FCPX upload to youtube in 1080, but showing up on youtube as 720

I have been using the direct upload to YouTube feature on Final Cut Pro X now for several months and I have never had an issue until now. Today I went to upload a video like I always do, in 1080, and after uploading to YouTube the quality is only showing as 720. Why in the world is this going on when it has always shown up in 1080 for a while now. Could this be an issue on the YouTube side, or is it problem on my end?

Roly001001 wrote:
… after uploading to YouTube the quality is only showing as 720. …  Could this be an issue on the YouTube side, or is it problem on my end?
both of your videos are avail in shiny 1080HD:
so,< Yoda's voice >  patience you must have, young padavan!
YT needs a while to process higher res.
when I upload my 720p project, I can see: first 360 avail, then 480, finally 720 ....

Similar Messages

  • Source Video is 1080 but Export Option Brings it to 720?

    I am trying to export an edited movie, using the Share > Master File (default), but when I do this, it seems to change the movie file from 1920x1080 @ 23.98 fps to 1280x720 @ 59.94 fps.  I've looked around the forums and on general internet searches and can't seem to find a solution.  I've attached 2 screen shots to show the original file as it was imported and edited (1080 @ 23.98fps) and then how it is shown when I try to export (720 @ 59.94fps). 
    I've also gone through with the export think maybe it was a glitch and it did actually convert the video to 720 @ 59.94.
    Somewhat of a newbie to Final Cur Pro X, so excuse my potential ignorance here, but how can I make sure to export as intended in 1080 @ 23.98?  Thank you for any help you can provide.
    Original video size as imported and while editing:
    Export box dialog screen for the same video showing different:

    Russ, that solution seems to have done the trick!  I created a new project within that same event, made sure to select to set the resolution/frame rate to the 1st clip (which was already the default sleceted setting), and saw that it was 1080/23.98.  Then went to share and saw it stayed at 1080/23.98 this time.
    I assumed this would have automatically adjusted to the first clip (since that was what my settings were anyway - set to 1st clip), but evidently it did not.  It seems weird that it would avoid my clips source resolution snd frame rate settings and keep a pre-determined, default value for this.
    Either way, it looks like this has resolved my issue.  In addition to directly importing a clip to start a project, I should start the project 1st and make sure the resolution/frame rate settings are what I want them to be, then import the files - thank you very much!

  • Am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video.  can anyone help?

    am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video.  can anyone help?

    Then it's probably YouTube - have you checked here to see that you're watching the hi res version? It could be that YouTube is choosing an easier version to display based on your internet connection.
    You can see on this screenshot that although the video has up to 1080 specs, my connection is making YouTube show me the 360p version by default.

  • Mozilla (specifically) wont load Youtube videos, or streamed shows, but everything else. Why?

    Most people will readily say this - but I have absolutely no idea what I've done to change any form of settings. However Mozilla won't play any Youtube videos or streamed shows. The screen just stays blank (black). I've uninstalled and reinstalled flash and that didn't fix it, and I've tried most of the troubleshooting options, none seem to work.
    I've opened up Internet Explorer and they have no problems playing any video. It's just Mozilla. I'm not too sure what the issue is. I've googled such problems and any form of related issues seem to want to clear any cache or cookies - didn't work.
    Anyways, any and all help would be greatly appreciated. Thank you

    The most likely cause is the latest Flash update. Please see this article for more information: [[Flash 11.3 doesn't load video in Firefox]].

  • Video playback in YouTube just fine but not Facebook

    Video playback in YouTube just fine but in Facebook very choppy.  Why?  Any fixes?

    hi Brandonacker, you probably need to install the adobe flash player plugin for those sites to show video content, which you can download from https://www.adobe.com/products/flashplayer/distribution3.html (use the windows exe-installer for plugin based browsers)

  • Vimeo or YouTube embedded videos not showing CC on iPhone

    Hello,
    I am building my first site and I am trying to add a short video I created. I have it on both Vimeo and Youtube, with CC in various languages.
    After publishing the site, to preview it on my iPhone 5' Chrome and Safari, I can play the video fine. I even have the option to choose the language (I have 4), but it doesn't matter what language or browser I use, the iPhone's player opens-up and does not show the CC. However, when I go the YouTube app it does show the CC. I think the problem is from my iPhone's video player.
    Having the option for people to choose the CC is very important for the project, I hope you can help me figure-out a work around it.
    I am using Adobe Muse 2014.3
    iMac 10.10.2 Retina 5K
    iPhone 5 Version 8.1.3 (12B466)
    Regards,
    Felix

    Thank you Wyodor, I also believe the solution may be simple, if it helps (and for all you coding experts out there) these are the three video/codes being used. For each code I had to add after "  http:  and before
    //www.youtube to load videos to iWeb using html widget.
    Video One code
    This video on published website - plays using both Safari and Firefox.
    <iframe width="1000" height="563" src="http://www.youtube.com/embed/rrMsYI6XVSw?rel=0" frameborder="0" allowfullscreen></iframe>
    Video Two code
    This video on published website - plays using Firefox but will NOT play using Safari.
    <object width="1000" height="563"><param name="movie" value="http://www.youtube-nocookie.com/v/MDfE087Hgvw&hl=en_US&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube-nocookie.com/v/MDfE087Hgvw&hl=en_US&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="1000" height="563"></embed></object>
    Video Three code
    This video on published website - plays using Firefox but will NOT play using Safari.
    <object width="1000" height="563"><param name="movie" value="http://www.youtube-nocookie.com/v/X5n6M66jgUo&hl=en_US&fs=1&rel=0&color1=0xe1600 f&color2=0xfebd01&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube-nocookie.com/v/X5n6M66jgUo&hl=en_US&fs=1&rel=0&color1=0xe1600 f&color2=0xfebd01&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="1000" height="563"></embed></object>
    If anybody knows the solution to this problem I will be pleased to hear from them. I am not a coding expert!

