Feature in Time Managemet

Hi,
Is there any features to stored planned working time in infotype 0007

Dear .......
For 0007 Infotype purpose we have to maintain two feature in time management.
1. SCHKZ for Default Work schedules in 0007
for SCHKZ retn value is work schedule rule,u have to maintain.
2.TMSTA for Time management status
If you are run the time evaluation in time management,please maintain the proper retn value in TMSTA feature.
0 No time evaluation
1 Time evaluation - actual times
2 Time evaluation - PDC
7 Time evaluation without payroll integration
8 External services
9 Time evaluation - planned times
Regards
B4SAPHCM

Similar Messages

Is 11g Enterprise version feature or time limited for personal use?

I am not sure. Idid not find an exacty statement.
Is the Enterprise (not Express !) Version 11g feature or time limited for personal use?
Peter

PavanG wrote:
You can use it for free. There are some components which need licensing such as RAC and OLAP.For personal/learning use, no licenses are required to use any of these features.

Guest network feature of Time Capsule/Airport Extreme in conflict with DNS on OS X Server?

Hi, I want use the guest network feature of Time Capsule/Airport Extreme which requires an external DNS server but my OS X Server is the dns server...Can I configure server and airport with an external dns without messing up my OS server?
Thx Ron

If you want to use the guest network while also using your server for DNS - you will need to do the following: It's a bit painful - but it works.
On your Airport Device (Airport Extreme or Time Capsule) - in the Internet tab you will need to do one of the following:
1) Leave the DNS Servers Blank - which they will default to the DNS servers provided by your ISP.
2) Actually enter your ISP's DNS servers.
3) Enter Open DNS servers (I use 208.67.222.222 / 208.67.220.220).
The DNS servers specified in the airport device must be internet routable addresses (if you are going to use the guest network functionality) - and cannot refer to private ip address (e.g. 10.x.x.x, 192.168.x.x, etc).
Here is the painful part...on all of the devices (Macs, PCs, phones, ipads - that will be used on your "private" network 10.0.1.x - you will need to provide static DNS setting (but still allow DHCP to assign the devices IP address). You will specify 10.0.1.13 as primary DNS and 208.267.222.222 (or your ISP's primary DNS IP).
One you do this - your devices that you permanently use on your local network - will still use your server for DNS - and the external DNS - should your DNS server happen to be down.
Anyone visiting your house - will connect to your guest network - and automatically be DHCP assigned a guest IP address - and the external DNS servers that you specified in the Airport Extreme device.
This has been working great for me. I suspect that the guest network functionality is flawed in the Airport Extreme/Express and Time Capsule. Since I do not have another router that provides a guest network - I cannot say whether this issues is limited to the Airport devices - or whether this workaround would need to be done - regardless of which brand of router is providing the guest network.
In a nutshell - your household permanent devices will have to specify static DNS servers - but your guests will connect seamlessly without having to change and risk messing up any of their device settings.
If this solution works for you - Please be sure to click either "This solved my problem" or "This helped me".

I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

As described above.
I do not own neither a Mac nor an iOS devices. May I still be able to use all features of Time Capsule, including remote access over the internet?

You will have setup issues.. as the latest AC model requires a Mac or iOS device.. eventually apple will release a windows version of the utility.. and the current one does partly work but Apple seem in no hurry.
You can find a Mac or iPad equipped friend to do the setup.. once setup the Windows computer can use it.
BUTT you cannot access it from remote..
Not with windows. You need BTMM and iCloud account. AFAIK even with those you cannot reach the TC.
You can do it manually.. using a vpn. Buy a proper vpn router and use a vpn client on the windows computer.. the TC would be in bridge to the network..
Apple really did not make this for windows.. and SMB access is only provided on LAN access not WAN.

