Feature Request: Option to Not Autohide Video Controller

Curently, when you enable the built in video controller it will auto-hide when the cursor is not over the movie. I'd like to request you make the autohide feature a checkbox option in the Video properties area and have the video controller stay on the screen as the default behavior. Here's why.
When students come to a sheet with an enbedded video, they have no idea it's a video unless they accidentially move the cursor over the video area. It would be great to have the video controller always visible to let users know there is a video on the sheet, and would save developers some time from having to add instructions on the sheet to play the video. I'd like to remove any/all confusion the students might have in using content built by ROME.
Thanks.
David Egbert

Thanks David! This is now added to the feature request list.
Best,
Sarah
Sarah
Forum Moderator

Similar Messages

  • Feature Request: Option to not require confirmation of erasing Junk Mail

    Many (maybe most) choices that bring up a confirmation dialog allow the user to bypass the dialog by pressing the Option key. I hope that this capability will be extended to erasing Junk Mail in the Mail app (and, wishing here) to erasing deleted items as well. In all the years I've been using the Mac and supporting Mac users, I have only encountered two instances where the confirmation got a cancellation of the erasure and requiring the Option key to bypass would not have affected those users. Meanwhile, the rest of us have to grab our pointing device to confirm, since Cancel is the default. Lots of wasted motion for an infinitesimal safeguard.

    Post at Apple Feedback.

  • IOS 7 feature request: Option for home button to home not folder.

    IOS 7 feature request: Option for home button to home not folder. Maybe for some this workflow is good but not for me. To many clicks. At least give the option to have my home button take me to my home page. 9 times out of 10 that's where I want to go. Not back to my folder.

    send your feedback here http://www.apple.com/feedback/

  • Feature Request - Flag or note options

    Switched from the Dark Side ten days ago after spending my first dozen computing years on PCs. Am tickled with my new Mini and having a great time getting familiar with the Mac environment and learning what different apps can do.
    On the PC, I used Thunderbird for email and there are features it includes that I miss in Mail. My preference is to stay with Mail rather than switch to TBird for Mac, but the absence of certain options is a nuisance given the nature of my work.
    One thing I'd like to see ASAP are more sophisticated options for flagging, rather than merely whether or not to add a flag to an email message. Minimally, it would be good to be able to choose from an assortment of different coloured flags. But ideally, added to that feature, I'd like to see a tool for setting follow-up reminders (e.g., a right-click option that lets you send a reference to the email and add a note about it in iCal).
    Alternatively, being able to attach a sticky or note to a flagged message could provide the additional functionality I'm looking for.
    Does anyone know of any plans to add these or similar features to Mail?

    Apple doesnt often announce new features/plans unless its a for sure thing, or right before launch. I have not heard of any of these features, but that does not mean they are not coming. If you would like, I have provided the link below where you can leave feedback. This feedback is where apple harvests many ideas for upcoming software.
    http://www.apple.com/macosx/feedback/
    ~Ryan

  • Feature Request:- Option to reply to reply to emails in text

    Hi there....
    Is it possible to set up replying to emails to send text (with no html)
    If not, can i get a feature request to send emails in text, or is there an app that has this feature?
    It is sad I get maybe between 40 and 100 emails a day, that I cannot reply to on my Touchpad, or Pre 2, as they only allow text email return.
    as of 2007, there were over 109 million yahoo group members across 8.8 million groups. Mostly support forums, sending and recieving emails to and from 109 million people.
    These support forums and other ghelp yahoo groups, require emails to be received in text, and in our email apps had to set for text only, to avoid viruses and other attempts at marketting.
    I get my yahoo support emails, on webos, but cannot reply from webos, and have to wait until i get to my laptop with thunderbird.
    please can you add text send/reply option for those 109 million plus yahoo group users who cannot reply to yahoo groups emails.
    thanks....
    this is a major pain and must be for others.
    ta
    Ralph :-)
    Sorry for typos
    Post relates to: Pre 2 p102ueu (Unlocked EU)

    Managing layered PSD files in Aperture
    For those who absolutely must manage layered PSD files in Aperture, here is the way to do it...
    1- In your original PSD file, HIDE ALL LAYERS above the background layer
    2- IMPORT this PSD file into Aperture
    3- CREATE A VERSION in Aperture by choosing to edit externally in Photoshop.
    4- Back in Photoshop OPEN THE ORIGINAL PSD file along with the new version
    5- LINK all the LAYERS in the original PSD file and DRAG them TO the new VERSION (holding the shift key down so they pin register)
    6- SAVE the new version in Photoshop
    7- Back in Aperture your version is now an exact layered copy of your original which will not flatten when reopened from Aperture into Photoshop.
    Obviously this process will be rather tedious if you need to deal with hundreds of layered PSD files, but if you are in that situation that implies you already have a workflow and a storage strategy that works well for you. So why change, especially to Aperture?
    Adobe Bridge or Media Pro or Portfolio are the obvious programs for you !
    Dual 2ghz G5   Mac OS X (10.4.3)  

