Fear and Loathing in 9.0.2.25 Backup Land
After resisting the urge to take a bat to my case, I did some forum browsing and discovered that I made a serious error in judgement by assuming iTunes "backup library to disc" function worked. Short'n long of it, I made it through 13 out of 22 dvd's before the 14th one just would not burn. It just sits there flickering back and forth between "burning disc.... initializing" & "please insert blank disc". The 13 that burned are all good, (checked all on 3 different machines, and all restore fine)and the burner seems fine. It burns like a champ using other programs like Nero. Heck, even in iTunes it will burn a data dvd from a playlist, but it flat out refuses to complete the backup I started. I've rebooted, tried 3 different types of media, found the exact song that is next in the backup sequence and burned it along with the next 30 songs from a playlist and it worked fine. (thought it might be a bad file). If anyone has any suggestions besides the standard: "Start the backup over fresh", "Dont use iTunes for burning you fool" or "Buy an external HD", I'd sure appreciate it. Furthermore I swear to never again do something so foolish as to use iTunes for anything other than it's main purpose... a shiney jukebox.
Also, I've already installed SyncToy 2.1 and will use it from now on, just would love to get those other 9 discs burned to match the stack I've already burned... O.C.D. is a terrible thing.
Thanks in advance
(For the record I had a friend buy him a big ole fancy WD external drive last year and transfer his library over to it... and three months later after it completely failed he was re-ripping 18K songs. DVD's dont fail, I kinda dig that about em)
Yep, I dont trust it either. But after all the hours I spent fixing all the sorting, grouping, etc data I got lazy and figured an iTunes backup would for sure nab all that meta data for me and I wouldnt have to spend hours reseaching an alternative method that I could be certain would. I deserve this.
I need to clarify some... the 13th disc burned clean and ejected. The next disc when inserted would not begin to burn. I went back and spun up the 13th disc and all the songs are there and will play. The last song on that disc is the 2nd track of an album, I deleted that entire album from the library and attempted to resume the backup, and it does the same thing. The status bar bounces back and forth between the "burn initializing" and "please insert a blank disc" messages. You can cancel the burn and the disc is still a good blank, the attempt doesnt corrupt it at all. So we have a 13th disc that is 100% A-OK and a no go on the next disc. Not really a hang situation, more like a never started to begin with.
Similar Messages
-
Will Apple let 10.8 languish? Fear and Loathing...
I am having the worst time with this new late 2012 mac mini.
Don't get me wrong, the thing is fantastic when it works but
It is experiencing quite challenging issues:
Hangs on boot randomly - grey screen and spinning beach ball of death
Hangs when attemptng to wake from sleep, randomly - no dialog box to enter password
Hangs on shutdown - randomly
Randomly loses overscan settings to the monitor so that menu and dock are off the screen.
System Prefences randomly hangs...
Connecting to it with iTeleport, Mac OS selects and deletes text randomly as I attempt to enter my password.
Read all the discussions on these and other problems with 10.8 and I am deathly afraid to upgrade to 10.9.
I no longer use my apple wireless keyboard or mouse, using Apple USB keyboard instead, no difference...
Unplugged all other periperhals - no difference...
Rebuilt, fixed, zapped, shifted, optioned, commanded, restarted, restored, reset, run from both a different HD and SSD with fresh 10.8, reinstalled 10.8 and did every other form of voodoo - everything as per apple, works sometimes for a day or two, sometimes not...
With all the issues with 10.9, I am afraid to upgrade to a whole new circle of hades...
I would love to be able to back up to 10.6 like I have on my old macmini, but that wont work...boy that mini is rock solid, albeit slower...
So, I have the new mini plugged into a ups so it wont lose power, I have turned off screen saver, won't let it sleep, won't log out of my account, wont shutdown and just let it run full blast and let the power meter spin...
I have loved Macs since 1984 and this is the first time I am feeling sad about a Mac purchase.
