[feature request] Editing base states in design mode

Please tell me the the new Flash Builder Burrito will have the ability to edit the base state while in design mode, or at least have the ability to "make same in all states" like in Flash Catalyst.
I really loved the old method where you could make a state based on another one. This added an enormous amount of functionality to the design mode. I realize the Flex 4 state concept doesn't support this, but maybe that could be added back in on an IDE level using state groups.
Anyways, I love what you're doing with Burrito. Keep up the great work!

Thanks, Jim! It is a very blog-like post. (I still haven't gotten around to starting a blog but keep thinking I should.)
I figured the clearer and more thought-out the presentation, the greater the likelihood it might get implemented. Also, I was originally stuck on Scenario 1 as a solution, and writing this helped me see other options.

Similar Messages

Feature request: transplanting architectural state into OpenSPARC

Hi All,
This is a follow-up from our conversation at FCRC/ISCA last week.
I have a feature request for the OpenSPARC RTL, and potentially the FPGA model, which would help researchers experiment with real workloads on OpenSPARC:
I would like to see a process for transplanting checkpointed architectural state of a booted and running T1000/T2000 system (arch. registers, MMU, and memory values) into the OpenSPARC RTL model.
Ideally, this would happen over a socket so the transplant doesn't depend on a particular full-system simulator (e.g., we use Simics/Niagara at CMU, but I expect that many people would like to interface with SAM).
I attempted this on my own a few months ago, with limited success. I wrote Verilog PLI/socket code that 1. slams many of the architectural registers and MMU and 2. replaces the interface in dimm.v with socket calls to a remote Simics instance (non-trivial code, has to reconstruct the phys addr and ECC bits to work properly). Much of this actually worked. I was not, however, able to redirect the core's PC to a new location and properly initiate an i-cache miss.
Perhaps someone with a better understanding of the fetch/thread select stages knows the right combination of registers, valid bits, fetch/miss queue entries could make this work...
Brainstorm:
An alternative approach (which avoids many, but not all, dependencies on the specific RTL revision and is arguably superior to my first approach) might be to write a hyper-privileged "context switch" ASM routine to load architectural state and get the processor boostrapped at a new PC.
This program could be like the usual validation test program, except it loads registers/MMU state from the hijacked DRAM model. Once these values have been loaded into the core, the caches can be invalidated to remove these temporary values (trivial with PLI code), and the full-system memory image can be enabled in the DRAM model.
I can make my code available, if desired.
Thanks!
Jared

Hi Jared,
Thanks for following up on this.
There could be wider interesting in this work and we feel that it makes a very good OpenSPARC based community project that can be hosted on opensparc.net.
If you are interested in contributing the code and taking it forward then we can get it hosted and have right people from Sun help you in making it a successsful one.
I will send you separate email on this topic.
Thank You.
Hi All,
This is a follow-up from our conversation at
FCRC/ISCA last week.
I have a feature request for the OpenSPARC RTL, and
potentially the FPGA model, which would help
researchers experiment with real workloads on
OpenSPARC:
I would like to see a process for transplanting
checkpointed architectural state of a booted and
running T1000/T2000 system (arch. registers, MMU, and
memory values) into the OpenSPARC RTL model.
Ideally, this would happen over a socket so the
transplant doesn't depend on a particular full-system
simulator (e.g., we use Simics/Niagara at CMU, but I
expect that many people would like to interface with
SAM).
I attempted this on my own a few months ago, with
limited success. I wrote Verilog PLI/socket code
that 1. slams many of the architectural registers
and MMU and 2. replaces the interface in dimm.v with
socket calls to a remote Simics instance (non-trivial
code, has to reconstruct the phys addr and ECC bits
to work properly). Much of this actually worked. I
was not, however, able to redirect the core's PC to a
new location and properly initiate an i-cache miss.
Perhaps someone with a better understanding of the
fetch/thread select stages knows the right
combination of registers, valid bits, fetch/miss
queue entries could make this work...
Brainstorm:
An alternative approach (which avoids many, but not
all, dependencies on the specific RTL revision and is
arguably superior to my first approach) might be to
write a hyper-privileged "context switch" ASM routine
to load architectural state and get the processor
boostrapped at a new PC.
This program could be like the usual validation test
program, except it loads registers/MMU state from the
hijacked DRAM model. Once these values have been
loaded into the core, the caches can be invalidated
to remove these temporary values (trivial with PLI
code), and the full-system memory image can be
enabled in the DRAM model.
I can make my code available, if desired.
Thanks!
Jared

