FCS Not Updating from WSUS / Cannot open MOM Console / Cannot connect to MOM DB

Hi,
My original problem was that FCS was not updating from WSUS. Then after reading up, and trying a whole lot of different things I managed to break it further. Now I cannot open the Microsoft Forefront Client Security Console on the management server, The
Administrator Console and the Operator Console cannot connect to the Management server (They are on the management server)
As a side note: The reporting hasn't worked at all, not even after the last Systems Admin reloaded the whole FCS implementation.
I need assistance to get everything working again, and I think it might take a while to get everything resolved.
I don't know what information to provide so here is some to start with:
I believe this is a on server topology:
1. There is the management server, with all the roles except the "distribution" role installed.
2. The updates to FCS are set to go through our WSUS server.
3. The WSUS server works fine in all regards except to push the FCS updates through (I release other MS updates every week and they all go through)
4. Management server is 32-bit Windows Server 2008 Standard with SP1, with Microsoft Operations Manager 2005 (Unsure of SP1 is installed, but I think it is), and Microsoft SQL Server 2005 (It doesn't have the SQL Studio thing)
5. I have domain admin credentials
6. When opening the Microsoft Forefront Client Security console it crashes with a "MMC has detected an error in a snap-in and will unload it". Clicking on ok gives a new error page of exception: "System.Reflection.TargetInvocationException"
7. Opening the Operator console give a message of "Error connecting to server" and clicking on ok brings up the console settings where you specify the MOM management server etc
8. Opening the Administrator conolse immediately brings up the "Connect to a different MOM Management Server" window.
I am hoping that someone here can ask the right questions and helped get through all these issues to get this system working again

Thanks Quan and Faron for your replies. Firstly, when I logged into the server today and tried to open the consoles, the FCS console did not give me an error. Before I originally posted my message I already downloaded and tried that hotfix. The problem is
there is no SQL Management Studio. Microsoft SQL Server 2005 is installed.
The only error that really stands out is this one under the application logs:
Source: Microsoft Operations Manager
Event ID: 20607
The Data Access Server (DAS) on computer SSCIS04 returned an error. System error code: -2147217770 System error text: IDispatch error #3222 DAS method called: ConfigurationGetOnePointFreeSpace Called from file: d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp
Called from line: 984 Other than that there are some terminal server printer errors and print spooler errors (which are common on pretty much all our servers), and Heartbeat errors (Event ID: 21213: Heartbeat update failed for 1 or fewer agents. Error details:
IDispatch error #3222)
I have just checked again and the FCS console is still opening without error. And I can start a scan. (No clients report back to the server though)

Similar Messages

  • Windows 8.1 will not get Forefront Client Updates from WSUS

    Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2.  After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS.  So I enabled TLS on the Server 2008 R2 WSUS server
    and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010.   My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
    latest client version being 4.5.  However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
    I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should??   I am wondering if I manually install the 4.1 client update if it will take the client updates after that.  
    I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.

    I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
    http://support.microsoft.com/kb/2952678
    http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
    Also, you may be affected by this:
    "Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8<sup>th</sup>,
    anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
    4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
    will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
    http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx

  • Windows 2012 r2 not able to get windows updates from WSUS 2012 r2

    One of our windows 2012 R2 server is not getting windows updates from WSUS 2012 R2 but other 2012 R2 are getting updates.
    I found on windowsupdate log on the server saying "WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037"
    Not sure what is the issue.

    I believe the warning isn't really relevant in this case. Could you post a recent section from the windowsupdate.log from that machine?
    0x80240037 WU_E_NOT_SUPPORTED The functionality for the operation is not supported.

  • Microsoft Security Essentials not taking definition updates from WSUS Server.

    Hi Experts,
    I have a WSUS server installed on network on which MSE definition updates are installed, but the MSE on the client computer is not getting updates from it.
    When I click the update button it gives me error "Virus and spyware definitions couldn't be updated".
    The error code i am getting is 0x80244018. The definition updates couldn't be installed please try again later.
    I also have TMG on my network as a default gateway, I want to update MSE from WSUS not from microsoft update.
    Do I have to change rules....??? or any suggesstions that how MSE can be automatically updated from WSUS, the WSUS setting is saved into a GROUP Policy and applied....
    Please advice......

