Fcx-creating multicam clip with two different frame rate

I have created a multicam clip with 2 clips, one shot with iphone 3gs, 15 fps, and the otherone with a dslr
i remember that with fc7 the main task to accomplish this was to shot with same setting but now it seems to work althought they are not same.
how final cut process the clips when tries to sync them ?
thams

Similar Messages

Problem FCP6. It is impossible to create multicamera clip with DV and HDV.

Problem FCP6. It is impossible to create multicamera clip with DV and HDV. I wish to create the multicamera clip from files dv and hdv. But the program informs that it is impossible because the different size frame. Video dv and hdv in the multicamera are incompatible? (Excuse for possible errors in the text)

Ken Summerall, Jr. wrote:
Do I need to export this as a movie before I can use it to be allowed to Multiclip with the DV footage?
How else are you going to use it?
I thought somehow there was a way to use the sequence itself into the multiclip.
Like a nested sequence used as a clip.
Thanks for your help.

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?, How do I create a graph with two different y-axis variables with the same x-axis (therefor having two curves)?

Hi Libby,
Select all three columns of data. All three must be 'regular' columns, not Header columns, and the X values must be in the leftmost column.
Click the Charts button and choose the Scatter chart.
The resulting chart will initially show only the first and second columns of data, and the selection will have been reduced to show this.
Click the gear icon at the top left of the selection and choose Share X Values.
You should see a result similar to this:
Notes:
The values on my sample table contain a random element, so they have changed from thhe first image to the second.
The chart is as created by Numbers, with two edits:
Data points have been connected with curves, using the Chart nspector.
The curves were selected and their stroke increased to 2pts, using the stroke formating button in the format bar.
Regards,
Barry

Help with sequence settings in final cut for project with 2 different frame rates.

I really need help with this one! I finished editing a wedding video and realized after exporting that it was filmed in two different frame rates. This has happened before but I converted the footage to match and fixed the problem. In this case, the footage is part 30fps and part 60fps. The majority of it was filmed in 30fps. I cannot convert the 60 to 30 without the slow motion effect which I do not need so I have to find a way to burn this to a DVD without it looking messed up! The video was shot with two Canon 7ds if that helps anything. The first sequence I set at 29.97 and exported as a quicktime movie and all the footage filmed in 60 looked perfect and the footage in 30 looked jittery. Then I tried the sequence at 59.97 and it switched. The footage filmed at 30 looked good and the 60 was cropped in. I am so confused! Any advice or suggestions would be greatly appreciated!!

Thanks for your help Michael! The frame rates are 29.97 1920 x 1080 and 59.94 1280 x 720. I did a control click on the clips in final cut and viewed the item properties/format to find this info. The Canon 7d is a DSLR but we use it for video. As for my workflow, the first thing I do is import the footage onto my computer and then drag the clips into mpeg streamclip. I choose apple prores 422 and uncheck the interlaced box. Once this is done I import the .mov files into final cut. The sequence automatically sets itself to whatever clip I drag in first so it originally set as 29.97. When I finished editing wedding video, I export it to a quicktime movie and choose whatever settings match the sequence, in this case apple prores 422 1920 x 1080 30p. Once that is done I use iDVD to burn the discs.
I knew something was wrong when I watched the quicktime movie and all the 30fps footage was jittery and most of the cross dissolves looked strange. That's when I figured out the footage was at two different frame rates. What I don't understand is why whatever the sequence is set at in final cut, the clips of the opposite frame rate look right but the clips set at the matching frame rate don't???

