Feature Request: Get Develop Preset by Name

Presently, you have to already have the preset ID to get a develop preset using any other method besides searching recursively through the develop preset folders...
Ditto for collections...
R

Cancel this request! - I just figured out how to change develop settings by going through a plugin preset in ram instead of a regular preset on disk - I'm a happy camper.
Rob

Similar Messages

  • Feature requests: Getting Here Drive to a baseline...

    OK, Here Drive works reasonably well and stable with the feature set it has, but it still has a long way to go, just to be close to par with e.g. my Garmin Nuvi 350 bought 7 years ago, or even an old app like Mapopolis for Windows Mobile, also available 5-6 years ago (but now gone broke)... Is it possible to soon get at least get to a baseline that makes it usable also for longer international travel, e.g. going on summer vacation across Europe vs. just being useful for some local travel? This would require:
    Search by categories of POIs rather than having to know it by name, e.g. find nearest hotels, gas station or place to eat (restaurants not even available today in the map overlays!) - sorted by distance
    Find POIs along the route, e.g. within 2km of route rather than based on current location, again to know when you will pass e.g. the next gas station (super critical when driving on vacation across Europe)
    At least 1 via point, so you can plan a stop over and still know your arrival at final destination.
    Planning mode for routing by setting both a start and destination rather than all routes calculated must be from current position
    Telling whether destination is on left or right side of road
    That would bring Here Drive to at least the entry level of the cheapest dedicated navigation systems. Some additional features that would move it a little up the stack ranking includes:
    Traffic information displayed and taken into account for route suggested (for a mobile unit with data traffic capability I would actually consider this a base requirement to just be minimally competitive with the cheapest navigation systems)
    Speed camera alerts
    Multiple via points
    Offline planning of full route and save/import of routes
    Street names spoken in more languages
    Lane assist
    Narrowing searches by country, city name or postal code
    Voice recognition for some of the basic commands while traveling, e.g. nearest gas station
    Finally - would it be possible to get the Danish speech updated? It's horribly incorrect from a grammatical perspective (sometimes bordering embarrassing) and the voice used is also not very good - it's a bit strained and shouting, rather than a calm soothing voice.
    I hope some of this can be prioritized - that would allow be to finally get to just ONE device for everything in the car - music, navigating and obviously calling.
    Sincerely,
    Allan Hvass

    Funny - after my testing out of Nokia Drive+ and realizing all the limitations listed compared to an OLD Garmin Nuvi AND no glimmer of hope or response for a month, I actually went out and bought a Nuvi 3490 instead. I'm currently not using my Nokia Drive for any navigation...
    I could see myself start using it again if some of the features, incl. traffic information being part of routing decisions making it's way back. But for long haul navigation, everything needs to be there, and still the Nuvi 3490 wins hands down. And since that is now already paid for also with life time updates to maps and traffic info, it now requires a signficantly BETTER navigation app to bring me back.
    One thing I would like to see though that will make Nokia my most used daily navigation tool is the Nokia Commute app for Copenhagen area. That apps approach for short haul routine routing is really attractive.
    I originally went for the Nokia Lumia series over competing WP8 vendors due to the strong software add-ons with the mapping functionality being a key factor. There's still many other elemeents that just make Nokia a bit better, but the one I thought was the biggest turned out to not be enough, and that has now put aside as I got a better navigation system than any phone can currently offer - thus making the playing field a little bit more level across WP vendors. Nokia needs to work MUCH harder and faster, if they want to differentiate themselves on mapping / navigaiton. Granted there's other areas like photo quality, social apps, build quality, accessories, etc. I would like to put Nokia Music in there as well, but that has never launched in Denmark after 3 years...
    Sincerely
    Allan Hvass

  • Feature request : get latest room function in server to server apis

    Hello,
    I would like to be able to get the latest created room, check the number of users in there already, and if there is still place send the user there or create a new one.
    At the moment I can achieve this by either
    1.make a listRooms call and then a getroominfo for the latest room, but if the number of rooms become large this may slow down the app.
    2. I could also store the room stats on my server.
    What do you think?