    The error code i am getting is 0x80244018.
    This is an HTTP 403 error, which is generally (but not always) indicative of a proxy server interfering with the download. Assuming this is happening when the client is trying to get Definition Updates from Microsoft during the daily scan, this error will
    likely go away once you properly set up WSUS to provide the definition updates.
    I want to update MSE from WSUS not from microsoft update.
    To do this, you need the following:
    The Definition Updates classification must be configured for synchronization.
    An Automatic Approval rule that approves the Definition Updates classification for the appropriate target group(s) must be configured and enabled.
    The policy setting Allow Automatic Updates immediate installation must be ENABLED.
    Your WSUS server should be configured to synchronize multiple times per day (at least 2).
    Your clients should be configured with a shorter Detection Frequency (8 hours is ideal).
    With the above configured, the clients will check the WSUS server 3x-4x per day, find the latest available Definition Update, download it and install it immediately.
    Note, however, that if the client fails to download and install Definition Updates, MSE will continue to do a check, and attempt to update the Definition Updates during the daily scan. If your TMG blocks the client's Internet access, then they
    will continue to log HTTP 403 errors when this definition update attempt is executed. (This is why you configure multiple syncs and scans per day -- so the client *never* has to go to Microsoft to get the current definition updates.)
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • System center endpoint protection update from WSUS faild on some computers: error 0x80070005

    Hi, some computers, not all fail to update from WSUS.
    Manual installing the full updates works.
    From Windowsupdate.log:
    WARNING: Failed to delete old install directory at C:\Windows\SoftwareDistribution\Download\Install. This may block future installs.
    I also cannot manually delete this folder, after a fresh reboot there is no more Install folder.
    From System logs:
    Sorry, the errors are in German:
    Beim Aktualisieren der Signaturen wurde von Microsoft-Antischadsoftware ein Fehler festgestellt.
         Neue Signaturversion:
         Vorherige Signaturversion: 1.169.55.0
         Aktualisierungsquelle: Interner Server für Definitionsupdates
         Aktualisierungsphase: Installieren
         Quellpfad: http://sus-server:80
         Signaturtyp: AntiVirus
         Aktualisierungstyp: Vollständig
         Benutzer: NT-AUTORITÄT\SYSTEM
         Aktuelle Modulversion:
         Vorherige Modulversion: 1.1.10401.0
         Fehlercode: 0x80070005
         Fehlerbeschreibung: Zugriff verweigert
    Beim Aktualisieren der Signaturen wurde von Microsoft-Antischadsoftware ein Fehler festgestellt.
         Neue Signaturversion:
         Vorherige Signaturversion: 1.169.55.0
         Aktualisierungsquelle: Microsoft Update Server
         Aktualisierungsphase: Installieren
         Quellpfad: http://www.microsoft.com
         Signaturtyp: AntiVirus
         Aktualisierungstyp: Vollständig
         Benutzer: NT-AUTORITÄT\SYSTEM
         Aktuelle Modulversion:
         Vorherige Modulversion: 1.1.10401.0
         Fehlercode: 0x80070005
         Fehlerbeschreibung: Zugriff verweigert
    Client is manually install, unmanaged, no SystemCenter server.

    I know this is an old post, but I've seen this several times on client pc's.  Seems to happen only with .NET updates, it'll install one, then fail the rest.  Windowsupdate.log file shows   WARNING: Failed to delete old install directory
    at C:\windows\SoftwareDistribution\Download\Install. This may block future installs.   It seems like concurrent installs fail because of this folder, and like the OP, when I reboot, that folder is gone and I can install the next update, which fails
    the remaining updates, and then we repeat the process.  This actually happened to me today new pc build, installed .net 4.0, .NET updates fail with error code 80070005. Yes, I'm logged in with an admin account.   Anyone have any suggestions? 
    I can post log files or whatever if needed.
    Tim Magnuson | MCTS, MCITP | MCCA 2011 |
    Ok, so I changed my name...you can still call me Tom if you like. It's a...jump...to conclusions...mat.
    My Blog Site: http://tmagnuson.wordpress.com

  • How to update from WSUS 3.2 SP2 running on Windows 2008 R2 to WSUS 4.0

    Hello, with WSUS 4.0 already in the market, is it adviseable to update from WSUS 3.2 SP2? I am looking at a bare installation of WSUS 4.0 in Server 2012 R2, from basic looks I have not seen yet anything different. We have 12 WSUS servers
    servicing a wide area, and before going ahead with any update of this infrasturture I would like to know of anyone has gone this upgrade path yet? Thanks 
    Shahidul

