Feature request: superscript format

just re-iterating pjazevedo's request for superscript format. It would be a very valuable addition for educators in math and sciences.

Yup. +1

Similar Messages

Feature Request: Better format options Please!

I've been using Adobe Story recently and think it's a great, competitive product that definitely rivals other products!
However, I do think there need to be a few more output options to increase compatibility with writers and producers who may not necessarily be using the latest software. In particular, .rtf and .fdr (Final Draft 7 or older) formats are not given as options to export and this would be very handy as I know plenty of writers who have not upgraded to Final Draft 8 and therefore cannot read the new .fdx extension on files.
Adding these two little things shouldn't be at all difficult and would allow much greater flexibility for users of Adobe Story to share material out without the need of the other party having to reformat things on their end.
Hopefully I'm not the only one looking for this feature update?

Hi Deepak
Thanks for your response. Don't take this the wrong way and please don't feel like I'm shooting the messenger here, but honestly speaking I think rtf *and* fdr format compatibility should be in your frontlog considering you are making a version 1 product that's trying to compete or at least compliment industry standard tools!
Having only fdx compatibility is like Office 2007/2010 only having .docx with no backwards compatibility for legacy formats - it renders the tool useless in the eyes of many potential customers. It great to push new and more open formatting standards but there must, must, must be legacy support too - I mean you already support import of rtf and fdr so it's nuts that it doesn't go out that way too!
I have found that having .txt and .pdf as a bridge for the older software tends to be an inefficient workaround. There are always occasional formatting errors that crop up due to the use of some type of special character that isn't translated properly in the conversion and therefore there is always a need to spend an additional 15-20 minutes re-checking entire scripts to make sure there are no problems before sharing the material to a colleague or client who either cannot afford to or hasn't bothered to upgrade to Final Draft 8 (or Adobe Story ).
That's just my two cents but I'm sure that many people would agree with me that this small update should be a priority to make AS (sorry, I've gone an abbreviated another one of your products - doh!) a more appealing alternative to the tools people may have been used to in the past.
Hope you take this pledge into serious consideration for your next upcoming update!
Thanks,
Kaush

Feature request "Code Format" as what did in Netbeans

as subject
I am using a plugin for coding from opensource.
but that plugin can only format the code from Navigator.
its better to make it available on the right click menu!

Make sure to download the JALOPY extension from the Extensions Exchange at: http://otn.oracle.com/products/jdev/htdocs/partners/addins/exchange/content.html

