FDQM and ERPI

Hi,
I need to install EPM 11.1.2.2 that includes FDQM and ERPi.
Can FDQM and ERPi web app be installed on two different windows based server? or do they have to be on the same server.?
It will be convenient to have them on the same server but I have a distributed environment.
Foundation services and weblogic is on the server where I have ERpi webapp. Correct me if I 'm wrong but this way Erpi can use weblogic and can be access from workspace.
Just wondering if I can install FDQM on another server where ODI is installed. Will FDQM will be able to communicate with Erpi if I do this?
Thank you!!

Hi,
One more question please.
So can ERPi be on a different server than Foundation and weblogic.
To simplify, I want to have FDQM+ERPi +ODI on server.
Weblogic + Foundation + Planning +all other web applications on another server.
In this case will I be able to deploy ERPi on the same weblogic (used for other web applications) and access ERPi from Workspace.
Thanks for your help.

Similar Messages

Hyperion FDQM AND ODI

I DID SEARCH A LOT i just want to know when to use odi with fdqm and when to just use fdqm alone and why ? and can i configure source adapter into fdqm and how ? and does fdqm support importing flat files as source and if yes what its adapter ? i would appreciate if any one help me on that i searched a lot but looks like fdqm informations few on the net

Hi ,
I could see the excruciating pain ,which you have been undergoing. Let me try to address few of the question ( out of many).
1. ODI and FDQM , ODI can be assumed as a traditional ETL tool ( infact it is ELT), whereas FDQM is not, its more to do to uphold the sanctity of financial data. FOr more ODI information, John's blog is the best resource undoubtedly.
2. "Just using FDQm", let me expalin this way - there is an HFM application and data needs to be loaded from 3 different georgraphies of their respective TB's ( Trial balances). These 3 different geographies have 3 different formats of TB's but nevertheless it needs to go into one single HFM application. Then , you would use FDQM to load the data into HFM application. This also answers your question that yes, flat files can be loaded . In our case, TB's might be in flat files as well.
3. Adapters, if we intent to load data into Planning applicatino, we have seperate adapters, if we intent to load into HFM, then we have HFM adapters available. You can find this information in the 'readme ' docs of FDM
4. As said earlier, FDM is not an ETL, its responsibility is to check the quality of financial data. Hence, the name ' Financial Data qualtiy management'. Now, the typical scenario in many of the implementations is that data if loaded directly from Oracle Apps or EBS ( in short ERP systems) into Hyperion applications. IN this case, we use FDM along with adapter called ERPi.
Now, if a finanial analyst looks at a number in one of the HFM data forms and realises that it cannot be true and doubts the quality of this financial data. Then, he can drill back from the very data form to the source EBS system with the help of FDM. This is one of the major advantages.
HOpe I have answered few of the questions.
Sandeep Reddy Enti
http://hyperionconsultancy.com/

Data duplicated between Oracle GL and ERPI

Hi
We are using ERPI to load data from Oracle eBS to Hyperion Planning. (version 11.1.2.1)
Rows are duplicated between Oracle eBS GL (table GL_BALANCES) and ERPI (table TDATASEG).
Thanks in advance for your help
Fanny

If the ODI process is being started multiple times by FDM you need to update the iisproxy ini file with the following 2 lines:
HungServerRecoverSecs=3600
WLIOTimeoutSecs=3600
You may have multiple copies of the ini file on the server so do a search and update them all.

