Fear: Oddly base sound when putting on slow motion. (single play

Hmmm, i get this ugly base sound, when im turning on slow motion, and also when i/it turns off. The game runs great, exept for this.
Is someone else getting this? (I know how it should sound, cause i had good song before the new .07Patch, but this was bad.)
And if someone else gets this, i wanna know if creative got a soloving of this :smileyvery-happy: hehe
And if someone wants to know, i got an..
Amd athlon 64 3400+ (old socket, 754)
Epox EP-8NPA sli
ATi Radeon X-800XT (256mb)
PC3200 536mb
Creative X-Fi Extreme Music
(Windows XP Pro. x64)

I finally found a workable but temporary fix. This keeps the distortions away until you restart the game, even if you quickload or start a new level. I'm not sure why or even how it works, but it works. I've been playing FEAR:EP for about 4-5 hours now, distortion free. In fact I just beat the expansion pack (I played about 5 levels) with no problems. It's kinda tricky how to do it, I'll try to explain it as best as I can.
Load a level. Got distortions? Go into the sound options and turn off all the hardware sound options (hardware, EAX, advanced HD). Go back into the game and play around some (endure the distorions, please), until the distortions seem to magically go away (getting into some combat and jumping or using a lot of slow-mo helps). We're not done yet! Now that the distortions seem to have gone away, immediately go back into the options and turn all the hardware sound options back on. Don't quickload, change levels, restart the game or continue the game without turning hardware sounds back on. The distortions WILL return. Now, the distortions should be gone until you restart the game. You may have to try it a few times if the distortions don't go away in software sounds. But if you can make the distortions go away in software, then immediately turn on hardware, they go away altogether for this session.
Good luck!

Similar Messages

  • What causes my sound to go into slow motion when I am playing itunes and then disconnect the power adapter on my laptop?

    When the sound goes into slow motion, the only way to resolve this is to perform a Windows restore.
    But there must be a way to keep this from happening.
    I'm using Windows XP Home Edition Version 2002 service pack 3 and iTunes 10.5.2.11.
    Not only are the songs in iTunes playing slow, but so are all sounds, including Windows sounds.

    That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
    Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
    Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
    Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

  • Imported Video not in sync with sound. Video in slow motion...

    Hello,
    I am fairly new to Premiere and I wanted to spend some time playing around with it. When I import my videos, the playback is out of sync. The sound is normal but the video is in slow motion so it doesnt sync together. Am I missing something? Using Premiere Pro CS4 and filmed it on a Sony Xacti with MPEG4 AVC sequence.
    Thanks in advance.
    Steve
    Oh by the way, it seems to open and play just fine in any other media player

    Steve,
    Glad that you got some material to practice with. That was your goal here.
    Now, file conversions from compressed source material will usually not yield great quality. Unfortunately, the conversion process, unlike what some would love to believe, does not restore quality to the compressed material. It only changes some of the characteristics, but imporved quality is not one of them. Also, depending on the actual conversion program used, the quality can suffer even more. This is a fact of life in Video.
    Now, when you go to get your camera, there are many great threads on many camera makes and models already posted. If you cannot find info on your considerations, post to get recommendations, based on your budget and what you wish to use the camera for. I'm not positive, but I think that the new Equipment sub-forum would be a good place to ask. Previous posts will not be there yet, but will be in the general forum. Many, but obviously not all, cameras have been discussed in length, and their pluses and minuses have been debated.
    Good luck,
    Hunt

  • Does the duration of the video change after putting a slow motion effect?