Feature Requests for BlackBerry10 OS

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This thread has been closed and is continued in this new thread here:
Feature Requests beyond BlackBerry OS10.3.1
Please click on that link.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Let's use this thread to list BlackBerry10 OS feature requests. There's nothing official to this thread, but one never knows who might view it and get an idea or two to move foward.
Please let's keep it to feature requests with simple short statements and comments, in this manner:
1. Ability to lock the volume keys (since they are so easliy pressed when retrieving from holster)
2. Personal distribution groups Address Book
4. Add BBM Group icon to home screen
**This thread is not for bug reports (i.e., the calendar glitches when I set the date) or for debate or discussion of the worthiness of a feature request.
So, what would YOU add to BB10?
What do YOU need to make the OS platform work better for you?
Here are the collected feature requests as of 04 April 2013. Thanks for Ride_The_Sky for helping collect these from this thread.
There are listed in no order, just as collected.
Ability to lock the volume keys (since they are so easily pressed when retrieving from holster)
Personal distribution groups Address Book
Add BBM Group icon to home screen
Way to add line carriage to BBM messages
Why doesn't the most used name come up first? <- In latest OS, there is another line with most common contacts, but when typing it won't provide most commonly emailed contacts.
Bring back the option "Send As" or include this option in "Share"
Enable word wrap when zooming in to emails and messages.
Import Distribution lists from Outlook on your desktop to your Z10?
*The option* to always show the hub main screen when opening the hub, so when peeking it always shows the hub even if you leave it in another screen.
Offer Balance without BES to have two workspaces in device.
Delete on Server/Device/Both
Delete on Server but Keep on Device (This is going to be tough since EAS does not work like POP, using POP you can do this by deleting on server after sync)
Auto power on/off or Auto Do Not Disturb / Scheduled Airplane Mode / Scheduled Silence Mode / Scheduled Custom Profile
Default Currency Option
More options to lower data usage in e-mail (Headers Only / Roaming Profiles)
Snooze a notification/reminder for more than 5 minutes.
Customized Notifications
Disable certain accounts to stop receiving email or notifications from them temporarily to avoid data usage.
Way to delete recent pictures, videos.
Office Hub customization, sorting, editing, etc., on the fly.
Select which contact groups to sync, and ability delete all contacts.
Larger text select tabs
Add more options to dropbar.
Improve browser functionality and display, add customization and management of Bookmarks.
Calendar in Landscape mode
Option to Disable shutter sounds in camera.
Auto BCC option
Multiple appointments in lock screen, not only next one.
Increase email check frequency, custom minutes (possibly battery concern, most accounts use push nowadays)
Ability to hide "texting" numbers such as Work, home, etc that aren't able to receive texts
Ability to have multiple mobile numbers, such as mobile1, mobile2, for people with more than one cellphone
Ability to have multiple work numbers, home numbers, etc
Ability to have option for actually creating "custom" names for phone numbers, emails, VOIP,
Ability to have multiple WORK emails fields for same contact ...
Ability for a custom note field for each contact, for misc information such as store hours, reference numbers, business account numbers,
Ability for filter or unselect specific Twitter, LinkedIn, Facebook contacts so they all don't appear
Ability to "share" contact info with someone else ... like a vcard or the like
Ability to have custom Individual text and ringtones for each contact set within contacts app
Vibrate option for Alarm
Mail Filters for Priority mails.
Option to block ringtones from music app (i don't see ringtones in my music app, I guess poster refers to custom mp3 files)
Swipe down to close, up to minimize (but some apps have menus associated with swipe up gesture)
Swipe half way up the screen to minimize an application to an active tile.
Swipe it all the way up the screen to close the application.
Playbook app switching gestures (swipe sideways, I guess this won't work since there are other gestures associated with side-swiping)
Lock screen with gesture (or maybe they should just add a button on home screen, somewhere on top or bottom)
Airplane mode on status bar options.
Option to customize status bar with select Settings/Options.
Colors for Hub!
Face recognition for camera, being able to associate contacts with faces or pull info from Facebook, etc.
Weather info on Lock Screen (if I may add, and constant info on top status bar, simple temp info should be enough)
We need groups back in contacts please.
Import text messages in various formats from various systems.
Sorting and Ordering of the way contacts are displayed depending on account.
While editing an entry in calendar, notification about a recent call may cause loss of data in that entry.
Location for Calendar entries and be able to see it on the map with a tap.
Being able to see multiple pictures from an email by swiping left and right to see next/previous without having to reopen (I must say the same thing is needed for App World, why can't we just scroll through screenshots??)
Multiple flags or ability to set a flag date, associate with a reminder.
Move people from TO to CC or BCC easily (If I may add, also ability to backspace to delete a contact without having to tap the X in blue box).