Hyperion FDM and ERPi 11.1.2.2: ORA-12504 on Import with ERPI-FIN-E

Hi everyone,
We are implementing Hyperion 11.1.2.2 FDM with HFM (Target Adapter = FM11X-G6-A) and ERPi (Source Adapter = ERPI-FIN-E) running on ODI 11.1.1.6. Backend databases are all Oracle DBs. We have been able to successfully configure ERPi and ODI & successfully run a Data Load Rule with all green checks in ODI Operator. We have also successfully tested the full FDM workflow with load to HFM using the traditional flat file method.
We have also setup an FDM Location and Import Format (File Type = Adapter; Adapter = ERPI-FIN-E) for use with the ERPI Source Adapter. When kicking off an Import either manually via FDM Web or via Batch Loader, we are getting a grey fish, Information Bar with "Error: Import failed. Invalid Data or Empty content", and pop-up error dialog displaying "ORA-12504: TNS: Listener was not given the SERVICE_NAME in CONNECT_DATA.
While previous versions of ERPi Source Adapter have the "ERPi Database Server/Service" option, ERPI-FIN-E does not have this option. Additionally, we have tested the TNSNames.ora files SID's with SQL Developer and SQL Plus and they all seem to be working.
Has the "ERPi Database Server/Service" option moved somewhere behind the scenes? Another options or DBLink that needs to be setup somewhere else? Any thoughts or assistance would help.
Thank you.
Contents of ERPI-FIN-E.log is below:
*** 1/22/2013 9:30:01 AM ***
LoggedInUser = +redacted+
Token = iZKY0Aj/AeTH9AV6F/k980xCFWDzrk5im3n2E0SnmNg6c/fNa/XjSfSU6+wemuIo3IQdzrUlhAj8
M9J9SJpU5TvCibwJZaUJOh3nlA83UlfKOHpUC7oPGOqhedu+XIPbMC022Ftcb4LexFa/M1R6Rw1h
4D7nbb0nLQv/viNdZyXzORrXzKD41ljWAnw/J/R84ZYt3yHyjxI2KBz6f7x9FKyfNnD5XJuR+50y
klV8tjlLY6EvfKyiv/ecSanQuWeA1p2D8MBIFUftHtqgnbABXOEyRll4kT9yaPUaClpvLDaD7knt
iBUSXU1fIOoKuHtrrD4XCvjMKcowWv/SnLIrbkn2HXotkKwqCulHx2is6yWnJfni96tZGvG8z4ds
WRgm7tsJRV12Tp5zeNLSxZTZoK/5AMCdN5MC6u88G59prlI=
ERPIdbConnString = Oracle://EPMD1.ges.+redacted+.com:1521/EPMD1
m_ERPIdbUserID = ERPI
ERPIdbPassword.Length = 6
*** 1/22/2013 9:30:17 AM ***
PeriodKey = 11/30/2012 12:00:00 AM
PriorPeriodKey = 10/31/2012 12:00:00 AM
Rule Name = DLR_1
Execution Mode = FULLREFRESH
executeRule...OK.
*** 1/22/2013 9:30:17 AM ***
System.Runtime.InteropServices.COMException (0x80040E14): ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
at ADODB.ConnectionClass.Execute(String CommandText, Object& RecordsAffected, Int32 Options)
at fdmErpiFin_E.clsDW.fTransferData(String strSQL, Int64& lngRecAffected)
-----------------------------------------------------------------------------

Below are the contents of the "E:\Oracle\product\11.2.0\client_32\network\admin" and "E:\Oracle\product\11.2.0\client_64\network\admin" folders on application server. EPMD1 = ERPi, HFMD1 = HFM, FDMD1 = FDM, EPMD5 = R12.
Since we are able to connect via SQL Developer and SQL Plus to EPMD1, I believe these settings are OK, but open to additional checks if suggested.
EPMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = EPMD1.ges.+redacted+.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = EPMD1.ges.+redacted+.com)
HFMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = HFMD1.ges.+redacted+.com)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HFMD1.ges.+redacted+.com)
FDMD1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = FDMD1.ges.+redacted+.com)(PORT = 1523))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FDMD1)
EPMD5 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = tus1ebsdbsdin11.ges.+redacted+.com)(PORT = 15212))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = EPMD5.ges.+redacted+.com)
)