    is it adviseable to update from WSUS 3.2 SP2?
    I don't think it's critical to upgrade to WSUS v6 at this time, unless your WSUS v3.2 server is still running on a 32-bit system (or any form of WS2003). If you're running WSUS v3.2 on WS2008/WS2008R2 (x64), then those platforms will continue to be supported
    until 2020, so there's no immediate need. However, if you're contemplating a major migration of all systems to Win8/WS2012 environments, then it makes sense to migrate the WSUS server also. If you expect to have Win7/WS2008R2 systems online for the foreseeable
    future, then WSUS v3.2 x64 will continue to meet your needs.
    I am looking at a bare installation of WSUS 4.0 in Server 2012 R2, from basic looks I have not seen yet anything different.
    The most notable difference is a much richer PowerShell interface, so if you're inclined to use PowerShell to manage WSUS, that would be an advantage.
    A notable disadvantage is that you can only partially manage a WSUS v6 system from a Windows 7 workstation: Local publishing requires that activity to be performed from the same generation of system. For example, WSUS v6.3 can only be published to from a
    WS2012R2 or Win8.1 system; WSUS v6.2 can only be published to from a WS2012 or Win8.0 system. This is due to internal dependencies on the BUILD number of the WSUS API.
    I suspect the dependency was a manifestation of protecting WSUS v2 and WSUS v3 systems back in 2007 (local publishing was first introduced in WSUS v3.0), but with SIX possible builds of WSUS now available, it's becoming a major PITA!
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Cannot open page Safari cannot open the page because it could not establish a secure connection to the server

    Hello Apple Experts!!
    I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
    The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
    The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
    Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
    This is happening only on the OS 5 and on the OS 4 everything works just great!!
    I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
    Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
    Any help on the same will be much appreciated!!
    Regards
    Surendra

    I'm having a similar issue.  Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
    I checked the ciphers enabled by their page, and this was returned:
      High Strength Ciphers (>= 112-bit key)
        SSLv3
          EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1  
          DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1  
          RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5   
          RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1  
        TLSv1
          EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1  
          DHE-RSA-AES128-SHA         Kx=DH         Au=RSA     Enc=AES(128)     Mac=SHA1  
          DHE-RSA-AES256-SHA         Kx=DH         Au=RSA     Enc=AES(256)     Mac=SHA1  
          n/a                        Kx=DH         Au=RSA     Enc=Camellia(128)  Mac=SHA1  
          n/a                        Kx=DH         Au=RSA     Enc=Camellia(256)  Mac=SHA1  
          DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1  
          AES128-SHA                 Kx=RSA        Au=RSA     Enc=AES(128)     Mac=SHA1  
          AES256-SHA                 Kx=RSA        Au=RSA     Enc=AES(256)     Mac=SHA1  
          n/a                        Kx=RSA        Au=RSA     Enc=Camellia(128)  Mac=SHA1  
          n/a                        Kx=RSA        Au=RSA     Enc=Camellia(256)  Mac=SHA1  
          RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5   
          RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1  
    This appeared to be a more than sufficient cipher list, yet my iPad won't load any page.  I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
    Any ideas?

  • Server behind TMG to grab updates from WSUS server

    Hey Guys,
    The last topic I created about grab superseeded updates from WSUS, is what this is stil about cause I can't accept this installing updates manually as a answer. So I went ahead an did even more research on this.
    To keep it simple I went ahead and adjusted the Local Group Policy / Computer Conf / Admin Templates / Windows Comp / Windows Update / Specify an intranet Microsoft update server (http://172.16.3.3:8530)
    Allowed a Rule through TMG to allow by directional traffic of TCP 8530 between the server lan (172.16.8.x <-> 172.16.3.3)
    When I click check for updates its good I can see the established connection using netstat on port 8530.
    As soon as I click download updates, it tries to grab from internet based Servers... i can see the SYN_SENT right away and I can see the blocked http traffic on the TMG.
    So I went ahead and set the GPO setting and removed the port allocation behind it (http://172.16.3.3) Doing a netstat after clicking check for updates showed connection attempt to 172.16.3.3 via http, So I added the protocol to the allow rule between the
    servers, and sure enough it changed to established, and I see the allow through the TMG. However this now gives an error when i click on check for updates...
    There has to be a way for me to get this dang server to get updates from our WSUS server on the other side of the TMG firewall.. but how?! what am I doing wrong?!
    *NOTE* with the port specified in the local GPO of 8530, I can access http://wsus/selfupdate/wuident.cab perfectly fine. I ran wuauclt /detectnow and no errors reported in the WindowsUpdate.log file
    *NOTE* The Wsus server is setup to cache all update to a local dir, attempted to see the files in there but all contained random string .cab files, wish they would just contain just the KBnumber and the msu files for easier verification of updates available
    in the cache.