    Ok thanks

  • Feature Request: Clip Develop Adjustments at Min/Max instead of Default

    Presently if a develop adjustment strays a bit left of min or a bit right of max it just returns to the default - it would be far better if a setting is driven past maximum, to just have it stay at the maximum - likewise for minimum...
    Rob

    Hello,
    I'm working on the similar requirement. same bursting the program based on the TRX_NUMBER. Does the bursting happens?
    Thanks
    Geetha

  • Feature request: get bytes sent and received

    Is there a way to get the number of bytes sent a received? For other stats, I use code such as:
    com.tangosol.coherence.component.net.Cluster cluster = (com.tangosol.coherence.component.net.Cluster)
                        ((SafeCluster)com.tangosol.net.CacheFactory.ensureCluster()).getCluster();
    PacketPublisher publisher = cluster.getPublisher();
    PacketReceiver receiver = cluster.getReceiver();So, I'm looking for a way to get bytes transferred info out of the publisher and receiver objects.
    Thanks,
    Matt

    Matt,
    First, I'd like to underscore the fact that all this is not a public API yet and may change without notice.
    Currently, you can get the number of sent and recieved packets:
    publisher.getStatsSent();
    receiver.getStatsReceived();To transalte this into bytes you'd have to factor it by the value of "cluster-config/packet-publisher/packet-size/preferred-length" element in "tangosol-coherence.xml" descriptor.
    Gene

  • Feature Request: Right-Click Zoom (like in Audition)

    You can hold down the right mouse button down, select an area, and release to zoom to that region in Audition.
    Can we please have this feature in Premiere Pro CC? It would be a huge timesaver, and it won't add any bulk to the interface (in terms of height or width of components).
    Imagine zooming into the exact section of the timeline you want with one click & drag of the mouse! It works so well in Audition, I really think it's time to bring it over to Premiere (and After Effects would be cool too, but I'd have to request it there, probably). Navigating the timeline is one of the timesinks of editing. This feature could drastically speed that process up.
    Does anyone else want this as much as I do?

    Honestly, I feel like feature requests get ignored, unless they have more than one person's support behind them.
    Not sure about that. We get Features that no one ever mentioned, discussed or asked for.
    Its called 'Feature Creep' and I think there is one from last update being discussed in a Forum near you... right now. 
    [Text formatting corrected.
    Message was edited by: Jim Simon

  • Feature Request:  Audition

    How about making the wave form view on the same screen as the multi track view.  This, so you can select and drag events or regions from the waveform view window directly into a track on multi-track.  Sony Vegas has had this for years with their "trimmer" on the same screen as the multi track.  I've never understood the split personality of the multi track view-waveform view.  I've been working with digital audio since the SAW pro days.  Make it an option - for those who are accustomed to the status quo.  I still prefer using Vegas for building radio spots for that reason.  Thanks

    Honestly, I feel like feature requests get ignored, unless they have more than one person's support behind them.
    Not sure about that. We get Features that no one ever mentioned, discussed or asked for.
    Its called 'Feature Creep' and I think there is one from last update being discussed in a Forum near you... right now. 
    [Text formatting corrected.
    Message was edited by: Jim Simon