Wether can invoice have with two different VAT rates, 16%

Dear SDN team,
I have a requirement like a invoice should have two different VAT rates.
Situation is below:
A rebate agreement is created and it was settled partially and final settlement is also carried out.
Rebate agreement nº XXXXXXXX, with a validity period between the 01.05.2010 until 31.07.2010. This rebate agreement created the credit memo XXXXXXXXX with the VAT rate of 18%.
Mean time the VAT rate was changed from 1st July from 16% to 18%.
There are invoice created in the first half and others belonging to the second half. Invoice created during the First Half it was created the VAT value with 16% (Before July)and the Invoice created with the Second Half it was created with 18% (After July1st).
But customer request is to have an invoice with two different VAT rates, 16% and 18%. However, the invoice only takes into account the 18%.
And i have suggested the below resolution - But user still needs to have two different VAT rates in one invoice for the line item this is for the have a legal precept which force me to have a different VAT rates depending on the original invoice date
Please let me advice how to resolve this issue.
Looking forward for your favorable reply.
Thanks and Regards,
Jana
Suggested Solution:
But having two different VAT rates in one single invoice or credit note is not possible at all.
Further if you would liked to have different VAT rates for the two separate ivoices - This can be done by doing the Rebate agreement with partial settlement for the First half that is before 30.06.2010 and final settlement after 01.07.2010. By doing this rebate agreement will have two different invoices created with two different VAT rates. But now this is not possible for the RA where it is done with final settlement.
So, You can not have two different VAT rate in one single invoice.

Dear,
In order to solve this issue with wrong VAt rates I propose you to proceed as follow:
1) Cancel the CN (Credit Note)
2) In the CMR (Credit Memo Request) set the tax classification of the materials with wrong VAT % to 0 (inside the CMR in item-billing document).
3) Maintain for the access sequence of MWST a higher access than the normal one for tax classification 0 with the old tax percentage (E.g.: 16% in your case)
4) Determine a new pricing for the CMR (via menu path: Edit > New pricing document)
At this stage your items will have some 18% and some 16% of VAT. When you create the CN those percentages will be kept.
If you are satisfied with the result it is now a matter of making sure the program that prints your invoice is mentioning the different VAT rates of the items. As you didn't specify anything about this point, I seize the opportunity to advice you about. No matter of the type of print program you are using (SAP script, PDF or Smartforms), you need TO BE SURE that when the CN is created (with two different types of VAT %) also your PRINTOUT is properly created mentioning the two different rates and relative values.
If not printed correctly because you did not foresee to have different percentages it is easy to solve it with a programmer.
In case of questions or doubts do not hesitate to post back your answer.
Regards,

Relink project clips with different frame rate

Somehow the clips in my project sequence ended up with a different frame rate (25) than the original media files (23.95), and they are no longer linked -- maybe this happened during import from iMovie. When I try to relink project files to source media, I get an error message saying they cannot be relinked because they have a different frame rate. I changed the sequence framerate to 23.95 (by creating a new project with 23.95 as the frame rate, then copying and pasting the other timeline into it), but all the clips remain at 25, so the problem remains.
How can I change the clip properties to frame rate 23.95 so I can link to the original media?
Thanks.

The media got unlinked importing the project and events from iMovie to Final Cut.
I've attached screen shots with all the specs.

Re-connecting media to different frame rate clip

Hi guys,
Wondering whether anyone can help me out to solve an error I've made...
So, I've basically completed an edit (some episodes on Final Cut Pro X, some on Final Cut 7) only to find out that I'd transcoded the media at the incorrect frame rate, 23.98 instead of 25fps. Yup, pretty big error. And now I need to redeliver the projects in the 25fps format.
I've transcoded a clip to the correct 25fps rate and tried to reconnect that clip to the 23.98fps one in the timeline, but I'm unable to reconnect as the clips are of differing frame rates.
Has anyone got any ideas how I can reconnect the clips or any suggestions that will make this situation easier to rectify rather than copying out the entire edit which will cause me to spend a week crying into my keyboard.
Thanks in advance for any suggestions.
Olly

Hmmm...
Tried this but it brings in the media that is 23.98 and there's no way I can tell to link to the new 25fps clips. Unless there's anything else I can do? Any other way to match the clips? (the 25fps clips are that little bit longer in duration) I also have some edits in fcp7. By using cinema tools in that would I be able to change the frame rates and link up to the new 25fps?
Cheers for the advice though Russ, this way does give me the template of the 23.98 edit so that I can match the new 25fps shots to, but it's gonna be a long process.

HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
Russ

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Two timecode stripes at different frame rates? (and other BITC stuff)

I'm not an FCP user, but I'm working with an editor who's not that up on the finer points of FCP operation. Would like to know if certain things are possible...
1a. Is it possible for FCP to simultaneously output a QT file with two different BITC stripes running at different frame rates (say, 29.97 fps and 23.976fps)? Or...
1b. For an already BITC'd work print (striped with 23.976 timecode) is it possible to add a second stripe at 29.97 fps, synchronized from the 1-hour mark (first frame of picture)?
2. Are there any parameters available in FCP to adjust the size of the numbers and the position of a timecode stripe?
3. BONUS QUESTION: what does the "R" in "TCR" mean? (just curious -- I've seen this for years but never knew what the "R" stood for).
Message was edited by: iSchwartz

iSchwarz!
Welcome to the visual side of things. Never thought I'd see you venture out of Soundtrack Pro and Logic land, glad to see you here.
3. R stand for Reader. TimeCodeReader. G will stand for Generator. TimeCodeGenerator
2. You mean adjust the TCR window? If you drop the filter on a clip, load that clip into the viewer, you can adjust the filter parameters there.
1b. BITC? There are 2 type of timecode that I'm aware of: VTC (or ViTC)(Vertical Interval Timecode) and LTC (Longitudinal Timecode). I seriously doubt this as then FCP would have to use to different timebases within the same sequence.
1a. Again, I seriously doubt this do to the different timebases.
You could print to tape this 23.976 fps sequence which FCP would add the pulldown resulting in 29.97 fps timecode and then import that. Or, maybe Compressor can add the pulldown and export a file wtih 29.97 fps timecode. Don't know, never needed to try that.
Good luck, report back with your findings.
Zeb

How can I interact between two different frames in the same indesign template as well as from one template to another.

I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.

There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
However if you really want to transfer songs to another computer then you could try this;
* make sure that your ipod is accessible as a disk drive (ipod options)
* when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
* go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
* copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
* import the files from the folder you made in the last step.
* Now your music is on itunes, but with unrecogisable names.
This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
Generic homebuild PC Windows XP
Generic homebuild PC Windows XP

How to process reports with two different date fields

Morning all,
This question is somewhat similar to what I asked few days back. I created two different reports for two different departments (Credit Control and Free of Charge Control).
These two reports pull data from two different date fields and has different status check ups.
Few days back my director requested me if he can have both reports in one report. That is when I asked question from all of you regarding two reports.
Anyhow, that was created by implementing two sub reports however, the director asked me to combine the two different reports into one in such a way that the output records should be added up with each other hence one single report with all combined data of Credit Control and Free of Charges (not two sub reports in one report).
The problem here which I am getting is that, both reports uses two different date fields. I can live with two different statuses as that can be easily done within formula/RT however how to create a report with Report Selection Formula condition which looks in both date fields and produces results accordingly?
I have tried this by not putting any condition in report selection formula and ran the report, it produced total results from past 6 years.
Any ideas how to produce combined report which has two different date fields?
Many thanks in advance
Regards
Jehanzeb
What I

Charliy,
No the both dates are from two different databases, tables and fields. The Credit date field is from KLAB database under max table where as the FOC date field is from SAE database under maxmast table. Klab date is under credit2 table where as foc date is under order header table.
So its more like this:
Klab->Max-Credit2--->Credit_date
Sae->Maxmast->Order_header---Date entered.
two dates totally different tables, dbs
however, I will try your idea too and see if that works.
Regards
Jehanzeb

I am using Windows 8 with iTunes. How do I manage iTunes with two different Windows User Accounts?

I have recently bought a laptop running Windows 8 and downloaded iTunes. I subscribe to iTunes Match and have a large amount of purchased music and imported CDs, along with some films purchased from iTunes.
I have downloaded all of the music and the films to the laptop using iTunes Match when logged in under my User Account in Windows 8. However, when we switch to my girlfriend's User Account, she can load up iTunes but all the music and films have the cloud symbol on them indicating that they need to be downloaded
Is is necessary to download everything to the computer twice (I can't really believe this is the answer) or are we missing something in terms of using iTunes with two different User Accounts?
Thank you.

