FCPX wont export? Error message within

So I'm trying to export a video using FCPX version 10.0 and when I try to export it nothing happens at all. No window comes up, nothing, no response. When I try to upload to Youtube or export to Apple devices it says 'The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)'
What does that mean?
I'm using an iMac OSX 10.9.

10.0 will not run on Mavericks. You must update to 10.1..3. Why have you not updated for more than 3 years. You did buy from App Store, yes ?

Similar Messages

TS3694 My iphone 4 has died and says connect to itunes. itunes restore wont work, error message 2001, then 2006 appears. Tried all the troubleshooting help, but nothing works. Any ideas???

My iphone 4 has died and says connect to itunes. itunes restore wont work, error message 2001, then 2006 appears.Tried all the troubleshooting help, but nothing works. Any ideas???

I solved my own problem. Hopefully this will help someone else.
I did a DFU restore, then started it up as a new phone on iTunes. Everything loaded properly, then from iTunes did a restore from backup, selected the one I wanted and it still took me to the same screen with 3 options of restore. I chose the start up as new phone from the actual phone and after all the syncing was completed, my phone is back in working order.

I phone wont charge error message

My i phone 4 wont charge-error message -chrging is not supported with this device
but i am using an applle charger

Two biggest causes of this are crud/lint in your dock connector, causing a short, thus producing that error message. So, use canned air & a soft toothbrush to clean your dock connector. Also, look for any bent pins. If that doesn't fix things, try a different USB cable.

Adobe premiere pro 6 exporting Error Message: winFile.ccp-814]

adobe premiere pro 6 exporting Error Message: winFile.ccp-814]

I'm getting the same error when I try to export a video.
Below I've tried to follow the above provided list of info required for the forum.
I'm using the most current version of Premiere Pro from CC.
I installed all the updates last night before trying to export.
I'm running an updated version of Win8.
The source footage is mostly shot from my 550D/T2i(.mov), and then there are small overlays of an mp4 video I ripped from Youtube. I'm trying to export the video as MPEG2, at 1080i settings. Is this enough info?
[..\..\Src\Win\WinFile.cpp-814] that is the error message I'm getting
When the problem occurs Ijust hit"Okay", which takes me back to the export screen. I hit "export" again, and then it appears to be exporting, but the progress bar stays on 0%.no it hasn't worked before.
Other software? As in simultaneously? Just Chrome browser. Or in conjunction with Premiere Pro; then nothing. It's a standard export from PP without any plugins or standalones contributing to the export.
As stated above, no I have no third party stuff running.
Hardware
Processor: AMD II X6 1055T 2.8GHz
Memory: 16GB
GPU: ATI 5700 1GB
No, I'm not using Mercury Playback engine.
Only with final ouput. My previews are fine.
Hope that's enough info.
Cheers

FCPX 10.1 Error message: Argument invalid

When I launched FCPX with new upgrade this morning, my external hard drive with most every fcp project and event was on line. I was asked from launch to upgrade projects and events. I said ok. From then on, all I get is an error message, saying argument invalid. I click ok, and go into fcp anyway-- and initially none of the projects from my external (g-raid) drive would open. I took my hard drive to another computer that doesn't have the FCP X upgrade, and FCP could read none of the project or event files! It looks as if my work is lost. Because all my projects have been reformated to only be read by 10.1.
After 7 hours (no exaggeration), talking to four different Apple 'genius', I got no answer as to why this is happening. As the day progressed, all but two of the projects can now be opened and played. Unfortunately, the one I need the most does not. It looks as if the reason may be one of the referenced events ( a voice track) is no longer on my computer. i would like to go into the project, and delete that voice track, and see if that will allow my project to play. Unfortunately, can't open up the file. All I get when I try to open it, is the candy cane, trying to log in graphic. Until FCP finally gives up and quits.
Any suggestions? Apple tech guy's only suggestion is to get the back up copy of the project (thank God I have one), and work on it on my imac WITHOUT THE 10.1 UPGRADE! That's pretty much an admission of bugs in the upgrade. If I were out there and had important projects in the works. I'd wait to upgrade. Unfortunately, I was eager to fix the problems FCP X has with LIon.
Also, whenever I launch FCPx I get error message at the top, that argument is invalid. Fortunately I can just press ok, and continue on. But it's very disconcerting to start a work day with an error message.
A Anybody have similar situation? Anybody have any ideas about why my one project won't open, and how I can get in there so I can at least move the one clip that is nolonger on my computer so that perhaps the 10.1 can render it?
Thanks,

This is very similar to a problem I am having and I ALSO get this pop up
My system doesn't want to recognise events/projects stored on the INTERNAL hard drive. (Yet the pop up makes it sound like it understands that there are duplicate events/projects from my internal and external HDs)
I had copied over the event and project folders to an EXTERNAL hard drive and when I plug that in it will bring up the events/projects from that EXTERNAL Hard drive, but not the internal one.
This is VERY annoying.

