Feature option request - SQL Tuning Advisor

Hi,
Love the ability we can run SQL Tuning Advisor so easily in SQL Developer, this is how it should be simple. However we can not specify a few parameter like: time_limit, task_name and description. Would be helpful to have these options, especially increasing the time_limit option!

At least the limit will be increased: 3.0 Tuning Advisor Times Out
Regards,
K.

Similar Messages

Sql tuning advisor for concurrent requests

Dear all,
I am having one doubt in my mind from very long time.Can we use sql tuning advisor from 10G(EM) to tune concurrent requests and reports?
Regards

Hi Helios,
I am just thinking wiht voice. If you have one code blog which is typed in sql-pl/sql for your concurrent request, its going and run on dbtier. So it has one SQL'ID and also can be check on AWR report. So i belive you can use sqltuning adviser for to can tune related sqlAFAIK, some Instances a single concurrent request may contain multiple SQLID's and in that scenario tuning approach is difficult. Any information how can we consolidate it. If tune one specific sql then the explain plan for other sql become more worst. I came across this situation so many time.
Any information or inputs on this is really appreciated.
thanks,
X A H E E R

SQL Tuning Advisor Error

I wanted to use the SQL Tuning Advisor feature of the SQL Worksheet. The DBA granted me ADVISOR system privilege. But when I tried to use the feature, I get the following errors:
An error was encountered performing the requested operation:
ORA-06550: line 20, column 101:
PLS-00103: Encountered the symbol "ANYDATA" when expecting one of the folllowing:
.(),*%&=-+</> at in is mod remainder not rem
<an exponenet (**) <> or != or ~= >= <> and or like LIKE2_
LIKE4_LIKEC_between|| multiset member SUBMULTISET_
The symbol "." was substituted for "ANYDATA" to continue.
ORA-6550: line 20, column 140:
PLS-00103: Encountered the symbol "ANYDATA" when expecting one of the folllowing:
.(),*%&=-+</> at in is mod remainder not rem
<an exponenet (**) <> or != or ~= >= <> and or like LIKE2_
LIKE4_LIKEC_between|| mul
ORA-6550:line 20, column 179:
PLS-00103: Encountered the symbol "ANYDATA" when expecting one of the folllowing:
.(),*%&=-+</> at in is mod remainder not rem
<an exponenet (**) <> or != or ~= >= <> and or like LIKE2_
LIKE4_LIKEC_between|| multiset
06550,00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
Vendor code 6550Then I get this right after the previous one:
An error was encountered performing the requested operation:
ORA-13605: The specified task or boject staName12325 does not exist for the current user.
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.PRVT_ADVISOR", line 4841
ORA-06512: at "SYS.DBMS_SQLTUNE", line 1093
ORA-06512: at line 2
13605.0000 - "The specified task or object %s does not exist for the current user."
*Cause:   The user attempted to reference an advisor task or object
    using a anme that does not exist in the Advisor repository.
*Action: Adjust the name and retry the operation.
Vendor code 13605Can someone please help me? I am not a DBA so I stumped by these error codes.
Oracle SQL Developer 3.0.04 Build MAIn-04.34
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0
Robert