[Feature Request] DSL line stats & manual IP settings for PPPoE/PPPoA

After having replaced a Funkwerk R232aw with a Cisco SRP547W I noticed that the software (we're on 1.2.4(003) from Jan 2012) on the Cisco device omits very basic functionality which is even availabe in the cheapest of consumer routers. Therefore I make this feature request in the hope that this may be read by someone from Cisco who could forward this to the development team for consideration for the next software update.
What's missing:
- There are only very basic DSL line stats available, and no DSL line uptime. Only if the URL is changed manually to https://[router ip]/dsldiag.asp then a hidden config page with full line stats including framing errors (unfortunately still without uptime!) becomes available. It is not described in the documentation how to find this page, and I only found out by coincidence. Full DSL line stats including error counter data and line uptime are crucial when diagnosing performance and reliability problems on the ADSL side, and really *NEED* to be available from the menue! Considering that the page already exists (albeit hidden), it shouldn't be too dificult for Cisco to include it into the menue structure and add line uptime information.
- PPPoE and PPPoA apparently are DHCP only. This is a major problem for someone with a static IP and a provider which doesn't do DHCP. It also prevents someone from avoiding using the DHCP-assigned provider DNS servers if the SRP should remain as DNS proxy. As with DSL line stats, being able to set the IP config manually for PPPoE and PPPoA is a very basic functionality that really should also be available in the SRP.
I am also aware that Cisco aims the SRP (Services Ready Platforms) Series at service providers which then give them to their customers preconfigured, and them the lack of the aforementioned functions may indeed be of no concern. However, fact is that the SRP is also sold as an individual product on the open market, to be used with any ISP. And in this environment this functionality is really important. Therefore it would be great if Cisco could include them into the next firmware release for the SRP500 series.
What else:
- Password Complexity Settings: doesn't say what is meant by "complexity" (even if disabled short passwords are not allowed). When clicking on "help" to find out, I get the Troubleshooting FAQ telling me what to do if WiFi doesn't work or there is no dial tone. The help should be fixed to point to the right page, and maybe a small line explaining what is meant by complexity could be added.
- Log Viewer: would be nice if downloaded logs would come with the .txt ending
That's all ;-)

Hello Ben, thanks for the well written post.
To make a formal feature request, we will need to create a service request (case number). I will be happy to do this for you. If you could please gather documentation for me and make a zip package which contains-
Firmware version
When is the last time the unit has been factory reset
Router config file
Basic topology
Who is your ISP
What service you're using (what kind of dsl)
Summary of problem description
Screen shot of where you'd like to see the feature implemented
Relevant contact info including name, business, telephone, email address
Any additional information you feel helpful to make your point
Please send me an email with your Cisco ID and device serial number with this packaged. I will then create a service request and submit for review. My email is [email protected]
In the mean time, here is a great post
https://supportforums.cisco.com/message/3717617
-Tom
Please rate helpful posts

Feature Request - Editable Illustrator Text in After Effects

Hello,
I would absolutely love it if I could convert text from Illustrator to editable text in After Effects. For most animated videos this is a pretty basic workflow that would help out so much. Right now the only solution appears to be having a "guide layer" of sorts with all your text on it, and then copying and pasting the text from AI to AE and then lining it up with the guide layer. Can be a very tedious process if you are working on a project with a lot of text. Most shots are designed in AI before going into AE which is why the text is already laid out.
Thanks!
Remington

Yes, we know that! But we are dealing with projects which have vast amounts of text and elements composed in Illustrator and increasingly InDesign. Maybe the key would be for Illustrator and Indesign to have a dedicated export function to AfterEffects. Not much to ask considering how many people around the planet use this workflow. I would pay for an AE script if it was available.

Preview Mode shows different page than design mode

When I am editing my page in Design mode in Muse CC, the page is approximately 700px long. When I preview that same page within Muse, it adds about 300px to the bottom of the page. There are no text boxes or other content that is causing the shift? Why are my webpages appearing different in the Preview panel than in my Design panel?

Please send your .muse file to [email protected] with subject marked Att:Vikas.
Thanks,
Vikas

Logo Component - Design mode shows the edit component toolbar don't show "Edit" button

I just created a Logo component on my website following the CQ "How to create a Fully Featured Internet Website" guide.
I do create the logo component, edited the jsp page with the following code
<%@include file="/libs/foundation/global.jsp"%>
<%@ page import="com.day.text.Text,
                 com.day.cq.wcm.foundation.Image,
                 com.day.cq.commons.Doctype" %>
<% String home = Text.getAbsoluteParent(currentPage.getPath(), 2);
    Resource res = currentStyle.getDefiningResource("fileReference");
    if (res == null) {
        res = currentStyle.getDefiningResource("file");
    log.error("path is:" + currentStyle.getPath());
%>
    <a href="<%= home %>.html"> <%
    if (res == null) {
        %> Home Page <%
    }else {
        Image img = new Image(res);
        img.setItemName(Image.NN_FILE, "file");
        img.setItemName(Image.PN_REFERENCE, "fileReference");
        img.setSelector("img");
        img.setDoctype(Doctype.fromRequest(request));
        img.setAlt("Home Page");
        img.draw(out);
    %>
    </a>
Then, I created the tag "<cg:include>" in my jsp page, calling this jsp.
After all that, I created the Design Dialog for my logo component, then a "items" node under the tab1 node of the design dialog.
After this, finnaly, the widget node (absParent), under the items created before.
A lot of propertys later, I got my Logo object in the page, but the toolbar with the "Edit" button on Design mode don't show me the "Edit button"
Someone can tell me how to get the button there?
Is some property that I may have forgotten?
Thanks.