Is it possible to circumvent error message within a function module?

Hello friends,
Is it possible to circumvent error message generation from within a function module? My program calls a FM (namely FKK_S_CADOCUMENT_WRITEOFF) to do some updates. However, in certain cases this FM throws error messages and terminates the whole process. I cannot control the aftermath because it never gets back to the calling program.It stops at the FM level and not at my program level.
In essence, what I would like to do is to let the FM do its thing, generate some kind of exception (but no error message), come back to the calling program, and then I can capture the status in my program and do what is necessary from then on.
Your help is greatly appreciated

Hi,
Do not use Excerption Tab.
Instead declare a variable or Structure at export parameter.
Which will return you error Description or Status of the FM.
For Example.
Goto Se37 ---> key in FM name of yours.
Go to Table tab
At Parameter Name Column key in RETURN, Type as LIKE and Associate type as BAPIRET2.
ThankS & regards,
ShreeMohan
Edited by: ShreeMohan Pugalia on Aug 10, 2009 12:31 PM

Itunes wont open(error message)

i get an error message when i click on itunes. It says encountered uknown error (-200) ive tried unistalling and installing itunes but I still get the message. Ive had this problem since i did a system restore on my pc. Any idea how I can fix this? I was thinking about unistalling my ipod then installing it again however i get the feeling that his wont help solve the problem

lannyghirly,
As I understand iTunes will not open after being upgraded or reinstalled?
If so, this article would be a good place to start in troubleshooting the issue:
http://docs.info.apple.com/article.html?artnum=302386
Hope this helps,
Nathan C.

Updated itunes wont download. error message

digiatl signature? trying to download latest version of itunes but wont finish. Get error message about digital signature. huh?

With that one, I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/

After Effects wont open error message

Hello.
My After effects wont open. I've read many forums and info that others have written about it not opening. Stuff about erasing fonts, deactivating fonts, then also, finding folders /Library/Application Support/Adobe/Common/Plug-ins/CS4/MediaCore---> which was empty and had nothing to erase or do anything with http://forums.creativecow.net/thread/2/973961 ...Still nothing.
this is the error.
Last log message was: <140735190438672> <EAMountPoints> <0> Error: mount point list is empty
My computer is a brand new mac book pro. Tip Top of the line. Not sure what other details i should give.
Thanks for any help you can offer.
UGH boooo
thanks
L

I saw that there were a series of questions i need to answer in order to get the right answers.
What exact version of After Effects? Include the minor version number (e.g., After Effects CS5.5 with the 10.5.1 update). Do not just say "After Effects with the latest updates"; give the specific version number.
12.2 - after effects CC - CS6
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
yes. i even uninstalled and reinstalled the newest...again.
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Mac OSX 10.9.1
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number of disk drives, and how any external drives are connected.
2.3 GHZ Intel Core i716GB 1600 MHZ DDR3Macintosh HDprocessor #: 1Zero external drives connected.I use my local connection with my desktop to share files. Model Name: MacBook Pro Model Identifier: MacBookPro11,3 Processor Name: Intel Core i7 Processor Speed: 2.3 GHz Number of Processors: 1 Total Number of Cores: 4 L2 Cache (per Core): 256 KB L3 Cache: 6 MB Memory: 16 GB
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)?
Graphics NVIDIA GeForce GT 750M 2048 MBInstalled CUDA
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
NO
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
If you are getting error message(s), what is the full text of the error message(s)?
Last log message was: <140735190438672> <EAMountPoints> <0> Error: mount point list is empty.Generating crash log, which may take a few minutes. although there is another window that says A LOT MORE!!
What were you doing when the problem occurred?
trying to open it.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time?
It has worked for about 4 or 5 days. It was even working when i was doing the same action prior to the last time it stopped working. I was uploading a file from my other computers file. Which i had done many times throughout the day. As i work on one computer and when i have to leave and bring my laptop with me i do so. Because i work on my computer all day long. Desktop or laptop.
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2".
10.3
What other software are you running?
iWork - Numbers
Do you have any third-party effects or codecs installed?
Yes. I've since deleted them but i'm not sure where else to find the files if they're still around. ?
Are you using OpenGL features in After Effects?
Not sure i know what that is?
Does the problem only happen with your final output, RAM preview, or both?
its just not opening
Are you using Render Multiple Frames Simultaneously multiprocessing?
if that is the Double line play button then yes.
Are you using the ray-traced 3D renderer?
Not sure what that is.
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help.
What is the exact sequence of steps that you are taking?
Thanks for any help you can give me:)
L