The query is
select      "V_CDR_OUTGOING_CALLS"."FIRST_NAME" as "FIRST_NAME",
      "V_CDR_OUTGOING_CALLS"."MIDDLE_INITIAL" as "MIDDLE_INITIAL",
      "V_CDR_OUTGOING_CALLS"."LAST_NAME" as "LAST_NAME",
      "V_CDR_OUTGOING_CALLS"."ORG_UNIT" as "ORG_UNIT",
      "V_CDR_OUTGOING_CALLS"."DEPT_DESC" as "DEPT_DESC",
      "V_CDR_OUTGOING_CALLS"."FROM_NUMBER" as "FROM_NUMBER",
      "V_CDR_OUTGOING_CALLS"."TO_NUMBER" as "TO_NUMBER",
      "V_CDR_OUTGOING_CALLS"."TO_CITY" as "TO_CITY",
      "V_CDR_OUTGOING_CALLS"."TO_STATE" as "TO_STATE",
      "V_CDR_OUTGOING_CALLS"."DATETIME_CONNECT" as "DATETIME_CONNECT",
      "V_CDR_OUTGOING_CALLS"."DURATION_MIN" as "DURATION_MIN"
from      "V_CDR_OUTGOING_CALLS" "V_CDR_OUTGOING_CALLS"
where :P12_PHONE_NUMBER = FROM_NUMBER or :P12_PHONE_NUMBER = TO_NUMBER
AND "V_CDR_OUTGOING_CALLS"."DATETIME_CONNECT" BETWEEN to_date(:P12_START_DATE,'MM/DD/YYYY') AND to_date(:P12_END_DATE,'MM/DD/YYYY')The view is
CREATE OR REPLACE FORCE VIEW "VOIP"."V_CDR_OUTGOING_CALLS" ("ID", "EMPID", "FIRST_NAME", "MIDDLE_INITIAL", "LAST_NAME", "ORG_UNIT", "DEPT_DESC", "PHONE", "FROM_NUMBER", "TO_NUMBER", "TO_CITY", "TO_STATE", "DATETIME_CONNECT", "DATETIME_DISCONNECT", "DURATION_SEC", "DURATION_MIN")
AS
SELECT c.ID,
    e.empid empid,
    e.first_name,
    e.middle_initial,
    e.last_name,
    e.org_descr,
    e.dept_desc,
    e.full_telephone,
    c.from_number,
    c.to_number,
    x.city to_city,
    x.state to_state,
    c.datetime_connect,
    c.datetime_disconnect,
    c.duration_sec,
    c.duration_min
FROM v_cdr c ,
    v_cdr_emp e,
    telephone_exchanges x
WHERE c.from_number         = e.phone
AND SUBSTR(c.to_number,1,7) = x.EXCHANGE
AND LENGTH(c.to_number)     > 7;The table and views are defined as:
CREATE TABLE "VOIP"."TELEPHONE_EXCHANGES"
    "EXCHANGE" VARCHAR2(7 BYTE) NOT NULL ENABLE,
    "CITY"     VARCHAR2(200 BYTE),
    "STATE"    VARCHAR2(2 BYTE),
    CONSTRAINT "TELEPHONE_EXCHANGES_PK" PRIMARY KEY ("EXCHANGE") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "VOIPDATA" ENABLE
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "VOIPDATA" ;
CREATE OR REPLACE FORCE VIEW "VOIP"."V_CDR" ("ID", "FROM_NUMBER", "TO_NUMBER", "DATETIME_CONNECT", "DATETIME_DISCONNECT", "DURATION_SEC", "DURATION_MIN", "PKID", "DATE_OF_CALL")
AS
SELECT ID,
    DECODE( LENGTH(CALLINGPARTYNUMBER),6, SUBSTR(CALLINGPARTYNUMBER,1,2)
    || '-'
    ||SUBSTR(CALLINGPARTYNUMBER,3) ,10, SUBSTR(CALLINGPARTYNUMBER,1,3)
    || '-'
    ||SUBSTR(CALLINGPARTYNUMBER,4,3)
    || '-'
    ||SUBSTR(CALLINGPARTYNUMBER,7) ,CALLINGPARTYNUMBER)FROM_NUMBER,
    DECODE( LENGTH(ORIGINALCALLEDPARTYNUMBER), 6, SUBSTR( ORIGINALCALLEDPARTYNUMBER,1,2)
    || '-'
    ||SUBSTR(ORIGINALCALLEDPARTYNUMBER,3) , 10, SUBSTR( ORIGINALCALLEDPARTYNUMBER,1,3)
    || '-'
    ||SUBSTR(ORIGINALCALLEDPARTYNUMBER,4,3)
    || '-'
    ||SUBSTR(ORIGINALCALLEDPARTYNUMBER,7) , 12, SUBSTR( ORIGINALCALLEDPARTYNUMBER,3,3)
    || '-'
    ||SUBSTR(ORIGINALCALLEDPARTYNUMBER,6,3)
    || '-'
    ||SUBSTR(ORIGINALCALLEDPARTYNUMBER,9) , ORIGINALCALLEDPARTYNUMBER) TO_NUMBER,
    new_time(to_date(TO_CHAR(to_date('01.01.70','dd.mm.rr')+ (DATETIMECONNECT/( 60 *60*24)), 'mm-dd-yyyy hh24:mi:ss'),'mm-dd-yyyy hh24:mi:ss'),'GMT','EDT') DATETIME_CONNECT,
    new_time(to_date(TO_CHAR(to_date('01.01.70','dd.mm.rr')+ ( DATETIMEDISCONNECT /(60*60*24)), 'mm-dd-yyyy hh24:mi:ss'),'mm-dd-yyyy hh24:mi:ss'),'GMT','EDT') DATETIME_DISCONNECT,
    duration Duration_sec,
    ROUND(duration/60,2) Duration_MIN,
    pkid,
    to_date(TO_CHAR(new_time(to_date(TO_CHAR(to_date('01.01.70','dd.mm.rr')+ (DATETIMECONNECT/( 60 *60*24)), 'mm-dd-yyyy hh24:mi:ss'),'mm-dd-yyyy hh24:mi:ss'),'GMT','EDT'),'DD-MON-YYYY')) date_of_call
FROM CALL_DETAILS_CDR C
WHERE datetimeconnect <> 0;
The above view is based on table CALL_DETAILS_CDR defined as:
CREATE TABLE "VOIP"."CALL_DETAILS_CDR"
    "ID"                             NUMBER NOT NULL ENABLE,
    "CDRRECORDTYPE"                  NUMBER,
    "G_CALLMANAGERID"                NUMBER,
    "G_CALLID"                       NUMBER,
    "O_LEGCALLIDENTIFIER"            NUMBER,
    "DATETIMEORIGINATION"            NUMBER,
    "O_NODEID"                       NUMBER,
    "O_SPAN"                         NUMBER,
    "O_IPADDR"                       NUMBER,
    "CALLINGPARTYNUMBER"             VARCHAR2(50 BYTE),
    "CALLINGPARTY_USERID"            VARCHAR2(128 BYTE),
    "O_CAUSE_LOCATION"               NUMBER,
    "O_CAUSE_VALUE"                  NUMBER,
    "O_PRECEDENCELEVEL"              NUMBER,
    "O_MEDIATRANSPORTADDR_IP"        NUMBER,
    "O_MEDIATRANSPORTADDR_PORT"      NUMBER,
    "O_MCAP_PAYLOADCAPABILITY"       NUMBER,
    "O_MCAP_MAXFRAMESPERPACKET"      NUMBER,
    "O_MCAP_G723BITRATE"             NUMBER,
    "O_VCAP_CODEC"                   NUMBER,
    "O_VCAP_BANDWIDTH"               NUMBER,
    "O_VCAP_RESOLUTION"              NUMBER,
    "O_VIDEOTRANSPORTADDR_IP"        NUMBER,
    "O_VIDEOTRANSPORTADDR_PORT"      NUMBER,
    "O_RSVPAUDIOSTAT"                VARCHAR2(64 BYTE),
    "O_RSVPVIDEOSTAT"                VARCHAR2(64 BYTE),
    "DESTLEGIDENTIFIER"              NUMBER,
    "DESTNODEID"                     NUMBER,
    "DESTSPAN"                       NUMBER,
    "DESTIPADDR"                     NUMBER,
    "ORIGINALCALLEDPARTYNUMBER"      VARCHAR2(50 BYTE),
    "FINALC_PARTYNUMBER"             VARCHAR2(50 BYTE),
    "FINALC_PARTY_USERID"            VARCHAR2(128 BYTE),
    "DESTCAUSE_LOCATION"             NUMBER,
    "DESTCAUSE_VALUE"                NUMBER,
    "DESTPRECEDENCELEVEL"            NUMBER,
    "DESTMEDIATRANSPORTADDR_IP"      NUMBER,
    "DESTMEDIATRANSPORTADDR_PORT"    NUMBER,
    "DESTMCAP_PAYLOADCAPABILITY"     NUMBER,
    "DESTMCAP_MAXFRAMESPERPACKET"    NUMBER,
