Fcpx with magic bullet green and pink flash frames

Hi I'm using fcpx with magic bullet. all recent updates. an imac 3.4ghz 32gb ram 512ssd drive and 512mb card. I keep getting pink and green flash frames whenever i colour grade in magic bullet.
first 22 secs of project were fine, next day I added to it, flash frames everywhere throughout the entire project. tried everything. is it a bug?
cheers

This problem is completely averted, for me (and reportedly most others), by exporting using "Send to Compressor" rather than using any FCPX presets. That is, no flashes or green/purple/upside-down frames show up in the final output.
I would hardly have believed that the "engine" used in Compressor is different to FCPX - but that is obviously (simplistically) the case.
This is also some confirmation that the problem is with FCPX - not the plugin.

Similar Messages

My iPhone screen turned green and pink and now wont turn on or off and is unresponsive. Tried holding down power/sleep button, tried plugging into itunes, all with no success. HELP!

I was just playing on my phone when it froze. The screen flashed green and pink then I had to hold down the power button until the green and pink slowly faded away. The phone is completely unresponsive. Wont power on or off, isnt recognized by computer

Did you also try to connect in recovery mode, explained here:
iOS: Unable to update or restore

Rendering with magic bullet instant hd advance

i'm trying to change the video resolution on my sd videos to 1080p hd.
what is the best way to do so to get the best results??
the quailty on my sd videos are good.I just wanna make them 1080p and if possiable make the quailty even bettter with magic bullet instant hd advance.

You can't spin hay into gold, so have realistic expectations of what a plug-in can do.
The Red Giant website has a few before and after clips. (But keep in mind, these are best case scenarios) I have had mixed results with Instant HD. It's not a miracle Easy Button.
Here's something I've wanted to test: capture video with a Blackmagic/AJA board and an upscaling DVD player (like a PS3), using 1080i and analog component connection. PS3 has one of the best consumer hardware upscalers available. Hmmmm... maybe I'll try it this weekend. I'll post my results

My ipad screen turned green and pink

my ipad screen turd green and pink help me plssssss.
i restart my ipad2 it dosen't work

Hey jedivan27,
Thanks for the question. I understand that you are having display issues with your iPad 2 and you have already attempted to restart it. To completely isolate the issue, let's try resetting your device as well:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists after a reset, let’s see if we can isolate to software or hardware by backing up and restoring your device as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M.

Green and pink Media. Premiere Pro CC v.8.1

Hi,
i have a problem with my media.
i use XdcamHD 422 50i .mov clips. and one bin with IMX codec.
the sequece setting is Sony xdcam HD422 1080i
but two days ago all the media with the IMX codec went green and Pink, audio is still ok.
in the import panel / Finder ecc. also in Bridge all clips look fine but when they are in Premiere the turn out pink&green.
i tryed to reimport all IMX based media new --
to set the media offline and reconect them new.
delet all reder - and Preview files.
im using OSX YOSEMITE
Premier Pro CC 8.1
XDCAM DRIVER are updated and working.
does anyone had this problem or know how to solve it???
thx #
Stephan
XDCAM HD 422 50i . mov Clips works fine.
XDCAM IMX Clips are all green and Pink.
in the import window, all clips are looking good.

HI!
I´m having same problem with quicktime files from newtek. When imported they are all green.
I tryed to import in other softwares and looks fine. Even in Premiere CS5 is OK with Maverick.
I think the problem is Yosemite with CC. Must have some issue with codec orsomething.
Many people are having problems since yosemite upgrade! Whats going on with codecs?

Pixelated Screen - shimmering green and pink

I posted this over in the display forum but im not getting much help over there. thought i would post here and get a bigger crowd.
anyways, on my ibook, the screen is very pixelated. it reminds me of when you put a video card in a pc and there are no drivers installed for it. there is a shimmering green and pink effect all over the screen. mostly in the shadows though.
i have already tried to adjust the resolution and colors. nothing changes the way it looks. current setting is at 1024x768 with millions of colors selected.
i took a screen shot and transferred it to my pc and opened it in Photoshop. The screen shot looks flawless and none of the above symptoms are there.
so is the LCD bad? maybe the inverter?

If you have the external video adapter, as included with the iBook when new, you could check the non-LCD
components to some extent by seeing if you can run an external display; and if the images view correctly,
the internal display has secondary issues that can be further troubleshooted by you or a tech.
There are some software utilities out there which may work to help use an external display; but I don't use
them and so can't recommend them. A few were not supported officially, but people used them in iBooks.

Videos Showing Green and Pink (Preview and Export)

I've imported a series of MTS videos. In the timeline - the color is fine. In the Source/Program monitors, they get a weird green and pink overlay. Any thoughts?