Export error message and render error message

Hi all,
I just finished a16 min. movie, lots of hours containing two slides shows and a bunch of short video clips, lots of effects, transitions with jpgs, pip's, animated gifs and you name it. It came out great! ON THE COMPUTER THAT IS!... I am running pe7 on a brand new hp elite 410y desktop - AMD Phenom II x6 six-core processor 1045T, 8 GB PC3-10600 DDR3 SDRAM, 3MB L2 cache + 6MB shared L3 cache memory, 1TB seriel ATA hard drive and ATI Radeon HD 5570 graphics with 1GB DDR3 dedicated memory. My operating system is windows 7 home premium edition 64 bit. I used jpg's from three different camera's, downloaded google images, as well as the animated gifs. I took some video from my Nikon coolpix L110 and converted all mov files to avi using the free Prism converter...I didn't think to just use premiere to export to DV AVI. I also took youtube video and converted them to avi. I kept getting adobe system memory low, proceed with caution, did a bunch of saves and got throught it. I tried to render and the error unknown compiling movie message kept coming up. Well, at that point I just broke down, so many hours and then having to show the actual finished product to my friends, the stars of this movie on my little 20" computer monitor and not my big screen tv sucked...so dissapointing but moving on.
I started to search the forums and read another thread that Steve Grisetti answered about changing all photos to no more than 1000x750 and then try to split up the movie and export in premiere to DV AVI. I only had a few photos like that, changed them and I still keep getting the same error message. I tried just taking the first minute, did a save as, named it test and tried to export, no luck. There seems to be something in the first part that premiere does not like and I did notice on playback that some of my effects were not working i.e. video pip sliding in from the left of the screen over a jpg. I am so frustrated.
I finally chopped it up to three parts and tried exporting the 2nd part of just the video clips to DV AVI, no problem but changed my look. When I hit export movie and look at the settings summary Filetype is CompilerMPEGproxy, the Video settings are Compressor: I-Frame only MPEG Frame size 1440h 1080v (1.333) Frame Rate: 29.97 frames/second Pixel Aspect Ration: HD Anamorphic 1080 (1.333) Fields: Upper field first, Audio Settings are Compressor: uncompressed Sample rates: 48000 sample/second Channels: Stereo and Sample Rates: 16 bit. If I change to DV AVI, then the whole look changes, probably because the frame size is only 720h 480v. Is there a way to export to DV AVI and keep the larger frame size?
I wanted to keep the original size, so I just tried to render part 2 and part 3 as is and had no problem, but now the audio skips. I have a wav file on part 3 and part 2 has the converted avi audio that came with the clips. Please help, any suggestions will be most appreciated. I can't start all over...I'm burnt.
debby

Hi Steve,
Thank you for your promptness...I am still a little confused though, I made a copy of my final movie and was working off the copy to try all these different scenerios to get it to render and now have alot of different projects, same movie, different project names. Should I delete all the copies and take my original and go to Edit/Preferences/Media Cache and clear the media cache. Then the timeline menu and delete render files and then go to the FAQ's to troubleshoot.
A quick second question: I did get to render two parts of the whole movie, but the audio is skipping. Can that be fixed and can I use it?
Thank you,
debby

Unable to Export Error Message

I get the following error message when trying to export a file from LR 4.1 using Windows 7:
Unable to Export:
An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute
Has anyone else had a similar problem?

Yes, many people, especially when first using Export in LR4. The problem is likely caused by the Post-Processing/After Export: field being incorrectly left blank (by LR, not by the user). Simply put a valid action in that box, e.g. "Do Nothing" is fine, and the problem should go away.