Basically, the edit toolbar has the same with as your component, which indeed is problematic for narrow components.
But you can work-around that with a basic CSS hack:
.cq-editbar {
    min-width: 200px !important;
    _width: 200px !important; /* IE6 */
This seems to be fixed in CQ 5.5.

Feature Request: Lights Out Mode / tagging display.

Problem: "Lights out" mode hides tags - need to enable option to allow tags to be seen during lights out mode.
I love editing down photos to selects in lightroom, I love using the (L) LightsOut Mode to set the screen(s) to black.
however, when I do so, it hides tagging data as well. I would like an option (keyboard shortcut) to toggle the display of stars/flags/colors on and off.
Possible solutions:
Flags and stars are simple graphics that could appear over the image or beside/under it in tiny non distracting ways. colours could be the same or perhaps have the outer border turn to the selected colour.
ADDITIONALLY: I would love to see an option to "LIGHTS OUT" the second monitor indipendantly of the main. (this could be done in the second monitor drop down menu)

Originally Posted by Anarion
It's cool that these cards have headphone out but there's one rather large issue with how it that you can't use line out in headphone mode.
For example, if someone wants to use more powerful or better suited external headphone amp, he has to use already amped headphone out if he want best virtual surround/HRTF in games. The headphone out is slightly worse in quality too so it makes no sense to use it in above case.
Some headphones sound just too **** loud when plugged in the headphone amp so line out is only option. However, while that works just fine for normal stereo music, it is not optimal solution for games because the HRTF is way less accurate.
So, how about adding "Headphone mode" tick box for line out (or "Use line out plug instead" tick box in headphone mode)? It would solve various issues and fix one of the most annoying problem with Z/Zx/ZxR cards right now. It should be rather simple (i.e. same settings as headphone out but different output plug) thing yet would make massive difference in usability.
Hi Anarion,
I have relayed your product feature request to the designated department.
Will keep you informed for any updates on this thread, fingers crossed!
Cheers,
Philip-CL

Using DS3 or DW8 to edit php site files in design mode

Thanks in advance.
Kinda new to Dreamweaver and website design. Have a site
being designed in .php. I have downloaded the site folder, access
it in DW, but only Code Mode. Is there any way that I can access
the Design code mode to work with it as a php file.
Do I, can I save it as a web page/html, access it, make
changes, then save it again as php?
Or will I need to deconstruct, cut and paste together back
into the original php file?
This is very important as I will need to constantly update
and add content every day and I want to use the $$ DS3 Adobe suite
to work with the php based oscommerce site being built for me.
Unfortunately, my site developer has no experience with any
Dreamweaver software and is not exactly eager to find answers.
So, with great appreciation, I am hoping that someone can
lead me in the right direction. Too much wasted time and energy
just to find out a yes/no or how and how hard answer to this
question.
Peace,
stress-freeliving

Gary,
While a novice to using dreamweaver or coding a website in
general, I am not an idiot or a novice to the art and structure of
computer, i.e., software programming. I have a degree in
engineering; in the day, I programmed in fortran and associated
languages.
So, what I have been discussing this entire thread and my
overall concern is that I want to change content pages and use a
software package such that it will not interfere with the php
coding of the pages and associated function of the site. Are all
end users required to know code to add content -- if so, we would
have millions of programmers to handle the millions of websites.
What I want to be is an end user who can efficiently add
content to his site. I don't want to have to learn how to use php
instead of continuing to research and learning on other subjects
that I wish to share; specifically, the workings of the brain, how
to learn, how stress and sleep affect our lifestyles and what we
need to do to overcome our natural tendencies towards our/my type
'A' behavior. I have spent approximately 20 hours trying to dig
through this the last 3 days, including a few hours associated to
forums without any answers, even though there have been some very
helpful people spending their time trying to understand my
predicament.
So, I don't want to have someone design a website, primarily
a site that is information and content based albeit with ecommerce
functions that will require me to dig into or learn what the php
code for bold this statement, or make this a header, or insert
image here, define this text box with these parameters, etc., then
take the time to insert those specific codes in articles that I
have already written in a word document that should be able to cut
and paste and post effectively and efficiently in the average
website or blog. Is that unreasonable?
All I wanted to know is can I or how can I use the built in
coding tools in Dreamweaver in this (my opinion not the css,html
site I paid for) php designed site and upload it without wreaking
havoc on the system -- irrespective and outside of catalog listings
which should not have anything to do with pure content based pages.
Am I wrong to think that in the design of a site, that templates
for content pages and even the index page could be designed in html
and leave the database functions to the php?
The problem is that every page has a php extension. Am I
wrong to think that this ecommerce site could have been designed
with css and html that would have integrated somewhat seemlessly
with the $2000 software package???
Wisdom is trying to find the people that know more than you
do on a subject, hopefully experts, and ask them the questions in
the right mode to get an answer such that you can continue
proceeding on the same path or come up with a better plan. That is
what I have been trying to do.
So, as an expert in dreamweaver and ecommerce sites: can you
use non php based programming? Can someone design a site in
dreamweaver using OsCommerce such that an intermediate end user of
the dw can add content using the systems tools and not screw up the
structure of the site -- and do so without having to dig into the
page code every step of the way?
And, yes, I have googled the subject and looked through
OsCommerce instructions, help pages, etc.., to no avail.
It seems that I will take what has been made, complete the
project, then find some other way to efficiently and effectively
produce an ongoing dynamic content site that will sell some things
on the side.
I am trying very hard to communicate effectively with my
designer and maintain a positive, forward-thinking mode to create a
workaround to his design mode to allow me to effectively,
efficiently and without harm add to the site without having to type
a backslash in front of every daggone apostrophe or actually
<br> every carriage return in the 100+ articles I have
already written.
Can I create an html document in dreamweaver then upload it
to the php site? I was told that I needed to then give it a php
extension for it to work. What is involved in this?
Dreamweaver supposedly handles php files? How? Just like
Notepad or any other text editor -- without any of the Tools or
functionss?
And, how can I make changes to the index.php file? This is
FAR from a process that I envisioned when my site definition for
contract said: "Css based, 3 column design for content and
ecommerce that user will add content on continuous basis using
dreamweaver".
As you can tell. This is not what I got.

