Feature NUMAP - Applicant Number Range is not working

Dear Experts,
I have set number range from xx to xx with number 25 (for Applicant Number), and set the NUMAP feature as follow:
Molga:
>>25 Singapore
     >> PERSG (Applicant Group)
          >> Z Outsource Employee
               >> 25 (number range that i have set up earlier)
The problem is whenever i perform initial data entry the applicant always took other number range ( i already choose the Z as the applicant Group and personnel area that correspondence to Singapore). Do I miss something here? Thank you.
Best Regards

HI,
First maintain the number range through Transaction code - PB04. Like
No            From Number             To Number                    Current Number        External Number Range
01            000000001                  00001000                                                      Tick th emark if you want external number
Then Maintain your Feature NUMAP.
Country grping- like (25)
Return Value  (01)  As we have defined in PB04.

Similar Messages

  • PR number range Exit not working

    Hi all ,
    We are using Exit for assigning the number range to the PRs   using  M06B0004  and  M06B0003  but its not picking the exit .
    We are using the same  exits for getting the number range for other roll outs (Plant numbers )and its working fine .
    I cant debug it as it doesn't stop there even if I put a hard break-point  .
    Thanks in advance,

    Hi Naval,
    Please try user exit MEREQ001 with function module EXIT_SAPLMEREQ_009.
    Hope it works for you...
    Best regrads,
    Heydarul

  • Table range is not working!!

    Hello all,
    I am using the JHeadstart 10.1.3 production (build 91) and JDeveloper 10.1.3
    I have a main group and 2 detail groups (nested) and regions on the main group. I tried to limit the number of rows by the "table rangë", by selecting it and putting the number of rows and its not showing on the page. I am getting the entire rows.
    any comments about it
    thanks
    san

    San,
    Hmm, very strange. Is this the only page where table range is not working? Can you try creating a new project from scratch and see whether it works correctly there?
    Steven Davelaar,
    JHeadstart Team.

  • Message no. 8I766 Number Ranges are not maintained For Extended Withholding

    Dear All,
    I am facing the following problem when i am trying to generate the withholding tax certificate
    1.) Message no. 8I766 Number Ranges are not maintained For Extended Withholding Tax 
         Number Ranges are not maintained for Business Place and Section. Check entries in tables J_1iewt_cert  (for Business Place) or J_1iewt_cert_n (for Section Code) and j_1iewt_certno  in EWT.
    I have checked all the above tables and found that the entries are maintained
    2) When i am trying for print priview and then print its generating spool request and the certificate is getting saved -
    > here the following problems are faced
          A) . TDS Number is not coming
          B).Details Of the tax deductor ( Name , Adress , TDS Circle , TAN & PAN is not coming Where       to update these details
          C) In Amount Paid / Credited Column - Some fixed amount is comming irrespective of the actual amount credited
    Please help me in soving the above issues
    Thanks & Regards
    Arun.R

    Hi
    You need to maintain Section Code wise number range . Go to Sm30 Select Table J_1IEWT_CERT_N and maintain it.
    Thanks
    GG

  • I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

    The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

    You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011

  • Qualified Range is not Working

    Hi,
    I am having issue with Number Range getting crated for my Customer Number.Steps what I took to Acheive .
    In Console  :
    For Remote System R/3 
    Key Genration : Qualified Range
    Lookup Fields : Account Group.
      Even For Account Group  table has Key Mapping set to "Yes"
    Then in the syndication Remote Key Value is mapped to Customer Number .When I syndicate the Records customer number not getting created and also when I check the Edit Kay Mapping,doesn't show anything for the Record.
    Please help us onthis ,do I miss something here.
    Thanks,
    Manju

    Hi,
    after completing MDM Console setting for qualified number range
    kindly Note following points:
    1. make sure main table(for e.g. Product) and account group table key mapping should enable
    2. import main records with specific remote system
    3. open syndication map, and map value field under remote to destination side
    4. in syndication map properties tab select remote system under Remote Key Override
    5. Dstination preview tab will display customer number based upon qualified number range
    Thanks,
    Jignesh Patel

  • The "FIND" feature in the Edit menu does not work. I can't find anything on a webpage

    The "FIND" feature in the Edit menu does not work. I cannot search a page. If I am looking for the word "Doctor" and I know it is on the page. All I get after typing the first letter is that the typing box turns red.
    This is not fun.

    Make sure that <b>[] "Match case"</b> on the Find bar (Ctrl+F) doesn't have a check-mark.

  • Skype number is suddenly not working for me and my...

    Skype number is suddenly not working for me and my colleagues to RECEIVE outside calls.  Any ideas?
    When I try to call my skype from my cell, it doesnt ring on either end.  It appears connected on the cell phone since the counter clock for the call is increasing, but it doesnt ring or connect.
    This is the same for me and at least 2 of my colleagues.  It was working all day, till suddenly it did not.
    When outside people call, it just gives us a missed call or voicemail email, but does not show a missed call on our skype.
    When I call an outside number from skype, it connects.
    Thanks for any help ASAP!