When I converted with Media Encoder to MP4, it still happened.
After reading all the posts, here's what I did: emptied the Media Cache in
PP, then downloaded PP '14
It went away, for whatever reason
On Tue, Jul 22, 2014 at 10:37 AM, JPellizzi <[email protected]>

We are experiencing a black screen with the Apple symbol and a flashing light. We have tried to reset, unplugged without success

We are experiencing a problem with our Apple TV, it shows a black screen with the Apple symbol and a flashing light. We have tried to reset it by unplugging and pressing the main button on the devise. Please help!

Try a restore.
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

When I plug in the VGA adapter the colors change to green and pink on the screen

When I plug in the VGA adapter to my new MacBook Air, even without connecting the other end to the lcd projector, the screen colors on the computer change to green and pink

As Stated above...
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
If no joy... Try here > DFU Mode

HT201210 Why are my ipad colors are all green and pink?

Why are my I pad2 colors all green and pink?

Because something is wrong.
To fix, try:
- A reset. Nothing is lost
Reset : Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings.
If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Image Manipulation is making green and pink thumbnails

Using the coldfusion 8 image manipulation we are getting thumbnails that the colors are all green and pink. This seems to only affect the thumbnails and not the larger resized images. See screenshot for example. Any ideas why this is happening or how to fix it?
The functions being used are ImageWrite and ImageScaleToFit.


<cfparam name="jpgQuality" default=".8" />
<cfparam name="defaultInterpolation" default="bicubic" />
<cfparam name="defaultBackground" default="black" />

<cfparam name="thumbMaxWidth" default="" /> 
<cfparam name="thumbMaxHeight" default="60" /> 
<cfparam name="thumbQuality" default="1" /> 
<cfparam name="thumbFixedSize" default="false" /> 
<cfparam name="thumbBackground" default="#defaultBackground#" /> 
<cfparam name="thumbInterpolation" default="#defaultInterpolation#" /> 
<cfparam name="normalMaxWidth" default="476" />
<cfparam name="normalMaxHeight" default="324" />
<cfparam name="normalQuality" default="#jpgQuality#" />
<cfparam name="normalFixedSize" default="true" />
<cfparam name="normalBackground" default="#defaultBackground#" />
<cfparam name="normalInterpolation" default="#defaultInterpolation#" />
<cfparam name="zoomMaxWidth" default="670" />
<cfparam name="zoomMaxHeight" default="380" />
<cfparam name="zoomQuality" default="#jpgQuality#" />
<cfparam name="zoomFixedSize" default="true" />
<cfparam name="zoomBackground" default="#defaultBackground#" />
<cfparam name="zoomInterpolation" default="#defaultInterpolation#" />

<cfparam name="originalFolder" default="path to folder for original images" />
<cfparam name="thumbFolder" default="path to folder for thumbnail images" />
<cfparam name="normalFolder" default="path to folder for large images" />
<cfparam name="zoomFolder" default="path to folder for large resized images" />
<cfparam name="watermarkImage" default="" />
<cfparam name="wmXPosition" default="50" /> 
<cfparam name="wmYPosition" default="65" />
<cffunction name="genWatermarkImage">
    <cfargument name="ImageFile" required="true" />
    <cfargument name="MaxWidth" required="true" />
    <cfargument name="MaxHeight" required="true" />
    <cfargument name="StorePath" required="true" />
    <cfargument name="FixedSize" required="true" type="Boolean" />
    <cfargument name="Background" required="true" />
    <cfargument name="Quality" required="true" />
    <cfargument name="Interpolation" required="true" />
    <cfargument name="AddWatermark" required="true" type="Boolean" />
    <cfif IsImageFile(originalFolder & ImageFile)>
        <cfset original = ImageNew(originalFolder & ImageFile) />
        <cfset originalHeight = ImageGetHeight(original) />
        <cfset originalWidth = ImageGetWidth(original) />
        <cfset outfile = StorePath & ImageFile />
        <cfset watermark = ImageNew(watermarkImage) />
        <cfset ImageScaleToFit(original,MaxWidth,MaxHeight,Interpolation) />
        <cfset new_w = ImageGetWidth(original) />
        <cfset new_h = ImageGetHeight(original) />
        <cfif FixedSize>
            <cfset normal = ImageNew("",MaxWidth,MaxHeight,"rgb",Background) />
            <cfset ImagePaste(normal,original,int((MaxWidth-new_w)/2),int((MaxHeight-new_h)/2)) />
            <cfif AddWatermark>
                <cfset ImagePaste(normal,watermark,( int(ImageGetWidth(normal)) - int(ImageGetWidth(watermark)) -3),( int(ImageGetHeight(normal)) - int(ImageGetHeight(watermark)) -3) )/>
            </cfif>
            <cfset ImageWrite(normal,outfile,Quality) />
        <cfelse>
            <cfif AddWatermark>
                <cfset ImagePaste(original,watermark,( int(ImageGetWidth(normal)) - int(ImageGetWidth(watermark)) -3), (int(ImageGetHeight(normal)) - int(ImageGetHeight(watermark)) -3) )/>
            </cfif>
            <cfset ImageWrite(original,outfile,Quality) />
        </cfif>
    <cfelse>
        <cfreturn "Image file not an image!" />
    </cfif>
</cffunction>
<cfset thumbError = genWatermarkImage(Filename ,thumbMaxWidth,thumbMaxHeight,thumbFolder,thumbFixedSize,thumbBackground,thumbQuality,thu mbInterpolation,"false") />