FEATURE REQUEST: Sticky editing of feed info

I love iTunes 6 on Windows as pod-catching software. It's great. But a minor feature request.... (since I don't see anywhere else on Apple.Com for iTunes feature requests, I'm posting it here).
Most podcast authors seem to do a lousy job of creating intuitive feed metadata information (Artist, Description). And since podcasts seem to be sorted by default on my iPod by Music > Podcasts > [ARTIST FIELD], I always edit the Artist Field in iTunes before I sync with my iPod. I do this by selecting all items in a feed group, right clicking, choosing Get Info, and editing the Artist field to something short which makes sense to me.
However, this edit isn't sticky. When new items in a feed are downloaded to iTunes, they have the original Artist field. So I have to edit this a lot.
What I'd like is to be able to edit the Info of the feed once in iTunes. Then, every time a new item is downloaded to that feed in iTunes, I'd like iTunes to go ahead and edit that item's info to match my sticky feed setting. This way, I only need to edit the info once when I add a new feed, and each item subsequently downloaded will inherit those settings.
Make sense? A "power user" feauture, I'm sure. But it'd be nice....
Dell Dimension Windows XP iTunes 6, 20GB iPod
Dell Dimension Windows XP

Can't be done currently. Interesting idea, though.
However, I've found that podcast creators tend to be pretty responsive to criticisms along these lines. I've had this same problem with some podcasts, and after I mentioned it to them, they started tagging their podcasts appropriately. Some of them even started adding "album art" after I explained how it would show up on newer iPod's when playing the track, if the iPod user uses iTunes.
I'd email the podcast author and let them know what's up. This is generally a better long term solution anyway, as it helps everybody.

Feature Request: Destructive editing with AUs in Sample Editor

I would like to be able to apply edits destructively in the sample edit window with Audio Units like we could in Logic on MacOS9 (which used AudioSuite plugins). This is an ongoing request, year after year, among veteran Logic users. In every update it is ignored. The feature requires no redesign of the sample edit window, just another menu sub item droplist. While the bounce in place feature is a welcome addition, it is not a replacement for this feature that was removed in the migration to MacOSX and has been sorely missed ever since.
Here's just one recent sentiment from a user on the NYC Logic Users Group:
"I recently changed over to Logic from Pro Tools and I really miss this feature! For handling plosives and de-essing small fragments."
I also know a very prominent producer who boycotted Logic 8 and 9 for this reason alone. While I would never do that (since I happen to love all the new features and feel comfortable with the workflow of Logic 9), I sympathize with this person's frustration over the lack of this feature. I find myself constantly in the position of wishing I had destructive editing back in my Logic tool belt.

With all due respect, I personally cannot stand soundtrack. A lot of effort was put into the app that should have gone into Logic. As you allude to, I can trigger that Logic keystroke to open any sample editor, which is what I do. I just want the functionality back that was taken away from us many moons ago. I'm not looking for workarounds. This is just a simple feature request. But thank you for the suggestion.

How to edit text in design mode - i.e get an I cursor instead of arrow

DW CS6 This is a very basic unclear on concept question. I normally work in code view and have no problems. Sometimes there is a large block of text within a paragraph which is in a div.
I would like to correct a simple typo or insert some more text directly from the design mode display. However, almost all the time, when I click on the spot I want to modify, the cursor remains an arrow and the entire div gets a yellow border. I still have the select arrow, not the vertical bar I need to edit.
Sometimes I seem to stumble onto the right set of clicks and get the edit bar.
Thanks for any suggestions.