    I think this might have been happening to me earlier.  If you wait like 30 seconds when you called a machine said "All circuits are busy. da da da".  I was looking for an answer and google only brought stuff from like 2010.  It's working now after an hour or so.
    Sucks cause I use skype for work and was desperate to find a quick reponse but couldn't.

  • The transcription feature on my ICD-AX412 is not working

    The transcription feature on my ICD-AX412 is not working. I keep playing the file and nothing is converting to text.

    If you are unable to press the Transcription button in Sound Organizer, check the type of file you are working on. The Transcription feature of Sound Organizer is available only for files imported as recorded audio. 
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/LapMagWin

  • Funds mngt - Number range 01 not found for object BULI_DOCNR

    Hi all
    need some urgent help to crack an error am getting while creating a budget in funds management.
    the error am getting is
    "Number range 01 not found for object BULI_DOCNR in fiscal year 2007"
    I have maintained the number range in
    Public Sector Management-Budgetary control system-Budgeting-Budget Entry Documents-Maintain Number Range Interval for Entry Documents.
    But am still getting the error....
    will really appreciate some help on this
    thanks in advance

    The number range object refers to  "FM budgeting line item number "
    Are you using Former budgeting or BCS ?
    Try t-code- ok11 and ok91 under former budgeting.
    Thanks
    Siva

  • Number range interval not found for object ISH_NLEI in executing NP38

    Dear ALL,
    In executing Transaction NP38 when we save the surgical procedure codes the system
    generates an error message "number range interval not found " . The object referred here
    ISH_NLEI number range has already been defined in spro Define technical number range.
    Please assist what should be done here to resolve the problem.
    Regards
    Ramit

    Hi, check if it maintained in tcode snro for this object

  • I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    I have a trial version of Photoshop and Lightroom installed with a view of taking out a subscription. Some of the features in this trial version do not work is this just because it is a trial version.

    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • The change pronunciation feature of my VoiceOver utility is not working

    The change pronunciation feature of my VoiceOver utility is not working.  When I change the pronunciation of a word it makes no difference, the voice over still uses the original pronunciation.  This has happened both in Lion and Mountain Lion.  Any ideas what could be causing this?  How to rectify it?

    If this post is correct, it can't be changed.
    https://discussions.apple.com/message/4988176#4988176

  • I received a tracking number that is not working!

    I didn't not pre-order my iPhone 4s 16gb until yesterday afternoon. I immediately got an order confirmation e-mail. Later in the afternoon, I received an email saying that my order had been shipped via USPS and they gave me a tracking number which did not work. I assumed it wasn't working because of the holiday and no mail service. I checked again this morning and it still doesn't work!  My bank account has still not been charged for my order, and when I check my order status on Verizon it states that its processing my order and the expected ship date is 10/21/11. Why would I get an email stating that my phone was shipped when everything else clearly contradicts that statement?

    Others have reported getting a USPS Tracking #.  Did you order any accessories? This would be the most likely explanation. Also note that the USPS is painfully slow in updating its tracking, sometimes its never updages, and other times it updates after the package has arrived. It's by far the worst tracking system there is and though it's gotten better, it still needs lots of improvement. And if you haven't been charged, it's most like not the phone. There are thousands upon thousands of people who ordered the 16GB at 3AM (or a little before) on Friday, and they haven't gotten their e-mails yet. 

  • For object RF_BELEG number range does not exist

    Hi,
    while doing PGI, i get an error For Object RF_BELEG ,number range does not exist in company code ABCD. Where do i create the number range for this. I tried with FBN1 but not useful.
    " Diagnosis says, the database table NRIV has the delivery class as C. Make chages in customizing. "
    what could be the reason for this error? can anyone help me to fix this error.
    i tried to fix it through transaction code 'SNRO' and 'OBA7' but in vain
    can anyone help me out

    Try Extending the same in VN01 , and assigning it to your relevant document
    Cheers

Maybe you are looking for

  • ITunes Match is no longer working on my iPhone

    I play music through my iPhone 5 using iTunes Match. Recently, it stopped working. Suddenly, most songs have a red plus sign next to them. I've no idea what this means and the songs won't play. My iTunes Match subscription was recently renewed, by th

  • I have 3.0 but need an older version to work with Kurzweil KESIReader, how do I get an older version to use for schoolwork?

    I am disabled and need to use Kurzweil to read to me, this requires an older version than 3.0 to work with their KESIReader to read the web. How can I get an older version that will work with my other program?

  • How to show thumbnail images in finder?

    Windows can do this, so I'm sure Mac must be able to .... When I am viewing a list of jpegs in the finder, how can I see thumbnail versions of the images? Currently, all that's displayed is the jpeg icon. Thanks.

  • BUG?? Syntax Highlighting Regular Expressions

    I'm working on a rather long regular expression in dreamweaver code view. It has about 200+ characters in it. I wrote it in another application and copied it over for use in js, and it wouldn't highlight correctly (sort of like when you leave off quo

  • EA1 - PgDown, PgUp doesn't work in editors

    SQLDev version: 4.0.0.12, Windows XP Select some table -> right-click Open -> select "Data" tab -> pressing keys "Page Up", "Page Down" doesn't work. The same is with "Columns" tab (you can check if you have a table with a dozens of columns) A little