Visual Studio 2013 is creating new feature every time new list definition is added

We are using Visual Studio 2013 and details are as under:
Microsoft Visual Studio Ultimate 2013
Version 12.0.30501.00 Update 2
We we add a new list definition in our project, it creates a new feature with it. If we delete the feature and add list definition in the existing feature, list is created but columns are not added in the list.
Same thing happened if we rename "Feature1", a new feature is created every time a new list definition is created.
This doesn't happen when we add a Visual WebPart.
Also, we have three different custom list option in the drop down in new list creating wizard.
Is this a bug or we are doing something different.
http://farhanfaiz.wordpress.com

Intellisense has a bug in VS2013 where it doesn't recognize InitializeComponent when you start working on the XAML. My feeling is that if you try to compile this app, it will run fine (as long as there are no actual errors).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Two features whose time has come !

(1) MUST HAVE FEATURE -- Resync == stop the sync with current computer WITHOUT DELETION of all files on ATV.
Realy, this is super annoying. Especially when there is troube in the syncing pc. Just leave them there, do not delete them for christ sake. Be smart and continue to be aware of all music there, to avoid duplications.
(2) MUST HAVE FEATURE -- PC control == allow iTunes on any network PC, to control ATV, exactly as you do that with the iPod remote software.
The streaming ability is nice, but not what we need. We want control. And my Plasma is ALWAYS closed. I dont want the 42" plasma TV to be open and control ATV from there. I never do that. I use the iPod. But many times, the laptop is open, and here, I can more easily do things that are hard to do on the iPod. There are many laptops, and only one synced PC, in the other room, and even there, all I can do is sync playlists to ATV, in order to use with the pod.
I am sure Apple understands what I am saying, but they still delay giving out this feature. Why? in order to sell pods? Nay, this is a stupid strategy.
Folks, if you join in, they will start to listen over there, in the thick headed basements of Infinite Loop 1.
Thanks

http://www.apple.com/feedback/
These Discussions pages frown on "poll" questions.

Feature request : time to show identity plates in a slideshow when 'Fit to music' is selected.

When using the 'Fit to music' option in a slideshow, and with one, or both options to show identiy plates selected, then the ability to choose an independent length of time to show the identity plates would be useful. Possibly even a different length of time for the intro and ending identity plates.
At the moment if you choose 'Fit to music' the time each slide is shown is also used for the identity plates. When you only have a few images, compared to the length of the music, this means that the identity plates are shown for too long on the screen.

For that ind of precision and flexiblity make your slideshow in an app like iMovie, PhotoToMovie or Final Cut Express.
Regards
TD

I thought we were going to see a new sharpening/focus feature this time.

I remember seeing a video demonstrating a new process of creating a sharp image. Maybe this was for some other program but I thought it was Photoshop.

I had hopes Adobe would deliver that feature in this version.
That they didn't that might mean it only produces good results on images specially prepared for demonstration.
-Noel

In mail in lion and also in snow leopard you were able to click on an incoming email address and select it in spotlight , this feature in mountain lion is now gone , where did it go it was really useful?

I used to use this feature multiples times a day as it was a great way to look up all correspondance that a person had sent through.
This option is gone now with mountain lion and I am wondering why as it was great! you just had to click on an email address and you could select looking it up within mail.

Hi There Linc Davis,
Wow, you are the best.
Yip this is what the website looks like. Great job Linc Davis.
Not surprised that the "Shop" tab is missing. Darn.
Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
Please Linc Davis

What's the best way to use Time Capsule through Extended Wireless Network?