    "DESTMCAP_G723BITRATE"           NUMBER,
    "DV_CAP_CODEC"                   NUMBER,
    "DV_CAP_BANDWIDTH"               NUMBER,
    "DV_CAP_RESOLUTION"              NUMBER,
    "DV_TRANSPORTADDR_IP"            NUMBER,
    "DV_TRANSPORTADDR_PORT"          NUMBER,
    "DESTRSVPAUDIOSTAT"              VARCHAR2(64 BYTE),
    "DESTRSVPVIDEOSTAT"              VARCHAR2(64 BYTE),
    "DATETIMECONNECT"                NUMBER,
    "DATETIMEDISCONNECT"             NUMBER,
    "LASTREDIRECTDN"                 VARCHAR2(50 BYTE),
    "PKID"                           VARCHAR2(4000 BYTE),
    "O_INALCALLEDPARTYNUM_PARTITION" VARCHAR2(50 BYTE),
    "CALLINGPARTYNUM_PARTITION"      VARCHAR2(50 BYTE),
    "FINALC_PARTYNUM_PARTITION"      VARCHAR2(50 BYTE),
    "LASTREDIRECTDNPARTITION"        VARCHAR2(50 BYTE),
    "DURATION"                       NUMBER,
    "O_DEVICENAME"                   VARCHAR2(129 BYTE),
    "DESTDEVICENAME"                 VARCHAR2(129 BYTE),
    "O_CALLTERMINATION_BEHALF"       NUMBER,
    "DESTCALLTERMINATION_BEHALF"     NUMBER,
    "O_CALLEDPARTYREDIRECT_BEHALF"   NUMBER,
    "LASTREDIRECTREDIRECT_BEHALF"    NUMBER,
    "O_CALLEDPARTYREDIRECTREASON"    NUMBER,
    "LASTREDIRECTREDIRECTREASON"     NUMBER,
    "DESTCONVERSATIONID"             NUMBER,
    "G_CALLID_CLUSTERID"             VARCHAR2(50 BYTE),
    "JOIN_BEHALF"                    NUMBER,
    "COMMENTS"                       VARCHAR2(2048 BYTE),
    "AUTHCODEDESCRIPTION"            VARCHAR2(50 BYTE),
    "AUTHORIZATIONLEVEL"             NUMBER,
    "CLIENTMATTERCODE"               VARCHAR2(32 BYTE),
    "O_DTMFMETHOD"                   NUMBER,
    "DESTDTMFMETHOD"                 NUMBER,
    "CALLSECUREDSTATUS"              NUMBER,
    "O_CONVERSATIONID"               NUMBER,
    "O_MCAP_BANDWIDTH"               NUMBER,
    "DESTMCAP_BANDWIDTH"             NUMBER,
    "AUTHORIZATIONCODEVALUE"         VARCHAR2(32 BYTE),
    "OUTPULSEDCALLINGPARTYNUMBER"    VARCHAR2(50 BYTE),
    "OUTPULSEDCALLEDPARTYNUMBER"     VARCHAR2(50 BYTE),
    "O_IPV4V6ADDR"                   VARCHAR2(64 BYTE),
    "DESTIPV4V6ADDR"                 VARCHAR2(64 BYTE),
    "O_VCAP_CODEC_CHAN2"             NUMBER,
    "O_VCAP_BANDWIDTH_CHAN2"         NUMBER,
    "O_VCAP_RESOLUTION_CHAN2"        NUMBER,
    "O_V_TRANSPORTADDR_IP_CHAN2"     NUMBER,
    "O_V_TRANSPORTADDR_PORT_CHAN2"   NUMBER,
    "O_V_OCHANNEL_ROLE_CHAN2"        NUMBER,
    "DV_CAP_CODEC_CHAN2"             NUMBER,
    "DV_CAP_BANDWIDTH_CHAN2"         NUMBER,
    "DV_CAP_RESOLUTION_CHAN2"        NUMBER,
    "DV_TRANSPORTADDR_IP_CHAN2"      NUMBER,
    "DV_TRANSPORTADDR_PORT_CHAN2"    NUMBER,
    "DV_CHANNEL_ROLE_CHAN2"          NUMBER,
    "DATE_CREATED" DATE,
    CONSTRAINT "CALL_DETAILS_CDR_PK" PRIMARY KEY ("ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "VOIPDATA" ENABLE,
    CONSTRAINT "PKID_UNIQUE" UNIQUE ("PKID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 167 COMPUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "VOIPDATA" ENABLE
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "VOIPDATA" ;
CREATE INDEX "VOIP"."CALL_DETAILS_CDR_INDEX3" ON "VOIP"."CALL_DETAILS_CDR"
    "ORIGINALCALLEDPARTYNUMBER",
    "DATETIMECONNECT"
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "VOIPDATA" ;
CREATE INDEX "VOIP"."CALL_DETAILS_CDR_INDEX2" ON "VOIP"."CALL_DETAILS_CDR"
    "CALLINGPARTYNUMBER",
    "DATETIMECONNECT"
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "VOIPDATA" ;
CREATE UNIQUE INDEX "VOIP"."CALL_DETAILS_CDR_PK" ON "VOIP"."CALL_DETAILS_CDR"
    "ID"
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS STORAGE
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "VOIPDATA" ;
CREATE UNIQUE INDEX "VOIP"."PKID_UNIQUE" ON "VOIP"."CALL_DETAILS_CDR"
    "PKID"
PCTFREE 10 INITRANS 2 MAXTRANS 167 COMPUTE STATISTICS STORAGE
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "VOIPDATA" ;
The view, V_CDR_EMP, is defined as:
CREATE OR REPLACE FORCE VIEW "VOIP"."V_CDR_EMP" ("EMPID", "FIRST_NAME", "MIDDLE_INITIAL", "LAST_NAME", "ORG", "ORG_DESCR", "DEPT", "DEPT_DESC", "ADDRESS", "PHONE", "FULL_TELEPHONE")
AS
SELECT e.empid,
    e.First_name,
    e.Middle_Initial,
    e.Last_name,
    e.Org,
    o.org_descr,
    e.Dept,
    d.Dept_desc,
    e.Address,
    DECODE (SUBSTR(e.address,1,6),'ONEMAD','10-'
    || SUBSTR (e.telephone,9), '225PAS','10-'
    || SUBSTR (e.telephone,9), '233PAS','10-'
    || SUBSTR (e.telephone,9), '115BWA','10-'
    || SUBSTR (e.telephone,9), DECODE(SUBSTR(e.address,1,4),'PATC','11-'
    || SUBSTR (e.telephone,9), 'JAMS','12-'
    || SUBSTR (e.telephone,9), 'JSTC','12-'
    || SUBSTR (e.telephone,9), 'PABT','19-'
    || SUBSTR (e.telephone,9), 'TLPT','08-'
    || SUBSTR (e.telephone,9), 'HCMF','12-'
    || SUBSTR (e.telephone,9), DECODE(SUBSTR(e.address,1,3),'GWB','17-'
    || SUBSTR (e.telephone,9), 'LGA','13-'
    || SUBSTR (e.telephone,9), 'EWR','14-'
    || SUBSTR (e.telephone,9), 'JFK','15-'
    || SUBSTR (e.telephone,9), 'SIB','18-'
    || SUBSTR (e.telephone,9), 'MVP','14-'
    || SUBSTR (e.telephone,9), 'WTC','10-'
    || SUBSTR (e.telephone,9), 'CON','12-'
    || SUBSTR (e.telephone,9), DECODE(SUBSTR(e.address,1,2),'HT','11-'
    || SUBSTR (e.telephone,9), 'BP','06-'
    || SUBSTR (e.telephone,9), 'LT','16-'
    || SUBSTR (e.telephone,9), 'PN','07-'
    || SUBSTR (e.telephone,9), DECODE(SUBSTR(e.address,1,5),'2GWAY','04-'
    || SUBSTR (e.telephone,9), '3GWAY','04-'
    || SUBSTR (e.telephone,9), DECODE(SUBSTR(e.address,1,10),'PORT IVORY','07-'
    || SUBSTR (e.telephone,9),e.telephone) ) ) ) ) ) phone,
    e.telephone full_telephone
FROM [email protected] e ,
    [email protected] d ,
    [email protected] o
WHERE e.active = 'Y'
AND e.dept     = d.dept
AND e.org      = o.org;Robert

