FCS for animation pre-production
I'm searching for an asset management solution for our animation production. The assets in this case will primarily be designs and storyboards. None of which would be used directly in a FCP project. This would all be part of pre production.
As the artwork moves through the pipeline, having one central location for everyone to work from would be great. Someone recommended FCS and though it looks great I'm wondering if this will work for us.
Thanks.
Final Cut Server would be a great solution for this needs regardless if you plan to use the digital assets in FCP or not. Final Cut Server can be installed both Windows and Mac OS X. I am assuming that at some point you may use After Effects to produce an animatic and Final Cut Server can be use for this as well. Also if you have a lot of image sequences Final Cut Server 1.5 has native support for image sequences which will also automatically create preview version of the image sequence.
Hope this helps.
Nicholas Stokes
XPlatform Consulting
Similar Messages
-
Pre-Production Setup for Failover
Hi
I have installed my SAP Production environment on Window 2008 R2 , SAP ECC 6.0 EHP5, Oracle 11.2.0.3.
I have setup my DR system at different seismatic zone on Window 2008 R2 , SAP ECC 6.0 EHP5, Oracle 11.2.0.3.
The Oracle Dataguard is used for data replication from Production to SAP DR system.
Now I want to test the failover scenario. I would like to go and install the separate SAP environment in primary site as Pre-Production for DR Test on different hardware box. The system identification (SID) for production and pre-production is same as RP9.
Would like to know that Can I use the same root domain controller (RDC) available at primary site for production and pre-production environment. The domain users are same for both SAP systems.
Please clarify that does this situation will create any problem to my production or pre-production environment with same root domain controller?
or
should I go head with different root domain controller for pre-production environment ?
Regards
vimalHello
It is not recommended to have SAP systems sharing the same SID in a landscape... at least because it is not possible to have the system in the same TMS transport domain (but this can also have other drawback, especially if both system have client with same logical system name).
Even if it is possible to use the same domain users for two different systems I would not recommend this option, especially if one of the systems is a production one...
Suppose that for any reason the SAP domains accounts gets locked / modified / deleted ...
Either you create pre-prod system with a different SID (best option) and then you can share the same windows domain, or if you are willing to keep the same SID I would suggest that you install your pre-prod system either in an other domain or in a workgroup...
If your purpose is to test your Oracle DR abilities that is not a domain related mechanism, so you can test it in a workgroup...
Regards -
Setting Office 2013 on Windows 8x in Pre-Production Mode
Hello
We are in the process of evaluating ADRMS for protecting documents. Currently, I have ADRMS running on a Windows Server 2012 x64. I have 2 other machines which talk to this - one with Office 2013 installed on a windows 8.1 set in production mode and another
similar machine having a custom program based on ADRMS SDK 2.1 APIs.
How can I set the server running ADRMS as well as Office 2013 in pre-production mode? If there are any documents on this, can this be shared or pointed to please
Thanks
SNHello,
Does anyone know how to do this or is this done differently?
This is what I want to test to start with - I have a document (docx) and I have protected it using ADRMS SDK2.1 based custom client application. I want to test this protected document by opening using Office 2013 and see if the permissions I set are working.
The custom application is installed on a machine (8.1, set to pre-prod by setting MSIPC & uDRM \Hierarchy to 1) connecting to a server (Win 2012, set in pre-prod by setting DRMS\Hierarchy to 1) with both ADRMS & ADDS installed in it. For some
reason the client works even with uDRM/Hierarchy set to 0, so not sure what is the relevance of uDRM.