    Hi, I'm new with this After Effect software, and through researches and youtube videos, i learned how to make a slow motion clip, but i found a problem just after i was so happy to learn something new. Because I was so excited to try it out, i took a quick 3secs clip and edited it, after all the successful application of the slow motions, the clip suddenly stop without finishing the whole video, the duration of the clip remains 3 seconds after i applied the slow motion, i was hoping that the duration would go over 3 seconds because the slow motioned part was only at 5% the original speed.
    So my question is, is the duration really supposed to stay the same after the slow motion is applied or should it expand finishing the whole video.? Then what should I do if the duration doesn't expand?
    Pls give me a respond, thx.:))

    Nah, that's just not how it works. AE will only extend layers if you use the native time-stretch/ time-remapping. If you use the Timewarp, you will have to pre-compose the source clip to a comp with longer duration and then apply the slow motion.
    Mylenium

  • Slow motion not playing back after 8.02

    I have iPhone 6 plus.  I shot a couple of slow-motion videos when device had iOS 8.0.  I just noticed that these videos are not playing back in slow-mo after the upgrade to iOS 8.02.  Anybody else having this problem?  Any suggestions?

    i noticed this too. Definitely something happened during an update. Whether it be 8.02 or IG update or something.
    Before if I wanted to upload a vid on instagram with slow mo,  I did where I want the slow mo part in default photos app, then it would apply in IG automatically, now IG or any app just plays the vid at regular speeds.
    what gives apple?

  • My Zen Touch plays some of my Mp3's in slow motion (they play fine on my PC), what's the probl

    I don't know how to explain it other than it sounds like it's playing in slow motion or at half speed, is this a problem with the Zen Touch or with the mp3's? The mp3's play fine on my PC so I'm thinking it has to be the Zen. Any suggestions?

    See the section "My tracks don't play at the correct speed e.g. they play too slowly, why?" in the FAQ post.

  • I bought my Iphone 5 a week ago, now suddenly my sound is gone when i play games, i checked everything and the weird thing is that when i put my headphone in i CAN hear the sound when in games, also he just plays music whitout my headphone. What could it

    Hello so as you can see in my question i have troubles with my sound
    I cant hear annything of my sound in game and i did check everything
    The weird thing is that when i put my headphone in i do hear the sound
    Also my music plays without my headphone
    Wat can it be ? Pls help !

    Ok, a little clarification then, you can hear music fine with the speaker and headphone?  You can hear a game's music fine with the headphone but not with the speaker?  Do you get the notification sounds ok with the speaker?
    If the speaker sound is acceptable with everything except the game then there is a problem with that game and its settings.
    If that is the case, you might want to try deleting the game and then downloading and reinstalling the game to see if that helps the problem.

  • Odd screeching sounds when using iChat Theater

    Whenever I'm sending files over iChat theater there's a prolonged screeching sound much like the one you hear in the soundtrack of the film Psycho. One guess of mine was the volume of the speakers, but then, even when that's low, file sharing still emits those strange sounds. Any ideas what may cause them?
    Mine is a PowerBook G4 running Leopard with a DSL connection. The other end uses a brand new Intel iMac.

    On Laptops go to System Preferences > Sound > Input tab and adjust the Volume downwards.
    If this does not work go to Hard Drive/Library/Preferences and delete com.apple.audio.DeviceSettings.plist and reboot the Mac.
    NOTE: This is the Library that shows up when you open the Hard Drive (NOT the one in your Home Folder OR the one inside System)
    9:56 PM Monday; January 14, 2008

  • MacBook Air makes creaking sound when put pressure around keyboard

    Had my Mac for three weeks now and have recently noticed that every time I place my hands on the device to type it makes a creaking sound, almost like it has become loose. Sharing a house with someone who has the exact same model and they have never experienced the problem. Any ideas???

    You did reset SMC.
    Resetting SMC resolves power and other related issues.
    For more on SMC:
    Reset SMC.     http://support.apple.com/kb/HT3964
    "Resetting SMC on portables with a battery you should not remove on your own".
    "Zipper" like sounds?
    You may have to take the computer to the Apple store to have it checked out.
    Diagnostic testing is free.
    Best.

