FCS 2 upgrade- do you need the original prog to be installed?

I'm just about to take delivery of a brand spanking new Mac Pro, 3.2GHz etc (and very excited I am).
Planning to install FCS2 as an upgrade from my existing copy of FCP3. Will the FCS2 upgrade package require that FCP3 is installed on the machine already, or does the upgrade package simply require the licence number from the version that I'm upgrading from?

You don't need the older version installed ... just enter the serial number from the older version when prompted.
To expound on what Dvaid Lsater said, if you upgraded from FCP 3, it would not be legal to sell that version after upgrading from it.
-DH

Similar Messages

Do you need the original Twitter App to get Twitter notifications in your notifications center?

Just upgraded but I have not used the original twitter application in a while, I found a better one (Tweetlist). Do I need to have the original app on the phone in order to get the Twitter notifications in Notifications Center or will the notifications come through anyway as I have already integrated my account into the phone settings itself?

Yes, of course you need rights, for any content you wish to use - photos, artwork, music, text, everything - unless you created said content yourself. If you can't afford the rights to the photos you want to use, don't use them. Find photos, as Dave suggested, in the public domain or with a Creative Commons license that allows your use , or different photos with a lower licensing fee, or take your own photos. Note that if you take photos of people, you'll need model release forms from every person whose photo you wish to use.
For further details, consult an attorney.

If music is in iCloud do you need the original music to restore a device

If all my music is in iCloud can I still use it if I don't have any of that music on my hard drive anymore?

Yes, you could lisening to it via iTunes without having the files on your Mac and also for restoring a device, but only if bought the music via iTunes and if you have an iTunes Match account (for tracks you didn't buy via iTunes).

Do you need the original chord to sync your ipod

i can't seem to sync my ipod to my itunes

The iPod, iPhone and iPad all use the same chord, for the older models. So a chord for any of those will work. If no chord works are you able to charge your iPod?

If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes?

I have two questions...
1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
2) Has anyone ever seen anything like this before on their computers?
The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!

You don't lose them. You can always redownload them from the app store after you log back in with your Apple ID.
"Buy, download, and even redownload.
You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own."

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Where to begin... and why would you ask here? (workstation owners)
Places I can think to try, after google of course....
Forum devoted to something like Word / Mactopia or Pages.... whether you are using Office 2011, and no idea what browser or webmail (IMAP, Gmail, other)
And then there really are notebook with subforum for MacBook Pro
Apple Site Map
Apple Support Mail
Apple Support

Satellite L30-10T: I need the original number of the inverter

I bought a second hand Toshiba Satellite L30 10T without an inverter.
I need the original number of the inverter .
Ho can help me.
Dik

Hi
I dont know the original part number of the FL inverter but the part can be ordered from Toshiba ASP in your country!
Here you can find all ASPs worldwide.
http://eu.computers.toshiba-europe.com/innovation/generic/SUPPORT_PORTAL/
I recommend calling the guys and to order the part.

Mac Safari message: To view this content, you need the latest version of the Flash Player. Adobe TV

How do i get past this message?
To view this content, you need the latest version of the Flash Player. Adobe TV uses the Open Source Media Framework (OSMF) to deliver a superior video experience. Please upgrade your Flash Player to version 10.2 to benefit from this technology.
I am running Mac OS X 10.10.3 with the latest Safari version 8.0.5.
I have uninstalled and removed cache and reinstalled the Flash Player 17 many times, but still get this message when i try to view a video in Adobe TV.
I have version 17 of Flash player installed but the Adobe TV is asking me to upgrade to v10.2.

Try using a different browser and/or be sure to install and enable the Flash Player plugins for your browser.
Safari
https://helpx.adobe.com/flash-player/kb/enabling-flash-player-safari.html
Chrome
Adobe Flash Player plug-in - Chrome Help
Firefox
Install the Flash plugin to view videos, animations and games | Firefox Help
Nancy O.