I have the Office 2013 installed on a Windows 8.1 different from the above 2 machines and connected to the above domain. But I am unable to open the document protected by the custom RMS app. In fact, when I try to protect a document created using Word 2013
on this machine it says "The system cannot find the file specified"
00000001 0.00000000
[23512] /-----------------------------------------------------------------------
00000002 0.00000000
[23512] Public API called: IpcFreeMemory
00000003 0.00000000
[23512] pb: 0000005F3D432070
00000004 3.09854221
[23512] /-----------------------------------------------------------------------
00000005 3.09854221
[23512] Public API called: IpcpBootstrapUser
00000006 3.09854221
[23512] pConnectionInfo: NULL
00000007 3.09854221
[23512] pUser: PCIPC_USER
00000008 3.09854221
[23512] -->dwType: 1
00000009 3.09854221
[23512] -->wszID: [email protected]
00000010 3.09854221
[23512] pToken: PCIPCP_TOKEN
00000011 3.09854221
[23512] -->dwType: 2
00000012 3.09854221
[23512] -->pcvTokenData: NULL
00000013 3.09854221
[23512] -->cbTokenData: 0x00000000
00000014 3.09854221
[23512] pContext: PCIPC_PROMPT_CTX
00000015 3.09854221
[23512] -->cbSize: 40
00000016 3.09854221
[23512] -->hwndParent: NULL
00000017 3.09854221
[23512] -->dwFlags: 0x00000000
00000018 3.09854221
[23512] -->hCancelEvent: 0000000000000558
00000019 3.09854221
[23512] -->pcCredential:
00000020 3.09854221
[23512] NULL
00000021 3.09854221
[23512] pvReserved: NULL
00000022 3.09866428
[23512] [msipc]:Disabled SSPI auth for RMSO
00000023 3.09868693
[23512] [msipc]:IpcTokenCache::GetCachedToken Creating a new IIpcToken
00000024 3.09872818
[23512] [msipc]:+LoggedOnUserToken Created
00000025 3.09875011
[23512] [msipp]:+ippGetUser
00000026 3.09876585
[23512] [msipp]:+ippGetUserForUserInfo
00000027 3.09879208
[23512] [msipp]:+IPPUserIdentity::InitializeIdentityForUserInfo entered
00000028 3.09882998
[23512] [msipp]:+IPPLicenseStore::GetMachineCert
00000029 3.09911990
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(2222)
00000030 3.09911990
[23512] HRESULT = 0x8004f00d
00000031 3.09914303
[23512] [msipc]:+ippActivateMachine
00000032 3.09933877
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(708)
00000033 3.09933877
[23512] HRESULT = 0x8004f00d
00000034 3.09944534
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(763)
00000035 3.09944534
[23512] HRESULT = 0x8004f00d
00000036 3.09955812
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(708)
00000037 3.09955812
[23512] HRESULT = 0x8004f00d
00000038 3.09959126
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(763)
00000039 3.09959126
[23512] HRESULT = 0x8004f00d
00000040 3.09977841
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(708)
00000041 3.09977841
[23512] HRESULT = 0x8004f00d
00000042 3.09981275
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(763)
00000043 3.09981275
[23512] HRESULT = 0x8004f00d
00000044 3.09994483
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(708)
00000045 3.09994483
[23512] HRESULT = 0x8004f00d
00000046 3.09997869
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(763)
00000047 3.09997869
[23512] HRESULT = 0x8004f00d
00000048 3.10005188
[23512] Exception at d:\bt\2274\private\client\source\port\windows\ipcossecuritygeneral.cpp(90): hr = CDRMtoSP::CreateMachineCerts()
00000049 3.10005188
[23512] HRESULT = 0x80070002
00000050 3.10007334
[23512] [msipc]:Error encountered while activating the machine, hr = 0x80070002
00000051 3.10011625
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\core\ippmsdrmwrapper.cpp(650)
00000052 3.10011625