So, do you think Apple will update 10.8 or are they just going to focus on 10.9 and make me "upgrade"?If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the suggestion of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only run the test in safe mode, proceed anyway.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ "$a" -eq 0 ]]; }; R () { o=; [[ "$r" -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=$(sed 's/^ */ /' <<< "$o") && printf "$Fm" "$1" "$o"; }; Pc () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); Pm "$1"; }; Pp () { o=$($PB "$2" | awk -F'= ' \/$3'/{print $2}'); Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); [[ "$o" =~ Pass ]] || Pm "POST"; o=$(pmset -g therm | sed 's/^.*CP/CP/'); grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=$(pmset -g sysload | grep -v :); grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=$(nvram boot-args | awk '{$1=""; print}'); Ps "boot-args"; o=$(ls /L*/L*/Dia*/*.panic | wc -l); Ps "Panics"; o=$(ls /L*/L*/Dia*/*.c* | tail); Pm "System crash logs"; o=$(ls L*/L*/Dia* | tail); Pm "User crash logs"; o=$(syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'); Pm "Kernel messages"; o=$(df -m / | awk 'NR==2 {print $4}'); [[ $o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$(printf "$Fu" ${s[1]} ${s[3]}) || o=; Pm "Total CPU usage" && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); Pm "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); Pm "Loaded extrinsic kernel extensions"; R && o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); Pm "Loaded extrinsic daemons"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); Pm "Loaded extrinsic user agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=$(ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'); Pm "$d"; done; o=$(find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done); Pm "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); Pm "Unsigned shared libraries"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); Pm "Inserted libraries"; o=$(find {,/u*/lo*}/e*/periodic -type f -mtime -10d); Pm "Modified periodic scripts"; o=$(scutil --proxy | grep Prox); Pm "Proxies"; o=$(scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'); Ps "DNS"; R && o=$(sudo profiles -P | grep :); Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(sed '1,10d' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=$(sudo defaults read com.apple.loginwindow LoginHook); Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); Ps "Restricted user files"; cd; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); Ps "Font problems"; o=$(find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print); Pm "Bad plists"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the script will run anyway, but it will produce less information. In most cases, the difference is not important, so don't worry about it.
If you're not logged in as an administrator, you won't be prompted for your password. The script will still run. It just won't do anything that requires administrator rights.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again. Please don't copy anything from the Terminal window.
If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.
When you post the output, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the output on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the output of the script. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?
Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks... -
Windows 8.1 and iTunes 11.1.4.62 iPhone Backup Lost
I synced my iPhone 4 yesterday, then reset it to factory settings. I have done this several times, and everytime I am able to restore my iPhone from backup. However, that was on Windows 7 and earlier iTunes versions. This time, with Windows 8.1 and iTunes 11.1.4.62, I wasn't able to restore from backup. It does not show my phone's name when I click Restore Backup, and I can't find the previous backup anywhere on my hard drive. Please help!
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
My ipod went to the ''connect to itunes mode'' and i want to use my itunes backup but how can i do that. also when the ''recover your ipod screen'' appeared i accidentally chose not to show it anymore. please help i just had it for half a day.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard. -
I made the mistake of installing OS 10.9 on my older MacBook Air and the machine has become horribly slow and unpredictable. I visited the Apple store and questioned a 'Genius' about getting rid of 10.9 and reinstalling the previous OS 10.6 for which I have the disks. He advised that I should reformat the Air, reinstall 10.6 and then restore from the Time Machine backup that I have.
He explained that of course, after I reinsatll 10.6, I couldn't import the iPhoto Library from the backup drive complete because it had been recreated using the OS 10.9 and wouldn't work with 10.6. I would have to create a new 10.6 iPhoto Library and move the actual ORIGINALS, from the backup into it. He actually had the path to the iPhoto library shown on my Air to the point of >Pictures >iPhoto Library > ORIGINALS.
I didn't question how he got the path to the point of > ORIGINALS and figured that it wouldn't take too much to do what he suggested. Now I can't find how to get to point of seeing the ORIGINALS in the path. When I go through the path >Pictures >iPhoto Library, the next column shows me the iPhoto Library icon and the info re size, creation date etc.
Can anyone advise how to get to the 'ORIGINALS' in order to import them and does anyone have any further suggestions that might help in completing this procedure ?