  • How do i put the slow motion effect on only a part of a clip

    i need to figure out how to slow mo only part of a clip

    Marshall,
    Postion your playhead on the frame you want to begin your slo-mo then go to to you edit menu and select split video clip(or use the keyboard combination by pressing "apple key" then "T"), do the same where you want to end your slo-mo. The resulting middle clip is where you apply the slo-mo effect.
    Note: If your clip contains audio you want to keep you should extract the audio before applying the effect.

  • Odd issue with slow motion and exporting

    Hello,
    I have a project with footage taken at either 24p or 60i settings on a Canon HF200. I'm using 7.0.1, ProRes 422 selected. Frame size is set to 1920x1080. I'm exporting using the "Share" menu and the Apple TV preset.
    The project is divided into sequences. One of these sequences (whose source material shot using the 60i setting) is set to play in slow motion using the "change speed" option set to 50%.
    Here's the odd part, to me at least:
    When I export just the slow motion sequence of the project, it plays perfectly (good quality, smooth not jerky, no shadows/trails). But when I export all sequences joined together, the slow motion sequence (and just the slow motion sequence) appears stuttery, with trails on every action by the actors.
    Another odd bit: when I export just a subset of the project including the slow motion sequence and everything after it, again the slow motion sequence plays as intended, after export. So the problem only occurs if I export the slow motion sequence with anything before it included.
    Thanks in advance for any help.

    Problem solved, but I'm not sure if it was my re-importing the clips, or un-checking the "frame blending" option that did it. I did both for no particular reason, and one of them worked.

  • My slow motion effect won't work... HELP ME!!!

    I really need some help here. The original version of Imovie that came with my OS X worked great when it came to adding the effect of slow motion with the little bar at the bottom. I just recently purchased the Ilife 05 package and was all excited to get editing... but now I can't get the slow motion effect to work at all. It does all the rendering of the clip but the effect does not appear in my time line!!! What is wrong??? Please help me!!!

    Hey Karsten... I'm back again...
    Yes you guessed correctly... but I never want to see another pc in my life. Now about my prob... I did as you said and still nada. I wish the upgraded version in the Ilife 05 package still had the slow motion control at the bottom of the main screen like in the prior version, but they have taken it off of the main screen and placed in the special effects folder as "fast/slow/reverse". and it is here that it slows the clip down in the preview and renders the clip with the red bar on the main time line. But the red bar on the bottom of the clip in the time line doesn't move and ofcourse the clip is not put in slow motion.
    My brother is quite savy with Mac as well and he can't figure it out either. What do you think???

  • HVX200 slow motion ?

    I shot 720PN at 60 frames per second with the Panasonic HVX200. I used FCP "Log and Transfer," and it created Quicktime files on my scratch disk just fine. When I play one of those files in the Quicktime player, it actually has 60 separate frames per second - I counted them. So far, so good.
    But when I import that file into FCP (Sequence set at 720 P / 24 fps), it will not play as a slow motion shot. It plays at regular speed; I can see people walking around at normal speed.
    I tried using Modify - Speed to reduce the clip to 40%, but that just duplicates frames and gives a stuttering look. I can't figure out how to get all 60 fps in Final Cut Pro. Anybody know what I'm doing wrong?
    - Seth Hill

    I set the camera to FILM CAM, then selected 60 fps in the first menu, then set the record setup to 720/24PN. I thought this would "overcrank" the shot.
    Nope...that didn't do it. YOu set the camera up at 720p60 and the frame rate at 24fps. Then it records 60frames to 24 frames...thus slowing it down. Play with this setting...
    But when I put the clip into the Timeline (Sequence settings are 720P / 24 fps), the clip does not play like slow-motion; it plays at regular speed.
    Yup...because just dropping 60fps into a 24fps timeline does not slow it down.
    If I use Modify - Speed to slow it down, it does not show all 60 frames, it just duplicates frames and creates a "stuttering" look instead of a smooth, slow look.
    Correct...because that is NOT the way to slow down DVCPRO HD 60fps footage.
    Is there a way to get the "overcranked" shot into FCP without having to convert it?
    No. WHy are you against converting it? The FRC makes a new clip that is slow...so you have the main clip which is normal speed, and the new slow motion version. Why is that a problem?
    Shane

  • Wave in slow motion video type

    Hi.When i use slow motion video type, it is some waves in the picture and i think its because of a problem.but when i use video type there is not any wave.
    what is the problem and what should i do?