  • Feature Request - Options to Size & Align Type by Cap Height

    I have repeated this feature request at least a couple or more times in this forum over the years. It's a pretty fundamental, basic design thing that bears repeating until the feature is incorporated somehow.
    From its first version up to now Adobe Illustrator has only sized type according to the height of the Em Square. That's the standard convention for print and doesn't really need to change for print publishing. However the Em square methods are really pretty bad in other areas. Designers need pixel-level control for creating and positioning type on electronic, pixel-based screens. For large format printing, sign design and outdoor advertising designers need to size type by cap height in units of inches, centimeters or pixels when designing for LED variable message center signs.
    Adobe Illustrator currently can't even do something as simple as accurately aligning lettering vertically inside of a box. When aligning by way of the Em square the type is never correctly aligned. The fundamentals needed for this have never been present in the application. It really stinks. Designers have to employ all sorts of time-wasting work-arounds to get the type looking correct. This makes basic tasks like button creation far more of a time wasting chore than it should be.
    All fonts have built-in values that establish a capital letter height in numerical terms (the units between the base line and M height line). Industry specific sign design software applications like Flexi and Gerber Omega access that font data and allow designers to accurately size, align and position type according to its capital letter height. Adobe Illustrator can and should be able to do the very same thing. Not only that, but Illustrator could let designers size, position and align type in terms of inches, centimeters and pixels.
    I'm not sure how this feature should be incorporated. Perhaps it could be something that users can enable in the document setup. Or it could be an optional type palette. Nevertheless, it is a badly needed, very basic feature rooted in the core of Adobe Illustrator's vector object editing purposes.

    I'll also add this is a feature that should be carried over into Adobe Photoshop too.
    Within Adobe Photoshop if you want to size type in terms of pixels the type is, again, sized according to the Em square. Unless you're setting type at pretty large pixel sizes the rendered type really ends up looking pretty bad. That's because the edge of the baseline and the edge of the cap height line are never aligned to the pixel grid. You end up with type that's fuzzy looking on all sides. If designers were able to tell Photoshop "make this lettering 20 pixels tall according to the capital letters" the lettering would looking a whole lot better. Perfectly crisp edges on the base lines and cap height lines.

  • Feature request: Slideshow module support for video files

    I'm very excited about your MTS support!
    Feature request: Slide show module  support for video files...
    Say you have 10 takes to choose from. Are you able to almost like SLIDESHOW view the 10 clips full screen so you can decide, like a playlist? Or rate them as they play? It would also be great, like SLIDESHOW to be able to export a MP4 with a title, the 10 clips you are working with, and maybe add an end title and a song, just like SLIDESHOW.
    I have found editing stills like this in slideshow far faster than in any other editing program.
    Basically, I just need a fast means to view or export an MP4 of a set of video clips to review. You are almost there.
    great job!!!
    Max

    I was also disappointed that video is not supported in the slideshow module -I currently have to use another solution when I want stills mixed with videos, would be great to be ablo to keep it all in LR!

  • Feature request: option to deactivate builtin screen when monitor connected

    This is a feature request for laptops, or rather for the Air specifically. To see why it might be a good thing, see this thread:
    http://forums.macrumors.com/showthread.php?t=449778
    I'd like a checkbox in the display preferences to deactivate the internal monitor when an external monitor is plugged in. This would save load on the Air's GPU and reduce heat while using an external monitor.
    Users of the regular Macbook might want this as well.

