FDM mapping in ERP Integrator

Hi, all of you
I'm now thinking of the way to connect Oracle EBS 12.1.1 and Oracle Hyperion Financial Management, Fusion Edition 11.1.1.3.0 with ERP Integrator.
In the introduction section in ERPI admin guide, ERPI is mentioned as a module of FDM.
However, as far as I read the later sections in the guide, FDM is needed only if the user wants to use "FDM mapping."
Is my understanding correct, and EBS and HFM is connected only with ERPI (without FDM)?
And, if you know the advantage of using FDM mapping (I couldn't understand, actually), please tell me.
Thanks in advance
Yoshiki

FDM is not required.
The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

Similar Messages

FDM and ERP Integrator Module

I am trying to select the correct ledger from the Oracle E-Business Suite. Within the ERP Integrator area in EPMA, I am trying to select the ledger, when I select the entity for integration.
Select Source Accounting Entity for Integration screen returns no rows.
Any advice?
I was thinking it has to do something with ODI and specifying which Oracle E-Business Suite segments/books to pull data from. Has anyone seen a setting for a Oracle EBS segment/book in the topology manager?
Edited by: user8702914 on Oct 22, 2009 10:39 AM

Hello,
FDM is supported to Oracle RAC but not the ERP Integrator. If you see the 11.1.1.3 support matrix oracle has updated on the last tab telling that FDM will support. ERP Integrator is a new product and it was never designed or tested to be on Oracle RAC. This is what the information we got from the Oracle support when we were doing our in house testing for 11.1.1.3
Thanks

ERP INTEGRATOR and FDM

Hi All
We have new requirement our Source is PeopleSoft from that we want to load data to essbase and planning using ERP Integrator
Previously we use to get text files from Peoplesoft and we use to load it FDM to Planing & Essbase
What are prerequisites to connect to Peoplesoft -> ERP Integrator -> FDM
Do we require ODI to connect to Peoplesoft ?
Can anyone explain me the flow
Thanks,

Hi Tom
We are using
1. Hyperion 11.1.2.2 Essbase ,Planning and FDM
2.ODI 11g
3.Now we want to Connect to Peoplesoft using ODI -> ERPi -> FDM ->Essbase and Planning
One is connecting ERPi & FDM through the use of the appropriate adapter, and additional metadata information.
If possible can u explain the above clearly
Thanks

ERP integrator Metadata Mapping

Hi All,
We are trying to load metadata from our EBS Fund, Project, Location and Object segments to four different dimensions in to the planning application.
1. When we try to setup the metadata mapping, using ERPIntegrator, we are unable to map it to the desired parent member in the planning dimension.
2. ERP integrator does not load the metadata hierarchy, its loading either all the leaf members to one parent member, or each summary level member at gen 2 and then all its children at gen3.
Are we missing any key step, where we are unable to replicate the hierarchy in the planning dimensions.

Hi Rajiv,
Thanks for the reply. sorry we call the ECC DEV as ESR in our environment. Sorry for the confusion. I figured out the solution. I did the config changes in the web shop. We have the text setting in there.
Thanks,
Karuna.

ERP integrator target applications greyed out

Hi all,
I'm configuring the ERP integrator within EMPA (to use with FDM later) but when registering target applications three of the four are greyed out.
I have tried to delete and refresh them, re-deploy and so on but they stay greyed out.
Can anyone tell me how to re-activate the target applications so i can select them again?
Thanks,
Marc

Hi All,
Did any of you had success in configuring FDM with ERPI. I am trying to configure FDM+ERPI for extracting data from Oracle Financials R12 and load it into an EPMA Planning application. When i go onto create a Metadata Rule and click on the Add Dimension button, the next page gives an error stating: There are no more dimensions remaining to be mapped under this application. and the dimension drop down in the target application area remains empty. Any idea why this happens? My Hyperion version is 11.1.1.3. I also downloaded and applied latest available patch of ERPI but no results.
Thanks & Regards,
Muhammad Jamshaid Nawaz

Target registration in ERP Integrator in the Workspace

Hi,
I'm trying to integrate HFM 11.1.1.3 with E-Business suite R12 using ERP Integrator. Actually, I want to load journal entries from EBS in HFM.
I've successfully registered the source (EBS) and I filled all the ODI details, but I can't register the target (HFM) as the "Target Application" field is empty although I've created application in hfm and in workspace.
I'd appreciate any help.
Thanks in advance.
Ahmed.