Additional licenses reuired for using Sql Tuning Advisor In SQL Developer 4.0.3

Hi,
We have Oracle Database 11g Enterprise Edition Release 11.2.0.3.0. Do we need to purchase an additional oracle license for using SQL Tuning Advisor Option in SQL Developer 4.0.3

We have Oracle Database 11g Enterprise Edition Release 11.2.0.3.0. Do we need to purchase an additional oracle license for using SQL Tuning Advisor Option in SQL Developer 4.0.3
The Oracle Tuning Pack is DATABASE functionality - it is part of the database. Sql Developer just uses it.
Yes - to use ANY of the features of the tuning pack requires an extra cost license.
http://docs.oracle.com/cd/B28359_01/license.111/b28287/options.htm#CIHFIHFG
Oracle Tuning Pack
The Oracle Tuning Pack provides database administrators with expert performance management for the Oracle environment, including SQL tuning and storage optimizations. The Oracle Diagnostic Pack is a prerequisite product to the Oracle Tuning Pack. Therefore, to use the Tuning Pack, you must also have a Diagnostic Pack.
The Tuning Pack includes the following features:
SQL Access Advisor
SQL Tuning Advisor
Automatic SQL Tuning
SQL Tuning Sets
SQL Monitoring
Reorganize objects
In order to use the features listed above, you must purchase licenses for the Tuning Pack, with one exception: SQL Tuning Sets can be used if you have licensed either the Tuning Pack or Oracle Real Application Testing. A new initialization parameter, CONTROL_MANAGEMENT_PACK_ACCESS, is introduced to control access to the Diagnostic Pack and Tuning Pack in the database server. This parameter can be set to one of three values:
DIAGNOSTIC+TUNING: Diagnostic Pack and Tuning Pack functionally is enabled in the database server.
DIAGNOSTIC: Only Diagnostic Pack functionality is enabled in the server.
NONE: Diagnostic Pack and Tuning pack functionally is disabled in the database server.
The Tuning Pack functionality can be accessed by the Enterprise Manager links as well as through the database server command-line APIs. The use of either interface requires licensing of the Tuning Pack

SQL Tuning Advisor Recommends New Explain Plan

Hi:
I have to believe this has been asked before but didn't see it in a forum search so I'll ask here. I had SQL Tuning Advisor look at a query and it is recommending a new plan for a 50+% improvement (hazah!). The trouble is, I don't want Oracle to re-write the plan to execute the query better, I want to know how I can re-write the query to generate that more optimal plan in the first place because I have similar systems in the field that I would like to also be optimized. What are my options?
Thanks.

Sorry Gaff I know where you are talking about but I don't have your answer, but it may be a good start going over the 19g reference guide for these dictionary views -
SQL> select view_name from dba_views where view_name like 'DBA%ADVISOR%' ;
VIEW_NAME
DBA_ADVISOR_DEFINITIONS
DBA_ADVISOR_COMMANDS
DBA_ADVISOR_OBJECT_TYPES
DBA_ADVISOR_USAGE
DBA_ADVISOR_TASKS
DBA_ADVISOR_TEMPLATES
DBA_ADVISOR_LOG
...Best regards.

[OCP exam] doubt about Automatic SQL Tuning Advisor

Hi,
Sorry for my poor english.
I am currently preparing for the OCP 11g exam.
For that, I have bought some training tools to help me prepare the exam.
But, in the chapter related to the SQL tuning advisor, some explanation really confuse me .
Extract :
<<
the SQL automatic tuning job runs every night during the maintenance window.
By default, the job makes SQL profile recommendations, tests them, and automatically implements them if they provide better performance improvement)
>>
I was persuaded it was the opposite.
I check several databases/documentation, and it's seems to be always the opposite.
By default,new sql profile are tested but not implemented automatically (you have to set a parameter ACCEPT_SQL_PROFILES TO TRUE to activate this option)
But the exam is validated on oracle 11.2.0.1, and I only have 11.2.0.2/11.2.0.3 db available.
So may be oracle changed the value of the default parameter in the new releases.
Can someone confirm if I am right or not ?

I would rather accept what is in the documentation:
"If a SQL profile is recommended, the database tests the new profile by executing the SQL statement both with and without the profile. If the performance improvement improves at least threefold, then the database accepts the SQL profile, but only if the ACCEPT_SQL_PROFILES task parameter is set to TRUE. Otherwise, the automatic SQL tuning reports merely report the recommendation to create a SQL profile." Automatic SQL Tuning
"If automatic implementation of SQL profiles is enabled (the default is disabled), then the database implements any SQL profiles that promise a great performance benefit. The implementation occurs at tuning time so that the database can immediately benefit from the new plan. You can enable or disable automatic implementation by using the SET_AUTO_TUNING_TASK_PARAMETER API to set the ACCEPT_SQL_PROFILES parameter." DBMS_AUTO_SQLTUNE

SQL Tuning Advisor on a specific SQL statement

Hi all,
How can I used SQL Tuning Advisor in Oracle EM Database Control to tune a specific SQL statement; i.e. the statement is not any of: Top SQL, SQL Tuning Sets, Snapshots Preserved Snapshot Sets.
Thanks in advance,
Ahmed B.

Hi,
You can use either the automatic SQL tuning features that are accessible from Enterprise Manager Database Console on the "Advisor Central" page or trough SQL*PLUS using the DBMS_SQLTUNE pakage:
-- creating the tuning task
set serveroutput on
declare
l_sql_tune_task_id varchar2(100);
begin
l_sql_tune_task_id := dbms_sqltune.create_tuning_task (
                          sql_id      => '<your_sql_id>',
                          scope       => dbms_sqltune.scope_comprehensive,
                          time_limit => 60,
                          task_name   => '<your_tuning_task_name>',
                          description => 'tuning task for statement your_sql_id.');
dbms_output.put_line('l_sql_tune_task_id: ' || l_sql_tune_task_id);
end;
-- executing the tuning task
exec dbms_sqltune.execute_tuning_task(task_name => '<your_tuning_task_name>');
-- displaying the recommendations
set long 100000;
set longchunksize 1000
set pagesize 10000
set linesize 100
select dbms_sqltune.report_tuning_task('<your_tuning_task_name>') as recommendations from dual;For more information, take a look at link provided by Jaffy.
Cheers
Legatti