Design View can get pretty cranky when your code has errors.
Check the validator at http://validator.w3.org and make sure you're working with clean code before resorting to wiping preferences, config folders or reinstalling.
If your code is clean and it's still not allowing you to click your text in Design View, you may have a z-indexing issue. I notice on pages that use a lot of positioning (APDivs) you can accidentally cover up your text boxes with blank/transparent areas of other elements and cause problems when trying to access that text at a later date.
It's all guesswork though without seeing your actual page.
Could you post a link?

Feature Request: Please fix text editing

Hi there great Adobe Team!
I am usign your product for rapid web prototyping. Often times ontop of my interface drawing, I use the text tool to write some text, and then put a nice colored background box behind it.
The problem I am facing is this:
It seams you have mapped the control-left and control-right keys to change the spacing of the letters. Unfortunately, this is a common mapping used in windows to jump to the next word!
Your current key mapping assignment makes text editing quite troublesome!!!
Can you please change these key maps in your next update?
Thanks very much
Sincerely yours,
a developer that uses Fireworks and Adobe Cloud everyday!

TokyoFire,
Hi! This is a user-to-user forum. I recommend that you submit your feature request directly to Adobe using their official Feature Request and Bug Report Submission form:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
For future reference, it is possible to change many of the keyboard shortcuts in Fireworks using the Keyboard Shortcuts dialog (under Fireworks > Keyboard Shortcuts). Here, you can choose from several different sets or create your own customized set. Within each set, there are three categories: Menu Commands, Tools, and Miscellaneous.
Unfortunately, none of these categories seems to include the shortcut to which you're referring (for text kerning). To expand upon your suggestion, I'd recommend that Adobe consider adding this missing shortcut to the Miscellaneous category, or create a new category called Text, where users can access and modify this and any other missing, text-oriented keyboard shortcuts.

(Harmful) edit not visible in WkiHistory in "Feature Requests"

Maybe this should be a discussion.
I've just removed a porn link from the Forums table in "Feature Requests for..."
The disturbing part is that the edit I removed first appeared in Rev.233, but was not visible in the WikiHistory. I can construct a lot of scenarios here (but I won't!) and all of them are scary. I cannot construct a scenario with a "harmless"
rating.
I'm only a newbie, it's not for me to take this further. But I am sufficiently experienced to know that a revision of best practise access control should be undertaken. Yesterday would be a good time to initiate it.
Gordon.

Hi Richard -
Thanks for answering. It's the comment to the edit that's missing.
I believe (I have not tested) that blank comments are not listed as part of the edit, so all we get is the user's edit listing, but no clue of what was done in the edit.
I draw your attention to Wikipedia, where all parts of the edit are summarized in the History List. I don't believe the Technet Wiki History needs that amount of data, but OTOH that is the sort of thing computers excel at. But I do believe Technet
Wiki should record blank comments as well as filled comments. Maybe a blank comment could be filled with the first 10 or 20 words of the edit?
Gordon.
Okay, please add the feature request to the Wiki section:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools.aspx#TechNet_Wiki
Hey, thanks for your edits here:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools/compare.aspx?revB=0&revA=234
You removed a dead link and a spam link!
And the history tab showed me all that!
We're actually thinking of migrating to the Wikimedia platform. Then that would give us your feature request. But it's best to capture it on our list so we don't lose sight of it.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Feature Requests for BlackBerry10 OS

