FCPX won't recognize projects/events on my External Hard Drive

I have all my projects and events for FCPX on my external hard drive because my MacBook Air does not have enough room for it. I've been working on my Air for a couple years and I just got a iMac. I thought it would be simple enough just to plug in my hard drive into my iMac and it would recognize everything, but sadly it isn't. I've looked everywhere and I couldn't find any fixed for it. I can just create new events from my old events but that would take alot of work. I thought there would be an easier way to be able to import all my old events/project and start working on them.
*Also when I create an event on my iMac external hard drive, it puts it will all my old events in the same folder, but still won't recognize them. Stumped
Thanks

You'll be updating to FCP X 10.1.1. It uses Libraries now, whole different thing.
http://www.macprovideo.com/hub/final-cut/fcp-x-101-upgrade-guide-to-libraries-pa rt-1
http://www.macprovideo.com/hub/final-cut/fcpx-moving-and-copying-events-and-proj ects
http://www.macprovideo.com/hub/final-cut/fcp-x-rules-of-the-consolidate-command

Similar Messages

My G4 won't recognize my WD My Book external hard drive.

I've spent an hour just trying to find out how to post a question in the right place. I hope someone out there can help me out. I can't seem to find my exact issue. I just purchased a Western Digital "My Book Essential Edition 2.0 1TB". I have a MacBook 2.33 GHz Intel Core 2 Duo running OSX 10.4.11 and a 1GHz Power PC G4 also running OSX 10.4.11. My laptop recognizes the external drive without incident, but the G4 will see it in the disk utility, but not in the finder or on the desktop. When I try to partition it or erase it as suggested in some of the discussions here,I get an "input/output error" error message. I have tried it in all of my usb ports which work for everything else. The tech support @ WD had no answers and I'm hoping someone hear can help me. Thank you so much!
Diva B. (after trying about a dozen names and they were all taken, this is what I wound up with, plz don't hold it against me :-))

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

I want to move imovie projects and events to an external hard drive. Where is the "move" command?

I want to move completed imovie projects and events to my external hard drive. I see in the "help" section that I should "move project & event" and they indicate that their should be such a selection. I highlight the project I want to move and attempt to drag it to my external HD but it won't stay. I never see "move project & event". I've tried holding the "command" key down while dragging and that doesn't work either. Help ...

Hi
Moving Event's and Project's
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W

I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am warned that I will not be able to use this video in existing projects How do I point iMovie to events in my external hard drive so I can pl

I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am woarned that I will not be able to use this video in existing projects
How do I point iMovie to events in my external hard drive so I can play projects which use them?
MacBook, iMovie 9.0.4

Hi
You can do this - by not doing it the way You describe as it will not work.
a. the external hard disk - MUST BE - Mac OS extended (hfs) formatted -
UNIX/DOS/FAT32/Mac OS Exchange - will work for most things - BUT NOT FOR VIDEO (iMovie, iDVD or FinalCut doesn't matter)
b. Do not alter or move any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - at all
All moving's of Events and Projects must be done within the iMovie Application - then connections will not break.
(move them back and see if iMovie remembers them - then do move as described above)
Yours Bengt W

I moved my FCP events and projects folder onto my external hard drive and now everything is gone on FCP. When I tried to reload those folders onto FCP nothing happened. I still get the missing files image.

I moved my FCP events and projects folder onto my external hard drive and now everything is gone on FCP. When I tried to reload those folders onto FCP nothing happened. I still get the missing files image. When I try to import the folders manually something pops up that says it is incompatable. It is possible to retrieve everything that was lost?

"When I tried to reload those folders onto FCP nothing happened"
Brownale6 how can u reload folder in to FCP.
As you said folders are moved to external disk but have you checked it should be like this
For Event
external disk>Final Cut Events>your event folder.
For project
external disk>Final Cut Projects>your project folder.

How can I copy projects and events to an external hard drive from iMovie 10?

I have created a project in iMovie 10, which I would now like to share with a colleague, in a form in which he can edit just like I can. I do not see a way to copt projects and events to an external hard drive, the way I could from previous versions of iMovie. Any suggestions?

You can copy an iMovie 10 library to an external volume (HD, Thumb drive etc.) with the Finder so as to share it with a colleague. You may find the following link helpful:
http://help.apple.com/imovie/mac/10.0/#mov3fa25bae7
Before copying the library you have to make sure that all media is in the library. Media from iTunes, iPhoto and similar are by default linked to my iMovie and not copied to the library. To resolve this you may need to consolidate media before you copy the library. See for details:
http://help.apple.com/imovie/mac/10.0/#mov882dee351
Note that your colleague has to be using the same version of iMovie. Even different minor updates may cause problems.
I hope this helps.
Geoff.

I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several project 'missing file' - but they were all there working fine before I updated.