Sql tuning advisor-10g

Dear all,
DB : 10.2.0.4.
Solaris 5.10
One of the monthly process had a problem and one of the select statements was taking a lot of time and when I ran sql tuning advisor, initially it advised me to accept the new sql profile. then since there is no improvements, I proceeded with running sql tuning advisor again which resulted in
Optimizer statistics for index "USER"."CDR_BITMAP_IDX" are stale. Consider collecting optimizer statistics for this index. The optimizer requires up-to-date statistics for the index in order to select a good execution plan.
Miscellaneous SQL Profile "SYS_SQLPROF_02492cc266e98000" exists for this statement and was ignored during the tuning process.
select b.custno ,b.contrno ,b.rowid ,a.subscr_type ,a.area ,a.subno ,
nvl(a.imsi_no,:"SYS_B_00") ,a.extn ,a.b_subno ,a.chargetype ,a.tariffclass ,
a.cdrcode ,to_char(a.transdate,'YYYYMMDD') ,to_char(nvl(a.transdate_to,
a.transdate),'YYYYMMDD') ,nvl(a.no_of_calls,:"SYS_B_01") ,nvl(a.duration,
:"SYS_B_02") ,nvl(a.act_duration,:"SYS_B_03") ,a. time ,a.time_data ,
a.act_time ,a.cdrtext ,a.ar_cdrtext ,a.cdramount ,a.cdramount_int ,
a.gross_amount ,a.gross_amount_int ,nvl(adv_cdramount,:"SYS_B_04") ,
nvl(adv_gross_amount,:"SYS_B_05") ,to_char(nvl(adv_transdate,transdate),
'YYYYMMDD') ,to_char(nvl(adv_transdate_to,transdate_to),'YYYYMMDD') ,
a.factor ,a.factor_int ,to_char(a.upddate,'YYYYMMDD') ,a.tax_class ,
a.vol_group ,nvl(a.table_gen,:"SYS_B_06") ,a.call_type ,
to_char(a.ltd,'YYYYMMDD') ,nvl(a.equipgroup,:"SYS_B_07") ,
nvl(a.equipid,:"SYS_B_08") ,dest_code ,rate_type ,org_tariff_group ,
tariff_group ,rate_pos ,nvl(a.tariff_profile,:"SYS_B_09") ,a.rowid ,
nvl(a.adv_cdred,:"SYS_B_10") ,a.SPLIT_TARIFFCLASS ,a.SPLIT_DURATION ,
a.SPLIT_cdrAMOUNT ,a.SPLIT_cdrAMOUNT_INT
from
cdr_master a ,cdr_control b where (((((b.ltd=to_date(:b0,
:"SYS_B_11") and a.contrno=b.contrno) and b.run_group=:b1) and b.cdr_flag=
:"SYS_B_12") and nvl(a.cdred,:"SYS_B_13")<>:"SYS_B_14") and
(((trunc(a.transdate)<=to_date(:b0,:"SYS_B_15") or ((trunc(a.upddate)<=
to_date(:b0,:"SYS_B_16") and chargetype=:"SYS_B_17") and (((a.cdred is
not null and a.cdred=:"SYS_B_18") and nvl(adv_cdred,:"SYS_B_19")=
:"SYS_B_20") or (((a.cdred is not null and a.cdred=:"SYS_B_21") and
nvl(adv_cdred,:"SYS_B_22")=:"SYS_B_23") and adv_transdate_to<=to_date(:b0,
:"SYS_B_24"))))) or ((a.cdred is not null and a.cdred=:"SYS_B_25") and
nvl(adv_cdred,:"SYS_B_26")=:"SYS_B_27")) or (((a.cdred is not null and
a.cdred=:"SYS_B_28") and nvl(adv_cdred,:"SYS_B_29")=:"SYS_B_30") and
adv_transdate_to<=to_date(:b0,:"SYS_B_31")))) order by a.contrno,a.subno,
a.subscr_type,a.area,nvl(a.equipgroup,:"SYS_B_32"),a.chargetype,a.cdrcode
for update of a.cdred nowait
call     count       cpu    elapsed       disk      query    current        rows
Parse        0      0.00       0.00          0          0          0           0
Execute      5    451.99    1997.19     596620   37306277    3351623           0
Fetch      404      0.96       0.84          0          0          0       39900
total      409    452.95    1998.04     596620   37306277    3351623       39900
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 185
Elapsed times include waiting on following events:
Event waited on                             Times   Max. Wait Total Waited
----------------------------------------   Waited ---------- ------------
SQL*Net message to client                     404        0.00          0.00
SQL*Net more data to client                  3219        0.00          0.03
SQL*Net message from client                   404        0.00          0.22
gc current block 2-way                      34454        0.27         21.77
gc cr multi block request                    2649        0.27          1.06
db file sequential read                    596211        0.15       1561.81
gc cr block busy                               16        0.00          0.02
db file parallel read                          11        0.00          0.04
db file scattered read                         50        0.01          0.10
gc cr block 2-way                               2        0.00          0.00
gc current grant 2-way                          6        0.00          0.00
latch: cache buffers chains                     9        0.00          0.00
gc current block congested                      6        0.00          0.02
gc current grant busy                         257        0.00          0.17
latch: object queue header operation            3        0.00          0.00
log file switch completion                     22        0.82          2.52
latch free                                     27        0.00          0.00
log buffer space                                7        0.24          0.83
log file switch (checkpoint incomplete)        10        0.98          1.47
gc cr grant 2-way                               2        0.00          0.00Any idea what am missing ?
Kai

Hi,
Try to Update the Stats of the Source tables and re-reun the Advisor, that might give or suggest different things further.
Second thing, check that Referred SQL profile and I would suggest if it not used, then drop that and check.
Surprised to see huge wait event on "db file sequential read"
- Pavan Kumar N

How to Run SQL Tuning Advisor on the SQL statement with SQL_ID?