After Effects CC 2014 Crashing with Magic Bullet Looks on Mac

Hi,
I recently installed the upgrade to the latest After Effects CC 2014 v13.0 and found the Magic Bullet Looks now causes After Effects to crash. I'm using MBL v2.5.2
I opened the Activity Monitor and noticed that whenever the crash occurs the Adobe QT32 Server is in a state of (Not Responding)
On a clip I can apply the MBL plugin with no problems and even if I am copying a previously set up version from a previous clip, it applies and renders without trouble. I can click "Edit" on the plugin controls, open up the MBL control window and make all the adjustments I need without any trouble. The issue is when I then click either "Finished" or "Cancel" to go back to After Effects. The program freezes and I get the spinning wheel of death for about ten seconds and the the whole thing, MBL and AE shut down.
I am running:
MacBook Pro
OS 10.9.4
Processor 2.3 GHz Intel Core i72.3 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Cuda 6.0.54
The footage is Apple Quicktime ProRes HQ
I have Quicktime v10.3 installed and Quicktime Pro v7.6.6
I am at a loss as of how to fix or even work around this. Any help would be appreciated.
Thanks

There was a bug in MBL on Premiere CC 2014 that was causing crashing and lockups. Red Giant released an update quite quickly that so far seems to have fixed it for me. I know you're talking about AE but maybe there's some common code that was also fixed? As Rick says, have you checked the latest ver of MBL?

Adobe premiere pro cc 2014 freezing with magic bullet looks

Hi-
I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it. The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable. Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved. I've already done hours and hours of editing in 2014 only to keep having crashes.
Is anyone looking into this or has any recommendations so I can get work done.
Thanks!
-Lok

I don't use magic bullet Looks but is that a 3rd party plugin?
If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html

Anyone familiar with Magic Bullet software??

If so, I have a question. With all the new cameras that have features such as "cine-gamma" and more detailed control over color and image, is it necessary to even purchase/use something like MB anymore? I was interested in it at some point in the past, seeing as how the filters could help you achieve the elusive "film look." But, it seems these new cameras have that issue covered by processing it for a "film look" as they record, instead of you trying to fix it in post with MB.
Anyone had experience with MB and/or new cameras mentioned (Panasonic DVX100, for example)? I'd like to hear your thoughts. I'm beginning to look at new cameras; I've had my XL1 for nearly 6 years now, and although it's still a workhorse and still going, I'm liking what I'm seeing on the market.
Thanks,
Sean Kirkland

I have the Magic Bullet Movie Looks plugins. I also use a Sony HVRZ1U (which does NOT have true 24P) and tonight, as a matter of fact, I'm doing a shoot using a DVX100.
I'll say this: If you use the Magic Bullet plugins, prepare yourself for VERY LONG rendering times. Applying one of their plugins to even a small piece of footage almost quadruples rendering times. Unless you have a RAID 0 and lots of RAM or you're only doing a small piece...well, there it is.
The piece I'm doing tonight is, in fact, going to only be about 7 minutes total when finished, and I may actually apply some Magic Bullet to this piece when it's all finished. It's a promotion for a cigar company, and I think a certain look coupled with the the DVX100 may be pretty cool. In a way, your post is actually what got me thinking about this, so thanks!
I hope I've helped you in some way.
Gman

Render Problem with Magic Bullet Looks

Can't render effects from Magic Bullet Looks with Final Cut Pro. I receive this error message: 'The effects looks failed to render: your hardware cannot render at the requested size and depth.'
However, it renders fine with CS4.
The graphics card I have is the ATI RADEON HD 2600 XT. 256MB
All this is on the same computer.
Any suggestions?

Did anyone know?

Fcpx with magic bullet green and pink flash frames

Similar Messages

Maybe you are looking for