Hyperion FDM and ERPi 11.1.2.2 Import failed with ERPI-FIN-E

Hi Experts
I am doing first time ERPI Configuration
We are implementing Hyperion 11.1.2.2 FDM with HFM (Target Adapter = FM11X-G6-A) and ERPi (Source Adapter = ERPI-FIN-E) running on ODI 11.1.1.6. Backend databases are all Oracle DBs. We have been able to successfully configure ERPi and ODI & successfully run a Data Load Rule with all green checks in ODI Operator. We have also successfully tested the full FDM workflow with load to HFM using the traditional flat file method.
We have also setup an FDM Location and Import Format (File Type = Adapter; Adapter = ERPI-FIN-E) for use with the ERPI Source Adapter. When kicking off an Import via FDM Web we are getting Error : ORA-00942: table or view does not exist ORA-02063: preceding line from FDMHYPERIONDEV.
Contents of ERPI-FIN-E.log is below:
*** 4/8/2013 12:02:32 PM ***
PeriodKey = 3/31/2012 12:00:00 AM
PriorPeriodKey = 2/29/2012 12:00:00 AM
Rule Name = EBS Data Load
Execution Mode = FULLREFRESH
executeRule...OK.
*** 4/8/2013 12:02:32 PM ***
System.Runtime.InteropServices.COMException (0x80040E37): ORA-00942: table or view does not exist
ORA-02063: preceding line from FDMHYPERIONDEV
at ADODB.ConnectionClass.Execute(String CommandText, Object& RecordsAffected, Int32 Options)
at fdmErpiFin_E.clsDW.fTransferData(String strSQL, Int64& lngRecAffected)
Thanks Advance.
Nagarjuna Reddy

Yes Data Rule Running Successfully from ERPi.
IF we Import From FDM Web Client ODI Scenarios Running successfully after that Showing Error Table or View Does Not Exist. and Log file like below
*** 4/9/2013 4:18:22 PM ***
LoggedInUser = hfmadmin
Token = Xhj55LFLJqZlNnyOriPyEVipmO3c2mvD/9R7b3XzWoNngYLhEnwVUqJLHuqaLGWRVYhfV/tXfZ
FahuBfK/ozpc1lDmtaLC7Ug6NO67MALvD/L5V7ELoYgYDTt6hplkXDEHn54fsAaX1pqwRgcufftF
bo0jBuiCjpj/K4UTTDvBu/oIy+wWbnj5IKXunkEEs8qEfeutvzvsQPLogwbPlc/u4uxQqwFmY0/e
e+fTkXgRxY17FMHTMaOwNytap8bg07wkDFjBQ8sMN63o5aRI56Y+NMT19V5u6r6eSplr+QzVYqLx
SpXscelv55j+CRHTA1NYa7gJ+U2ktrJB6RsvxQ==
ERPIdbConnString = Oracle://hyperiondev:1521/epmrapid
m_ERPIdbUserID = HYPEPMA
ERPIdbPassword.Length = 10
*** 4/9/2013 4:20:07 PM ***
PeriodKey = 3/31/2012 12:00:00 AM
PriorPeriodKey = 2/29/2012 12:00:00 AM
Rule Name = EBS Data Load
Execution Mode = FULLREFRESH
executeRule...OK.
*** 4/9/2013 4:20:08 PM ***
System.Runtime.InteropServices.COMException (0x80040E37): ORA-00942: table or view does not exist
at ADODB.ConnectionClass.Execute(String CommandText, Object& RecordsAffected, Int32 Options)
at fdmErpiFin_E.clsDW.fTransferData(String strSQL, Int64& lngRecAffected)
-----------------------------------------------------------------------------

FDQM and Essbase

Hi All,
My team is trying to load data into essbase cube but not able to succeed. I need information if FDQM is compatible with essbase cubes
Raja

Thanks Raja,
As per my knowledge goes, FDQM does not work with ASO Cube. Some one can pitch in and correct it . It works with BSO for sure.
Sandeep Reddy Enti
http://hyperionconsultancy.com/

FDQM and SAP Adapter

Hi all,
Is It possible to use FDQM SAP Adapter with following configurations of SAP on the Hyperion 11.1.2.1 version.
SAP Kernel: 18
SAP Basis: 05
SAP ABAP: 05
Kindly let me know if there is any documentation available for it.
Thanks and Regards,
Lakshmikanth..

I do not think that the SAP Kernel,SAP Basis and SAP ABAP mentioned in the SR is supported.
Please find the below information which is obtained from the senior Hyperion Specialists which is officially tested and supported.
SAP 4.6c system:
     Kernel: 2415
     Basis: 53
     ABAP: 53
SAP 4.7 system:
     Kernel: 80
Basis: 61
     ABAP: 61
SAP ECC 6.0 system:
     Kernel: 75
     Basis: 09
     ABAP: 09
Hope this helps.
Thanks and Regards,
Dark..

