FCS 2 Audio Content Disc 1

I recently purchased FCS 2 used on ebay.
Audio Content Disc 1 came as a white Apple replacement disc.
when I tried to install said "disk error"
when I open the disk in Finder, there is an alias icon.
show original says it can't be found.
Anyone out there know where I can find a replacement disk or dmg?
Thanks

Yup, pretty much the same, though I can't guarantee it byte for byte.
The huge folder post installation is called "Apple Loops for Soundtrack Pro" and it's 22GB. Yup, you read that right: 22GB. That is one major folder, full of loops, sound effects, foley etc. Massive and, if you don't want it, check the following thread for how to get rid of it.
http://discussions.apple.com/thread.jspa?threadID=1252383
One thing that might have made a difference is that there is a new lossless compression format (CAF files) and the Logic Studio uses that format. Final Cut Studio didn't have that at its release and it's likely that the Soundtrack Pro audio DVDs have not been remastered to use the new file format, hence the disks being all but identical.
Pete
BTW: in case others are inclined to pick holes, CAF is not strictly a format, it's a container or wrapper and can hold Apple lossless format, AIF, text data and all sorts of other goodies. So there

Similar Messages

  • Normal to have "Final Cut Studio - Audio Content 1" disc in package?

    Hello All,
    I am trying to install a newly purchased Logic Studio 9 and the installation is not going well; it is asking me for an "Additional Content" disc...but I don't have such a disk in the box...I do have a Final Cut Studio Audio Content 1 disk though...is this some kind of mistake and it shipped with the wrong disks?

    scotopia wrote:
    Hello All,
    I am trying to install a newly purchased Logic Studio 9 and the installation is not going well; it is asking me for an "Additional Content" disc...but I don't have such a disk in the box...I do have a Final Cut Studio Audio Content 1 disk though...is this some kind of mistake and it shipped with the wrong disks?
    Additional Content and FCS Audio Content are not the same
    If the copy of Logic Studio you bought shipped with a wrong disc you need to return it for a replacement.
    A

  • Can't install Audio content

    I am unable to install the audio content for Soundtrack on FCS2 . During the process the installer will ask for Audio content disc 1 ,I insert the disk and then after a few seconds the installer asks for the Final Cut Studio install disk . I insert that and get the message that there was an error with the installation and to try again . All the other apps for FCS2 install fine . The only issue is installing the Audio content disks. Apple sent me a replacement Audio content disk and I had the same issue . I even tried installing directly from the Audio content disk as opposed to going through the FCS2 installer . This time it seemed to install disc 1 but gave me the error message when I installed disc 2 . Any ideas ?I have been talking to Apple but there is no resolution yet . They told me to make a disc image of the replacement disc and try to install from that using a different user account . I'm waiting for the disc image to be created .

    Has anyone found a solution for this? I am also having the same problem with installing the audio content. Any help would be greatly appreciated. Thanks!

  • Audio content of FC studio and Logic Studio

    Hi does anyone know if the 3 Audio content discs included with logic Studio are the same ones that are in FC studio? thanks

    Yes, they are the same.

  • Audio Content/Jam Packs

    i purchased Logic Pro 8 but i have recently moved house and managed to lose the discs except the installating disc
    luckily, i had the serial written on the disc case, but when i install it asks me for the Audio Content and Jam Pack discs which i dont have
    is there a way to download/get sent these discs?
    thanks

    no its not stolen lol
    i was contacted today by the removal company that that moved my stuff, and there was another box found containing the original logic box along with my camera - i wondered where that was lol
    thanks alot for the help anyway!
    Message was edited by: MITCHFIELDER

  • Jam pack & audio content

    I run a mac pro and logic in my studio, both up to date. I tossed my office PC into the trash. I'm now officially done with PC'S. Went with the IMAC.
    Processor Name: Intel Core 2 Duo
    Processor Speed: 3.06 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 4 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: IM101.00CC.B00
    SMC Version (system): 1.53f13
    My question is. Can I load The Jam pack & audio content from my logic 9 update discs into the new IMAC to use in garage band just to fiddle around. While I have nothing to do in my office!! This would be great. Thanks Bill

    cowbell bill wrote:
    My question is. Can I load The Jam pack & audio content from my logic 9 update discs into the new IMAC to use in garage band just to fiddle around.
    Personally I did not tried yet with Logic contents disks but you can try using the shareware Pacifist app, which must do what you want.
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!

