FDM Drill thru to Planning

Can I load the data in planning for the dimension that is not existing in planning but when i drill thru from Planning i should see the detailed data.
For e.g.HR Deptt->Salary in Planning
now wen i m loading the data thru FDM it is Employee->Salary->HR
so wen i drill down i shud see the employee details
Can we achieve something like this in FDM...Please help....If yes let me know the functionality through which this can be done..
Thanks

If you bring in a source dimension like employee, you will need to map it to some target. However, you could import into one of the attribute dimensions and then you would not be required to map to a target. When you drill through, you could see these attributes.
So the short answer is yes you can do this.

Similar Messages

FDM Drill Through from HFR

Greetings all -
I have not been able to find much documentation about the new FDM drill through feature from HFR. I'm looking for how it works, what is going on in the background, etc. I assume that it is mostly based on a SQL query back to FDM, but is there more to it than that?
I appreciate any information or documentation to be had.
Thank you,
Sarah

Hello Sarah,
The drillthrough from HFR to FDM is seemless. The Hyperion Applications (HFM, Planning, Essbase) all store the information if it came from FDM in a unique way. This unique way is now an identifier so that drillback is available only for the valid cells. Other products that leverage that data (FR, Smartview, Retrieve) will then interpret that data as well.
The drillback actually launches a pre-built FDM WebPage, Logs you in with the credentials provided via the source, and then displays potential records.
Thank you,

Excel is not showing multiple Drill thru report selection option

We have created 3 drill thru reports in EIS, excel is not showing Select Drill-Through Report Dialog Box when tying to acess drill thru reports. It defaultly executes the first drill thru report, we want it to list the available reports so that we can select accordingly after view/launch is selected.
essbase 7.1.6 version SQl server 2000

Hi,
This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
Regards,
Suman

Cash Management Report FF7B - drill-down from planning levels to AP/AR OIs

Hi
I'm configuring cash management and have created all planning levels and groups needed.
All master data, ie GL accounts, vendors and customers, have the correct planning level or group.
I've created all the groupings etc that I need.
I'm running the reports FF7A and FF7B. I have two questions and problems.
1. When running the Liquidity Forecsat for customers and vendors I drill-down to the standard PL or SL planning levels for AP and AR postings respectively. Then I drill into the planning groups correctly (E1-E9 and R1-R8). But when I try to drill into the cash management detail records (or is it the AP/AR line items?) I get "Memo Records: List - List Contains No Data". This happens every time. Should I now see the AP or AP line items? Or should I see some cash management memo records? I have deleted all the cash management data several times and recreated but I still get this problem (using reports RFFDDL00 and RFFDKU00)
When I do the same for purchase orders, purchase requisitions or sales orders I see a Memo Records List which agrees with the previous planning level total and I can then drill into the actiual POs, PRs or SOs from this list without an issue.
2. When running the Cash Position and I do the drill-down to the GL Line Items, I get an enormous list which does not just show the total of items at the previous planning level. Why is this please? Example: a bank account with a balance of £2,000 (shown on the panning level) but with 000's of line items totalling say £5m. Again I have deleted the CM data and recreated but without any improvement to the problem.
Any help anyone can give me with these issues will be very much appreciated.
Thanks.
Wayne

Hi
I have the same trouble with Tcode FF7B. There´s a message "Memo Records: List - List Contains No Data"; bit in the TcodeFF7A, it runs OK. The message appears just witn Tcode FF7A.
Also, There´s all TR data in tables FDSB for GL accounts, FDSR and FDFIEP for customers/vendors.
Can you help me?? can you solved this issue?
Tanks for your Help

Essbase studio drill thru report Test error

Hi All,
Essbase studio drill thru report is producing the below error: Unable to retrieve drill thru result.
Error in the select statement. Line = 2466.
Error in query execution. Please review the query and try again.
Cannot execute a SQL query
ORA-01791: not a SELECTed expression
Any idea... i am able to test for some of the dimensions but this error is coming for a few dimensiosns .... i verified all the joins between dimensions and facts.. everything is fine.
Thanks,
Praveen