I am operating four computers, three Apples and a PC. All the Apples use Snow Leopard. I have a large house where the cable company's modem and internet access is located downstairs at the far back of the house. That is where I have a 2Tb 802.11n Time Capsule (TC) connected to the modem by ethernet cable. My iMac is there, connected to the TC by ethernet cable. In the middle of the house, also downstairs, I have an Airport Extreme (802.11n) operating as a wireless bridge. Upstairs in the front of the house (very far from the TC and closer but not very close to the AE) I have a home office. That is where my other two Apples--a MacBook Pro and a MacBook Air--are usually located. The PC is located in a bedroom directly above the TC and wirelessly connects to it. At all locations, I get four radio signal strength bars. However, I am not sure that the AE is doing anything, because I get four bars regardless of whether the AE is plugged in, or not. When it is turned on, Airport Utility on all computers shows both the TC and the AE, but I have not been able to find which Airport ID I am actually connected to.
From my home office I do temporarily lose my internet connection from time to time each day, but the connection recovers usually within seconds. I assume this reflects occasional interference or other loss of wireless signal in the distant home office, although I do not see the radio bars diminish to less than the four bars.
All three Apples are set up to use the same TC for backup into Time Machine. However, I have been getting errors on the laptops operating in the home office (a long way from the TC and perhaps connecting directly over wireless or perhaps wirelessly through the AE bridge. Some messages are to the effect of being unable to backup, and others more recently report errors. I think that either due to connection interruptions or merely by suspending or turning off the computer while in the middle of backing up, errors in the Time Machine files were created. I have been unable to delete more than a few of the 8Mb sparsebundle bands so that I can completely get rid of one of the sparsebundles for the MacBook Pro. I was able to get rid of the other sparsebundle for that computer and also the sparsebundle for the MacBook Air. I am reluctant to erase the entire TC, because it has been working for the directly connected (by ethernet cable) iMac sitting right next to the TC.
So, I am wondering what is the experience of others who are trying to use TC successfully from computers located a long distance from the TC with either a direct wireless connection or a bridged wireless connection through an AE or other bridge.
And does anyone have good ideas about how to delete the sparsebundles effectively? I read the various questions and answers in the support community, but so far nothing that I have tried based on those messages seems to work. It seems that when all the Time Machines are set to "Off" and the sparsebundles are expanded to show the individual bands, we ought to be able to delete them fairly expeditiously. Sometimes, I can delete one band fairly quickly, but then the second band will hang forever. More often, I can't even delete the first band.

Thank you, Bob. I followed the procedure you stated. My AE is working. I did register its BSSID when I put my laptop next to it. This is also the BBSID I am getting when in my home office at the far end of the house from the TC. This means I am using the extended bridge AE when working and trying to use the automated backup feature in Time Machine. Do you think I should turn off Time Machine on these laptops when they are in the home office, and bring them into the room with the TC occasionally to have a better connection (wireless to TC or by connecting an ethernet cable) when trying to make Time Machine backups for them?
Interestingly (in contrast to the exact match of BBSID's for my AE), when I compared the BSSID for my TC in Airport Utility to the BBSID of the TC using the option key and the fan shaped Airport icon, the BBSID's matched except for the last two digits. In Airport Utility, they are 2F. In the fan shaped Airport icon they are 30.
Also, the AE signal, being centrally located on the first floor of the house, seems to be the one most in use. When I walked my laptop away from the AE all the way back to the TC, the laptop automatically switched over to the TC only once. Most of the time, the laptop is still connecting wirelessly with the AE. To switch back to the TC, I have to turn Airport off, and then turn it back on again.
I don't know how efficient or inefficient the Time Machine is when connecting to the TC indirectly through an AE bridge.

How do I sync travel time from iCal to calendar on an iOS device?

Hi, I really like the feature travel time in iCal. Unfortunale it only works great on the Mac. Therefor I only get the correct time when to leave when I am at home.
I have an example:
I made an apointment that is 2 hours and 3 minutes travel time away on my iMac. This is actually transferred to my iPhone correctly.
I also added an apointment with a lication in the same city. On the iMac it shows me that I will need 8 minutes from the first meeting to the second apointment and that it will remind me in time to leave. Everything seems fine. But when I look in calendar on my iPhone it will remind me 1 hour and 8 minutes before the meeting starts. That does not make any sense.
I thought that maybe iOS calendar adds the usual time set to remind me and adds the driving time. This is not the case since the usuall time is set to two hours. On the iMac the usuall time to remember me is set to one hour. It is probbably coming from here that it adds the hour but it does not make sense.
Does anynbody know how to use the travel time funktion properly for all devices?
I am also lokking for a way to set the reminder to travel time plus X minutes. It would make sence to get reminded when to get ready and not when you sit at your desk and are actually supposed to get out of the house...