    Apple doesn't monitor the forum for feature requests and the like. It's just for user-to-user help.
    Also note that this feature already exists: all Mac laptops sold in the past few years, including the MacBook Air, can be run with only an external monitor. It's called closed-lid mode.
    http://docs.info.apple.com/article.html?artnum=86286
    http://docs.info.apple.com/article.html?artnum=307315
    If you then want to open the lid to increase cooling, you can. Once the external display is attached, the internal display does not come on automatically when you open it.
    If you still want to give Apple feedback on another issue relating to the MacBook Air, the link is:
    http://www.apple.com/feedback/macbookair.html

  • Customizing request option is not available in charm

    Hi Everybody ,
    I have a strange issue.
    I created a CR and created a single correction .
    I changing the status of single correction to "In development" . At this point system opens a pop up for creating Transport requests with work bench and customizing requests. But for few single corrections i am getting option only for work bench .
    In pop up i don't have customizing request radio button.
    This issue is happening for only few Single corrections not for all .
    Can u please help me on this ?
    Thanks in advance ,
    vijay

    Hi Deepak Srivastava,
    You can run the following command to enable the feature.
    Set-CsconferencingPolicy –Identity Global –EnableP2PRecording $True
    Best regards,
    Eric

  • JAAS Kerberos Feature Request:-- Option: forwardable = true in configfile

    Hello,
    in order to request a forwardable ticket from the kdc (without using native cache)
    you have to provide the krb5.ini (or krb5.conf) file
    with proper krb connection infos (REALM, domain ...)
    AND
    forwardable = true
    It is not possible to configure
    com.sun.security.auth.module.Krb5LoginModule with this option.
    folowing jaas.conf should work
    KerberosClient {  
       com.sun.security.auth.module.Krb5LoginModule required
       useTicketCache=false
       forwardable = true
    };thanks

    I have just been pulling my hair out with this same issue! I'm fairly new to Illustrator, so figured it was me just not knowing how to do something simple.
    Also I don't think the pen tool in Ideas is really a pen tool as we know it.

  • "execute direct database request" option is not availavle in my OBIEE 11g

    Hi All Experts,
    In my OBIEE-11g there is no option available of "execute direct database request" in subject area pane.Please give the solution.
    Thanks In Advance

    By default, this privilege is only assigned to BI Administrator Role. I'm sure you are not under BI Administrator Role and that's the reason you can't find DDR option. Ask, you Administrator to provide your application role access to 'Execute Direct Database Analysis' & 'Edit Direct Database Analysis' under Manage Privileges > Answers.
    Try using DDR very carefully...You shud understand its pros and cons

  • Feature Request: Option to Quit via "X" and Disable Autostart Without Logging In

    To elaborate on the subject for the DEVs, I would like to request the ability to quit the application quickly or even the option to do so in the settings. Also, I would like to be able to disable autostart without having to log in. I don't use Skype all the time and the accumulation of applications running in the background becomes cumbersome on systems as many other applications each have similar issues of "closing to system tray" or running in the background. 

    You might be able to get where you want using Chaotic Software's MediaRage. It can automate and batch tag editing, including building a Title tag that combines Artist and Title and, to possibly address you other problem, blanking the Artist tag.
    MediaRage is not expensive and it is very powerful, you can even define regexs for how to parse tags.
    HTH. - Tom

  • Feature Request: Option to Load Master in External Editor

    Right now, if I want to edit a file in an external editor, Aperture makes a version first. While I understand the design reasoning, I need to override this behavior in two specific cases:
    First, sometimes I want to use Adobe Camera Raw to process a RAW file. Aperture should allow me to do this directly from the application without exporting the master and loading it from the Finder.
    Second, and this is more important for me, I'd like Aperture to send original layered PSD files as imported back to Photoshop for editing. Aperture will import my layered PSD files without difficulty. If I export the master, I get the original file. But if I try to open it in an external editor (Photoshop) from Aperture, Aperture makes a flattened intermediate version. That's not what I want - and it destroys my non-destructive workflow by flattening all my layers in Photoshop. What I'd like is an option to have Aperture send the master layered PSD file to Photoshop, allow me to edit it, and perhaps save the changes back in Aperture as modifications to the original layered PSD file.
    There's an interesting semantic issue. "Non-destructive" is more than just not touching the original files. It's allowing for a workflow which can be rolled back to previous states. My work in Photoshop uses layers, masks, adjustments, and channels to achieve this. I need Aperture to allow me to keep using Photoshop in a non-destructive way, while enabling me to edit my RAWs and other flattened files in the powerful ways that Aperture offers.