[23512] HRESULT = 0x80070002
00000053 3.10017371
[23512] [msipp]:-ippGetUser HR=80070002
00000054 3.10020924
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\framework\win7\win7ippuser.cpp(92): ippGetUser(IPP_GU_CONNECTION_INFO, pConnectionInfo, dwFlags, ipcContext, m_pUser)
00000055 3.10020924
[23512] HRESULT = 0x80070002
00000056 3.10022879
[23512] Error HRESULT 0x80070002 mapped to 0x80070002
00000057 3.10026145
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\api\ippapi.cpp(2525): IppGetUser( IPP_GU_CONNECTION_INFO, &pUserFromConnInfo, pUserFromConnInfo.wszID ? dwFlags : (dwFlags | IPP_GU_NEW), pIpcContext, &hUser)
00000058 3.10026145
[23512] HRESULT = 0x80070002
00000059 3.10028005
[23512] Error HRESULT 0x80070002 mapped to 0x80070002
00000060 3.10030127
[23512] Public API IpcpBootstrapUser exited with return code 0x80070002
00000061 3.10030127
[23512] \-----------------------------------------------------------------------
00000062 3.10036349
[23512] /-----------------------------------------------------------------------
00000063 3.10036349
[23512] Public API called: IpcGetTemplateIssuerList
00000064 3.10036349
[23512] pConnectionInfo: NULL
00000065 3.10036349
[23512] dwFlags: 0x00000000
00000066 3.10036349
[23512] pContext: PCIPC_PROMPT_CTX
00000067 3.10036349
[23512] -->cbSize: 40
00000068 3.10036349
[23512] -->hwndParent: NULL
00000069 3.10036349
[23512] -->dwFlags: 0x00000003
00000070 3.10036349
[23512] -->hCancelEvent: 0000000000000558
00000071 3.10036349
[23512] -->pcCredential:
00000072 3.10036349
[23512] NULL
00000073 3.10036349
[23512] pvReserved: NULL
00000074 3.10039186
[23512] [msipp]:+ippGetUser
00000075 3.10040927
[23512] [msipp]:+ippGetUserForUserInfo
00000076 3.10043311
[23512] [msipp]:+IPPUserIdentity::InitializeIdentityForUserInfo entered
00000077 3.10046244
[23512] [msipp]:+IPPLicenseStore::GetMachineCert
00000078 3.10075140
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(2222)
00000079 3.10075140
[23512] HRESULT = 0x8004f00d
00000080 3.10077405
[23512] [msipc]:+ippActivateMachine
00000081 3.10079026
[23512] [msipc]:ippActivateMachine Skipping Machine activation because of Offline mode
00000082 3.10082817
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\core\ippmsdrmwrapper.cpp(621)
00000083 3.10082817
[23512] HRESULT = 0x8004020d
00000084 3.10084748
[23512] [msipp]:-ippGetUser HR=8004020d
00000085 3.10087729
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\framework\win7\win7ippuser.cpp(92): ippGetUser(IPP_GU_CONNECTION_INFO, pConnectionInfo, dwFlags, ipcContext, m_pUser)
00000086 3.10087729
[23512] HRESULT = 0x8004020d
00000087 3.10089636
[23512] Error HRESULT 0x8004020d mapped to 0x8004020d
00000088 3.10091305
[23512] [msipc]:+IpcGetTemplateIssuerList IppGetUser Failed hr = 0x8004020d
00000089 3.10093284
[23512] [msipp]:+IPPLicenseStore::GetCLCWithRAC
00000090 3.10112619
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\msdrm\clientsdk\store\drmstore.cpp(2222)
00000091 3.10112619
[23512] HRESULT = 0x8004f00d
00000092 3.10114932
[23512] [msdrm]:-CDRMStore::GetLicense type=3 hr=8004f00d
00000093 3.10118246
[23512] Exception at d:\bt\2274\private\client\source\adrms\native\protection\core\ipplicensestore.cpp(399): m_cdrmStore->GetLicense( DRM_LICENSE_TYPE_CLC, pwszSearchPattern, uSearchPatternCount, fDefaultForUser, puCount, prgwszLicense, prgwszRACs)
00000094 3.10118246
[23512] HRESULT = 0x8004f00d
00000095 3.10121131
[23512] Public API IpcGetTemplateIssuerList exited with return code 0x8004020D
00000096 3.10121131
[23512] \-----------------------------------------------------------------------