    The last topic I created about grab superseeded updates from WSUS, is what this is stil
    A LINK to that post would be most helpful as I am absolutely clueless about what this post is about.
    Allowed a Rule through TMG to allow by directional traffic of TCP 8530 between the server lan (172.16.8.x <-> 172.16.3.3)
    The correct implementation for TMG is to create a Web Publishing Rule for the WSUS Server and ALLOW passthru of the client identity.
    When I click check for updates its good I can see the established connection using netstat on port 8530.
    As soon as I click download updates, it tries to grab from internet based Servers... i can see the SYN_SENT right away and I can see the blocked http traffic on the TMG.
    So I went ahead and set the GPO setting and removed the port allocation behind it (http://172.16.3.3) Doing a netstat after clicking check for updates showed connection attempt to 172.16.3.3 via http, So I added the protocol to the allow rule between the
    servers, and sure enough it changed to established, and I see the allow through the TMG. However this now gives an error when i click on check for updates...
    I see that you've specified a PRIVATE IP Address as the target of the WSUS server (172.16.3.3), so the first set of questions revolves around why there's a TMG server involved in the first place, where this "WSUS Client" is located with respect to the
    TMG interfaces, and where the WSUS Server is located with respect to the TMG interfaces. Maybe all of this is in the original post... wherever that might be. I'm going to assume that you're *routing* traffic through the TMG from one private network to another
    private network, most likely from the DMZ to the WSUS server in the Internal LAN. (Just an educated guess.)
    The second set of questions... is 172.16.3.3 the IP Address of the WSUS Server on the Internal LAN, or is that the address of the DMZ Interface on the TMG. Configured correctly, it should be the former.
    Third set of questions.... always a question I ask because it invariably sheds amazing insights into other network issues.... Why are you configuring the policy with an IP Address, rather than the hostname of the WSUS server?
    There has to be a way for me to get this dang server to get updates from our WSUS server on the other side of the TMG firewall.. but how?!
    Properly configure a Web Publishing Rule. It's that simple. I have a WSUS server "published" to the DMZ so I can patch my DMZ servers and it works perfectly.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Delta records not updating from DSO to CUBE in BI 7

    Hi Experts,
    Delta records not updating from DSO to CUBE
    in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
    I cheked in Change log table in DSO its have 5 records
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -  -1
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
    ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
    but active data table have one record - 0
    how to corrcct the delta load??
    Regards,
    Jai

    Hi,
    I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
    Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
    The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
    The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
    Is this not what you see in the cube? were the earlier req deleted from the cube?

  • After I sync with iTunes my iPad Calendar is not updated from my computer where I keep my dates on Abacus. It used to do this. What's wrong?

    After I snync with iTunes my iPad Calendar is not updated from my computer where I keep my dates in Abacus. It used to do this.

    Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

  • Lync 2013 Photos will not update from AD

    I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs;  Replicate this attribute to the Global
    Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
    "Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"  
    and finally we are setting the photo in ad using:
    "Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
    The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
    also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
    EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
    do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

    Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
    What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
    this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
    it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
    but unfortunately no change on my Client. I still see these users original photos.
    Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
    the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
    We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
    More info on the environment:
    4 main sites + remote users
    ~7DC's - 2003 DFL (1 at each site + a few at HQ)
    3 Lync Front end servers (2013) (All located at central HQ)
    2 Lync edge server (2013) (All located at central HQ)
    1 - 2010 Exchange server (Located at central HQ)
    2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
    About 100 HP 4110 Lync Edition Desk phones
    Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

  • IPad 2 will not update from version 4.3.5 (8L1).

    I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

    Naalamc wrote:
    It's an ASUS, Windows 8, Version 11.1.3.8
    Thank you.
    Your iPad has iOS 4... See Here >  http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • My contacts are not updating from the iCloud. How can I actively go and retrieve them?

    My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?

    Hello there, Lk354.
    The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
    Get help using iCloud Contacts
    http://support.apple.com/kb/TS3998
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Status is not updated from delivery to sales order item.

    Dear Folks,
    One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
    Thanks & Regards,
    murali.

    Dear Murali,
    Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
    I hope it will help you,
    Regards,
    Murali.

  • CC Photoshop not updating from 14.0 to 14.2.1

    Hi All,
    I'm having an issue where my CC Photoshop will not update from version 14.0 to 14.2.1.  I've signed out, uninstalled the Creative Cloud desktop app and re-installed it, but the issue persists.  I also uninstalled and re-installed CC Photoshop and it still downloaded and installed the other version.  Can anyone help point me in the right direction with what to do next?
    Thanks!; trouble

    Moving this discussion to the Creative Cloud Download & Install forum.
    Rocketscience I would recommend reviewing the installation log for the update to determine why it is failing.  You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.  You are welcome to post any specific errors you discover to this discussion.

Maybe you are looking for