Can you give the steps to run the SQL tuning advisor on the SQL statement with SQL_ID?
Database version: 10g Release 2

Hi,
You can use either the automatic SQL tuning features that are accessible from Enterprise Manager Database Console on the "Advisor Central" page or trough SQL*PLUS using the DBMS_SQLTUNE pakage:
-- creating the tuning task
set serveroutput on
declare
l_sql_tune_task_id varchar2(100);
begin
l_sql_tune_task_id := dbms_sqltune.create_tuning_task (
                          sql_id      => '<your_sql_id>',
                          scope       => dbms_sqltune.scope_comprehensive,
                          time_limit => 60,
                          task_name   => '<your_tuning_task_name>',
                          description => 'tuning task for statement your_sql_id.');
dbms_output.put_line('l_sql_tune_task_id: ' || l_sql_tune_task_id);
end;
-- executing the tuning task
exec dbms_sqltune.execute_tuning_task(task_name => '<your_tuning_task_name>');
-- displaying the recommendations
set long 100000;
set longchunksize 1000
set pagesize 10000
set linesize 100
select dbms_sqltune.report_tuning_task('<your_tuning_task_name>') as recommendations from dual;For more information, take a look at link provided by Jaffy.
Cheers
Legatti

Need help to debug SQL Tuning Advisor Error Message

Hi,
I am getting an error message while try to get recommendations from the SQL Tuning Advisor.
Environment:
Oracle Version: 11.2.0.3.0
O/S: AIX
Following is my code:
declare
my_task_name varchar2 (30);
my_sqltext    clob;
begin
my_sqltext := 'SELECT DISTINCT MRKT_AREA AS DIVISION, PROMO_ID,
                PROMO_CODE,
                RBR_DTL_TYPE.PERF_DETL_TYP,
                RBR_DTL_TYPE.PERF_DETL_DESC,
                RBR_DTL_TYPE.PERF_DETL_SUB_TYP,
                RBR_DTL_TYPE.PERF_DETL_SUB_DESC,
                BU_SYS_ITM_NUM,
                RBR_CPN_LOC_ITEM_ARCHIVE.CLI_SYS_ITM_DESC,
                PROMO_START_DATE,
                PROMO_END_DATE,
                PROMO_VALUE2,
                PROMO_VALUE1,
                EXEC_COMMENTS,
                PAGE_NUM,
                BLOCK_NUM,
                AD_PLACEMENT,
                BUYER_CODE,
                RBR_CPN_LOC_ITEM_ARCHIVE.CLI_STAT_TYP,
                RBR_MASTER_CAL_ARCHIVE.STATUS_FLAG
FROM (PROMO_REPT_OWNER.RBR_CPN_LOC_ITEM_ARCHIVE
INNER JOIN PROMO_REPT_OWNER.RBR_MASTER_CAL_ARCHIVE
ON (RBR_CPN_LOC_ITEM_ARCHIVE.CLI_PROMO_ID = PROMO_ID)
AND (RBR_CPN_LOC_ITEM_ARCHIVE.CLI_PERF_DTL_ID = PERF_DETAIL_ID)
AND (RBR_CPN_LOC_ITEM_ARCHIVE.CLI_STR_NBR = STORE_ZONE)
AND (RBR_CPN_LOC_ITEM_ARCHIVE.CLI_ITM_ID = ITM_ID))
INNER JOIN PROMO_REPT_OWNER.RBR_DTL_TYPE
ON (RBR_MASTER_CAL_ARCHIVE.PERF_DETL_TYP = RBR_DTL_TYPE.PERF_DETL_TYP)
AND (RBR_MASTER_CAL_ARCHIVE.PERF_DETL_SUB_TYP = RBR_DTL_TYPE.PERF_DETL_SUB_TYP)
WHERE ( ((MRKT_AREA)=40)
AND ((RBR_DTL_TYPE.PERF_DETL_TYP)=1)
AND ((RBR_DTL_TYPE.PERF_DETL_SUB_TYP)=1) )
AND ((CLI_STAT_TYP)=1 Or (CLI_STAT_TYP)=6)
AND ((RBR_MASTER_CAL_ARCHIVE.STATUS_FLAG)=''A'')
AND ( ((PROMO_START_DATE) >= to_date(''2011-10-20'', ''YYYY-MM-DD'')
And (PROMO_END_DATE) <= to_date(''2011-10-26'', ''YYYY-MM-DD'')) )
ORDER BY MRKT_AREA';
my_task_name := dbms_sqltune.create_tuning_task
                             (sql_text => my_sqltext,
                              user_name => 'PROMO_REPT_OWNER',
                              scope     => 'COMPREHENSIVE',
                              time_limit => 3600,
                              task_name => 'Test_Query',
                              description => 'Test Query');
end;
begin
dbms_sqltune.execute_tuning_task(task_name => 'Test_Query');
end;
set serveroutput on size unlimited;
set pagesize 5000
set linesize 130
set long 50000
set longchunksize 500000
SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK('Test_Query') FROM DUAL;
Output:
snippet .....
FINDINGS SECTION (1 finding)
1- Index Finding (see explain plans section below)
The execution plan of this statement can be improved by creating one or more
indices.
Recommendation (estimated benefit: 71.48%)
- Consider running the Access Advisor to improve the physical schema design
or creating the recommended index.
Error: Cannot fetch actions for recommendation: INDEX
Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Rationale
Creating the recommended indices significantly improves the execution plan
of this statement. However, it might be preferable to run "Access Advisor"
using a representative SQL workload as opposed to a single statement. This
will allow to get comprehensive index recommendations which takes into
account index maintenance overhead and additional space consumption.
snippet
Any ideas why I am getting ORA-06502 error?
Thanks in advance
Rogers

Bug 14407401 - ORA-6502 from index recommendation section of DBMS_SQLTUNE output (Doc ID 14407401.8)
Fixed:
The fix for 14407401 is first included in
12.1.0.1 (Base Release)

Sql tuning advisor 11g

Dear all,
We have installed oracle 11g on solaris. We have configured EM with this DB.. Is there anyway I can check a query using sql tuning advisor in oracle 11g. ? .. I tried, but I couldn't find the exact navigation ?. I need to submit th query and get the advise from sql tuninig advisor ?
Please guide
Kai

OEM db console ?
Am doing this for educational purpose and not in production
kai

Oracle11g standarad Edititon-Sql tuning Advisor

Hi,
Do we have provision to tune the query using sql tuning advisor in oracle 11g r1 Standard Edition SE
Thanks
mafaiz

Mafaiz,
Tuning & Diagnostic Packs are available in Enterprise Edition only
Oracle Database - Standard Edition & Diagnosis Pack???
Thanks,
Ajay More
http://www.moreajays.com

Stucked between SQL Tuning Advisor and and SQL statement

Hi,
There is an important query running on my system which consists
MEMBER OF function.
At first place let me explain why i used MEMBER OF,
I am sending a string( eg : #123#124#125) to query and a function converts this string into a number array.
After then I use this number array inside my sql.
The reason I am using this structure, in order to generate a dynamic IN statement inside my sql. (IF you have any other solution that would be great)
The most important point is; when I put this statement to SQL Tuning Advisor the response is only ORA-00932: inconsistent datatypes: expected UDT got CHAR
Any answer will be greatly appreciated.
Thanks

Solomon Yakobson wrote:
Object oriented stuff almost never provides better performance over relational. You should stay away from MEMBER OF if performance is a factor. Instead of:
WHERE expr MEMBER OF nested-tableI'd test:
WHERE expr IN (SELECT column_value FROM TABLE(nested-table))SY.
expr IN (SELECT COLUMN_VALUE FROM TABLE (CAST (v_type_number_table AS type_number_table)))worked like a charm. i hope tuning advisor will like it as i do.
thanks.