Hi Glenn,
This is a test report executed with in Studio console. Yes, i did verify the generated sql by studio server and was able to drill down to the detail. I dont find any information in the logs when testing this. Probably, i would need to increase logging level. Will do that and update here if i dont find much help there.
Thanks,
Praveen

Essbase Studio drill thru report error

Hi All,
Essbase studio drill thru report is producing the below error: Unable to retrieve drill thru result.
Error in the select statement. Line = 2466.
Error in query execution. Please review the query and try again.
Cannot execute a SQL query
ORA-01791: not a SELECTed expression
Any idea... i am able to test for some of the dimensions but this error is coming for a few dimensiosns .... i verified all the joins between dimensions and facts.. everything is fine.
Thanks,
Praveen

Hi Glenn,
This is a test report executed with in Studio console. Yes, i did verify the generated sql by studio server and was able to drill down to the detail. I dont find any information in the logs when testing this. Probably, i would need to increase logging level. Will do that and update here if i dont find much help there.
Thanks,
Praveen

Hyperion Analyzer Drill thru issue

hi
I have some drill thru reports attached to the one of the cubes. I am using hyperion analyzer for reporting. When i am putting more than one filter from same dimension i am getting below error and drill thru not working.
All selected data cells must be contiguous. Selected cells can span multiple members in one dimension only. Selected cells must share a common parent and must come from same relational column.
The drill thru reports are working for some combination of filters but some other combination it is not working(here the combinations are siblings in outline). Even i saw if i put a filter with child and parent combination the same error coming.
I am not able to figure it out what is the cause? Any help/suggestion wll be of great help.
TIA

Di you get solution for above problem .Please update

Essbase Studio Drill-thru security

I applied a filter in Essbase so a user had filtered access. In Smartview I retrieve data and properly gett the NoAccess message, so far so good. If I do a drill-thru. It drills to the data in my report. I would think IT should prevent drill-thru from occuring. Am I doing something wrong? I don't think it should work this way.

Hi Glenn,
This is a test report executed with in Studio console. Yes, i did verify the generated sql by studio server and was able to drill down to the detail. I dont find any information in the logs when testing this. Probably, i would need to increase logging level. Will do that and update here if i dont find much help there.
Thanks,
Praveen

EIS drill thru

I'm trying to do a drill-through (Thru) report in EIS and can't get it to show up in the Excel add-in. I've tried all sorts of combinations of intersection levels and columns in the report creation. I have drilled to the bottom of all of the dimensions in excel, but the reports still won't show up in the linked object browser. I'm on version 7.1.6 of both EIS and Essbase.
Has anyone run into this before. I even tried recreating the model and metadata outline in case of corruption.
There is another EIS built cube on the server with a drill-thru report and it runs fine. Any suggestions?

Ok, I found if I add
HISLEVELDRILLTHROUGH application_name
to my Essbase.cfg file It at least recognizes that there are reports out there, Now I just get an odd error:
" Invalid selection. All selected data cells must be contiguous. Selected cells can span multiple members in one dimension only. Selected cells must share a common parent and must come from same relational column."
It's interesting it worked on an older version of EIS, just after migration, it stopped working

EIS, ASO & Drill-Thru

How are EIS drill-thru reports exposed to the user in an aggregare storage (ASO) database if linked reporting objects (LRO) are not supported?

Ok, I found if I add
HISLEVELDRILLTHROUGH application_name
to my Essbase.cfg file It at least recognizes that there are reports out there, Now I just get an odd error:
" Invalid selection. All selected data cells must be contiguous. Selected cells can span multiple members in one dimension only. Selected cells must share a common parent and must come from same relational column."
It's interesting it worked on an older version of EIS, just after migration, it stopped working

Is FDM Drill Back Capability for Hyperion 6.5.1 inherent or custom?