  • How do i upload a single clip for premiere elements 7 to youtube

    I have Premiere Elements 7 and have created a project/moive containing 10 clips. I want to upload the clips 'separately ' to Youtube. How do I do this.In other words i don't want to move the entrie movie to Youtube- it is far too big.  Thanks.

    Now, I am just guessing here, as I cannot access the Advanced dialog for YouTube, as I do not have a YouTube account, but I would assume that you will get to this choice (Export WorkArea Bar Only) from there. Here it is in the DV-AVI Share/Export Advanced dialog box:
    Hope that the YouTube Share is the same.
    Good luck,
    Hunt

  • Youtube add-ons dont show up under al videos only some

    i have youtube add ons download helper 4.9.15 easy youtube video downloader 6.8 about a week ago i found out they were all gone i re added them but when on youtube they dont always show up under the videos before they were under all of them

    hello water123, please directly contact the extension developers through the means provided at their homepages - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon. thank you...

  • I downloaded a book to my Ipad and when I went to sync with Itunes on my PC- it removed the book from my Ipad, but shows it on the PC.  I have it "checked" to be synced but it still does not show up on my Ipad?  This also happened after I downloaded IOS 5

    I downloaded a book on my Ipad and after syncing to my PC, it was dropped from the Ipad, but shows up on my PC?  I have it "checked" to be synced but it will not come back onto my Ipad.  This is also after I downloaded IOS 5.1 for the Ipad.  Does anyone know why it would be dropped from the Ipad?

    Sometimes simply restarting your iTunes, the computer and the iPad is all that it takes to correct an issue like this so try that. Quit iTunes, reboot your computer, and restart the iPad. Then try the sync again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • After updating my iphone 5 of ios 7, I delete or trash my emails rorm my inbox and they pop back up in my inbox.  How do I fix this?  They are deleted from the main server but show up in my email on my phone and will not stay deleted.

    I recently updated my iphone 5 to IOS 7 and since doing this, i cannot get my email messages to stay deleted when I trash them.  They have been deleted from the main mail server but show up on my phone.  When I trash them, they disappear for a few seconds and then re-appear in the inbox. I tried deleted my mail account from my phone and re-adding it, but this worked for about 12 hours and now its doing it again. I also have shut my phone off and rebooted it but this did not work.  How do I fix this?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    Also consider deleting and reinstalling the Mail Account in question.

  • I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

    I have an old Ipod that won't show up on Windows Explorer but shows in Itunes., I have an old Ipod that won't show up on Windows Explorer but shows in Itunes.

    In iTunes, select the iPod in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.
    There should be a checkbox that says Enable disk use.  Check it and Apply the change.  It should now appear in Windows, when the iPod is connected.
    NOTE:  When Disk Use is enable, you have to eject the iPod (in iTunes) before physically disconnecting it from computer.

  • IPod touch 4th generation will not sync with iTunes, but shows up in Windows 7 64bit(Acer Aspire laptop)

    Hello all, I am writing this message in the hope that somebody can help me to solve my issue with my iPod touch fourth generation. It has been unable to sync with iTunes, but shows up in windows as the iPod touch. I also had this problem with my older iPods as well (Ipod nano 4th Gen, iPod touch 2nd gen(Batteries done for that one)) I can sync music with iCloud, but I have a bunch of songs that are not in the store, and I sincerely want to add those, alot.
    I've checked the "iPod appears in Windows but not in iTunes" with the link here: (http://support.apple.com/kb/TS1363), and followed that process, but to no avail, it does not solve the problem. I've tried to reset the entire ipod by making it enter DFU mode and then rebooting the entire iPod (shows up in iTunes in temporary mode) but once restored, does not appear in iTunes, but still in Windows detected still as a iPod, looks like the iPod and everything. I also have the most uup-to-date iTunes installed (10.5 I believe, just got it today)
    This is extremely frustrating because that is why I purchased the iPod (and for the games and apps, those are great too). The iPod was also purchased three days ago, and the setup still didn't detect it.  I am not mad at anybody here or the Apple company itself, but I have not found any help online with the browsing option (for support of course).
    Please, I would absolutely love the help, i'd be eternally grateful for it.
    -Tyler

    Never mind, turns out that by uninstalling the programs "Megakey" and "Megaupload" it had resolved this issue.

  • New folder is not visible inside my project but shows in Windows Explorer.

    I created a new folder under another folder.  The new folder is not visible inside my project but shows in Windows Explorer.  Also, if I try to add another folder of that same name, it denies the action since the folder (although invisible) already exists.  My co-worker can access the same file (on a share drive) and see the new folder just fine.  This error occurs whether I was the one creating the new folder or she is the one creating the new folder.  I am new to RoboHelp and she has used it for years.  I suspect something is not yet set up right on my side.  Ideas? (I thought I posted this yesterday but I can't find it anywhere)

    Hi there
    What version of RoboHelp are you using?
    Did you create the folder from inside RoboHelp or did you create it using Windows Explorer?
    Cheers... Rick

  • Iphone says not enough free icloud storage for backup, but shows 2.3GB free. Why?

    iphone says not enough free icloud storage for backup, but shows 2.3GB free. Why?

    Thanks for replying.
    Sorted now- thanks

  • My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

    I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
    But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
    You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

Maybe you are looking for