Option to add favorites to Hub for easy to reach contact management (I think it is same as going to contacts and choosing Favs)
Being able to answer and make calls when the phone is locked.
Add more colors to LED notification (I think they are there now, orange, green, red so far, did not see blue, I don't think blue is needed in my opinion)
Change the way to add date and time for appointment, rollbar is too slow and too sensitive.
Dismiss and Snooze buttons for Alarm to be different colors, larger, easier to notice.
Make it easier to order world clocks, instead of the order they are added.
Alarms based on days/schedule.
Easier way to get to the bottom of e-mails (I think it scrolls pretty fast, I think poster wants "B" shortcut)
Easer way to get to the bottom of web pages (same as above, space or B shortcut?)
Add option to ask if you really want to dial, instead of just dialing right away every time a phone number is clicked/tapped on.
Ability to resize image before attaching to an e-mail.
More than 30 days email sync on device, please!
Make BB boot up slower, so we can actually get to do something else while waiting for it to start!
SSH client would be nice.
Another keyboard like Swipe (honestly, I have never typed faster in my life on any other on screen keyboard, Z10 keyboard is awesome!)
Volume lock/unlock button on demand.
Auto Run app on device boot up.
Lock or Pin apps.
Ability to run background apps (Google Talk is running in the background, or it is tricking me, I don't know but I am getting messages from it when it is shut down on BB10, I hope they do Skype the same way)
Ability to have multiple documents of same type open at the same time (tabbed docs2go)
Calendar sharing of BB10 users in the area/company/group.
PIN Messaging to return.
Preview e-mails, calendar and other information on lock screen (privacy?)
Way to clear anything in any "Recent" menu, videos, pictures, etc..
Ability to hide apps, docs, pics, videos, folders, etc..
BBM Group Picture notification.
Support WhatsApp more.
Another tap for important numbers (Favorites work for this, and on top of speed dial)
From Call Menu when going into contacts, it should be ready to search with keyboard out.
Option to customize volume key to act as page up/down, etc depending on app running.
Red star in app world (means you need to run Updates, just refresh and check by swiping down from top)
Better headphones with the phone (hey, we didn't even get any!)
Better night shots in camera (hardware or software improvement?)
Ability to choose which address book to sync with bluetooth car.
When app is opened from a folder three or four pages into apps list, we hope the screen can go back to that spot when the app is closed (sadly it uses active frames at the moment)
Change acceptance of auto corrected key, instead of space key, make it something else (actually, you can just backspace to un-autocorrect it back to what you typed).
Ability to load certificates (X 509 S/MIME and/or PGP/MIME) from a computer
Ability to sign and or encrypt emails (POP3) before sending (As in MS Office Outlook)
Ability to receive and recognize signed and or encrypted emails (POP3) (As in MS Office Outlook)
Add a password/certificate manager that doesn't require manual copy/paste
Ability to encrypt the memories Device and Media of the Q10 like it is done for the BB9900
Ability to encrypt selected folders (preferably by Private Key)
Ability to create Self-Decrypting Archive like in PGP
Ability to delete email-messages by group as an alternate option to one by one
Opening Video-chat to non-BBM users (Skype for instance)
For above encryption request, SecuSmart was suggested...
Renaming the file without extension can break the file or hide it from pictures list.
Wallpaper scrolling sideways.
Standalone e-mail app (not sure how different it is than choosing emails-only for hub)
Different colors or small tabs in different colors for different accounts in Hub.
Share webpages with smart tag (I think you can just create it by pasting the URL into create QR)
Application management (being able to see which app takes up how much space, etc..) CPU/Memory/Battery Usage/Data Usage/Storage Usage in more details
Custom vibration options.
Move Send button in BBM to avoid accidental submission of message
Forward As… SMS, MMS, EMAIL from one to another.
Send SMS to new numbers (I think you can still do this from call log)
Single key press to change profiles.
Insert a picture into an e-mail. (I think he means into the body of email)
Turning off links of contacts (I think poster did not have multiple accounts, actually BB10 goes ahead and adds all new contacts into all address books in all accounts without user permission.. Create a contact in Hotmail? Gets copied to Gmail.. and then linked, terrible implementation in my opinion)
Presets for browser bookmarks, faster access to bookmarks. (My suggestion was to create a home screen, select 12 icons 3x4 or 16 icons 4x4 as home screen/start page)
Being able to allow flash based on website/url/server.
Ability to adjust different sounds/volumes for different BBM users/groups
Better Voice Dial and Voice Commands (shorter and easier operation)
Ability close one or all web pages/tabs, add "Close All" button.
Call Recording
Faster way to delete e-mails, such as file icons next to e-mails, or Swipe to Delete! Swipe to File!?
Customize email signatures with formatting.
Phone to stay on screen (dial pad always available in panes)
More Options for Clock.
In Playbook we can have a single character password, why not on BB10? "too short" well it is my decision, isn't it?
There is no way to go next/previous while reading an e-mail. Please add these functions.