IMovie 08 Export Error Message

I am trying to export from iMovie 08 without any success. I repeatedly get the same error message, but cannot find any reference to the error number anywhere. The error code is -2000. Here is the process that gets me there.
Import video from Canon Vixia HF m31 AVCHD camcorder to iMovie 08. Video was shot as PF30 (wrapped in 60i in-camera). Imported as "FULL". Trimmed a few seconds from the beginning and end. Share to "Export using Quicktime". Settings in Quicktime:
Compression: h.264
Frame Rate: Current
Key Frame: 24
Frame Reordering: YES
Compressor Quality: High
Encoding: Best (Multi-Pass)
Data Rate: Automatic
Size: 1280x720HD
Prepare for Internet Streaming: Fast Start
Am I doing anything wrong with any of these settings? The movie does start to encode, but about 1/2 way thru I get the error message. Does anyone have any idea what that error code means?
My export destination is Internet streaming, preferably at 720p for nice full-screen viewing.
Other tools I already have: iMovie HD, JES Deinterlacer, MPEG Streamclip, Quicktime 7.6.6
Thanks in advance for any help you can offer.
Message was edited by: acfpt

Ok, I came back to document the solution in case anyone else ever has the problem.
After 2 hours on the phone with Apple, it was determined that my Home>Movies folder was corrupted. Prior to that, we deleted preferences, caches, tried encoding the movie under a separate account on the same computer (worked fine there!), and a bunch of other things. It finally worked after we shut down iMovie, renamed the Home>Movies folder to Movies.old, reopened iMovie which created a new Movies folder, re-imported the footage, created a new project, and then exported.
Hope that helps someone else.
Thanks for the response, Appleman.

Exporting Error Message (-12348)

Hi, does anyone knows what is the problem with the export function?
I keep getting this:
The share operation "Master File" has failed.
The operation could not be completed because an error occurred while exporting (error -12348).
Can anyone tell me the problem? I tried googling for the error code but nothing pops up..

As in "Nothing has worked."
I click the "share" button, click "master file (default)", the normal screen comes up where you can review the settings, I click next, it lets me choose where I want to export the file to, I choose desktop, I click save, and a second later I get a "shared failed" at the top right of my screen.
When I click "details" I got the same message as Ken
The share operation "Master File" has failed.
The operation could not be completed because an error occurred while exporting (error -12348).

4.4 update for LR4 creates export error message

I just downloaded the 4.4 update for LR4. When I went to export my photos, I got the error message: Unable to Export! An internal error has occurred: Export WIN 32 API Error 2 (The system cannot find the specified file). Can anyone help me out with this?

In the Post-Processing > After Export pop-up at the bottom of the Export dialog, select something. It doesn't like being blank.

IMOVIE - can not export, error message

I can not export or finalize my project. It keeps giving me an error message everytime I try to do it. PLEASE HELP!!
Ive done other projects in the past with no problem. I just cant get this one to work

I can not export or finalize my project. It keeps giving me an error message everytime I try to do it. PLEASE HELP!!
Ive done other projects in the past with no problem. I just cant get this one to work

EDL export error message

I've run into this issue before and inquired, but received no real answer, so I'm asking again to see if anyone out there might be able to help me out. When exporting an EDL, I often run into the following error message:
"Unable to export the key track due to an error. Click OK to export other tracks."
When I go back through and double check the numbers, they seem to be correct. The only 'unusual' thing is that it often creates a second EDL, referred to as +(filename) B+.
Has anyone seen this or run into this issue? I would like to figure it out to make sure it's not missing something, or that I'm not doing something right. Any help is appreciated!
Thanks!
Amber

Thanks for the response, Michael. The information you provided explains a lot.
Here's what I'm doing: I'm archiving projects, usually :15, :30 or :60 in duration. I am exporting an EDL, Batch List and using the Media Mgr. to skin it down to the bare necessities. I get all the information possibly needed in the event that the spot is needed down the road to be used on a different system or simply as backup in case of missing pieces and parts. The timeline does contain audio and graphic files, which you explained will cause errors. My guess is that I'm getting this error message for the reasons you explained.
Does this information help?

FCPX wont export? Error message within

Similar Messages

Maybe you are looking for