I have just updated to Final Cut Pro 10.1.4 - I have updated Projects and Events on my external hard drives (off the File menu). It's says under several projects 'missing file' - but they were all there working fine before I updated. I am working off 2 external drives - not sure if that would make a difference.

After the update each seperate connected drive should now have a seperate Library.
The older Projects and Events folders would have to be at the top level of those drives go be seen and updated.
Were all the necessary Projects and Events in the corrrct place before updating?
Al

I downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

i downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

What version of iPhoto?
What format is the disk?

How do i transfer my iphoto events to an external hard drive and have the pictures remain within their original events?

How do i transfer my iphoto events to an external hard drive and have the pictures remain within their original events? Every time i try it splits up all of my pictures one by one. You'd think you'd be able to just drag and drop the event, but no such luck. Help!!

What version of iPhtoo do you have?
To export the photos in an event use the file menu == export command - see the user tip on exporting for the available options
TO use your iPhoto library on an external drive
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

How to move i photo events to an external hard drive

My Mac is nearly full so i need to move some old i photo events to an external hard drive, how do i do this?

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

How do I back up old "Events" to an external hard drive?

When I import new photos to iPhoto, I'm getting a message saying my iPhoto disk is almost full. I'd like to transfer some older "events" to an external hard drive and then simply delete those photos but I can't seem to figure out how to do that. HELP!

If you have less than 10 GB of free space on your boot drive you will have reduced performance and at damage your iPhoto library or your entire system
Drag your iPhoto library to an external hard drive that is formatted Mac OS extended (journaled) and test it. This will move your entire library to the external drive. Once it is fully tested you can delete photos from your main drive. In the future you may want to purchase iPhoto Library Manager to move future photos to the EHD. Also verify that your backup is backing up the rxternal drive as well as your main drive
LN

Create a dvd from past project and event moved to external hard drive

i have version 7.04 DVD. Moved several projects and events to external hard drive. How do I go to "existing dvd projects" and create a dvd from a completed past dvd project? do i have to move the project and event back to the iMac hard drive..thanks

A iDVD project contain links to the various elements you have used to make the project. Unless you have actually saved the project as an iDVD Project Archive (an option under FILE in iDVD) which can be a very large file because it actually contains all the elements used in the project with adjusted links, simply moving a project (and/or elements used in the project) breaks all the necessary links. Sometimes you can reestablish the links (iDVD usually gives you a chance to try), but it can't always be done.
Good luck.

Powerbook 15" w/ Tiger won't read Maxtor One Touch II External Hard Drive

Hi all:
For some reason my G4 Powerbook can't recognize my Maxtor One Touch II external hard drive. I am trying to find a firewire cable that fits, as the Maxtor just gave me a USB and says that the cable won't work with mac. I am trying to find a cable that has a "printer type" end and a firewire end. Will it help? Where do I find it?
Thanks,
Chris

No the printer type end, won't work in Mac OS X either. The software that is included with One Touch does not work well on Tiger or later. Instead I recommend not using that software, and instead using Shirt Pocket Superduper for backup. Or look for EMC/Dantz to update the drivers for the included software to Tiger. I think the One Touch does have a Firewire 6 pin connector which is Mac compatible. These ports look like the Firewire port on your G4 Powerbook. Port number 2 below is a Firewire port:
You can buy the cable from the Apple Store, or any major Mac mail order shop such as Macwarehouse, Maczone, Macconnection, or even CDW.

How do I transfer iMovie 11 EVENTS to an external hard drive so that I can delete them off my macbook pro to make space

How in the world do I transfer iMovie events from my event library into my external hard drive? There is no option for that. Even when I select "copy" an event, and then go to the external drive and want to paste it, there is no paste option.
The only time I can transfer footage from the laptop to the backup drive is if I drag and drop an imovie PROJECT file, and along with it click on "copy projects and events"
But most of my events are not projects, and I just want to move my event videos off the computer.
I feel like it shouldn't be this hard and frustrating to figure out.

See: http://help.apple.com/imovie/#move7d66613
Geoff.

Itunes won't find 'itunes music library' on external hard drive by default

I have my Itunes library saved on a wireless external hard drive. When I open itunes for the first time after a re-start it won't automatically detect the itunes music library file and I have to point it to the correct folder on the external hard drive. Once I do this everything works perfectly until I re-start my mac and then I have the same problem.
One of my friends has told me that macs won't automatically connect to wireless devices like windows does but he thinks there is some software that enables it to do so. I presume this would sort the issue out or alternatively any other suggestions are very welcome.
Thanks for any help

Your external HD needs to be mounted before launching iTunes or iTunes will create a new blank library on your startup drive.
You can add your external HD to the list of startup items in  > System Preferences > Accounts to avoid this problem.

FCPX won't recognize projects/events on my External Hard Drive

Similar Messages

Maybe you are looking for