Add to the e-mail client, Next Unread / Previous Unread.
E-mail or Hub should have more buttons at the bottom in landscape mode. Why keep only three (or four in e-mail view) buttons when you have the real estate. It would be extremely handy if you allowed users to edit which buttons should go at the bottom. Next Previous is really needed while reading an e-mail. For example I would love to add "File" button at the bottom as a shortcut instead of forward, I rarely forward, but I file all the time. Maybe allow users to have two row of keys, add next/previous/unread. Or it could be done with a gesture. How about swiping the account name (top blue bar while reading e-mail) left and right?
When you create a new contact in BlackBerry, it gets synced to all accounts on the Hub. There is no way to limit the new contact to a specific account.
Sometimes when you file an e-mail to a folder, it stops and waits few seconds with no message. Even when it files immediately, there is a confirmation message that takes time to appear and disappear, and the folder list does not disappear automatically.
Messages filed automatically by server using server side filter rules are still showing up on Blackberry hub/inbox. In older BB versions the filtered messages did not show up in the list, filed messages still did.
When you filter your e-mails using Filter / Unread function, new unread e-mails do not show up until you close the filter and re-open. It won't just keep refreshing your screen with unread e-mails. Can BB add a button to the hub "Unread Hub" so when hub shows 8 or 2, you can actually see unread items easily without having to through so many taps.
Native BB QR scanner (Smart Tags) does not work with barcodes (it only scans with no way to use the information). There is Open In function but it doesn't work properly.
We need to add more customs search providers, and be able to add custom search strings/wildcards. For example currently there is Google, Bing, Yahoo, Foursquare, etc..
I hope BB introduces the ability include more standard & custom searches, IMDB, PriceGrabber, Ebay, Youtube, XYZ Forums, ABC Newspaper, 123 Database, Etc.. Most sites nowadays provide search string in their URL Search=?* etc...
None of the Battery apps can access system settings to add a battery icon to the top. I wish battery percentage was there.
There is no way to check carrier/mobile signal strength.
Blackberry, please add the date and carrier / SSID info to the top. Sometimes we just want to glance at the top to see the date without having to swipe.
Please bring back keyboard shortcuts. Since we can easily swipe up to bring the keyboard, just add keyboard shortcuts in e-mail, phone (true speed dialing, dialing by word?), and browser, etc.. if possible. I could always call 1800SOMETHING# now I have to look up the number or use dial pad.. Please bring it back.
Camera zoom function needs to be fixed, also please include option of fixed focus by tapping on the screen to focus. The auto focus in video is focusing in and out to various objects all the time. Stabilization feature also causes tearing/ripples, I guess it is good if you are stationary. Or use Volume Keys to Zoom.
Please allow more than 12 icons in an icon group/folder, I hated Apple for limiting apps per folder, please fix it.
Auto ON/OFF feature is not there anymore. BB should consider Auto DND (DoNotDisturb) or Auto Silent/Airplane modes instead.
Please find a way to stop the music app from automatically starting up every time it connects to bluetooth like car audio. This is very annoying.
No Panaroma mode in Camera app, why not? It is very easy to incorporate. This could be a nice addition to next release, and easy.
The text selection grips needs to be a little bigger, sometimes I cannot see where I am moving them, they work better in Playbook, nice big tabs.
Call Functions, before answering a phone add sideways gesture functions, like swiping right will forward the call, swiping left will answer with a test message, etc..
Or there should be a way to reject the call without sending it to voice mail, phones had this function a decade ago, I don't know what happened to it.
We used to be able to see the "History" without having to save the contact. Now I don't see any way to "View History" of a certain phone number, it just keeps adding
them as individual entries to the log. Now I can't see when was the last time they called me, how many times we spoke which day, etc... I loved this feature in BB5.
Where is BB Traffic? Where is BB Weather, without having to run an active frame? It will eventually disappear if you run too many apps. I liked a little Icon that shows me what the temp is, instead of running a whole app.
There is no Skype. This day and age with all other platforms having it, please either get skype (Microsoft) to cooperate, or open up BBM to other platforms. If necessary, pay Skype to develop the app, then charge BB users for the app. Most will gladly pay.
Can we tap and hold on an active frame to pin it, or can we pin two favorite apps between Call and Search & Search and Camera buttons in the bottom bar? How about Close All running Active Frames app to quickly free up ram?
I hope next generation devices have two speakers or speaker that is facing forward. When playing games or watching videos in landscape mode, I find my palm muting the speaker. I have to hold it gently with fingers to have a gap in between, something I don't want to do when I am on the subway or bus.
Blackberry Maps should have a Zoom In/Zoom Out buttons, sometimes using it with one hand, it is impossible to zoom in and out. (Zoom in is OK but we can't zoom back out)
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Solved!
Go to Solution.