00000097 3.10124445
[23512] /-----------------------------------------------------------------------
00000098 3.10124445
[23512] Public API called: IpcFreeMemory
00000099 3.10124445
[23512] pb: 0000005F3F8B0DB0
00000100 3.10132265
[23512] /-----------------------------------------------------------------------
00000101 3.10132265
[23512] Public API called: IpcGetErrorMessageText
00000102 3.10132265
[23512] hrError: 0x80070002
00000103 3.10132265
[23512] dwLanguageId: 1033
00000104 3.10215545
[23512] Public API IpcGetErrorMessageText exited with return code 0x00000000
00000105 3.10215545
[23512] \-----------------------------------------------------------------------
00000106 4.53870678
[23512] /-----------------------------------------------------------------------
00000107 4.53870678
[23512] Public API called: IpcFreeMemory
00000108 4.53870678
[23512] pb: 0000005F3D4324F0
00000109 109.36756897
[24016] SHIMVIEW: ShimInfo(Complete)
00000110 118.99750519
[24088] SHIMVIEW: ShimInfo(Complete)
Any help will be much appreciated
Thanks
SN -
Standard tcode FBL5N dump in pre production.
I am getting a dump when I execute the standard tcode FBL5N (Customer line item) with one company code. FBL5N tcode is not at all giving dump in production system, however it dumps in pre production.
The dump exists in the function module : fdm_local_get_objects_range while executing the SELECT stmt
*SELECT * FROM fdm_dcobj*
INTO CORRESPONDING FIELDS OF TABLE et_object_data
WHERE logsys LIKE i_logsys
AND obj_type LIKE i_obj_type
AND obj_key IN it_range_obj_key
AND relation LIKE i_relation
AND case_guid_loc IN it_guid
AND is_confirmed LIKE i_confirmed
AND is_voided LIKE i_voided.
Do I need to search for sap note ?
Below is dump analysis
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in procedure "FDM_LOCAL_GET_OBJECTS_RANGE" "(FUNCTION)", nor was it propagated by
a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL statement violates a
restriction imposed by the underlying database system of the ABAP
system.
Possible error causes:
o The maximum size of an SQL statement was exceeded.
o The statement contains too many input variables.
o The input data requires more space than is available.
o ...
You can generally find details in the system log (SM21) and in the
developer trace of the relevant work process (ST11).
In the case of an error, current restrictions are frequently displayed
in the developer trace.
How to correct the error
The SAP Open SQL statement concerned must be divided into several
smaller units.
If the problem occurred due to the use of an excessively large table
in an IN itab construct, you can use FOR ALL ENTRIES instead.
When you use this addition, the statement is split into smaller units
according to the restrictions of the database system used.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:Note Still Valid in Market place.
"SAP Note 1111155 - FSCM-DM: Termination "Open SQL
statement is too large."
Note Language: English Version: 10 Validity: Valid Since 07-28-2010
Summary
Symptom
When you access dispute case using the integration (creating dispute case
using FI transactions (for example, FBL5N), clearing items to which dispute
case have been assigned), the system issues the dump "Open SQL statement is
too large".
The error occurs if there are many (more than 1000) dispute cases for a
customer.
Other terms
FBL5N, FBZ1, F-32, integration
Reason and Prerequisites
This problem is due to a very large dispute case volume.
Solution
Import the relevant Support Package or implement the attached correction
instructions.
