count on the footer of the front page. It seams there is an issue with Word that these do not automatically update (MS kb 832897). I am using w
-
My iPages has frozen up whilst importing a Word file into iPages. I can no longer use this software. has anyone seen this before. Thanks, Ken
-
I was wondering how and what others are doing. My preference was always on single package with multiple Deployment Groups or ADR, since this way I never got duplicate updates reusing the same package and starting fresh every year. What are others do
-
Non-root user can't start Apache on port 443
Today I've been attempting to get SSL working for my Oracle Applications 11i (11.5.10.2) installation and I just hit a small problem. I've followed all of the Oracle literature I've come across, which instructed me to create a new (non-root) user to
-
I just installed windows 8.1 and it wouldn't work
What do I need to do to get iTunes to work again. Since I just installed Windows 8.1. This is stressing me out try to get it work. HELP!!!