Featrue Request: White Balanace presets

It would be great to have a drop down of White Balance preset in the WB tool. There could simply be a an Add and Delete in the drop down to edit the menu, or in the Presets menu. If could initially be populated with the obvious settings, or just be blank to start with, I don't care. I'm just tired of setting it manually.
Please consider this for a future release.
Thanks,
Allan

There's a lot of difference. Preset like the following are easy to pick from a list, especially for those that can't remember the best values to use. To use lift and stamp, you have to have a sample picture with each value ready there to "lift" from.
from http://www.aeimages.com/learn/color-correction.html
Temperature Typical Sources
1000K Candles; oil lamps
2000K Very early sunrise; low effect tungsten lamps
2500K Household light bulbs
3000K Studio lights, photo floods
4000K Clear flashbulbs
5000K Typical daylight; electronic flash
5500K The sun at noon near Kodak's offices
6000K Bright sunshine with clear sky
7000K Slightly overcast sky
8000K Hazy sky
9000K Open shade on clear day
10,000K Heavily overcast sky
11,000K Sunless blue skies
20,000+K Open shade in mountains on a really clear day

Similar Messages

Saving custom white balance presets

It would be so helpful to be able to store custome white balance settings as presets, just like for most other areas of the program)
Can this be incorprated into the program please?!

I believe the OP is asking for the ability to add custom White Balance presets inside the Basic panel along with the LR presets As Shot, Auto, Daylight, etc. To my knowledge there is no way to do this currently.
I can see where this would be useful, since the Adobe provided settings" are just approximations, and will vary due to differences with each camera's sensor, electronics, lens, UV filter installed, etc. With exception of the 'As Shot' preset none of the Adobe WB presets are accurate with my cameras and have variations of 200K or more. The ability to "create" your own set of WB presets (or change the ones provided) using a simple gray or white balance card for specific lighting conditions would be very useful. It would also be helpful to have them "automatically" associated with the camera model, same as the ones provided by Adobe.
I just checked the Feature Request site and found a post from 7 months ago with this request:
http://feedback.photoshop.com/photoshop_family/topics/allow_users_to_store_custom_white_ba lances
Oh well, another good idea with few "likes." Maybe the OP could post a new request and add more detail as to "why" it is needed. I'm sure you have other reasons for wanting it, so fire away!

Error Message - "could not complete your request because the preset contains invalid data"

I am trying to open a file, and every time I do it comes up with the following error message:
"Could not complete your request because the preset contains invalid data"
I am using Photoshop CS4 on a Macbook Pro running Snow Leopard 10.6.2.
I have tried:
- restarting my mac
- opening different files created at different times
- deleting photoshop from my app folder and the app support folder from my /username/library/application support/adobe/ folder and copied them back from a Time Machine backup from a few days ago.
I was using Photoshop all day today with absolutely no problems. I have searched Google and this forum and have come up short. No one has this exact error anywhere.
Any help? Thanks so much in advance!
Pat Dryburgh

The one thing you didn't do is reset your Photoshop preferences.
Most likely the preferences got corrupted, and reference a corrupt preset.

White Balance Presets

Do you miss the white balance presets used in Adobe Camera Raw (daylight, cloudy, shade, etc.)? Here is a way we can easily add these to Aperture:
http://www.oreillynet.com/digitalmedia/blog/2006/11/createyour_own_white_balance1.html

To answer your second question, you can use the lift and stamp tool to lift only the adjustments made to an image and then stamp all selected images at once. It will take a little time, but all images will have the same adjustments as the image you lifted them from.
You can take the image you created from your gray card and develop a Preset labled gray card.
Jeff

Another white balance presets/settings question

(this is related to two other posts regarding white balance presets, but didn't want to hijack those threads with my own specific questions...)
i've got a canon s70, and have been messing around with a friends copy of aperture. the raw files of my camera are recognized (though the aperture camera support page identifies it as not optimized support), but the problem is that the white balance settings in camera are ignored.
when i view a raw file from my camera in aperture, the exif data shows that it is recognizing different white balance settings (various numbers are displayed here, for example, 1 for auto, 3 for tungsten, 6 for manual, etc). however, the temp. and tint settings are the same for all the images, regardless of wb setting (5278K temp, -18 tint).
so, here are my questions:
- is there any setting i'm missing that would let aperture correctly interpet the wb temp for a specific setting? in another thread regarding canon cameras and wb someone stated that aperture reads wb 'as shot', but it seems odd that it would recognize these different wb settings but apply the same temp and tint calculations across the board.
-i noticed that i can create white balance presets and apply them manually. i was wondering if it's possible to apply preset wb settings automatically. for example, is it possible to create an approximate wb setting for 'tungsten' (3), and then have it applied to all images with the '3' setting, either automatically on/immediately after import, or through an applescript or automator action?
while i could use lightroom, atm lightroom is lacking some features that i crucial to my wider image management/workflow needs (though it does correctly interpret my white balance settings). aperture seems like the best bet for me, but i would rather not go through my library of raw files and manually change the wb settings for each image.
thanks in advance for any help.