Thanks, in advance, for any assistance available.
p.s. is there any way of looking at a Time Machine backup and finding what O.S. was present when the backup was produced ?Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed. -
I pressed 'X' during a backup after it froze during an update to software 4.3.5 and now it won't let me backup on my computer. Does anyone have any ideas? It either freezes during backup or says my 'backup is corrupted' or 'I cannot backup on my computer'. I have had to abort quite a few attempted backups since the initial problem, which I think has made it worse. I have already tried restoring my ipod, deleting the aborted backup from my preferences/devices in itunes and deleting it from my user/appdata/etc on my PC hard drive. Any ideas what to try next?
After hours of frustration I eventually decided to restore. I lost my apps, but i didn't have many and was able to reinstall them for free. During the restore it updated my ipod to the latest software 4.3.5, which i think may have caused the initial problem, but the backup issue remains. Sometimes it stops me from syncing and other times it allows me to skip the backup, but still says that i can't backup on my computer. I'm worried that it has done something to my computer as it took me six hours to do a Bullguard scan, which only normally takes about an hour. The scan didn't come up with any viruses, but it stalled at system32 for ages. The only other thing that i can think of is that a demo CD I uploaded may have caused a problem. iTunes couldn't find a track listing for it but gave me a few different options. i thought I had to choose one to continue, so did that then changed the track details to the correct tracks. I'm now worried that may have introduced an issue or caused a glitch in iTunes. How paranoid am I sounding?
-
I had made a copy of the main revel file on my mac, and then i put it in my google drive folder for safety. I accidentally deleted one of the two libraries form my iPhone. I opened it up and panicked and thankfully I guess I had a backup of the other library in my spouses phone... but mine is still gone. I don't have them saved to my computer... the pictures are important and I really really need them back. Is there a way for me to get the pictures back from what I believed at the time was a smart way to backup when i made a duplicate of that main mac file to my google drive? The best way to let me know is my email... [email protected] I am really relying on you guys if there is a way?
Hi meghage,
From your code, it is a WebForm project.
This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
You can consider posting it in asp.net forum for supports . Thanks.
ASP.NET: http://forums.asp.net
Regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?
If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads -
I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.
Also, does reinstallation takes the back up automatically or the files will be lost. Please help.Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯ -
I just got a 5s and had taken some pictures. Then I plugged it into my PC and set it up using my previous backup from my iPhone 4. Now the pictures I had taken are gone, is there any way to get them back?!
Sorry no as you wipe the current data when you restore from your backup.
-
I forgot the passcode to turn off restrictions. I have restored my iPad back to the factory settings and then synced it with the latest backup. The restrictions are still on and it is asking for the passcode. Can someone tell me how to get that off.
The only option is to wipe the device clean and restore it to factory settings. Hope you have a backup.
Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
Cheers, Tom -
My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help.
Maybe you are looking for
-
whenever i go to activate my copy of photoshop, an error message pops up. "An error has occured while trying to begin activation. Please make sure you have administrator priveleges and try again. If you continue to experience this problem, try reinst
-
Can I do a sampling with a rate of 96000hertz using a sound card?
I have a question about sound card.I supposed to collect signal using a sound card which says supporting a sampling rate of 96000 hertz.But VIs about sound card in Labview can only do sampling with a maximum rate of 44100 hertz.I try to modify the VI
-
Hello Everyone, I got an iMac G4 for free, wiped the HD and put 10.2.3 on it. But now when I start it up, it will be normal sounds and fan goes on, but it gets to the gray screen and Apple logo, and... Nothing. It won't load. I have tried putting in
-
Web app tag is causing a scripting break
Okay, here is the proper script: if (iTotal > 6){ $('#CalcTotal').html('<strong>' + iTotal + '</strong>,<div id="choice"> {module_webapps,15515,i,4011348,,,true,10,,1}</div>'); When it renders in the
-
Maximum number of contacts for Symbian phone
Hi, Anyone knows what is the maximum number of contacts one can store for their Symbian phone? For example, I am using N95 8GB. I loaded in 5000 numbers and I have nothing else in the phone. When I try to access to the phone book, phone prompts me "M