  • A black airplay info window floats around on my HDTV screen when sending audio content via airplay up to sound system w Apple TV.  How can I get rid of this?

    A black airplay info window floats around on my HDTV screen when sending audio content via airplay up to sound system w Apple TV.  How can I get rid of this?

    Had this happen to me after a recent update, was super annoying.  To turn off, go to Settings > AirPlay > Conference Room Display > Off.

  • Why can't I import audio content from a Pana LX5 MTS file?

    Hi,
    Awesome as the new video capability is in CS6 (the ability to add image filters is to die for!), I have encountered a problem.
    I can import the video component from a Panasonic LX5 .MTS AVCHD Lite video file. But the audio isn't included and I can't bring the audio content into an audio track by importing separately.
    When I import H264 .MOV, taken with my Canon 7D, audio is included in the video import and I can also import audio from another, similar file to an audio track.
    Is there some special trick involved with AVCHD Lite format video? Has anyone else succeeded in importing audio from an .MTS file?
    Kind regards,
    Joachim Smith
    Nykoping
    Sweden

    You aren't the only person: also fails for me, Windows 7 64-bit. Audio doesn't play in CS6 Bridge either, although audio plays in Windows Media, so I assume system has correct codec installed.
    I think this might be a bug, here is a .mts file for others (or Adobe) to test with: http://www.newae.com/00012.MTS

  • Can Romanian Companies open a iTunes store and sell audio content  ?

    Hello dear friends,
    I own a Romanian Company that produces audio content.
    I wanted to know if Romanian Companies are allowed to create stores and sell their content online on iTunes.
    Before posting this post, I tried to find the answer to this question, searching on Google and apple site, but without success.
    If anyone can help me with some links regarding my problem, please post them as a reply or contact me directly on email admin @ cartiaudio.eu
    Thank you very much, and sorry if I disturb.
    Best regards,
    Valentin

    At this time there is no iTunes Store in Romania, so there is no place for Romanian companies to sell music tracks, movies or videos within your country. Apple has not said anything as of yet as to any plans or possibility to open an iTunes Store in Romania, so until such time as Apple is able to open an iTunes Store in your country the answer is, I'm sorry to say, "no", not if you wish to sell within Romania.
    If you are interested in releasing your content in other countries where there are iTunes Stores, though, contact Apple via their web page for iTunes Marketing. You'll probably want to read their FAQ first.
    Regards.
    Message was edited by: Dave Sawyer

  • Can't install audio content any idea?

    Hi
    I don't understand this. I installed first audio content in final cut but it is asking put second cd. I did that. But there is only one way to get through is can't eject cd 1 . is i drag n drop this. cd 1 is out but when i put cd 2 in it is canceled automatically. I have to do all over again. Any idea what should i do to install 3 cd's?
    Thanks in advance

    See RedTruck's reply here:
    http://discussions.apple.com/thread.jspa?threadID=1710283

  • Burning  audio content  cd from a dvd ??

    Hello, Does anyone know if it's possible to take the audio content from a DVD and burn it as for eg. an MP3 or something that could be listened to on a cd player? I have some presentations that are video recorded and want to copy the audio as such.
    Thanks
    Message was edited by: omshanti

    Hi
    There is no tool to do this directly as standard on Your Mac.
    I guess that programs like WireTap could do part of it.
    I would either:
    • connect recorder eg my miniDV tape Camera and do an analog copy
    then import this into iMovie HD 6 and from here export out as QuickTime
    expert-mode and as an audio .aiff file.
    This can be imported into iTunes and from here to an audio-CD or as .mp3
    • or use Roxio Toast™ to back convert the DVD to streamingDV then to iMovie
    and as above.
    Yours Bengt W

  • Importing/converting DVD-Audio/Dual Discs

    Hello, this is my first post.
    I just got the 30 GB Video Ipod today.
    I am not having any luck with iTunes importing and converting my dvd-audio/dual discs.
    The CD side gets recognized by iTunes but sounds VERY scratchy when it is converted to a format to put on my ipod. Strangely, it also sounds scratchy when I play it on windows media player or any other software player. It also goes silent for a bit sometimes. But it plays fine outside of my computer (e.g. my car) and it isnt scratched.
    I flipped it over to the DVD side and iTunes doesn't recognize it so I can't import and convert it. The DVD side sounds fine though when I play the audio on my computer or on an outside player (e.g. my car).
    Is there anything I can do?

