FCPX XML not exporting audio with project...

FCPX XML not exporting audio with any project.
I have tried with several different projects to no avail.
Any thoughts or suggestions?
Thanks

I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

Similar Messages

CS4 not exporting audio with video

For a while now I've been working on a video for my class, mish-mashing together a bunch of smaller .avi files into a cohesive whole. Everything inside of Premier works perfectly. I edited the audio tracks with Soundbooth, so now they are .wav. When I export the video, first I tried MPEG4 and messed around with a lot of settings. After this didn't work, I searched around and discovered that Premiere occasionally doesn't like it when you change the pre-set settings, so I switched to H.264 High Quality and exported with that. Same deal: the video works fine, no audio. And yes, I made sure to check the box that says "audio and video" and not just video.
In short: How do I get Premiere CS4 to export my audio and video when I tell it to?

I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

Premiere not exporting audio files with the footage

Hello All, has anyone had trouble lately with Premiere not exporting audio files with the footage?

1st, show your export screen so people may see what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
2nd, when you ask a question you need to provide more information for anyone to try and help
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Exporting audio with a patch?

I have been using Logic Pro X to record some musical tracks in my studio. The sound quality of the program is phenomenal. I haven't ever had the idea to switch programs, it's just this one thing that gets me. So my question is, How do you export one of the audio tracks you lay down WITH the patch you added to it? I have put patches on the tracks before and tried exporting the track as an audio file, but it does not export it with the patch I put on it in Logic Pro X (it only exports the audio that was recorded originally). Please Help! I have struggled with this one area for so long, I have even gotten "I Don't Know" from Apple support members, given that this is a very complex program with all of the possibilities, i understand that they don't. Therefore, I am asking you guys. Thank you so much!
I am using Logic Pro X 10.1.1
iMac with OS X Yosemite 10.10.2

Use the word "Bounce" as a search term.
http://help.apple.com/logicpro/mac/10/

Export audio with timecode

Hi all!
How van i export audio with timecode from FCP?
Can you guys help me?
Thank you!
HBars

Thank you all for the msgs!
In audio post-production a .BWF files is used (broadcast wave file), with all the "audio information" timecode is used to sync with an external video...
To do this kind of export i would need an extrenal hardware to record it... i was trybg to know if you guys have another way os doing it.
I can sync by 1khz, 3/5/10 seconds from start... but with tc ... it would rock on!
Thank you all...
Tips are welcome!
HBars

I can not record audio with the internal microphone or a external microphone? What is the fix?

I can not record audio with the internal microphone or a external microphone? What is the fix?

jw000.w wrote:
I do appologize and appreciate it! Im and running OS X
Please click on the following link & do the necessary in providing the info previously requested.
http://support.apple.com/kb/HT1758 How to identify iMac models
Click on the Apple>About This Computer. The window will tell you which version OS is currently installed on your iMac.
=========================
It would help us to know which computer model you have, which OS you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.This will help in providing you with the proper and/or correct solutions.
Thank You.

Bounce or Export Audio with Send-EFX

Hi,
can somebody tell me, if there is a time-saving solution to export audio with the sends, automation and inserts? Of course I can bounce a solo-track step by step, but if you have to do it with 100 Songs...
Tanks for every note

Use the Bounce button on the Stereo Out. Exports audio with sends, automation and inserts. The whole shebang.
100 songs ? That's ten albums right there. Are you related to Frank Zappa ?
Christian

FCPX is only exporting audio not audio and video

Finished shared file (QT) is audio with a black video although settings in share are audio and video. Video is 90 minutes long, Have tried both H.264 and source - Apple ProRes 422

There has been a similar situation in a recent thread, where it was found that sometimes FCP X 10.0.8 did not honor the export settings regarding video/audio, video only or audio only and it kept using the previous setting unless something else also changed.
Apparently one workaround is to make some other changes to the project, or to change the export format (say to h264 and then back, if you were exporting Prores, or viceversa), and try again.

Premiere Pro CS5 not exporting audio

Hi all,
I've already searched Google and these forums extensively but can't seem to solve this problem even with all the solutions I've seen. I've never had any trouble in the past with exporting and/or audio, but the project I'm working on won't export properly.
I'm exporting a ~4 minute video with a mix of camera (Canon 60D) audio, audio from my Rode mic, and an mp3 as background music. The audio plays fine in the timeline, but I can't seem to get the export settings right. I've tried H.264, Vimeo HD, and exporting JUST the audio to no avail. The audio is AAC, which I've tried 48 and 44.1 kHz.
The video exports perfectly in 1920 x 1080 but has absolutely no audio.
Can anyone help me with this? The render time is super long on my old Macbook so I've just been exporting sections at a time.
Thanks! Let me know if I should provide any additional information.
Edit: I've also tried exporting through Media Encoder CS5; same result.