I don't know about your other white balance issue, but yes, you can apply a white balance to a selection of images.
Create a set of WB presets (one for daylight, cloudy, fluorescent, tungsten etc.). This takes moments and will be available on any future occasion.
Select and apply your WB preset to an image
Fine tune as needed (since in-camera auto white balance or presets often do not nail it)
Select Lift/Stamp tool
Click on your adjusted image
In the Lift/Stamp HUD, deselect all adjustments except the WB
Select all target images
Click "Stamp Selected Images" button in the Lift/Stamp HUD

Ufraw forgot default white balance presets

After some upgrade in the recent days, ufraw and gimp-ufraw no longer know the default white-balance presets of "Daylight", "Shade", etc. Additionally, in gimp-ufraw, there is a missing pixmap (red x indicates) next to the still-extant WB options (which are "Camera", "Manual", and "Auto").
Thanks for all help and work, Arch is lovely and great.
EDIT: on x86_64. Forgot to include at first, sorry.
Last edited by cookiecaper (2008-07-24 00:11:03)

In Develop/Basic next to the big 'Turkey Baster' and the WB: there is a dropdown triangle set to 'As Shot'.
Dev is in Kelvin and QD is relative.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Aperture 3 - Multiple White Balance Presets

Just installed the Aperture 3 Trial and found that on the Adjustments pane, I'm seeing to White Balance preset flyouts under the Presets dropdown. The entries on each of these flyout menus are different. Plus, I can't see what the actual settings are for each preset when I try to edit. Any idea what's going on?
Thanks.
- Leon

I think I may have answered my own questions. It looks like Aperture 3 provided it's own presets for White Balance and it imported the one's I created in Aperture 2, but put them under a second White Balance flyout. That explains mystery number one.
Regarding the ability to see the values included in the preset, they used to show up in the edit window. Now it looks like the only way to see them is to select them and see the settings they apply in the Adjustments pane.
Can anyone confirm these behaviors?
Thanks.
- Leon

Camera Raw white balance presets

When I open an image (either RAW or JPEG), I only have 3 option for white balance presets. "As Shot" "Auto" or "Custom". Does anyone know how I can get the other presets?? I am using CS3 w/ Camera Raw 4.2. I have reset my Camera Raw defaults with no luck.
Thank you for your help.

Brent: Are you absolutely, 100%, sure you are opening a raw file?
JPEG and TIFFs so not have these extra presets because they don't make sense since the starting point for a JPEG/TIFF is unknown.

Are there white balance presets - like in Camera Raw?

Hi. I'm newer to Aperture, and when I'm editing photos, I'm wondering if there's a white balance preset, like in Adobe Camera Raw, that match my camera's white balance options (cloudy, flash, daylight, etc.). Is there something like that in Aperture that I can't find, or am I just regulated to the sliders?
Thanks!

they are not preinstalled, but you can easily make them. just shoot several images with your camera set to each white balance, then save all the settings in the white balance brick.

Lost white balance presets?

Somehow, during the last update, I lost the white balance presets.
Now, all that shows in the menu is
As Shot
Auto
Custom
Everything else is gone. not tungsten, no flash, nothing.
How do I get these back?
Thank you
Gary

John:
Now I am feeling really stupid, and would apologize and beg your
forgiveness. Yes, I had read the materials you suggested, and oops;
I thought I was posting in the Lightroom forum, after searching for
the answer both in the forums, the FAQs and other sites as well. Thats
why I had such a disconnect with your wrong forum statement. So sorry
about that. No wonder you thought I did not follow procedures. Probably
because I am not even capable of knowing which forum I am in.
Again thanks to both of you. I have my answer to multiple problems.
Gary

LR2 White balance presets

What happened to all the white balance presets (cloudy, shade, tungsten, etc)? I just installed LR2 (on Win XP SP2) and the only presets available on the drop down menu are As Shot, Auto and Custom. Have the others been eliminated in LR2?

They were eliminated for JPEGs, long ago.

White balance presets in 1.1?