FDM is not required.
The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

ERP Integrator Source Informations

Hi All,
I would like to know whether ERP Integrator will support the External feed file(from any other source system) to Hyperion Applications. ERP Integrator will support all ORACLE ERP & HR Modules, but in terms of external system likes Customized ERPs it will support or not. I understood from the below content, it will support the external system through Open Interface Adapter. I couldn't find any document on Open Interface Adapter.
Anyone having the experience on the above scenario, Please share your experience and let me know is there related document or URL..
I got the below content from the Oracle documents:
ERP Integrator supports general ledger data for:
Oracle E-Business Suite 11i
Oracle E-Business Suite 12
Oracle Fusion Financials
PeopleSoft Enterprise Financial Management 9.0
PeopleSoft Enterprise Financial Management 9.1
PeopleSoft Commitment Control
SAP ERP Financial
JD Edwards General Ledger system
ERP Integrator supports human resource data for:
PeopleSoft Human Capital Management 9.0
Integration includes data load and drill through. The integration is supported for the following SAP ERP Financial modules:
General Ledger
Profit Center
Cost Center
In addition ERP Integrator provides support for Open Interface Adapter. The Open Interface Adapter allows you to import data from any source system using the interface table.
Thanks,
PC

Hi All,
Got the Answer, The ERP Integrator will support external feeds files through FDM as well as they introduce Open Interface Adapter for flat files in new version(11.1.2.2). Please refer FDM ERP I read me document for more details. Currently i dont have any information for Open Interface Adapter. I will let you post the same once i got the reference materials.
Thank you for all your support.... :)
Thanks,
PC

Loading Alias from EBS to planning through erp integrator

Hi all,
Can anybody tell me how to load the member properties from EBS to Hyperion Planning using ERP integrator. My trial only loaded the members with few default properties.
My planning application is classic. And i used mapping type as "single segment". Didnt find any detailed options there to define the member properties.
Thanks

Hello,
I do not believe storage type is available.
The Alias is based on the languages you have defined when you setup your applications inside of ERPi. Not all "aliases" will come over; and only the basic information is actually stored as a description. I would suggest you review the ERPi Admin guide for your release.
Please review the documentation completely and ensure you understand it. The most current documentation can be found at the following URL.
http://download.oracle.com/docs/cd/E17236_01/epm.1112/erpi_admin.pdf
Information retrieved from the source can be found on Page 31.
Information about aliases can be found on Page 34.
Thank you,

Internal assignment table that maps the ERP & CRM Partner ID's

Hello Experts,
In CRM-ISU integration,
If we are maintaining different number range, in which table its maintaining the details of both Business PartnerID's
or how they link each other?
In one document i read this statement.
"There is always an internal assignment table that maps the ERP business partner ID to the corresponding CRM business partner to ensure a consistent data exchange."
thanks in advance,
Sreejith

HI,
In CRM there is a table BUT0ID which stores the ERP business partner ID as ID Number against CRM business partners.
Pass the CRM BP in the Business partner field to get the ERP BP number in the ID number field.
Regards,
PP

ESO/ERP Integration for Service Items?

Hello experts,
In an ESO/ERP integrated system, can data from Service master in the ERP also be used to create RFQ's and Auctions in ESO?
Are there any special considerations for Service Items in such an integrated environment or would they be treated as regular material master items inside ESO?
Thanks & Regards,
Reshma

Hi Reshma
You are right, currently Item type D is nto supported for the ERP - ESO implementation for Document types RFQ, PR, PO that are created from the MSA or the RFx award from SAP ES.
However, you can still try to create the interface using some Z programs if you are pushed to the limit
What you can do?
1) Copy the Program for the BBP_ESI package model it to suit methods that call the Service line into the PR with Item category D - if you are successful here, you can check with the available list of API's on the ES side to check where in the XML extract you can actually incorporate the Service lines
2) Create a Proxy using the existing interface delivered for RFQ or PR from ECC to SAP ES RFx, in PI you can define the Service line logic so that the Payloads in PI can enable this transfer
3) The XML that is generated for this interface must be in Sync with what all RFx expects to process it as a service line, since there is no classification on the SAP ES side for addressing service lines separately.
4) You can also extend the XPRess functionality, since SAP ES views Service and print requests service lines, see if you can somehow integrate creation of an XPress draft from a Service PR in ECC, that too should be possible.
5) If all approaches fail, its better to integrate the SRM SoCo to push the Service lines into SAP ES RFx draft, below would be the approach.
u2022 Requirements from SRM, SAP R/3 or SAP ECC to SRM Sourcing cockpit
u2022 Create Bid invitation in SRM : Draft status
u2022 All SRM Bid Invitations to populate in a new screen developed, this screen will have all bid invitations lined up with a check box next to them, the Bid Invitation can be selected and pushed to SAP E-Sourcing
u2022 Proxy created to extract these fields from SRM and put it in XI outbound
u2022MAP / Cross MAP the data structures and pass the data
u2022 Push the Bid Invitation into SAP E-Sourcing as RFx Draft
u2022 Once the Bid Invitation is pushed into the SAP ESO application, it cannot be modified in SRM
Hope this gives you some fair approach