    Have a look at this thread:
    http://discussions.apple.com/message.jspa?messageID=1967367&tstart=0

  • How can I add the audio content cd after logic finished installing ?

    There was an eror installing the Audio Content CD 1 and I did not notice. Everything else installed properly, Audio Content CD 2, Jam Pack, but how can I add the Audio Content CD1 after Logic has finished installing?
    If you can help me please be very specific as to how to do it so that I can follow the directions properly.
    Please help me.
    Thanks

    Hi
    You could re-run the installer, or, once you have updated to Logic 9.1.8 you could use the "Download Additional Content" function in the Logic Pro menu. It will tell you what is installed and what is incomplete.
    CCT

  • LPX won't update audio content?

    Whenever I start LPX, I get the "Resume content download?" dialog from previously attempting to download new audio content.
    I hit "Resume," and I get an optimistic "Downloading Additional Content..." progress bar.
    I give it my credentials once it's finished, then every single time without fail, it shows me this:
    Except my internet connection is absolutely fine. I have a great router and very high speeds. This has happened literally every single time, both on Mountain Lion 10.8.5 and Mavericks of every version. I don't know at all what the problem is. Anyone have insight?

    It means your permissions are not allowing Logic X to copy the files over to the Application Settings folder when completed.
    You need to set the permissions for the following to read and write for all:
    /Library/Application Support/Gargeband
    /Library/Application Support/Logic Pro
    /Library/Audio/
    You can set them back to normal by typing chmod -R 775 then drag and dropping the folders individually into terminal after you run Logic X and it completes the download one last time.
    (That is to say: type chmod -R 775, drag one folder, then type chmod -R 775 and drag the next)

  • IWeb not uploading audio content

    Hi folks
    I've a problem with audio content on my iWeb site. I've created it as a podcast in iWeb and before I upload seem to work fine, including playing the mp3 files I've dropped into it. But when I upload it to .mac the audio content does not seem to appear and I can't figure any way to play it. Hmm, am I doing something stupid?
    Thanks for your patience.
    David
    iMac G5   Mac OS X (10.4.9)  

    My father was having the same problem, then I realized, when I looked at my website, I too was having the same problem. I'm guessing there was a glitch in the last update that needs to be resolved. Call Apple .Mac support or regular support. They need to be made aware of the problem by as many people as possible so they can know this is happening for many of us. The problem is that iWeb is (for some reaons or another) changing the extention of the audio poscast from .mp4 to .mov. Because of the scripts that are running, and the conficint extentions, the podcasts don't work. If, however, you view the RSS feed of your podcast, the audio should load just fine. This is weird. Apple, please help!!!

Maybe you are looking for

  • How do you connect a microphone to a Mac?

    How do you connect a microphone to the Mac?  I'm trying to record vocals onto Garage Band.  I tried to use an adapter (XLR to MONO 3.5 mm) to connect directly to the port on the side of the MacBook Pro.

  • Publishing EJBs takes more time in Oracle Weblogic 10.3 workshop

    Hi, We recently migrated from Weblogic 9.2 to Oracle Weblogic 10.3 workshop. I have a ejb project which has more than 30 ejb's(both entity and session ejbs). The problem is: whenever I modify the code inside a method and save, it builds the project a

  • Editing PSD file in Lightroom?

    I'm creating a PSD file for a client so she can edit the text in the document herself. I thought I read somewhere that PSD files can be edited in LR. I've never used LR, but just downloaded it to take a test drive, but can't figure out how to edit th

  • Paramenter Value Case Sensitive Setting

    Is there a setting in the pref.txt file (or any place else) to change the actions of the case sensitive setting for entering parameter values? Turning it off/on. Changing the case sensitive setting in the condition that contains the parameter does no

  • How to get pernr from Recruitment module(PB000),

    Hi All, I want to read the pernr from the applicant data PBnnnn, There is one GET PERNR, for PAnnnn, which reads pernrs from Employee data. Is there any similar way for applicant data also?