What happened to the white balance presets for JPEGs in 1.1? All I have now is auto, custom, and as shot.
In 1.0 I had all the presets for JPEG as I have for RAW. In 1.0 they were in the develop module.

on 6/27/07 12:31 PM, William Wood at [email protected] wrote:
> Joseph is correct. I have the fully paid for version of LR 1.0 and the WB
> presets were in the Quick Develop section of the Library and they did work
> fine on JPGS. Ver 1.1 eliminated them and, even worse, the WB on many of my
> JPG images is now totally wacko and I have to fix them in Develop. Those same
> images were fine in Ver 1.0 and every other image viewer I have used.
Nothing in the upgrade process should have whacked the white balance on the JPEGs though it is possible that since absolute white balance (what we do with raws) can't actually be sensibly applied to JPEGs that we're now looking to an incremental value. When you have one of these, what values do you see in Develop for temperature, tint, and white balance?
As for the availability of the settings in Quick Develop, they were just as wrong there as they were in Develop. The challenge for QD is that it might actually be working on a mixture of raws and non-raws.
Mark

White balance presets and other random questions

Hi,
I'm new to aperture and I had a few questions:
1) Is there a white balance preset, i.e. daylight, shade etc, or do you manually have to dial these numbers in each time?
2) Is there another color meter aside from the loupe? Something that I can leave on the same spot in the image while I'm trying to correct color?
3) I have roughly 5000 nef images on a second hard drive on my G5, is there a way to keep the library external (like Lightroom), or do I have to reimport all of these images in to aperture's library?
4) Where does the image library like to live – where will it be fastest? Should it be on the startup drive, or is there a speed advantage to putting it on a secondary drive (like photoshop)?
Cheers,
G5 Dual 2.0g Mac OS X (10.4.3) macbook pro 2.0g

Hi Ned(bot?),
1) Unfortunately, no. You have to dial these in each time. If you dial it in for one image you can lift and stamp to others, but it's a bit hit or miss.
2) The color meter is always active -- check near the histogram, it shows the RGB and L values for each pixel... this has been since 1.1.
3) You must import the images into Aperture's library. Note Aperture can have multiple libraries... the only thing is to switch between them you need to make a preference change and re-launch Aperture. For the photos to be accessible from other applications, while inside Aperture's library, you can either make a smart folder which exposes them from the Finder, or you can use a tool like iView Media Pro which can peer inside Aperture's library (which is really just a folder).
4) On a desktop machine, the library will be fastest on the internal drive. On a laptop -- it depends... A Firewire 800 connection to a 7200 RPM disk will be faster than an internal 4200 or 5400 RPM drive... a Firewire 400 connection may be slower. Does your MBP have a 5400 or 7200 RPM internal drive? The latter is better, but the difference won't be colossal.

White Point Presets?

Hello all, I am using the trial version of Aperture2 and so far, I really like running a native pro image editor. I was using Lightroom (still am, mainly at the moment), and it has built in white point presets (daylight, shade, tungsten, etc). Does Aperture have this too? I was looking and I have to admit I haven't looked too thoroughly, but it's not so easy to find if it's there.
Thanks for any help you can offer!

there are no built in white balance presets... but you can create your own ...
here is a post on a blog that i used to make my white balance presets ...
http://blogs.oreilly.com/aperture/2006/11/create-your-own-white-balance-1.html

Allow SET button on 6D to change White Balance Preset

On the EOS 6D right now, there is no fast/easy way to change/set the White Balance. Even my old 30D camera has a WB button where you press it, then rotate the main dial to change the WB presets.
On the 6D right now, you can customize the SET button to change IMAGE QUALITY, PICTURE STYLE, MENU, ISO (hold the set button and rotate the main dial), FLASH COMPENSATION.
I wish Canon could include White Balance as one of the options. There are already a button for ISO and MENU, yet they're included in the option. I bet everyone who is using the 6D miss the WB button. That's the first one I notice when using the 6D.
Just my wishful thinking, but I doubt that anyone from Canon will read this one.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

hsbn wrote:
On the EOS 6D right now, there is no fast/easy way to change/set the White Balance. Even my old 30D camera has a WB button where you press it, then rotate the main dial to change the WB presets.
On the 6D right now, you can customize the SET button to change IMAGE QUALITY, PICTURE STYLE, MENU, ISO (hold the set button and rotate the main dial), FLASH COMPENSATION.
I wish Canon could include White Balance as one of the options. There are already a button for ISO and MENU, yet they're included in the option. I bet everyone who is using the 6D miss the WB button. That's the first one I notice when using the 6D.
Just my wishful thinking, but I doubt that anyone from Canon will read this one.
Hi,
The missing WB button is something we noticed right after the announcement and we also don't understand why Canon removed it, since it so important for Photography and Video.
Your request is completely logical and fair, and can be implemented via Firmware.
- I suggest you to contact Canon and let them know your request, all EOS 6D users should do the same indeed.:
Canon Customer Support Center:
Phone: 1-800-OK-CANON / 1-800-652-2666
TDD: 1-866-251-3752
Email: carecenter (at) cits (dot) canon (dot) com
- Maybe there is a section on this forum to report issues and request improvements?
Please post here the reply from Canon and let us know the progress.
Regards
HD Cam Team
Group of photographers and filmmakers using Canon cameras for serious purposes.
www.hdcamteam.com | www.twitter.com/HDCamTeam | www.facebook.com/HDCamTeam

Featrue Request: White Balanace presets

Similar Messages

Maybe you are looking for