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This thread has been closed and is continued in this new thread here:
Feature Requests beyond BlackBerry OS10.3.1
Please click on that link.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Let's use this thread to list BlackBerry10 OS feature requests. There's nothing official to this thread, but one never knows who might view it and get an idea or two to move foward.
Please let's keep it to feature requests with simple short statements and comments, in this manner:
1. Ability to lock the volume keys (since they are so easliy pressed when retrieving from holster)
2. Personal distribution groups Address Book
4. Add BBM Group icon to home screen
**This thread is not for bug reports (i.e., the calendar glitches when I set the date) or for debate or discussion of the worthiness of a feature request.
So, what would YOU add to BB10?
What do YOU need to make the OS platform work better for you?
Here are the collected feature requests as of 04 April 2013. Thanks for Ride_The_Sky for helping collect these from this thread.
There are listed in no order, just as collected.
Ability to lock the volume keys (since they are so easily pressed when retrieving from holster)
Personal distribution groups Address Book
Add BBM Group icon to home screen
Way to add line carriage to BBM messages
Why doesn't the most used name come up first? <- In latest OS, there is another line with most common contacts, but when typing it won't provide most commonly emailed contacts.
Bring back the option "Send As" or include this option in "Share"
Enable word wrap when zooming in to emails and messages.
Import Distribution lists from Outlook on your desktop to your Z10?
*The option* to always show the hub main screen when opening the hub, so when peeking it always shows the hub even if you leave it in another screen.
Offer Balance without BES to have two workspaces in device.
Delete on Server/Device/Both
Delete on Server but Keep on Device (This is going to be tough since EAS does not work like POP, using POP you can do this by deleting on server after sync)
Auto power on/off or Auto Do Not Disturb / Scheduled Airplane Mode / Scheduled Silence Mode / Scheduled Custom Profile
Default Currency Option
More options to lower data usage in e-mail (Headers Only / Roaming Profiles)
Snooze a notification/reminder for more than 5 minutes.
Customized Notifications
Disable certain accounts to stop receiving email or notifications from them temporarily to avoid data usage.
Way to delete recent pictures, videos.
Office Hub customization, sorting, editing, etc., on the fly.
Select which contact groups to sync, and ability delete all contacts.
Larger text select tabs
Add more options to dropbar.
Improve browser functionality and display, add customization and management of Bookmarks.
Calendar in Landscape mode
Option to Disable shutter sounds in camera.
Auto BCC option
Multiple appointments in lock screen, not only next one.
Increase email check frequency, custom minutes (possibly battery concern, most accounts use push nowadays)
Ability to hide "texting" numbers such as Work, home, etc that aren't able to receive texts
Ability to have multiple mobile numbers, such as mobile1, mobile2, for people with more than one cellphone
Ability to have multiple work numbers, home numbers, etc
Ability to have option for actually creating "custom" names for phone numbers, emails, VOIP,
Ability to have multiple WORK emails fields for same contact ...
Ability for a custom note field for each contact, for misc information such as store hours, reference numbers, business account numbers,
Ability for filter or unselect specific Twitter, LinkedIn, Facebook contacts so they all don't appear
Ability to "share" contact info with someone else ... like a vcard or the like
Ability to have custom Individual text and ringtones for each contact set within contacts app
Vibrate option for Alarm
Mail Filters for Priority mails.
Option to block ringtones from music app (i don't see ringtones in my music app, I guess poster refers to custom mp3 files)
Swipe down to close, up to minimize (but some apps have menus associated with swipe up gesture)
Swipe half way up the screen to minimize an application to an active tile.
Swipe it all the way up the screen to close the application.
Playbook app switching gestures (swipe sideways, I guess this won't work since there are other gestures associated with side-swiping)
Lock screen with gesture (or maybe they should just add a button on home screen, somewhere on top or bottom)
Airplane mode on status bar options.
Option to customize status bar with select Settings/Options.
Colors for Hub!
Face recognition for camera, being able to associate contacts with faces or pull info from Facebook, etc.
Weather info on Lock Screen (if I may add, and constant info on top status bar, simple temp info should be enough)
We need groups back in contacts please.
Import text messages in various formats from various systems.
Sorting and Ordering of the way contacts are displayed depending on account.
While editing an entry in calendar, notification about a recent call may cause loss of data in that entry.
Location for Calendar entries and be able to see it on the map with a tap.
Being able to see multiple pictures from an email by swiping left and right to see next/previous without having to reopen (I must say the same thing is needed for App World, why can't we just scroll through screenshots??)
Multiple flags or ability to set a flag date, associate with a reminder.
Move people from TO to CC or BCC easily (If I may add, also ability to backspace to delete a contact without having to tap the X in blue box).
Option to add favorites to Hub for easy to reach contact management (I think it is same as going to contacts and choosing Favs)
Being able to answer and make calls when the phone is locked.
Add more colors to LED notification (I think they are there now, orange, green, red so far, did not see blue, I don't think blue is needed in my opinion)
Change the way to add date and time for appointment, rollbar is too slow and too sensitive.
Dismiss and Snooze buttons for Alarm to be different colors, larger, easier to notice.
Make it easier to order world clocks, instead of the order they are added.
Alarms based on days/schedule.
Easier way to get to the bottom of e-mails (I think it scrolls pretty fast, I think poster wants "B" shortcut)
Easer way to get to the bottom of web pages (same as above, space or B shortcut?)
Add option to ask if you really want to dial, instead of just dialing right away every time a phone number is clicked/tapped on.
Ability to resize image before attaching to an e-mail.
More than 30 days email sync on device, please!
Make BB boot up slower, so we can actually get to do something else while waiting for it to start!
SSH client would be nice.
Another keyboard like Swipe (honestly, I have never typed faster in my life on any other on screen keyboard, Z10 keyboard is awesome!)
Volume lock/unlock button on demand.
Auto Run app on device boot up.
Lock or Pin apps.
Ability to run background apps (Google Talk is running in the background, or it is tricking me, I don't know but I am getting messages from it when it is shut down on BB10, I hope they do Skype the same way)
Ability to have multiple documents of same type open at the same time (tabbed docs2go)
Calendar sharing of BB10 users in the area/company/group.
PIN Messaging to return.
Preview e-mails, calendar and other information on lock screen (privacy?)
Way to clear anything in any "Recent" menu, videos, pictures, etc..
Ability to hide apps, docs, pics, videos, folders, etc..
BBM Group Picture notification.
Support WhatsApp more.
Another tap for important numbers (Favorites work for this, and on top of speed dial)
From Call Menu when going into contacts, it should be ready to search with keyboard out.
Option to customize volume key to act as page up/down, etc depending on app running.
Red star in app world (means you need to run Updates, just refresh and check by swiping down from top)
Better headphones with the phone (hey, we didn't even get any!)
Better night shots in camera (hardware or software improvement?)
Ability to choose which address book to sync with bluetooth car.
When app is opened from a folder three or four pages into apps list, we hope the screen can go back to that spot when the app is closed (sadly it uses active frames at the moment)
Change acceptance of auto corrected key, instead of space key, make it something else (actually, you can just backspace to un-autocorrect it back to what you typed).