Step 1
Create a new user account on your device. For Mac users, choose “System Preferences” from the Apple Menu and navigate to the “View” menu. Click on “Accounts” and select the “+” button to add a new user account to your machine. Edit the user information and grant any relevant privileges by following the on-screen prompts.
For Windows users, click on the Windows "Start" button, select “Control Panel” and choose “Add or Remove User Accounts.” A new window will open. Click “Create a New Account.” Name the account and set any relevant privileges by following the on-screen prompts.
Step 2
Sign in to the new user account you created.
Step 3
Open iTunes and click “Sign in.” Enter your Apple ID and password and log in.
Step 4
Download purchases through the iTunes store. All files related to these purchases are stored under the separate user account, thus separating both iTunes accounts and their libraries on the same computer.
Step 5
You can share music from both libraries by dragging your music library to a publicly accessible location on your computer. Click “Preferences” from the iTunes menu and deselect “Copy files to iTunes Media Library when adding to library file.” Add the shared folder to your library from the “File” menu.
Tip
Create more than one library from the same user account by deselecting “Copy files to iTunes Media Library when adding to library file” from the “Preferences” menu. Add the files you want to iTunes by dragging and dropping or by opening from the “File” menu and sync your device to that library. Quit iTunes after the sync and reopen iTunes while holding the "Shift" key in Windows or the "Option" key on a Mac.
(tour du lịch nước ngoài)

Can Same IDOC be sent to same Receiver with two different Message Mappings

Hello Experts,
Wierd doubt but want to confirm from you people.
Scenario:
One R/3 Sender
SAP XI :
One external Receiver :
IDOC is sent from R/3 to external receiver via SAP XI.
One interface has already been developed for the above scenario.
Now client wants another interface to be developed for the same IDOC. Might be the values would be different for some specific fields.
Doubt:
Is it possible to send one similar IDOC to one target system with two different Message Interfaces?
Ex: Created Message Interface 'A' and correspoding Message Mapping with an IDOC
Created Message Interface 'B' and correspoding Message Mappingwith an IDOC
Values would be different in the IDOC and would be triggered from SAP R/3. Basing on the specific value of a field in the IDOC , can we trigger a different Message mapping for the same receiver?
I donot see any reason in developing a new interface for the same IDOC but as per the situation mentioned above, can it be done?
Thank you
Alex.

Create two interfaces for target side.
If you want only one target interface should get data.
You can use simple interface determination. Use the condition tab and specify the field there but the value should be constant. e.g. if field has value EN it should go to First interface and if Field has value != EN it should go to second interface.
If you want to divide your message in to both target interfaces.
Multimapping also can help but only if both of your target interface need idoc data.
You can use ifexist standard node functions from UDF to choose between the field.
For multimapping you can go to messages tab in the message mapping and can add interfaces using + sign.
then when you see the design part you will see two messages.
Now Start with receiver determination in ID and create one receiver determination for the sender and receiver, this shows you have only one receiver.
In interface determination you have to choose extended and choose your mapping designed.
then both your interfaces automatically would appear.
Create two receiver agreements and one sender agreement.
thanks
hemant
Edited by: Hemant on Aug 28, 2008 12:29 AM

Sales Deal with two different validation dates for the same material

Hi SAPers,
I am trying to create a u201CSales Dealu201D VB31, for the same material/condition, but with two different validation dates. After the creation of the first record, I select u201CNew conditionu201D button, but the system give me the message VK104, u201Cthe condition is being processed in the current session.u201D.
How can I solve this issue?
Thanks in advance.
Pedro

We can't have multiple records for the same condition and key values valid on the same date. The condition end date is part of the primary key in the database table. The date ranges between the records cannot overlap. When you create a new record, usually the end date is set to 12/31/9999 by default. If you need to have this deal to end on a different date and a new deal to start afterwards, then first you need to change 12/31/9999 to a different date.
Also usually I try to exit the screen between the transactions.

Fcx-creating multicam clip with two different frame rate

Similar Messages

Maybe you are looking for