Hi, I'm having pretty much the same problem but after trying several of these solutions i'm still stuck,
I've completed a 30 minute film using 3 different types of digital cameras.
When i try to export it my system crashes and i have to open it again.
the project file is 35GB and i have over 100GB space on my external usb hard drive, so i know there is enough space, i also deleted temp files and unused files too.
I contacted an experienced film maker and took my hard drive to him so he could export it on his system and that also crashed, but he was able to export the entire video of the sequence but unticking the export audio, so i have a 30 minute film with no sound and i've put it down to an audio issue.
I had the same problem when trying to export the film when it was just 20 minutes long, i then cleared the media cache and deleted a lot of unwanted files etc, and then i was able to export the film. now it's 10 minutes longer and the issue seems impossible to solve.
the only solution i can think of is to delete the last 10 minutes of audio (which isn't really an option) or somehow record the audio into a seperate file and import it into the project
I'm not entirely sure of the exact details you would need from me but if there is any please ask
Using windows 7
4.00GB of RAM
Dual processor
Thanks for reading!
James

Exporting Audio with Quicktime Movie - Error 29562

There was a prior post about this that the OP marked as 'Answered' but it really wasn't for myself and a few others, so I'm posting a new topic. Sorry if that's inappropriate.
Using Logic 8.0, I've scored a section for a film and want to bounce that scene for client approval. I have the scene set with cycle region and I go to Options>Movie>Export Audio to Movie... I'm leaving the settings at their default states, and Logic runs through the process of bouncing the file, but at the end I get "Unknown System Error. Result Code=29562"
I've searched around and can't figure out what's going on. This worked fine for me on the last project I did in Logic 7 a month ago, but for some reason not working in Logic 8. Haven't applied the latest Logic update as some folks were complaining about it and I'd already started this project. Anyone know if it's addressed there?
Otherwise, thanks for any help!

Just installed Logic 8.0.1 and the problem has disappeared! That's the only thing I've tried since the update, so I'm assuming it's fixed anyway. Now to see if anything else goes screwy....

Final Cut Pro X will not export Audio

Everything looks / works fine on the timeline. However, when exporting there is no audio. When trying to export audio only, I receive Quicktime Error 0. This just started happening in the last couple days. I've had it since it came out and haven't changed anything in the settings, etc. I'm clueless. I have a project that took me a couple days to put together. I've had to capture the audio using iShowU and then sync it up in Premier Pro - not a good workflow at all. Anyone have any suggestions?

Well - I was slightly wrong. I was zooming in on the timeline to do some screen captures and there actually was a cross disolve I couldn't see when zoomed out to the full timeline. So, I'd heard people having issues where dissolves are so I removed it. Sure enough everything plays (and exports) fine. However, I go to re-add the disolve and the sound again shuts off right at that point on export. Any solutions to that problem?

QuickTime 7.4 - not loading audio with MPEG2 video any more?

Unfortenatly this update broke the ability to load MPEG2 video track together with .wav or .aif audio - e.g. when you click on .m2v /MPEG2 Video track/ and if you have the .wav audio with the same name in same folder as video, QT 7.4 wont open audio, only video...Which is a dissaster for many apps including mine - MPEG2 Works 4...Exporting MPEG movies and VIDEO_TS folder to other QuickTime formats working only partialy now - without audio, video only..Now I have to figure it out what a **** is goin on again...I hope Apple made a mistake and not did this intentionally...

See: http://docs.info.apple.com/article.html?artnum=300832 Mac OS X: No audio from certain multimedia content
Trick/Tip: Open up GarageBand if installed then, open a program (optional).
Quit out of the GarageBand app.

Exporting audio with markers button is greyed out.... ANY HELP MUCH APPRECIATED!