Oracle 10g SQL Tuning Advisor

I am working as a junior DBA. I tried to tune a query using SQL Tuning Advisor that is with DBMS_SQLTUNE.I have created the tuning task successfully with DBMS_SQLTUNE.create_tuning_task.But when i execute the tuning task with EXEC DBMS_SQLTUNE.execute_tuning_task() i got an error like
SQL> EXEC DBMS_SQLTUNE.execute_tuning_task(task_name => 'rep_three');
BEGIN DBMS_SQLTUNE.execute_tuning_task(task_name => 'rep_three'); END;
ERROR at line 1:
ORA-00081: address range [0x60000000000A7D70, 0x60000000000A7D74) is not
readable
ORA-00600: internal error code, arguments: [kesatmGetSqlStats:optCost], [], [],
ORA-06512: at "SYS.PRVT_ADVISOR", line 1624
ORA-06512: at "SYS.DBMS_ADVISOR", line 186
ORA-06512: at "SYS.DBMS_SQLTUNE", line 1008
ORA-06512: at line 1The oracle version is Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi. The OS is HP-UX. The version is HP-UX B.11.23 U ia64.
I tried to execute DBMS_SQLTUNE as DWH user.I have granted the advisor,DROP ANY SQL PROFILE,ALTER ANY SQL PROFILE,CREATE ANY SQL PROFILE privileges and DBA roles to the DWH user. The way i ran DBMS_SQLTUNE is, first i logged in as DWH user and i tried to execute the query for getting the SQL_ID for the query. For getting the SQL_ID i selected the SQL_ID column value for the DWH user session from v$session.I kept that query executing and meanwhile i opened another session as DWH user and created the tuning task as follows
DECLARE
l_sql_tune_task_id VARCHAR2(100);
BEGIN
l_sql_tune_task_id := DBMS_SQLTUNE.create_tuning_task (
                          sql_id      => 'b65fj39dkkb9v',
                          scope       => DBMS_SQLTUNE.scope_limited,
                          time_limit => 3600,
                          task_name   => 'rep_three',
                          description => 'Report Tuning');
DBMS_OUTPUT.put_line('l_sql_tune_task_id: ' || l_sql_tune_task_id);
END;
/The creation of tuning task was successful.And i executed the tuning task as follows
EXEC DBMS_SQLTUNE.execute_tuning_task(task_name => 'rep_three');The above mentioned errors came when i executed the tuning task.
I am also adding the query which i have tried to tune
select * from dwh.beneficiary_dim BEN_DIM,
                 (Select adr_dp_id,
               adr_account_no,
               ADR_ADDRESS_LINE_1 || ' ' ||
               ADR_ADDRESS_LINE_2 || ' ' ||
               ADR_ADDRESS_LINE_3 || ' ' ||
               ADR_ADDRESS_LINE_4 as ADDRESS,
               adr_pin_code,adr_phone_no,adr_fax_no
          from dwh.beneficiary_address_dim where adr_type_id = 1) PERMANENT_ADD_DIM,
       (Select adr_dp_id,
               adr_account_no,
               ADR_ADDRESS_LINE_1 || ' ' ||
               ADR_ADDRESS_LINE_2 || ' ' ||
               ADR_ADDRESS_LINE_3 || ' ' ||
               ADR_ADDRESS_LINE_4 as ADDRESS,
               adr_pin_code,adr_phone_no,adr_fax_no
          from dwh.beneficiary_address_dim where adr_type_id = 2) BANK_ADD_DIM,
       (Select adr_dp_id,
               adr_account_no,
               ADR_ADDRESS_LINE_1 || ' ' ||
               ADR_ADDRESS_LINE_2 || ' ' ||
               ADR_ADDRESS_LINE_3 || ' ' ||
               ADR_ADDRESS_LINE_4 as ADDRESS,
               adr_pin_code,adr_phone_no,adr_fax_no
          from dwh.beneficiary_address_dim where adr_type_id = 3) NOM_GUARDIAN_ADD_DIM,
       (Select adr_dp_id,
               adr_account_no,
               ADR_ADDRESS_LINE_1 || ' ' ||
               ADR_ADDRESS_LINE_2 || ' ' ||
               ADR_ADDRESS_LINE_3 || ' ' ||
               ADR_ADDRESS_LINE_4 as ADDRESS,
               adr_pin_code,adr_phone_no,adr_fax_no
          from dwh.beneficiary_address_dim where adr_type_id = 4) CORR_ADD_DIM,
       (Select adr_dp_id,
               adr_account_no,
               ADR_ADDRESS_LINE_1 || ' ' ||
               ADR_ADDRESS_LINE_2 || ' ' ||
               ADR_ADDRESS_LINE_3 || ' ' ||
               ADR_ADDRESS_LINE_4 as ADDRESS,
               adr_pin_code,adr_phone_no,adr_fax_no
          from dwh.beneficiary_address_dim where adr_type_id = 6) MINOR_ADDRESS,
                 (Select rp.requestid as requestid,
decode(rp.value,'ALL','ALL','','ALL',decode(substr(rp.value,1,instr(rp.value,'|',1,1)-1),'','ALL',substr(rp.value,1,instr(rp.value,'|',1,1)-1))) as Name,
decode(rp.value,'ALL','ALL','','ALL',decode(substr(rp.value,(instr(rp.value,'|',1,1)+1),((instr(rp.value,'|',1,2))-(instr(rp.value,'|',1,1)+1))),'','ALL',substr(rp.value,(instr(rp.value,'|',1,1)+1),((instr(rp.value,'|',1,2))-(instr(rp.value,'|',1,1)+1))))) as Address,
decode(rp.value,'ALL','ALL','','ALL',decode(substr(rp.value,(instr(rp.value,'|',1,2)+1)),'','ALL',substr(rp.value,(instr(rp.value,'|',1,2)+1)))) as PAN
                  from disadmin.requestparameters rp, disadmin.requestparameters rps, disadmin.reportrequests rr
                 where rp.parameterid = 'CNAS_PARAM_VALUE'
                   and rr.status = 'A'
                   and rp.requestid = rr.id
                   and rp.id = rps.id) P_PARAM_VALUE,
                 (Select rp.requestid as requestid, rp.value as Type
                    from disadmin.requestparameters rp, disadmin.reportrequests rr
                   where rp.parameterid = 'CNAS_NAME_TYPE'
                     and rr.status = 'A'
                     and rp.requestid = rr.id) P_NAME_TYPE,
                 (Select rp.requestid as requestid, rp.value as Addtype
                    from disadmin.requestparameters rp, disadmin.reportrequests rr
                   where rp.parameterid = 'CNAS_ADDRESS_TYPE'
                     and rr.status = 'A'
                     and rp.requestid = rr.id) P_ADDRESS_TYPE
   where ( 1= case when P_NAME_TYPE.Type = 'F' then
               case when BEN_DIM.BDM_FIRST_HOLDER_NAME like DECODE(P_PARAM_VALUE.Name,'ALL','%'||BEN_DIM.BDM_FIRST_HOLDER_NAME||'%','%'||P_PARAM_VALUE.Name||'%')
                         or BEN_DIM.BDM_FIRST_HOLDER_SURNAME like DECODE(P_PARAM_VALUE.Name,'ALL','%'||BEN_DIM.BDM_FIRST_HOLDER_SURNAME||'%','%'||P_PARAM_VALUE.Name||'%')
                    then 1
               else null end
             else
               case when P_NAME_TYPE.Type = 'ALL' then
                 case when (BEN_DIM.BDM_FIRST_HOLDER_NAME like DECODE(P_PARAM_VALUE.Name,'ALL','%'||BEN_DIM.BDM_FIRST_HOLDER_NAME||'%','%'||P_PARAM_VALUE.Name||'%')
                            or BEN_DIM.BDM_FIRST_HOLDER_SURNAME like DECODE(P_PARAM_VALUE.Name,'ALL','%'||BEN_DIM.BDM_FIRST_HOLDER_SURNAME||'%','%'||P_PARAM_VALUE.Name||'%'))
                            and BEN_DIM.BDM_SECOND_HOLDER_NAME like DECODE(P_PARAM_VALUE.Name,'ALL','%'||BEN_DIM.BDM_SECOND_HOLDER_NAME||'%','%'||P_PARAM_VALUE.Name||'%')
                            and BEN_DIM.BDM_THIRD_HOLDER_NAME like DECODE(P_PARAM_VALUE.Name,'ALL','%'||BEN_DIM.BDM_THIRD_HOLDER_NAME||'%','%'||P_PARAM_VALUE.Name||'%')
                      then 1
                 else null end
               else null end
             end )
     and BEN_DIM.BDM_IT_PAN like DECODE(P_PARAM_VALUE.PAN,'ALL','%'||BEN_DIM.BDM_IT_PAN||'%','%'||P_PARAM_VALUE.PAN||'%')
     and (1 = case when P_ADDRESS_TYPE.ADDTYPE = 1 then
                     case when instr(PERMANENT_ADD_DIM.ADDRESS, DECODE(P_PARAM_VALUE.ADDRESS,'ALL',PERMANENT_ADD_DIM.ADDRESS, P_PARAM_VALUE.ADDRESS)) <> 0
                          then 1
                     else null end
                   when P_ADDRESS_TYPE.ADDTYPE = 3 then
                     case when instr(NOM_GUARDIAN_ADD_DIM.ADDRESS, DECODE(P_PARAM_VALUE.ADDRESS,'ALL',NOM_GUARDIAN_ADD_DIM.ADDRESS, P_PARAM_VALUE.ADDRESS)) <> 0
                       then 1
                     else null end
                   when P_ADDRESS_TYPE.ADDTYPE = 4 then
                     case when instr(CORR_ADD_DIM.ADDRESS, DECODE(P_PARAM_VALUE.ADDRESS,'ALL',CORR_ADD_DIM.ADDRESS, P_PARAM_VALUE.ADDRESS)) <> 0
                       then 1
                     else null end
                   when P_ADDRESS_TYPE.ADDTYPE = 6 then
                     case when instr(MINOR_ADDRESS.ADDRESS, DECODE(P_PARAM_VALUE.ADDRESS,'ALL',MINOR_ADDRESS.ADDRESS, P_PARAM_VALUE.ADDRESS)) <> 0
                       then 1
                     else null end
              else null end );The above query also tries to access some tables from another user DISADMIN. Could you please help me in solving this problem while using SQL Tuning Advisor ? I am the only DBA here.