  • Feature Request:  iTunes to merge the "Song Name" & "Artist" fields

    This is a feature request that i would like to see in a future release of iTunes. The option to merge the "Song Name" & "Artist" fields together. This would be a very valuable option when surfing your iTunes Library thru your iPod, Front Row, or Apple TV.
    Let me explain:
    Not everyone knows at the top of their head who sings a particular song. This is especially true when someone other than the owner of the iTunes Library is browsing through it.
    Let's say that I want to browse my ENTIRE music collection all at once. The easiest way to do this, is by browsing thru the "Songs" list because it creates 1 massive list displaying ALL the songs in the library, without having to jump into different fields. The current problem with this, is, it only lists the name of the song. There are 2 problems with this philosophy. #1 - You must know who sings the songs to have any chance of making this a useful option because the artist is not displayed. #2 - It puts them in alphabetical based on the song name. Once again, not a very useful way to make this option really functional because you will have the Artists all over the map! Keeping the Artist's songs together makes it a much more feasable option.
    The solution, I feel, would be to have iTunes create an "Option" that would allow users like me to make iTunes merge the "Artist" & "Name" fields together. Make it an option so that users who do not see the benefit to this, would not have to use it. By doing this, I could now surf my ENTIRE collection via the "Songs" field in a very logical approach.
    For an example, let's take a song: Artist - "Def Leppard" & Song Name - "Pour Some Sugar On Me". By clicking this option, when browsing thru the "Songs" field, it would now display as: Def Leppard - Pour Some Sugar On Me. This allows me to browse my ENTIRE library while at the same time, keeping "like" songs together, and making it very easy to distinguish whether or not it is a song I want to select. By knowing that Def Leppard is a Rock Artist, it helps to distinguish the song.
    I work for a custom AV integration shop that has put hundreds of music servers into homes. We have been teaching our clients the benefits of this for some time now, with great feedback. The only problem presently, is it requires the users to have to re-edit every single file by putting the Artist's Name & the Song Title into the "Name" field of iTunes. Very time consuming! As well, because you also have the "Artists" name entered in the "Artist" field, you get Front Row displaying the "Artist" name twice, once in the song name, and once in the artist's field.
    Any feedback would be welcomed.
    Regards,
    Trevor

    You might be able to get where you want using Chaotic Software's MediaRage. It can automate and batch tag editing, including building a Title tag that combines Artist and Title and, to possibly address you other problem, blanking the Artist tag.
    MediaRage is not expensive and it is very powerful, you can even define regexs for how to parse tags.
    HTH. - Tom

  • Feature Request "Copy of column-name" in 2.1.1 not working

    Scanning all the feature requests added to 2.1.1, i came across to the following one:
    Title: Copy of column-name
    Description:
    after getting the query result it would be greate if we can mark the column-name and the copy the name of the column to the clipboard for further use (e.g. select colum_name from table ...)
    Comment:
    Try 2.1.1. You can drag a selection of columns to the worksheet. If not, then please provide more detail in future request.
    Status: In Release 2.1.1 ;
    Now i've tried few times to drag the column from the query result into the worksheet but it doesn't work. The only thing which works is to change the columns orders in the grid result.
    Anybody experience the same result?
    Dani

    @Raghu
    I'm already aware of this and it's working but the downside is that it copies the cell value too which i don't see the point.
    If i want the cell values than i can export or copy them.
    The request description was different though.
    @K
    Unfortunately you can't drag the column name from the navigator or result grid. Would be nice if it would.
    Is anything else i can do to get this fix or are you gonna raise a CQ for this?
    Regards,
    Dani

  • Feature Request.  Please, please, please make file name a sort option.

    I find it a glaring omission that one cannot sort by file name in
    PE or Organizer.

    We're pretty much just users here. You should post your request using Adobe - Feature Request/Bug Report Form.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • SQL Developer Problems and Feature Requests

    I’m in the process of comparing TOAD to SQL Developer and noticed the following bugs/features in SQL Developer:
    1. An error message is correctly displayed when a database password has expired, but there isn’t a way to go back into the database and change the password for that account. Can this critical feature be added?
    2. There is no option to connect as sysdba or sysoper.
    3. In the “New / Select Database Connection” window, I get the following error when double clicking on an existing connection defined using a TNS Network Alias: Status: Failure – no ocijdbc10 in java.library.path. Any ideas? Connection was initially defined using the Network Alias button. I can connect under the “Connections” window, but not in the “New / Select Database Connection” window. Any ideas?
    4. When displaying data in a table, the filter is not user friendly. You need to enter column names and the correct SQL syntax. It also does not allow you to cut and paste in column names. It would be very helpful/useful if it was more user friendly (GUI based) such as how Sorting is done and/or how it is done in TOAD.
    5. When viewing referential constraints on a child table, it shows you information on the parent, but not if the parent is a child to something else. If you were a parent, it would be nice to see all child and their children’s children. TOAD does a nice job showing parent and child tables via a tree structure.
    6. Comparing metadata between schemas would also be a very nice feature.
    I’m not sure if this is the place to post this but thought I would start here. Any feedback would be appreciated.
    Thanks,
    Ken