    Managing layered PSD files in Aperture
    For those who absolutely must manage layered PSD files in Aperture, here is the way to do it...
    1- In your original PSD file, HIDE ALL LAYERS above the background layer
    2- IMPORT this PSD file into Aperture
    3- CREATE A VERSION in Aperture by choosing to edit externally in Photoshop.
    4- Back in Photoshop OPEN THE ORIGINAL PSD file along with the new version
    5- LINK all the LAYERS in the original PSD file and DRAG them TO the new VERSION (holding the shift key down so they pin register)
    6- SAVE the new version in Photoshop
    7- Back in Aperture your version is now an exact layered copy of your original which will not flatten when reopened from Aperture into Photoshop.
    Obviously this process will be rather tedious if you need to deal with hundreds of layered PSD files, but if you are in that situation that implies you already have a workflow and a storage strategy that works well for you. So why change, especially to Aperture?
    Adobe Bridge or Media Pro or Portfolio are the obvious programs for you !
    Dual 2ghz G5   Mac OS X (10.4.3)  

  • Feature Request, option to relink all unlinked layer masks when transforming multiple layers at once.

    As a professional PS artist who works on files with sometimes hundreds of layers, I often need to transform many layers or groups at once. It is a nightmare to find that after the transformation, a mask did not get included in the transformation, (especially when the file is many gigs large, and the transformation took 15 minutes). Sometimes, a mask is accidentally unlinked, but more commonly I unlink it temporarily, but forget to relink it. There is currently no way that I'm aware of to find these pesky unlinked layers, other than going through every single one. What would work great is to have a popup asking if you would like to relink all unlinked layers, whenever you're transforming multiple layers that include one or more unlinked masks. Or else have an option in the layers palette to either select or relink all unlinked layered masks. Hope this makes sense. Cheers!

    Michael,
    It looks like you are right! Thank you for your help.
    I still have a small concern. I looked at the documentation and it reads,
    "The configuration settings for a cache instance are stored in the USER_SDO_CACHED_MAPS metadata view. You should normally not manipulate this view directly, but should instead use the MapViewer administration tool, which uses this view to configure map cache instances."
    But, I tried inserting records into USER_SDO_CACHED_MAPS and it works, and I can't really see any reason not to directly insert records into this table, so...
    Perhaps that warning is there simply because potentially you could screw things up tinkering with the table directly.
    Cheers!
    John

  • Feature Request: Option to Backup When Close Lightroom

    I would like to see the option added in Catalog Settings - General in Backup to have the option to automatically backup Lightroom when you exit Lightroom in addition to the other options. This seems logical to me since when you just completed your new work is when you care the most about backing up. I would have the option to ask: Backup Now or not - so that if you just went into Lightroom to just look at something without doing any work - you don't need to backup then. Or - even better - only ask if actual changes were made in Lightroom (I am assuming the program will know if you do anything or not).
    Thanks - Cathy

    While I do understand that there are still processes going when finishing a session I can see the benefit of doing the autobackup of the catalog database on ending.
    I'm not a database guy but I do work with Access at the office and anytime I change a value in one of the cells it automatically changes the database. On the one hand, when sharing values between programs, it is handy to have the database file change and autosave. On the otherhand there's no "Ooops, made a mistake" going back. So 'Caution' in the keyword on this. It also doesn't help matters when others can be in the same database changing values at the same time (such is how the IT people have made it). But in the case of LR there is only the one user active at anytime.
    The main reason I can see this as being beneficial is to insure against machine crashes. Then again, if the computer crashes in the midst of writing the backup there's the potential for a major corruption of the file.
    So there are definite benefits and downfalls to an autobackup on quitting.

Maybe you are looking for

  • Changing locale generates ORA-12705: invalid or unknown NLS parameter error

    By mistake I changed the default locale with following code: Locale.setDefault(new Locale(localeCode)) and I get: JBO-30003: The application pool (com.photoswing.model.site.WebPhotographerGlobalAMLocal) failed to checkout an application module due to

  • Could not find stored procedure 'DataRefresh.GetSchedule'.

    When I try to fresh a powerpivot workbook that is published on SharePoint. It always give me an error. When I look in the ULS log it says Following error occured while trying to execute a sql query: System.Data.SqlClient.SqlException (0x80131904): Co

  • Production order - Backflush items

    Hi, How to reversal the Production Order compoent Backflush items we are cancel the confirmation for that all operation in that production order, Backflush items not reversed. All material set Backflush for material master MRP view 2 pls advise how r

  • PS CS6 install doesn't create Win7 start menu shortcut

    I just did a PS CS6 install, but just the x64 application. The install created an Adobe ExtendScript Toolkit CS6 shortcut in the base Windows\Start Menu\Programs folder, but it didn't create a shortcut (or folder+shortcut) for Photoshop. I created my

  • NOKIA 6020 Background

    Good day Sir/Madam I own a Nokia 6020 phone. Is there a way to change the background that is displayed behind menus, looking like circles? Is it possible to turn it off? Thank you for your time. Andrew Boiu.