Ability to load certificates (X 509 S/MIME and/or PGP/MIME) from a computer
Ability to sign and or encrypt emails (POP3) before sending (As in MS Office Outlook)
Ability to receive and recognize signed and or encrypted emails (POP3) (As in MS Office Outlook)
Add a password/certificate manager that doesn't require manual copy/paste
Ability to encrypt the memories Device and Media of the Q10 like it is done for the BB9900
Ability to encrypt selected folders (preferably by Private Key)
Ability to create Self-Decrypting Archive like in PGP
Ability to delete email-messages by group as an alternate option to one by one
Opening Video-chat to non-BBM users (Skype for instance)
For above encryption request, SecuSmart was suggested...
Renaming the file without extension can break the file or hide it from pictures list.
Wallpaper scrolling sideways.
Standalone e-mail app (not sure how different it is than choosing emails-only for hub)
Different colors or small tabs in different colors for different accounts in Hub.
Share webpages with smart tag (I think you can just create it by pasting the URL into create QR)
Application management (being able to see which app takes up how much space, etc..) CPU/Memory/Battery Usage/Data Usage/Storage Usage in more details
Custom vibration options.
Move Send button in BBM to avoid accidental submission of message
Forward As… SMS, MMS, EMAIL from one to another.
Send SMS to new numbers (I think you can still do this from call log)
Single key press to change profiles.
Insert a picture into an e-mail. (I think he means into the body of email)
Turning off links of contacts (I think poster did not have multiple accounts, actually BB10 goes ahead and adds all new contacts into all address books in all accounts without user permission.. Create a contact in Hotmail? Gets copied to Gmail.. and then linked, terrible implementation in my opinion)
Presets for browser bookmarks, faster access to bookmarks. (My suggestion was to create a home screen, select 12 icons 3x4 or 16 icons 4x4 as home screen/start page)
Being able to allow flash based on website/url/server.
Ability to adjust different sounds/volumes for different BBM users/groups
Better Voice Dial and Voice Commands (shorter and easier operation)
Ability close one or all web pages/tabs, add "Close All" button.
Call Recording
Faster way to delete e-mails, such as file icons next to e-mails, or Swipe to Delete! Swipe to File!?
Customize email signatures with formatting.
Phone to stay on screen (dial pad always available in panes)
More Options for Clock.
In Playbook we can have a single character password, why not on BB10? "too short" well it is my decision, isn't it?
There is no way to go next/previous while reading an e-mail. Please add these functions.
Add to the e-mail client, Next Unread / Previous Unread.
E-mail or Hub should have more buttons at the bottom in landscape mode. Why keep only three (or four in e-mail view) buttons when you have the real estate. It would be extremely handy if you allowed users to edit which buttons should go at the bottom. Next Previous is really needed while reading an e-mail. For example I would love to add "File" button at the bottom as a shortcut instead of forward, I rarely forward, but I file all the time. Maybe allow users to have two row of keys, add next/previous/unread. Or it could be done with a gesture. How about swiping the account name (top blue bar while reading e-mail) left and right?
When you create a new contact in BlackBerry, it gets synced to all accounts on the Hub. There is no way to limit the new contact to a specific account.
Sometimes when you file an e-mail to a folder, it stops and waits few seconds with no message. Even when it files immediately, there is a confirmation message that takes time to appear and disappear, and the folder list does not disappear automatically.
Messages filed automatically by server using server side filter rules are still showing up on Blackberry hub/inbox. In older BB versions the filtered messages did not show up in the list, filed messages still did.
When you filter your e-mails using Filter / Unread function, new unread e-mails do not show up until you close the filter and re-open. It won't just keep refreshing your screen with unread e-mails. Can BB add a button to the hub "Unread Hub" so when hub shows 8 or 2, you can actually see unread items easily without having to through so many taps.
Native BB QR scanner (Smart Tags) does not work with barcodes (it only scans with no way to use the information). There is Open In function but it doesn't work properly.
We need to add more customs search providers, and be able to add custom search strings/wildcards. For example currently there is Google, Bing, Yahoo, Foursquare, etc..
I hope BB introduces the ability include more standard & custom searches, IMDB, PriceGrabber, Ebay, Youtube, XYZ Forums, ABC Newspaper, 123 Database, Etc.. Most sites nowadays provide search string in their URL Search=?* etc...
None of the Battery apps can access system settings to add a battery icon to the top. I wish battery percentage was there.
There is no way to check carrier/mobile signal strength.
Blackberry, please add the date and carrier / SSID info to the top. Sometimes we just want to glance at the top to see the date without having to swipe.
Please bring back keyboard shortcuts. Since we can easily swipe up to bring the keyboard, just add keyboard shortcuts in e-mail, phone (true speed dialing, dialing by word?), and browser, etc.. if possible. I could always call 1800SOMETHING# now I have to look up the number or use dial pad.. Please bring it back.
Camera zoom function needs to be fixed, also please include option of fixed focus by tapping on the screen to focus. The auto focus in video is focusing in and out to various objects all the time. Stabilization feature also causes tearing/ripples, I guess it is good if you are stationary. Or use Volume Keys to Zoom.
Please allow more than 12 icons in an icon group/folder, I hated Apple for limiting apps per folder, please fix it.
Auto ON/OFF feature is not there anymore. BB should consider Auto DND (DoNotDisturb) or Auto Silent/Airplane modes instead.
Please find a way to stop the music app from automatically starting up every time it connects to bluetooth like car audio. This is very annoying.
No Panaroma mode in Camera app, why not? It is very easy to incorporate. This could be a nice addition to next release, and easy.
The text selection grips needs to be a little bigger, sometimes I cannot see where I am moving them, they work better in Playbook, nice big tabs.
Call Functions, before answering a phone add sideways gesture functions, like swiping right will forward the call, swiping left will answer with a test message, etc..
Or there should be a way to reject the call without sending it to voice mail, phones had this function a decade ago, I don't know what happened to it.
We used to be able to see the "History" without having to save the contact. Now I don't see any way to "View History" of a certain phone number, it just keeps adding
them as individual entries to the log. Now I can't see when was the last time they called me, how many times we spoke which day, etc... I loved this feature in BB5.
Where is BB Traffic? Where is BB Weather, without having to run an active frame? It will eventually disappear if you run too many apps. I liked a little Icon that shows me what the temp is, instead of running a whole app.
There is no Skype. This day and age with all other platforms having it, please either get skype (Microsoft) to cooperate, or open up BBM to other platforms. If necessary, pay Skype to develop the app, then charge BB users for the app. Most will gladly pay.
Can we tap and hold on an active frame to pin it, or can we pin two favorite apps between Call and Search & Search and Camera buttons in the bottom bar? How about Close All running Active Frames app to quickly free up ram?
I hope next generation devices have two speakers or speaker that is facing forward. When playing games or watching videos in landscape mode, I find my palm muting the speaker. I have to hold it gently with fingers to have a gap in between, something I don't want to do when I am on the subway or bus.
Blackberry Maps should have a Zoom In/Zoom Out buttons, sometimes using it with one hand, it is impossible to zoom in and out. (Zoom in is OK but we can't zoom back out)
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Solved!
Go to Solution.