Header Data
Release Status: Released for Customer
Released on: 07-28-2010 08:02:45
Master Language: German
Priority: Correction with medium priority
Category: Program error
Primary Component: FIN-FSCM-DM Dispute Management
Valid Releases
Software Component Release From
Release
To
Release
and
Subsequent
SAP_APPL 600 600 600
SAP_APPL 602 602 602
SAP_APPL 603 603 603
SAP_APPL 604 604 604
SAP_APPL 605 605 605
PI 2004.1 2004_1_47" -
Cannot enable "Updates for other Microsoft products" on WSUS client
i cannot enable the checkbox "Give me updates for other Microsoft products when I update Windows" ("Microsoft update" instead of "Windows update"). If I enable it and press ok, the GUI stalls a bit and the check is removed.
Installing updates from the wsus server works. The client is a 2012 R2 install.
From Windows updatelogs, it is clear the client attempt to connect to <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=521&L=en-US&P=&PT=0x7&WUA=7.9.9600.17404> when I try to enable
Microsoft update
This is not allowed by firewall/proxy, so this obviously fails.This server is located in a secured vlan and should not have access to internet in any way. I suppose client should fetch the .cab from wsus?
2014-12-17 14:44:45:376 836 137c AU ########### AU: Setting new AU options ###########
2014-12-17 14:44:45:376 836 137c AU # Policy changed, AU refresh required = No
2014-12-17 14:44:45:376 836 137c AU # Policy Driven Provider: https://wsusserver.mydomain.tld
2014-12-17 14:44:45:376 836 137c AU # Detection frequency: 4
2014-12-17 14:44:45:376 836 137c AU # Approval type: Pre-install notify (Policy)
2014-12-17 14:44:45:376 836 137c AU # Auto-install minor updates: No (Policy)
2014-12-17 14:44:45:376 836 137c AU AU settings changed through User Preference.
2014-12-17 14:44:45:376 836 137c AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-17 14:44:45:376 836 137c AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-17 14:44:45:392 836 137c SLS Retrieving SLS response from server...
2014-12-17 14:44:45:392 836 137c SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=521&L=en-US&P=&PT=0x7&WUA=7.9.9600.17404
2014-12-17 14:45:07:267 836 137c Misc WARNING: Send failed with hr = 80072ee2.
2014-12-17 14:45:07:267 836 137c Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-12-17 14:45:07:267 836 137c Misc WARNING: Send request failed, hr:0x80072ee2
2014-12-17 14:45:07:267 836 137c Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=521&L=en-US&P=&PT=0x7&WUA=7.9.9600.17404>. error 0x80072ee2
2014-12-17 14:45:07:267 836 137c Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-12-17 14:45:07:267 836 137c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-12-17 14:45:07:267 836 137c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-12-17 14:45:07:267 836 137c SLS FATAL: SLS:CSLSDownloader::GetUrlContent: DoFileDownload failed with 0x80072ee2
I can set the cab path myself if I use
vbscript to register the microsoft update service, but I don't know which cab url I should use for this.
I've used the same install image before, but I think all servers had access to internet (via proxy) when doing the first windowsupdate. this is no longer allowed. the image is an MDT installation image that attempt to enable the Microsoft update setting
with vbs as described in link above.
Please advice how to resolve this issue.
MCP/MCSA/MCTS/MCITPI was not aware if that, thanks! Is this documented somewhere?
Well, no, not really. Presumably there is no need to do so. The two environments use completely different classification methodologies which have almost zero relationship to one another.
The issue is this is checked for in the server security audit, all servers have this setting, but this one hasn't. I will need to be able to motivate/proof this point to our security department.
I would say your security department maybe needs to do some of their own self-education on how Microsoft's patch management system has worked for the past twenty years, and more recently, how it has worked with SUS/WSUS for the past eleven years. This is not
new stuff! :-)
Also odd is that on this server I only have one service in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RequestedAppCategories.
Don't really know much about what's in the ~\CurrentVersion\WindowsUpdate key either as it's also irrelevant to the WSUS environment.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
UCS pre-production test plan from cisco
Hi,
Is there a pre-production tests plan from cisco to validate that a new UCS setup is A-OK?
I found some stuff on google. But nothing from cisco.
Thanks for any help.
