FCS and FCPX trial

Ok this is not one of those can i have both on the machine questions......at least not the traditional question.
I have successfully installed FCPX on a machine that has FCS 3 on it a mac pro
My question is, if i want to put the FCPX trial on my MBP do I have to do the same thing or will it just be installed in a separate location and I can continue to use both with no issues until the trial runs out?
I may be asking too much but figured I would ask before installing and end up wigging out my machine.
Also it is a 2.2ghz 8gb ram running 10.8.3 so ya know

1. No. Apple says that ideally it should be on a separate drive or partition, but they also give details for installing it on the same.
I and many others have done this with no problems.
2. No problems leaving everything where it is.
3. FCP X has some of the capabilities of those apps, but as they will do no harm and only take up 4GB (just the apps), you may as well keep them  .  .  .  .  unless you know you will never need them again.
The moment you delete them you will suddenly discover a job that requires one of them!

Similar Messages

  • Failed to download FCPX Trial Version.

    I was trying to download FCPX Trial Version from Apple Downloads and failed.
    After pressing: "Download" - a message appeared: "Failed" + warning: "
    "The following disk images couldn't be opened
    Image: FinalCut Trial 7/0/3
    reason: not recognized".
    My internet connections are ok - I downloaded other things + apps and there were no problems.
    My system requirements are ok.
    My Imac 24":
    OS10.6.8
    Memory: 4GB:
    Intel Core 2 Duo
    4GB of RAM
    Graphic card: NVidia Geforce 8800GS .
    What's wrong?

    Have you tried this link?
    http://appldnld.apple.com/Final_Cut_Pro_X/041-4030.20120410.FWDLp/FinalCutTrial1 0.0.4.dmg

  • Fcpx trial can't read my card EX3

    I download the fcpx trial, i try to read a EX3 card and doesn't work... and to try to resolve this problem when I look to download content format I didn't can find them????
    Do you have any sugestion to resolve it... thank you very much

    If you're talking about the native BPAV files, you need Sony software (like XDCAM Browser) to convert to XDCAM .mov before importing to FCP X.
    Andy

  • Switching from the FCPX Trial Version to the full version.

    I started a project in the FCPX trial version. The trial version ran out before I was finished. I have downloaded the full version, but apparently I was supposed to do it by starting the trail version.  Now when I try to open that project the trail version tries to open and doesn't know I have purchased a full version already already. What should I do? Is there a way of opening the full version and moving my project over?

    namedug wrote:
    I have downloaded the full version, but apparently I was supposed to do it by starting the trail version. 
    I don't know what that means. If you have down;loaded and installed the paid version, double-click to launch FCP. If the trial version ic opening when you launch the paid cerise, that is very weird, If so, I'd say move the trial to the trash.
    Russ

  • Best Practices for sharing media with iMovie and FCPX

    So I've a large iMovie Events directory, and would like to use that media with both iMovie and FCPX projects.
    I'd rather not duplicate the media, so would prefer to import as references into FCPX.
    The dilemma is that I see that it's possible to modify or move media from within the iMovie application, and therefore break the reference to that media with FCPX.
    I only see two options:  (1) Never Ever modify the location/name of media in the iMovie Events file (even from within the iMovie app) since I would break an FCPX link if that media is referenced, or (2) always import (copy) the iMovie events into the FCPX Event Library making an independent original so that I can confidently operate on those media files in either application.
    I'd surely rather not have to do (2 )(e.g. doubling my storage demands) to gain the flexibility of using either application to edit the video, but really don't want to live with the restrictions of (1).
    Thoughts / Solutions?  What might you consider as options or best practices?

    Unless there is some other reason, users should own the right to share their mailboxes - it shouldn't be something that demands administrator management (if only so that the administrators aren't swamped by user requests for sharing their mailboxes). 
    For true shared mailboxes, when the mailbox is created, full access is granted by an administrator.

  • I am trying to download the Adobe Photoshop CS6 Extended Student and Teacher Trial

    I am trying to download the Adobe Photoshop CS6 Extended Student and Teacher Trial and it had me download te assistant. After downloading the assistant, I installed it and I signed in. It wants me to pick a product to download and the Adobe Photoshop CS6 Extended Student and Teacher is not listed. The closest thing to download is Adobe PS CS6. Please help me

    there is no specific trial for S&T. It's just the normal program. S&T is a licensing/ pricing thing, not some technical difference.
    Mylenium

  • Trouble opening the free photoshop and illustrator trial downloads, please help!

    Trouble opening the free photoshop and illustrator trial downloads, please help!