Hello
so, background to the story. Now peak pro is defunkt on OSX I am trying to use Audition to create cdmasters. The idea being I will compile the album in audition, export wav files of each track including gaps and compile DDPi master in Sonoris DDP creator. Should be fine but quite a few limitations I've found already in audition.
1)Main question is this. Exporting tracks. I have compiled and added all the markers in to a 30+ track cd. I've exported whole thing to a single mixdown that includes marker but the 'EXPORT AUDIO OF SELECTED RANGE MARKERS TO SEPERATE FILES IS GREYED OUT' even if i select everything....
2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
2) & 3) are very annoying when you only want to move one clip by a few frames or seconds.
Any ideas folks ? Like i say uestion 1 is most pressing!
Thanks in advance

thanks guys, all makes sense, really appreciate it.
I will try the merging out. I was in a hurry to get a CDREF out so ended up just exporting the compiled album out as one wav from audition and adding PQ points in Sonoris. Not ideal especially as running order etc is bound to change.
I can't recomened Sonoris DDP creator enough, fantastic program and very reasnably priced. I have Soundblade LE as well but find it too clunky to bother learning, its one of the least intuitive audio programs I've ever come across.
Maybe Audition and Sonoris should team up, if you could add PQ points into audition it could become the best OSX option for compiling cd masters.
Did you have any thoughts on questions 2)&3)
2)In multitrack mode, if you want to move one clip in the middle of the sequence, is there any way to select all the clips in all the following clips so that they all slip back together. I know you can zoom out and select everything but that is very boring especially when you have loads of tracks and if some are only a couple of second long soundbytes. In SAdie and Peak Pro it was very easy to set this function.
3)Moving markers. if I am moving a number of tracks is there a way of selecting and moving the relevant markers as well ? At the moment it seems like I'd have to select all clips in the boring zoom out method and then move each marker individually? Surely not...
Thanks
Dan

LR not exporting images with proper presets

how come I can edit an image and then save it by exporting it with preset it looks way different when I reopen the file. and I am not talking little changes I mean crops through peoples faces and super contrasty. it there a better way to save the images to be burned on to a disk later? i just upgraded hoping it would stop this problem. guess what????

My guesses would be that either:
1 - You are Exporting your images in LR without using the sRGB profile and you should be, or
2 - You have a wide-gamut monitor and are viewing sRGB images in a non-color-managed application or at least one like IE that doesn’t respect a non-sRGB monitor profile.

Crash 0::42 when Exporting Audio with Quicktime:

Hello Folks,
We're having an issue with exporting .mov files from After Effects. When a user tries rendering a project through Make Movie > Ouput Module > Quicktime Movie, AE crashes with the error code 0::42 if the user simply clicks the 'Format Options' button for Audio output. In addition, if the user selects File > Export > Quicktime Movie, the movie will get about half way done and crash with the same error.
This error occurs on all of our workstations. We are using CS4 and HP workstations of various makes and models, the only direct similarity is they all use Realtek built in audio. I have done some troubleshooting using procmon.exe and the issue that seems to be coming up points to a conflict with our audio driver and Quicktime (see the following regesty entries below)
The following kept coming up with a BUFFER OVERFLOW and NAME NOT FOUND results:
HKLM\System\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\HDAUDIO\FUNC_01&VEN_10EC&DEV_0262&SUBSYS_103C 130A&REV_1002\4&705ED8E&0&0001\DirectSound\Device Presence
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Drivers32
Also, both registry entries point to the file
C:\Program Files\Adobe\Adobe After Effects CS4\Support Files\(Media Core plug-ins)\Common\AsioWdm.dll
Does AsioWdm.dll have some conflict with our HD Realtek audio and quicktime?
I tried uninstalling and reinstalling the Sound card drivers / codecs. This actually allowed me to export Quicktime movies without crashing via File > Export. However, we're still experiencing the crash when clicking on 'Format Options' from Make Movie > Output Module > Format Options.
Does anyone have any idea what's causing / how to resolve our issue?
Any help would be much appreciated.
Thanks,
Ben

Hello again,
Thank you for your responses, here is an update on our status:
I am testing a simple scene with a .wav file. AE only crashes when we're using the Quicktime module and if we click on Format Options in the audio settings. All other modules seem to work just fine. Interestingly, if we choose File > Export > Quicktime Movie, we can access the audio compression options and AE does not crash.
In regards to ASIO, as far as I know, we are not interfacing with anything else. The workstations we're using have built-in speakers, but I don't see how that could be an issue and nothing else is plugged in.
As for the codecs, we have the k-lite package installed as well as DivX, Xvid and whatever comes with the Realtek drivers. I tried uninstalling k-lite and xvid, but neither seemed to help.
Other things I have tried:
- Uninstalled and reinstalled AE
- Updated Quicktime to the newest version
- Uninstalled and reinstalled Quicktime to version 7.65
- Disabled openGL support
NOTE: we recently tried this on one of our workstations (z600) with windows 7 64 bit and we got the same issue.
No matter what we do, AE still crashes when we have the Quicktime format selected and click the Format Options Button for the audio settings.
Any other ideas?

FCPX XML not exporting audio with project...

Similar Messages

Maybe you are looking for