will the rows really be updated just by using the package?Considering DMLs
SQL> select * from test
2 /
        NO
         1
         2
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2   my_task_name VARCHAR2(30);
3 my_sqltext   CLOB;
4 BEGIN
5 my_sqltext := 'insert into test values (3)';
6 my_task_name := DBMS_SQLTUNE.CREATE_TUNING_TASK(
7   sql_text    => my_sqltext,
8 task_name   => 'my_sql_tuning_task');
9* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> BEGIN
2 DBMS_SQLTUNE.EXECUTE_TUNING_TASK( task_name => 'my_sql_tuning_task' );
3 END;
4 /
PL/SQL procedure successfully completed.
SQL> select * from test
2 /
        NO
         1
         2
SQL> SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK( 'my_sql_tuning_task')
2    FROM DUAL;
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK')
GENERAL INFORMATION SECTION
Tuning Task Name   : my_sql_tuning_task
Tuning Task Owner : TEST
Scope              : COMPREHENSIVE
Time Limit(seconds): 1800
Completion Status : COMPLETED
Started at         : 03/27/2008 05:16:14
Completed at       : 03/27/2008 05:16:16
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK')
Schema Name: TEST
SQL ID     : gwkmgmyj9824t
SQL Text   : insert into test values (3)
There are no recommendations to improve the statement.
-------------------------------------------------------------------------------Adith

Change automatic SQL Tuning Advisor time

Hi All,
can anyone help me in changing "automatic SQL Tuning Advisor" job timingsm because currently it is scheduled during peak hours , i want to change it to evening 6 pm daily.Because during peak hours it is taking more cpu and taking one hour.
Wed May 08 08:00:10 2013
Begin automatic SQL Tuning Advisor run for special tuning task "SYS_AUTO_SQL_TUNING_TASK"
Wed May 08 08:05:47 2013
thanks
Mapps

Hello,
Here's what you can do,
Create a new window to the time you want it to run:
EXEC dbms_scheduler.create_window(window_name => 'YOUR_WINDOW_NAME',
duration => numtodsinterval(1, 'hour'),
resource_plan => 'DEFAULT_MAINTENANCE_PLAN',
repeat_interval => 'FREQ=DAILY;BYHOUR=18;BYMINUTE=0;BYSECOND=0');>
The above window would be in effect from 6 pm to 7 pm.
Then, disable automatic sql_tuning and then re-enable it to run on the window you just created:
EXEC DBMS_AUTO_TASK_ADMIN.DISABLE(client_name => 'sql tuning advisor',
operation => NULL,
window_name => NULL);>
and now set it to run to your window:
EXEC DBMS_AUTO_TASK_ADMIN.ENABLE(client_name => 'sql tuning advisor',
operation => NULL,
window_name => 'YOUR_WINDOW_NAME');

Feature option request - SQL Tuning Advisor

Similar Messages

Maybe you are looking for