Error When Clicked on ERP Integrator Menu In shared service

When Cliked on Administratio --> shared servcie console. A new window is opened where I can find one tree strucuture.
1)User Directory and 2)Application Group. when i expand Application group node it displays tree structure. From the tree structure If i select FDM -- > Erp integrator menu I get error "Required application context aif is not available. Please contact your administrator".
I have gone through many articles but no solution for the bug.
Thanks In Advance. :)

Hi Anand,
"Action Failed" error for "Exisitng Roles/Groups" comes up when Support Pack level of frontend(JAVA) and backend(ABAP) RTA are not synchronized. It happens mostly with HR RTA.
Please follow the SAP Note below to make sure your SP's are in Sync.
Note 1352498 - Support Pack Numbering - GRC Access Control
Best Regards,
Sirish Gullapalli.

ERP Integrator

Hi all,
We have requirement to load data from oracle GL to Hyperion planning by using ERP integrator and ODI.
We configured the source system in ERP integrator and ODI.
When we try to Intialize the source system in ERP integrator,we are getting error in ODI operator "Table or View does not exists"
Thanks

Hi Murali,
1. I have faced this issue recently ,and the solution is very simple .Go to your browser -> internet settings -> language settings -> add english US here .
2. Restart the ERP services, and check after logging into workspace , if you still have $
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

SCADA - XMII - ERP integrations through SAP PI

Hi Experts,
I have an integration scenario comprising of a SCADA system & SAP ECC. Could anybody suggest some document / send reference links on SCADA - XMII - ERP integrations through SAP PI.
Useful response would be appreciated.
Regards,
Santhosh

SCADA-XMII integration
Scada system should always remain connected to some Historian system. You can directly connect to SCADA system to xMII using vendor specific UDS (Universal Data Servers) Like Citect UDS ...
If vendor specific UDS is not available in MII then you can make it possible if the SCADA system is OPC complaint, through OPC UDS DA, but it provides only current data without any mata data information.
As a robust business practice it is not recommended to use direct SCADA connectivity to xMII, it should go through some Historian( Citect, Wonderware, Siemens...many more) so XMII will be able to get all plant floor operations data in history & current modes.
XMII-ERP Integration
XMII supports IDOC & BAPI communication with ERP system using various SAP connectors available in XMII as in SAP BC, SAP JCO.
Specific to PI Sheet, you can download various control receipe, process orders data using IDocs.
BAPIs can be used to do "process order confirmations" back to ERP system and make changes in process data.
Let me know if you would like to know about specific SCADA system- xMII connectivity or specific activity in PI.
Thanks
Ram Upadhyay

FDM Mapping tables within EPMA

Hi All
Can anybody tell me wether EPMA can hold the FDM mapping tables?
Also should we create a new member within the EPMA library can we set up a prompt that requests the user to update the mapping table with the new member?
Thanks

Hi
Thanks for the reply
Do you know if Kalido will be able to hold an FDM mapping table and wether this could feed into FDM?
Thanks again

FDM Mapping SPLIT/TRIM/JOIN fields

Hi All
I am using FDM to Transform a flat file to a new data file. I am a newbie in FDM.
Can anybody tell me the syntax for trimming/splitting the source field in to the target file in FDM mapping.
For Example:
In my source, the feild 'Product' has string "uranium FGIM (10010)
But on the target file, I need only the product code '10010' How do i trim this feild to get the desired output file.
Kindly let me know the syntax of the mapping.
Thank you,
JK

You can either do this as part of the mapping process or you can use an import script to parse out the desired value during the import.
If you do it in the mapping simply use your original full product string as the source and set the trimmed value as the target i.e. using explicit maps
In the import script use logic similar to your example to parse out the portion of the original product string you wish to pass as the source value. However you must ensure this logic is generic and will work consistently over all product strings.
From your criteria I imagine the mapping approach would be the simplest and easiest to manage solution

FDM mapping in ERP Integrator

Similar Messages

Maybe you are looking for