FDQM and FDM

Hi all,
Can you tell me the difference between FDM and FDQM?
Thanking you.

There is not FDQM. The acronym for Fiancial Data Quality Management is FDM.
Sometimes people throw the Q in there, but for all product/marketing purposes it is FDM

FDQM and MS office

Hi,
Does FDQM requires a 32 bit MS office 2010. Or can it work with a 64 bit MS office as well?
Any pointers will be appreciated.
Thanks in Advance!!

It is only excel that is required for FDM not office, it used to be 32bit only but now I believe it can be 32 or 64.
Cheers
John
http://john-goodwin.blogspot.com/

FDQM installation

Hi,
Is there any step by step guide for FDQM and ERPi (adapter) install.
I was reading through EPM installation n configuration guide and was surprised to see that "Oracle recommends to have a separate database instance for FDM".
Is this statement true.? Can't we just have a separate schema created for FDM on a database instance also being used for storing metadata for other EPM products?
Any pointers will be appreciated.
Thank you!!

Hi ,
Thanks for reply John.
Hopefully just one more question for you.
I am doing the install on following 3 servers-
serverA_Windows2008Server - Weblogic, Planning, Shared services,EAS,APS, Calc Manager
serverB_Windows2008Server - FDQM, ODI
serverC_Solaris - Essbase
According to your post earlier ERPi is a web application. Does that mean ERPi can exist on a machine other than ODI (say server A)?
How will it interact with ODI in that case?
Also FDQM consists of following components -
FDM
--FDM Server
--FDM Task Manager
--FDM Load BAlancer
--ERP Integrator
----ERPIntegrator WebApplication
--FDM Web Application
--FDM Workbench client
Is it ok to have FDM Web Application and ERPi Web Application on serverA and rest of the other FDM components on serverB ?
Correct me if I'm wrong, but if this is possible I can have just once instance of weblogic on serverA ?
Any pointers will be helpfull
Thanks in Advance!!

Extracting data from Oracle GL and importing to FDM using ERPI adapter

Hi,
I am also trying to use ERPI adapter to directly extract data from Oracle GL. I am not finding sufficient information on this. It would be great if anyone can help me in this.
I have one more doubt: Can we call the stored procedures in the FDM custom scripts, If so can I get the syntax of the script...I really don't have idea on this FDM part. I was working till now with the Flatfile input, But my client wants to make this change in the existing system. Accessing/Extracting data from Oracle GL. Experts who knows it can pls guide me.
I am using FDM 11.1.2 and ERPI associated with 11.1.2.
Thanks in Advance.
[email protected]

Hi,
Is it possible to execute the stored procedures in FDM. Currently we are extracting data from oracle GL using SQl procedures (constaller tool is user to create the inteface) and storing the required data in the intermediate table in oracle GL, From which we are extracting data into a flat file and then loading it to FDM.
So my question: is it possible to invoke the stored procedure from FDM scripts, If so can you pls let me know how to do that...
Thanks In Advance,
[email protected]

How to download Oracle EBS patch to import source file into FDQM

Hello Experts,
I am not able to find patches for importing source file from Oracle EBS into FDQM.Actually I have HFM,FDQM,ESSBASE,Planning,erp,epm,calculationManager in my virtual machine.I didn't Install Oracle EBS
Please tell me how to import source file from Oracle EBS like Flatfile from HFM into FDQM and share me what I need to install regarding EBS to Import and register the EBS adapters.It's urgent please share asap.
Thanks in advance.....

There are not any EBS Adapters for FDM.
If you are just importing a source file from EBS, you would need to setup an import format to parse the source file in FDm and then assign the import format to the location that will be used to load the target system and run the import process.
If you are looking to pull directly from EBS, you would need to use ERP Integrator (ERPi) to connect to oracle EBS and then use the ERPI adpater in FDM to pull the data from ERPI into FDM.
Can you be specific on what you are looking to do?

FDM compatibility and URL

Hi every one,
We have installed Hyperion Planning on Linux, i have read some where that FDQM is not supported on linux but only on windows. What are the possible solution that we can adopt to use FDQM with hyperion planning and essbase on LINUX.
I have two options in my mind.
1- Install it on window based machine.
2- Using Vmware on linux and install FDQM.
Plus the linux installer shows that FDM is installed on our system. Are FDQM and FDM are the same things?
Waiting for reply.
Regards.