Ok, I found the answer.
iCal will push the travel time plus the standard reminder time to the iOS device. So I set the standard remeinder to 10 minutes and I know whenever I am reminded that I have 10 minutes to get going. We can only hope that Apple will work some kinks out of this feature and we will be able to set a standard reminder for all appointments with travel time like "Leave in 30 minutes" to finish up what your doing or wrap up a meeting and then "leave in 5 minutes" to really get going. If you have the same issue write to apple.com/feedback. Maybe they will work on it if the get more feedbacks...

What happened to event times in the monthly calendar?

I upgraded (not really) to Mavericks and there are numerous issues; mail showing headers and no content, safari pages open completely jumbled and an essential calendar feature, event time in the month view, is gone.
Apple seems to be dumbing down it's systems for personal use while flipping the bird to corporate users.

Hey there,
You can get the times to appear in regular (not full screen) view as well - just grab the edge of the calendar and drag it out to the left or right a bit; the times appear automatically at a certain window size.
from here:
https://discussions.apple.com/message/23735911#23735911
cheers,
AT

How can I set my time capsule to back-up only once a day?

How can I set my time capsule to only back-up once a day. It appears to be backing up several times a day. Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.

tdenny2 wrote:
Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.
Then something is wrong. Changing the schedule will only deal with the symptom (and give up one of the better features of Time Machine's usually quick and unobtrusive hourly backups).
See if the size of the backups makes sense, considering what you've changed since the previous one. If it seems much too large, that may be the problem. See #D4 in Time Machine - Troubleshooting for some common culprits and ways to see just what's going on.
If the sizes seem reasonable, see #D2 in the same link for things that can cause extra-slow backups.

Error occurred in deployment step 'Activate Features':EXCEPTION HAS BEEN THROWN BY THE TARGET OF AN INVOCATION?

Hi All,
While building event handler to call webservice facing "Error occurred in deployment step 'Activate Features':EXCEPTION HAS BEEN THROWN BY THE TARGET OF AN INVOCATION"; If comment webservice, then build successfully. How to fix this issue?
Thanks in advance!

hi
if you call WCF service in feature event receiver you need to ensure that proxy is properly configured. In most cases proxy is configured via web.config file using <system.serviceModel> section, but if it is used in feature receiver it depends on how
you activate the feature:
1. if feature is added to onet.xml of custom web template which is used for creating site collection from Central Administration you will need to modify web.config file of CA
2. similar to previous but instead of site collection you try to create sub site using custom web template: in this case you will need to modify web.config of your Sharepoint web application
3. if you activate feature from timer job somehow, you will need to modify owstimer.exe.config
4. if you activate feature form powershell, most probably you will need to modify or create powershell.exe.config, but I didn't try it
The most simple way which will work in all cases is to configure WCF proxy programmatically. See the following forum thread for details:
How can I set an HTTP Proxy (WebProxy) on a WCF client-side Service proxy.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

Can Time Machine backup USB Drive connected to Airport Extreme Base Station

I need a new N based wireless router. I would prefer to get just the $179 Base Station and not the $299 Time Capsule. I already have a nice external USB 500GB drive that I would connect to the AEBS. So, once I have this new wireless router/base station installed at home and I have the external USB drive connected to it, can my new Macbook Air with a USB connected 400GB drive be used to backup what is on the Macbook Air and also backup the 500GB USB drive info that is connected to the extreme base station?
Thanks
tj

I found this when searching Apple's web site but it is old, October 2007, and said it could not be done. Has this changed since then?
Here is what I found.
Mac OS X 10.5: Time Machine doesn't back up to AirPort Disks
* Last Modified on: October 26, 2007
* Article: 306833
Time Machine in Mac OS X 10.5 Leopard can be used to back up to many kinds of Mac OS Extended-formatted drives, but it does not support AirPort Extreme's AirPort Disk feature.
Time Machine can back up to another Mac running Leopard with Personal File Sharing, or to a Leopard Server volume, or an Xsan storage device.

Feature in Time Managemet

Similar Messages

Maybe you are looking for