- ability to choose deletion of an email on handset only
- desktop software working with all older BB's allowing drag and drop type of transferring data, contacts etc. (BB link doesn't recognize my old Storm)
- auto power on/off
- contacts syncing with yahoo & Outlook (almost two weeks trying to work around it and no luck)

Edit code while in debug mode in CC

Hi,
I have just upgraded to Flash CC, and can no longer edit code while in debug mode. It appears the code window becomes read only while debugging. This is problematic because I often find it very useful to copy in variable names from data visible in the variables display portion of the call stack. This is very helpful if I have made a typo in my variable names, or if I am reading out data from a network request and I don't know the variable names ahead of time. Is there a way to unlock the code window so it does not become read only during debugging?
-David

Hi Amy,
I appreciate that you are trying to help, and from a purely coding standpoint see the advantages to Flash Builder IDE over the Flash Professional IDE. Although personally I am a Visual Studio kinda guy... However I am working with a fairly large code base, (we are a small game studio that has been working with flash cs4, 5, and 5.5 for the past 5 years) and while nobody that works for me is crazy enough to put code on the timeline, we do have a significant amount of UI elements, dialogs, and layouts that are designed in the Flash editor with logic in classes that extend those elements. Now correct me if I am wrong, but it is my understanding that you cannot build FLA files from flash builder let alone have them link with the classes that are set to extend them in Flash Professional. The move to CC actually gives us access to Flash Builder - something that previously was an additional $500 a seat. While it may make sense for us to use in the future, for now I am faced with the issue of the new Flash CC has removed the ability to edit the code while debugging. I was hoping there was a setting or a hidden option to turn this very unnecessary change off, I wasn't really asking for a critique of my IDE choice.
-David

[feature request] Editing base states in design mode

Similar Messages

Maybe you are looking for