    1: You can always right click and have it open an sql*plus window and that will prompt for the new password. But I do agree that support for this should be built in.
    2: This is a developer tool.. Use OEM for the dba stuff. I think that the worst thing that could happen to SQL Dev is to try to become everything for everyone like TOAD tries to.
    3: Search the forum. Other users ran into this and I believe there is a workaround.
    4: I like the current filtering on tables. So much simpler than most tools. I do agree that maybe there should be an advanced button with a filter builder and agree that column names should be copyable but would cringe if the free-form field disappeared. How many other tools can you write an inline query into the table viewer? Great feature IMHO
    Eric

  • Feature Request: Ultrabeat: Load Sample auto copy file name to Drum Voice

    Feature Request: Ultrabeat: Load Sample auto copy file name to Drum Voice
    I wish that when I load a sample into a drum voice, that it would automatically copy the name of the sound file I'm importing to the drum voice minus the extension. If I were importing BD01.wav I'd like for the drum voice to display BD01. As it is, I have to import the file, then name or rename the drum voice to BD01. When importing large quntities, this becomes a giant pain, and I'm looking for anything programmatic that could save me a load of time. When I think of all the time I'm going to waste...and if you multiply that by all the number of users...that's a lot of wasted time.
    I wish of course that the program could suck up and autoload all of the sound files within a directory, names too, until the voices were full. Then I could just fine tune and kick out ones I don't want or want in different order. Not a big deal for users who are importing from all kinds of different sources, but say for impoting libraries like NI's Battery, it's a big deal.
    Maybe these could be choices in the load sample menu.
    powerbook G4   Mac OS X (10.4.4)  
    pb g4   Mac OS X (10.4.4)  

    Microsoft pulled the plug on DirectSound HAL in Vista due to lack of hardware support. The SAL exists for
    software compatibility, good intention but bad performance as there is no longer a direct path from
    DirectSound to audio drivers.
    People choose DirectSound for its Direct-ness
    but there is no reason to choose it now.
    DirectX SDK was integrated
    with WIndows SDK which ships with Visual Studio 2012 so you don't need additional downloads for
    WASAPI and XAudio 2.
    Just look up the documentation for headers/librarieslike every other Windows API you use. If you have a hard time to find the documentation then you need to go to search engines and find search engine tutorials. 
    There are plenty of samples for both WASAPI and XAudio 2, both in the Windows SDK and online. The DirectX team has some suggestions on which to use on their team blog.
    You can find experts for those APIs at the Windows Desktop Pro-Audio Application Development forum and the
    Audio/XACT forum on MSDN (link left out for you to practice your search skills). Again, it is fine to ask for hints but don't ask the whole
    solution. You are competing with others who just need a hint to finish work here. The time spent on working on your assignment would be better spent on helping on giving hints to others. 
    Visual C++ MVP

  • I have installed Adobe Lightroom CC.  In the process of launching, a popup appears, that says:  "AN INTERNAL ERROR HAS OCCURRED.  Cannot create the required folder:  /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets."  So e

    I have installed Adobe Lightroom CC.  In the process of launching, a popup appears, that says:  "AN INTERNAL ERROR HAS OCCURRED.  Cannot create the required folder:  /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets."  So even though Lightroom CC is installed, it will not launch.  What do I need to do to allow it to launch?