Stephane.Hi Stephanie,
I am unaware of a particular pre-production test plan from Cisco to validate UCS setup but I do believe that Advanced Services is available in this regard, to assist. However, I suspect that this is not the level that you are requesting.
Thanks.
-Bruce -
Hi, How to do pre-production planning for the possible production with current resources in a stipulated time and resources required for completion of specified production qty with the stipulated time. i also need to condisder maintenance schedule etc.pls advise.
Dear Yadav,
In my understanding LTP is one way of doing the pre-production planning for a material or a list of
material through simulated planning and using the simulated planned orders.
This can be used for doing vendor analysis and also to check the capacity anaylsis.
Based on this you can modify the production plan or go for extra shift or extra resources to meet the
plan or adjust the plan as per the available capacity.
To know explore more about LTP,check this thread,
LTP - CM38
Just hold on for other's suggestions on the same.
Regards
Mangalraj.S -
Windows 7 and Windows 8 Driver Availability Chart for Creative's products
Hello Everyone,
There is a Knowledge base article that contains the Windows 7 and 8 Driver Availability Chart for Creative's products.
Thank you.
Mod Notes: Updated the link and include Windows 8.For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device. -
Report for sales target & Production target
Report for sales target & Production target which should include the following fields
Sales Target
Revised Sales Target
Production Target
Revised Production Target
Action Need to be takenHi
If you are using sales and operation planning in make to stock scenario its simple . As You input target sale plan and target production plan for whole one year (MC84) . So this data can be pulled out from the tables .
For Action Need to be taken and revision you may need to have new table .
Neal -
PSD source file for animated GIF's - Fireworks CS3
hi
i've upgraded to Web Premium Suite CS3.
Q: i have several PSD source file for animated GIF's created
with ImageReday.
how can i open/iomport/convert it in/to Fireworks CS3 without
looing the "animation"
many thanks
Ueliugisiger wrote:
> hi
> no any extras. simply 5 layers "distributed" on the
timeline.
> if i open a "animated" psd, so i get a file with the
layers and one frame, but
> loosing animation stuff like "when show witch layer an
for how long"
> -> there is no conversion to FW frames.
>
> Ueli
>
I don't do animations in PS or IR, but if you like, send me
the file
and I'll see if I can figure something out.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver -
Is there support for animated .gif files?
Is there support for animated gif files using
form builder? I can't get it to work.
Thanks
Sean
I am using forms 6.0She used the Link Tool, specfied 'Image URL' as the Source File Format and the url of the animated GIF in the Source Filename. Hope that helps.
Makes sense but the form is not for the web.
I have looked at doing it with timers and switching canvases, but that is just too much
for sloppy animation. It's just not tight enough.
Thanks,
Sean
null -
Set frame delay time for animated gif using ImageIO
I'm trying to change the delay time of each frame for an animated gif by changing the metadata for each frame as following but it doesn't change anything.
static private IIOMetadata setMetadata(IIOMetadata metadata, int delayMS) throws IOException
Node root = metadata.getAsTree("javax_imageio_gif_image_1.0");
for (Node c = root.getFirstChild(); c != null; c = c.getNextSibling())
String name = c.getNodeName();
if (c instanceof IIOMetadataNode)
IIOMetadataNode metaNode = (IIOMetadataNode) c;
if ("GraphicControlExtension".equals(name))
metaNode.setAttribute("delayTime", Integer.toString(delayMS));
}Does anyone know how to set delay time for animated gif using ImageIO ?I'm trying to change the delay time of each frame for an animated gif by changing the metadata for each frame as following but it doesn't change anything.
static private IIOMetadata setMetadata(IIOMetadata metadata, int delayMS) throws IOException
Node root = metadata.getAsTree("javax_imageio_gif_image_1.0");
for (Node c = root.getFirstChild(); c != null; c = c.getNextSibling())
String name = c.getNodeName();
if (c instanceof IIOMetadataNode)
IIOMetadataNode metaNode = (IIOMetadataNode) c;
if ("GraphicControlExtension".equals(name))
metaNode.setAttribute("delayTime", Integer.toString(delayMS));
}Does anyone know how to set delay time for animated gif using ImageIO ? -
Get an older version of GarageBand for iOS (pre 2.0.1)?