    Thanks for your reply.  My source footage consists of MTS files from an AVCHD camcorder.  The files are 1080i anamorphic, so 1440x1080, with an aspect ration of 1.333 and a framerate of 29.97fps.  I used one of the AVCHD sequence templates in Premiere CS5 that matched the video files.
    I'm exorting using the H.264 Bluray preset for 1080i.  I tried several of the profiles (1080p, etc), but they all end with the same bad result.  The video plays, but seems to be playing at half speed.  My 15-minute clip takes 30 minutes to play, even though the timline in VLC or WMP reports at 15 minutes.  The audio sounds fine, but stops after 15 minutes (as it should).  It's obviously out of sync, since the video is playing at half speed.
    I have read a few other articles indicating it might be an issue with the way Premiere is interpreting the interlaced footage from the MTS files?  This is beyond my area of knowledge.
    When I encode using the MPEG-2 Bluray profile, it works fine.  The video playback speed is normal.
    My end goal is to edit my MTS files from the camcorder, encode using the H.264 profile, and place in an MKV container for playback on my XBMC-based HTPC.  I'm also considering exporting as a high-bitrate MPEG-2, then using another encoder (HandBrake, etc.) to create the x264 MKV.  Any other recommendations would be greatly appreciated.  Thank you.

  • Super Slow Motion and Snap Shot - How To

    Hi All
    Just have 2 questions that i hope someone can help me with. Well, actually, one question about 2 different effects.
    Is it possible to do a super slow motion with Motion? If so, how? Is there a tutorial for this i can access?
    Also, how would you go about achieving this effect?
    http://www.youtube.com/watch?v=3ca8-gzAgtI&feature=related
    Thanks in advance
    JP

    Is it possible to do a super slow motion with Motion? If so, how? < </div>
    Start with the manual and searching the online help system. Also search here and the creativecow.net for links to some fabulous Motion tutorials.
    Super slow motion is not necessarily available, the term is relative. If you're shooting 30fps, you ahve only 30 discrete slices of each second and, even with advanced tools and lots of processing time, you can only expect to get mediocre slow motion. If you are shooting 120fps you have the temporal resolution, the basis, to process buttery smooth slow motion.
    Hit google and search for overcrank, it's an ancient film technique
    bogiesan

Maybe you are looking for

  • WBS Element in Production Order

    Hi Gurus, Just would like to briefly understand, how I can make use of the WBS Element in the Production Order (Assignment tab) to use as cost settling for a production order? How do i automate the WBS Element in the production Order for a set of giv

  • Where can I get the old drive

    Is there somewhere I can download a copy of the old X-Fi XtremeMusic drivers (web update 3)? I recently reinstalled my OS and updated my sound drivers to the most recent version (web update 4). The problem is that I'm now hearing hissing and interfer

  • HTC ONE Dialer Phortcut

    So I just got the HTC One, I tried holding out for the black but couldnt.  In fact I am actually happy with the metal, not as bad as I thought.  But anyway, As I was setting up my phone, I realized that the dialer shortcut was missing.  I do have it

  • Database in a jar file

    I have an application packaged in a .jar executable. It connects to an Access database using the JDBC-ODBC bridge, so I have the data source set up on my PC, all this works fine. My question is how would I go about putting the database into the .jar

  • Origami Slideshow Problem

    I spent 2 hours working on a slideshow of my last hiking trip. Right before I went to export the slideshow, I changed the aspect ratio rom 16:10 to 16:9. Doing this rearranged ALL of the slides in my slideshow, with no way to undo it. It took the mai