FDM (which Oracle aer now calling FDM Classic) will not be available after the current V11.1.2.3 release. It is being replaced by FDMEE which uses ODI as the underlying engine, extending what was known as the ERPi part of the curent FDM. Wheter you consider FDMEE (so it can be installed on Linux) will be dependent on what version of Planning you have installed, and whether the current version of FDMEE has everything you need, as not all the current FDM functionalitiy is currenrly available. , .

FDM & ERPI to FDMEE - Upgrade approach/challenges ?

Hello,
We are in FDM/ERPI 11.1.2.2.300 (used for loading data from EBS and file systems into HFM 11.1.2.2.300) and planning to upgrade (within the existing environment [in-place upgrade]) to 11.1.2.3. As we see that FDM/ERPI are integrated together as FDMEE in 11.1.2.3, we had big grey area on how FDMEE would function in contrast to disparate FDM/ERPI.
We needed inputs from veterans or anyone who had experienced the upgrade to answer the follwing queries.
Queries:
[1] We have come to know that FDM and ERPI are integrated together as FDMEE in 11.1.2.3.
     [a] Since we have FDM and ERPI as separate components in 11.1.2.2.300, how should FDM and ERPI components be upgraded to FDMEE ? Any specific steps / approach that need to be followed ?
     [b] Are there any known issues / challenges involved in upgrading from disparate FDM & ERPI to FDMEE ?
     [c] How would ERPI artifacts (of 11.1.2.2.300) function in FDMEE - Are there any specific migration or any manual set-up required post-upgrade (to 11.1.2.3) to have ERPI artifacts (like source system, period mapping, location, import formats, data load mapping etc)      functioning in FDMEE ?
     [d] Similarly how would FDM artifacts (from 11.1.2.2.300) function in FDMEE ? Are there any specific migration or manual set-up required post-upgrade (to 11.1.2.3) to have FDM artifacts (like mapping, validation rules etc) functioning in FDMEE ?
[2] Since only ODI 11.1.1.7 is compatible with 11.1.2.3 (from Compatability matrix), how do we upgrade ODI from 11.1.1.6 to 11.1.1.7 ? Are there any patch available to upgrade or should we uninstall ODI 11.1.1.6 and install ODI 11.1.1.7 ?
Any insightful response will be helpful for us as it would help us to gain clarity/confidence and comfort in upgrading to 11.1.2.3.
Regards,
Sathish

hello Sathish
As you are upgrading from 11.1.2.2.300 to EPM 11.1.2.3 (within the existing environment [in-place upgrade]) , it's called Applying maintenance release EPM 11.1.2.3 on EPM 11.1.2.2
[a] when you apply maintenance release , FDM 11.1.2.2 gets upgraded to FDM 11.1.2.3 ,
     and ERPi gets upgraded to FDMEE 11.1.2.3
[b] i have not faced any issue while upgrading FDM
[c] please check epm_install.pdf for EPM 11.1.2.3 for upgradation task for FDM and FDMEE (see page 257 / 258)
regards,
-DM

How to use import script with FDM using adapter ERPI?

Hi,
I use FDM and ERPI 11.1.2 to load data from EBS R12 to Planning 11.1.2
Data loaded from eBS are YTD data.
I have seen that I could use an import script to calculate manually the amount with the periodic_net_cr and periodic_net_dr fields.
But how to use this import script? Because in my import format in FDM, I don't use a file but directly the adapter, so no "Expression" field.
Thanks in advance for your help
Fanny

Hello Fanny,
No you will not need to put anything in the BatchAction. If you review the FDM API Documentation posted it will outline all the scripts that will execute for a particular event ... and the order in which they execute. The BatchAciton only affects the execution of the batch ... it does not control processing of data. Processing of data is controlled by many others.
There is a script that can be written and placed (as Tony mentioned) in the ImportAction that will be able to recaculate the values from ERPi to be YTD values. You can possibly open an SR and a support Engineer can help you .... or you can search the current KM base and use that information there from the v11.1.1.3.00 version to build your own for v11.1.2.x
Thank you,

FDQM and ERPI

Similar Messages

Maybe you are looking for