    Dear Michael,
    In response to your questions, please see below;
    What OS? OS X 10.8.2
    What happens? When i click on the ''AdobePatchInstaller'' i get this message, ''Update Failed, Updates could not be applied. This patch is not applicable for you. Please check for updates from the Help menu in your product to see a list of latest updates available. If the problem persists, contact customer support for further assistance.
    Any error messages? No
    Did you have previous versions of the software on your system? No
    Is the trouble with the download or the installation of the software? I am not sure but i think it may be the download. It shows that the download was complete and icon appears on the desktop.                                                                                I plan to buy the ''Adobe Creative Suite 6 Design & Web Premium'' but i wanted to try it first via the free trials, especially Photoshop and Illustrator. So please let me know what i need to do.
    Kind regards,
    Nancy Gonda-Nesbeth
    Freelance Garment Technologist
    <Removed by Moderator>

  • Corrupt ? : Java and ABAP Trial Version on Linux - VMware Edition

    Has anyone been successfull in downloading / running the brand new testdrive "Netweaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition" ?
    I tried downloading it twice, but it appears the second file (part2.rar) is corrupt.
    unpacking gives a CRC error on file 'SLES10SP1_Test_Drive(2)-s003.vmdk.
    Thanks & Best regards,
    Jeroen Engelen
    SAP Netweaver Technology consultant

    Hello all,
    You have to follow instruction on this side>
    http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
    YOu need to download
    part1 > which is soft from NOvell called
    SAP Test Drive "SLES10SP1VSAP.rar"
    Maybe this link help you "http://download.novell.com/index.jsp?product_id=&search=Search&families=2658&version=8161&date_range=&keywords=&sort_by=&x=14&y=7
    After donwload from sdn part two
    SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
    from sdn Downloads.
    YOu need to use VMWARE soft to start up SLES 10 (part1) and after that use SLES to start up SAP.
    But here I have problem I can not login to SLES as I don't know passwrod, I was trying to found it at novell web site or SAP without any sucess.
    So at this point I am stuck
    Here is the same qeustion from Jim Jiang  and me
    what is user name  and password for SLES10 SP1 SAP Version
    Hope this give you overview what needs to be done, to start up Trial SAP version
    Peter Nechala

  • I have installed creative cloud and a trial version of illustrator on my laptop since then my IT department has purchase illustrator but is having problems installing it onto a PC workstation.

    I have installed creative cloud and a trial version of illustrator on my laptop since then my IT department has purchase illustrator but is having problems installing it onto a PC workstation.

    Hi, the problem is that my IT department was sent a link  on his laptop to install Illustrator, however the request was for them to build me a workstation and install it on there. they have built the workstation and is having problem installing the CC desktop app on there, just to clarify would you be able to answer the following:
    1) Do you have to have CC desktop app to install Illustrator from the given link?
    2) If you have signed up & installed  CC on your laptop, can you install illustrator on a workstation by simply installing the CC desktop app on the workstation, log into that with your username & activate the link to install illustrator, basically the provided link should not be specific to a computer or user?
    Thanks

  • Latest FCS and 20" 2.4ghz iMAC...

    running 2gig of RAM with the ATI Radeon HD2400T (128MB card), with an external FW800 RAID -- project footage shot with HVX200 P2 -- 720/24P Native... Anyone running this type of configuration, cutting this format? Will it RUN on the new iMAC?
    I'm looking to use the FCP and Motion applications only.
    I'm assuming once I purchase the FCS and OS upgrade for our 17" MBP, I can load the upgraded FCS onto the iMAC (provided its not on any other Mac)
    David Healy
    Message was edited by: David Healy
    Message was edited by: David Healy

    David Healy wrote:
    running 2gig of RAM with the ATI Radeon HD2400T (128MB card), with an external FW800 RAID -- project footage shot with HVX200 P2 -- 720/24P Native... Anyone running this type of configuration, cutting this format? Will it RUN on the new iMAC?
    Sure it will. I would look to max out the RAM though. I am runninga 17" MBP with about the same specs using very similar footage and it does very well.
    I'm looking to use the FCP and Motion applications only.
    FCP will run fine, you may find Motion a little sluggish with that video card.
    I'm assuming once I purchase the FCS and OS upgrade for our 17" MBP, I can load the upgraded FCS onto the iMAC (provided its not on any other Mac)
    Per the EULA you may have FCS installed on one desktop and one notebook as long as they are not being used at the same time and that they are owned by the same person.
    K

  • General workflow between FCS and FCP question....