I bought a second hand ipod 5 and the original owner forgot the email and password and i can't restore the ipod and it says i need the original apple ID but i dont know it could anyone help me??

i bought a second hand ipod 5 and the original owner forgot the email and password and i can't restore the ipod and it says i need the original apple ID but i dont know it could anyone help me??

If you can access the device: Tap Settings -> General -> Reset -> Erase All Content and Settings.
If you can't do that then you need to Restore it as New:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
You can also try using DFU mode:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How to repair disc on second partition iMac 27? 10.6.8, but second is still 10.6.3. Can I use the original 10.6.3 install disc to start, and then go to the side needing repair?

Partitioned iMac 27, Sept. 2010. Verify disc on HD2 says "corrupted, needs repair," unspecified. "Use install disc to repair." HD2 is isolated from Internet since birth. HD 10.6.8, but HD2 is still 10.6.3. Can I use the original 10.6.3 install disc to start, and then go to the side needing repair, without a problem?
Part 2: After 4 years, suddenly when HD2 is revived from sleep, it makes an Internet connection, all settings are the same, Network shows Ethernet is unplugged, but the indicator from modem shows connection. Maybe connected to first part of my question, but maybe not.
Thank you.

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

HT204150 I have synced an iPhone 4S with iCloud - I now have a 5C to replace it. What happens to my data when I retire the 4S - does it need the original device to save my data?

I have synced an iPhone 4S with iCloud - I now have a 5C to replace it. What happens to my data when I retire the 4S - does it need the original device to save my data?

Welcome to the Apple community.
Once you have restored your new phone from the backup of your old phone and ensured that everything is working correctly, you should first turn off "find my phone" on the old phone and then erase it, before you get rid of it.

HT4061 I have an Iphone 4, which I tried to download the new IOS 7 update on, but it says, on screen, connect to Itunes! I have tried but it says i need the original cd?? Help???

Hi can anyone help? I have an Iphone 4 which I tried to download ios7 to, but it says on screen, connect to itunes, which I have tried, but it says I need the original cd? I dont recall receiving one, so does this mean the phone has to be reset, if so how?
Thanks in advance, Tracy.

Do you have the latest version of iTunes installed on your computer as you will need it? It can be downloaded from the Apple site via the iTunes menu at the top of the screen.
It sounds like your phone is in Recovery Mode, more on this here: http://support.apple.com/kb/HT1808
Regards,
Steve

"You need the Rosetta software to run -bash" ????

I've finally upgraded my old PB to the latest MBP. I have used the Terminal to run Ruby, RVM and Rails, etc.
I've used the Migration assistance when starting this new machine.
But Terminal kicks me out with this: "You need the Rosetta software to run -bash" I don't want to run Rosetta and I would think bash isn't PowerPC software.
I've googled this but don't see this mentioned anywhere. With Terminal out of commission, I'm unsure what file to open that will give me a clue as to my setup. thanx, sam

/bin/bash on a default MacBook Pro Mac OS X installation is:
file /bin/bash
/bin/bash: Mach-O fat file with 2 architectures
meaning it has both intel and PowerPC code.
So I would wonder if you are invoking /bin/bash, or if you have somehow pulled your PowerPC bash copy over during the migration of your stuff from your PowerBook.
My Mac OS X 10.6.6 /bin/bash chksum is
cksum /bin/bash
3855549735 1346544 /bin/bash
You might also want to check your Terminal preferences, as there are ways to override the default shell invocation that might have been migrated over from your PowerBook.
You might also look at what your default shell is set to (should be /bin/bash)
dscl .
cd Users
read yourunix_namehere
quit
Or as one line
dscl . -read $HOME shell
Message was edited by: BobHarris

How can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have

how can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have .... help me

Moh'd . Hassan wrote:
how can i format an iphone with an differant apple id ?... the phone is locked and it needs the original apple id to activate it which i dont have .... help me
Then get the previous owner to remove it: Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support

How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!

Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

FCS 2 upgrade- do you need the original prog to be installed?

Similar Messages

Maybe you are looking for