    The problem was solved today.  Here's the full story.  I'm a Mac user.  At first I installed Lightroom CC on my iMac (desktop).  I had this problem so I called Adobe, and was referred to a "special unit" .  After about an hour the tech solved it for me ... we did a screen sharing and she took control of my computer for a loooong time.  Because of language difficulties, at first I wondered if she knew what she was doing but she eventually solved it.  Although she couldn't explain exactly what she was doing, she summarized it by saying "it was a permissions problem."  I asked if I would have the same issue later when I installed it on my laptop (Macbook Air).  She said probably not.
    But I did.  The same internal error popup arose on launch and launch did not complete on my laptop.  I tried chat but no joy so I eventually called Apple Care.  I had noticed that on my laptop (and the iMac for that matter), that there was no Library folder after my user name.  The Apple tech explained that the Library folder is actually there but it is hidden because it's very easy for users to do some very nasty things to their computer by going astray while in the Library folder.  The folder is actually there, but they hide it.  I did remember seeing that the tech helping me with my iMac had typed the work "Library" while she was controlling my computer.  Basically she had activated the hidden Library folder so she could open the path that Lightroom was trying to follow to create that "Develop Presets" folder.  For some reason, the inability to create that folder in the launch process was preventing launch from being completed.  The Apple tech said she didn't actually have to do that and activated the Library folder by use of the Go selection on the menu bar.  Anyway, once that complete path was replicated and opened, the next step was to go to the Lightroom Permissions field and add my user name to the user categories already there and enable "read and write" permissions to my user name.  Once done, I shut down my laptop, and then rebooted.  I launched Lightroom and then boom, voila, heavens to betsy, etc. it launched and suddenly a dismal weekend turned into a great one. 
    I am not a geek, so I hope this makes some sense.  I also hope Lightroom launches again tomorrow and beyond! 

  • Feature Request Marked as Being in SQL Developer 3.0 Isn't

    The Unit Test feature request titled "Unit Test Implementation Specific Startup/Teardown" has a Status that is "In Release 3.0", but what was added in version 3.0 was the ability to have multiple startups and teardowns per Test, not what this feature request was actually requesting, which was the ability to give each implementation of the Test its own specific Startup and Teardown (which would be in addition to the Test's Startup and Teardown).
    Oracle: Please update this feature request's status accordingly, or if you need clarification of the feature request, please let me know.

    Hi Bill,
    Thanks for your feedback. Sorry it was not recognized when you originally posted. I have logged an internal bug for this:
    Bug 13578934 - FORUM: TRACE VIEWER ERRORS ON POST-11.1.0.6 DBS DUE TO NEW PLAN HASH VALUE ATTR
    The bug is not a regression, but simply reflects a lack of necessary maintenance in the the trace viewer.
    Regards,
    Gary
    SQL Developer Team

  • Voting on SQL Developer Feature Requests

    I've been reviewing the features requests and of the different statuses, should one still vote on those marked as Accepted? I'm assuming yes to give them more weight to get them looked at sooner? Are those marked Rejected NEVER looked at again? What's the difference between those marked Open and those marked Awaiting Community Votes? Aren't those 2 statuses the same thing?
    Thanks for your help.

    Evita,
    Yes, you can still vote on Accepted. (You can even vote for "Scheduled for release...", because sometimes we need to move features from one release to the next)
    Accepted means that it sounds feasible to do and we can do it, but "when" has not been established. Please add votes to help that decision.
    Rejected Just that, we have no plans to do this. I don't revisit rejected on the Exchange.
    (However, some features that have been rejected have been discussed on the forum and we've reconsidered. We have also changed "rejected" to "accepted" on previous occasions, but only based on discussions here. Some features rejected have very poor explanations as to the problem users are trying to solve)
    Open We haven't read them or made any decision on them.
    Awaiting Community Votes means just that. Someone has proposed a feature and no-one else seems to be interested.With the long list of features, we do need to prioritize and some features requested are obscure, so we want more feedback from the community. More votes and feedback from the community helps. We sometimes get 10 points from some folk and zero from others for the same feature.
    Please note that except for the Open features, the others we have touched and added feedback.
    Problems I have with the feature requests is lack of clarity in the request and more than one request described in a single request. The extra features get lost and others can't vote on them.
    Sue

Maybe you are looking for