Hi,
I am new to the Hyperion Space. I want to understand if FDM drill back capabilities are automatically available for Hyperion Enterprise 6.5.1 or if there is any configuration that needs to done in order to activate this feature. If configuration needs to be done, is it limited to FDM or does one also need to configure Enterprise 6.5.1 to enable the drill back?
Any help is much appreciated.

Hi,
You need to make settings for Ent 6.5.1 / FDM to work with FDM drill back feature.

"XML Load error: An invalid character was found in text content" Drill Thru

Hi,
I am using Smart View, 2007 ms office.
We are using EIS to have Drill Through reports.
When I select the particular intersection and click on Hyperion --> Adhoc Analysis--> Drill Through Reports,
Drill Through selection window is opening but when click on Launch/Execute.
It throwing below Error
"XML Load error: An invalid character was found in text content"
This error is showing only some intersections...some other intersections are working fine.
The same intersection if retrieve from ESSBASE --> Addins--> linked objects, Drill thru reports are showing fine.
From Excel Addins everythg working fine.
I tried in 2003 MS office from my colleague system. the same error.
"XML Load error: An invalid character was found in text content"
Please someone help me....!
Regards,
Rajendra Prasad Gella.
Edited by: Rajendra Prasad Gella on Jun 10, 2010 4:26 AM

This type of Issue does not happen using Excel Add-in but Smart View. We encountered it as well. I have a feeling the root cause is the ESSLANG which used to be selected during installation. If the Essbase has for instance "English Latin1" or "English US Ascii Binary" and the client does not have it, then this would occur.
We had old SR on it because we were testin the APS 7.1.6. SR 2-603906: Excel Essbase Add-in splitting special characters such as the " ü " in. Whe we reinstalled and selected same ESSLANG as Essbase server the isue stopped.
We did not have to chnage our code to scrub out ant special characters. !
Jullin

Filters for Drill thru reports

Can we make the filter available for all users in a drill thru report?
Thanks
Kannan.

Maaguiar,We have Analyzer 6.1.1 installed within WebSphere Unix running AIX 4.3.3 We have been told by Hyperion support that this is a bug. No confirmation has been made yet as to whether this will be fixed in version 6.2 which has a RMF date of late October

ERPI: how to set up drill through from Planning to EBS

Hi,
When you guys know how to set up drill through from Planning to EBS through ERPI ??
I encountered the following message when I tried to drill :
no drill through reports found at this location
I think I didn't set up the drill through functionality properly.
Regards,
Eddy

Can you check the log file for any errors? Also, check if the drill regions are created in the application. You can navigate to process details in ERPI and select the show log link for the corresponding process id. That should indicate if the drill regions were created on the target.
Thanks,
Bala

SQL Drill Thru (v502p13a) and Excel Client(V6.1.5): Formatting Sucks

Sorry about the last note, caffeine got me a little jumpy!I got the SQL Drill through working rather well. Fast, efficient, and the users like it. (I guess I keep my job for another week or so). Anyway, the format of the returned data is brutal. It is text, and nothing can be done in Excel to change the format. The field's datatype is decimal (15,2) and the data is number formatted from the high priced ERP system. So, of course, it makes no sense to me.Any workarounds out there? One thought. The SQL Drill Thru has a section where you can add a pre or post connection .dll. Maybe something there with formatting capabilities would resolve. We do NOT utilize Hyperion Intergration Server.Any suggestions would be appeciated. [email protected]

I don't recall if it was an option in the Essbase 5 client, but if you could create a VBA macro to invoke the SQL Drill through rather than using the Add-In menu, then you could build some macros to clean up the format a little.Other than that, I'm not sure what (easy) solution there would be.Regards,Jade------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

FDM Drill thru to Planning

Similar Messages

Maybe you are looking for