    Hey all.
    I'm totally new to FCS, and while in a few hours I've figured out a lot about how it works, what is totally eluding me is how to establish an efficient work flow back and forth between FCS and FCP...it's really driving me crazy.
    Yeah, I know, read the manual...but nothing I'm finding anywhere seems to be a really direct, straight-up description of how to get a FCP project up and running.
    Specifically I am dealing with the whole "checking out" a project thing, creating proxies, etc., it just feels very awkward. The test project I'm working with has 1 (ONE!) clip (granted a 28GB HD clip)...but FCS is not allowing me to make a proxy into the cache, this is after I already took that clip into FCP, cut it, saved it, checked it back into FCS just to make sure I got the basics of flowing back and forth down.
    I wish I could be more specific, but I really really really just want a basic explanation of how to use the FCS as, you know, a server.
    Anyone who can point me in that direction is a GOD!
    thanks,
    Mark

    Hi Mark,
    Here are the specific sections of the manual that should give you the best explanation regarding the Check out/in workflow for FCP projects in Final Cut Server:
    Check out:
    http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =5
    Editing:
    http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =6
    Check in:
    http://documentation.apple.com/en/finalcutserver/usermanual/#chapter=7%26section =7
    -Daniel

  • I have imovie 10.0.4 and FCPX 10.1.2

    I have imovie 10.0.4 and FCPX 10.1.2 and I cannot get iMovie project sent to FCPX.  I see a very brief progress bar, but then nothing and no transfer to FCPX.
    Any thoughts?
    Thanks
    David

    Any iTunes music in it? Some iMovie content just does not transfer. You really need a basic project to transfer.

  • SAP NetWeaver7.0-Java and ABAP trial version on linux. login problem

    Hi all.
    The following programs SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition installation.
    Written by Mr. Gregor installation at https: / / SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition - Tips & Tricks
    Note.
    As I write programs that install the setup screen appeared normal. But username: root, password: sap123 is wrong. Ejected.
    What is the problem?
    Pls reply..
    Best regard.

    oh~ dear  it's noncense  $-(
    found it.
    username:root password:root
    have a nice day.

  • I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-instal

    I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-install a previous version b/c I need both a product Id (GOd only knows where that is now) and a way to uninstall the trial. Any ideas?

    When you installed the trial, there should have been an option to have ignored your current installation and leave it. Apparently you skipped that case. To uninstall the trial (in Windows) go to Control Panel>Programs & Features and select the Acrobat XI and choose uninstall. After the uninstall run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up your system. HOWEVER, if you see your old Acrobat in that window, do not run the cleaner, but do a repair on the old version.
    You did not mention the old version you had. You might try from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. As for the S/N, you should have register and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.
    Be sure to backup any download of the old installer and the S/N to CD or backup HD for future use. They will not likely continue to be available.

  • I have to unistall my adobe cs5 [s/n removed by moderator], and a trial for Photoshop cc and I cannot find the download for those. Can you help me?

    I have to unistall my adobe cs5 serial number [], and a trial for Photoshop cc and I cannot find the download for those. Can you help me?

    CS5 product downloads are available thru the following page:
    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    Photoshop CC trial download is available thru its product page:
    Download Photoshop CC by joining Creative Cloud today | Adobe Photoshop CC

Maybe you are looking for

  • Free Item in Purchase Order Item

    Hello All, I would like to ask where in table level can I identify Purchase Orders which have "Free Item".  Because on the screen field i saw from the technical definition that the "Free Item" is of field MEPO1211-UMSON, but when I go to EKPO I canno

  • Disabling the button in a form

    Hi, May i know how to disabling the button in a form based on value of item in same itself. For eg: In a form an Select list item called 'Flag' which holds the values like Y and N. If Flag is N means the Button called 'Check' will be disable otherwis

  • Batch input - FB05 - How to fill LIFNR if I post on GL account.

    Hi, our company normaly use IDOCs (FIDCCP02) for posting FI documents (accrual intercompany FI documents) and there we can fill LIFNR and it is saved in BSEG-LIFNR. But now I  created batch input for transactin FB05 and I cannot fill LIFNR anywhere o

  • Insert date on a condition

    I would like to insert the current date and time if a condition is met. 'Now' and 'Today' upadate to whatever is current. I want something that will put in the date and time at the moment, and leave that. Is there a way to do this?

  • Layer (Hide / Unhide) Dashboard Objects

    I have a dashboard with three main categories. Instead of making the user scroll up and down to view each category object I want them stacked and layered on top of each other. I have command buttons at the top of the dashboard that allow the user to