How do I get an older version of GarageBand for iOS (pre 2.0.1)? Other than this method :
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/app-store -downloading-older-versions-of-apps-ios
I have been all over that article trying to figure this issue out. The problem for me is, my app store, my wife's app store, my friend's app stores, etc. all have updated versions of GarageBand iOS and we have updated iOS to 7. I can't downgrade to iOS 6 any longer. I've asked a friend to trade me his old iPad for my newer one! And on and on to no avail.
Is there a way I can download a pre - 2.0.1 version of GarageBand iOS from a 3rd party? Can the file be placed somewhere and then onto my Mac via iTunes? I have contacted app store support about this. They offered to refund my $4.99, but cannot give me my also purchased (on a different account and updated there as well) old version of GB iOS.
I have a compatibility issue between the latest GB for iOS and Logic Pro 9 on the Mac. LP 9 will not open the latest version of GB iOS. I cannot download LP 10 bc my 2007 MP is 32-bit EFI. I'm not comfortable w/ the hacks for getting Mavericks, etc. as I'm not computer savvy. I'm a songwriter who wants to write and record as simply as possible. My current set-up runs like a tank. GB iOS is great for getting ideas down when on the road. Then I flesh things out on the Mac in LP and add the audio tracks there as well.
Anyone know a workaround for opening GB 2.0.1 iOS in LP9? I don't want the audio BTW, just the MIDI. I can find the audio by show package contents, etc. but I can't see the MIDI info in the folder. Maybe my OSX won't recognize as I could possibly do this manually? When I unpack a pre-2.0.1 GB file on the Mac, I can see both the audio and the MIDI, but not on the new GB ".band" file. Any thoughts or ideas are welcomed. Thank you!
Mac Pro 1,1 June 2007
2x Quad Core 2.66 Ghz Intel Xeon
16 GB RAM
2 HD's
Logic Pro 9.1.8
Snow Leopard 10.6.8Thank you! Can you please explain? Can I still record in GB iOS and then use the MIDI synth app? Where is the MIDI synth app - on the iPad or Mac? How do I get the MIDI info to the Mac - by iRig MIDI or USB? Please break down the process if you can and I will try it. Looks like great idea, I just need a little more info. Thanks!
-
How to obtain the license for the mentioned products.
Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
SivaThanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva. -
Do I need to have a separate Apple ID for each apple product we own if I do not want to share my contacts with my children
Yes. And separate user accounts on the computer if you only have one computer.
How to use multiple iPhone, iPad, or iPod devices with one computer
Maybe you are looking for
-
Where can i find a "radio edit" version of the song All About That Bass?
I'm looking for the song by Meghan Trainor, not any other version, but one that is edited for radio (no swears). There are 2 on iTunes, one is "Deluxe" and that's what I downloaded, but it's not edited. Anyone know how to get the radio version?
-
how can i enable my ipad2
-
I just wanna know if how can I access the Audio Profiles because in my Ideatab A3000 Settings, it wasn't shown there (as shown in this picture). My sister has also her own IdeaTab and I found her settings with Audio Profiles.Please help me. thank you
-
Problem in constructing URL from Image file
Hi, i have a requirement , have to construct a URL object with an absolute image file.. like URL url = new URL("/resources/image1.gif") url.getpath() But url is returning null, as it couln't found rela path.. but previously i have using String realPa
-
Iphoto isn't importing iphone photos
When I try to close IPhoto it says : Photos are being imported to the photo library. Please wait for import to complete. This happens when I am not trying to import any photos. Then when I have my IPhone connected it will not allow me to select eit