- ability to choose deletion of an email on handset only
- desktop software working with all older BB's allowing drag and drop type of transferring data, contacts etc. (BB link doesn't recognize my old Storm)
- auto power on/off
- contacts syncing with yahoo & Outlook (almost two weeks trying to work around it and no luck)

BUGS and FEATURES REQUESTED. Please add to it.

I've been using the z10 for the past couple weeks and wanted to start a thread of comprehensive Bugs and Features Requested.
I've labeled Bugs by letters (A,B,C...) and Features Requested by numbers (1, 2, 3...) so that others can add sequentially.
BUGS
(Not listed in any particular order)
(A.) Contact App adds current date as birthday. When I edit my contact, the current date gets listed as the birthday in local contact.
(B.) Duplicate telephone numbers listed. Telephone numbers show up twice in my Contacts (e.g.., if I have the contact's cell saved in (000) 123-4567 format and the person has the number listed in Facebook, I get a duplicate entry of +10001234567).
(C.) Telephone numbers and emails are not actionable in Web pages. In webpages, I can't click on telephone number to call (e.g., I look up a phone number for a restaurant). I should be able to easily call or copy into the Phone App or E-mail App.
(D.) Auto capitulation for words on the word substitution list is wrong. For example, when the word substitution contains more than one word. I have "ru" change to "are you" but if the first letter is capitalized (R) then both words become capitalized words (Are You). I used to have shortcuts like "mysig" to create email signatures with legal disclaimers but I can't do that now.
(E.) Backspace delete doesn't work consistently. The Shift+Delete function seems only to work after moving the cursor. This feature is the Alt+Del action to delete words after the cursor.
(F.) All Emoticons do not list. Emoticons do not all fit on the the two screens (lists) of emoticons. I.e., two columns are missing from view and can be seen when sliding (swiping) between the lists. Also, sometimes when I select an emoticon, it doesn't correspond with the picture of the one I intended. I believe this error is related. As a separate note, there should be a way to see the underlying symbols of the emoticon. (Often times, other people don't have BlackBerrys so I'd like to know what symbols would be sent--my prior 9800 would show the characters as i scrolled through them).
(G.) BlackBerry keyboard doesn't always work in input fields. E.g., certain Web pages. (I found a work around; two finger swipe up from the bottom makes the keyboard appear)
(H.) Sent messages stay unread. This seems to be an issue when an app sends an email (e.g., share article). The email with the sent indicator (checkmark) stays bold and I have listed 1 unread email. I can't mark as read/unread but if I delete the sent email, my unread message gets cleared.
(I.) Contact already added but I get the option to add instead of view contact. For some contacts, I get the option to add to contacts in the action menu cascade when that person is already in my address book. This bug is for emails and text messages.
(J.) Cannot call from text message. When I hold a text message and select call under the action menu cascade, the OS opens up the phone app but doesn't call.
(K.) Composing messages by name. When composting messages, the input must be by first, middle and last name. It should be, instead, by string and include nickname. E.g., if the person's name is "Andrew B. Cameron" I must type the name in as such. I can't type in "Andrew Cameron" or "Andy Cameron."
Features Requested and Suggestions for Improved User Experience
(In no particular order)
1)      Option to reply in different ways from the Call List. Be able to select a name in a call list and have options to call, text or email the person. The action menu allows calls to other numbers but I can't choose to text or email the contact instead. Sometimes, I missed a call and want to reply via text because I’m not able to talk. (Long hold on the Torch 9800 trackpad button brought up the action menu allowing me to call, text, view history, add to speed dial, e-mail, delete, etc.)
2)      Option to reply in different ways from the Hub. Related to above, when selecting an item in the hub, have the option to contact the sender or caller with multiple different ways.
3)      Only show number once in contacts application. Tap on the number to bring up the "action" cascade menu with options to call or text the number. Why is the same number listed twice (once to call and below again to text it)?
4)      Timestamps for individual text messages. I can't tell exact time on individual text message if it comes in near the time of another text. All messages are in one "bubble."
5)      Ability to select MMS or text for a message. Sometimes I write a text longer than 160 characters and I prefer it to be sent in one message (i.e., MMS mode) rather than being broken into one or more standard text messages. I had this ability with my 9800.
6)      Send button should be moved for text messages!!! Why the heck is it right underneath the delete button?!? Or next to the period button? I often times have accidentally hit send when composing text. It's very annoying and embarrassing. (Also, what happened to the ability to hit enter for a return carriage to next line?)
7)      Bigger magnifying glass. My finger is often over the area I need to place the cursor. I find it difficult and erratic to place the cursor.
8)      Select all option. Add the option to select all text in action menu cascade.
9)      E-mail recipients and message headers. Difficult to tell if you are one of many email recipients. Can we have a way to pull the email down to see the list of recipients rather than have to click to expand the header info? I know this request is a little picky, but that's how it was done in the previous BlackBerry OS which I preferred; it is easier and faster to pull the e-mail down and 'peek' to see which e-mail box received the message, message status, from and to fields. This change would be consistent with BB's flow/peek rather than click.
10)   Browser navigation. Hold down back arrow to get a list of recently visited websites similar to a desktop browser.
11)   Dark/Night mode. A night mode (maybe in the drop down menu) to change all the white and bright backgrounds to black or dark which would be helpful when reading/viewing things at night in bed/etc.
12)   Number of contacts. Ability to see how many contacts I have.
13)   What happened to groups or categories? I'd like to have back the ability to filter or see categories and also a way to contact everyone in a category. E.g., family or friends or coworkers, etc.
14)   Shutter sound mute. I was at a wedding and wanted to take pictures during the ceremony but the shutter would was too loud.
15)   East Asian Language Input. I bought my parents two Samsung Galaxy S3 phones over the weekend because they need Korean input (and the Kakao talk app). (BTW, S3 is a great phone but I prefer the Z10 after having the weekend to use the Android phones).
16)   Ability to freely place icons on the homesreen. Currently, icons are forced top left-right-to-bottom. I prefer to space my icons out.
17)   Add a contact to the homescreen. I'd like to place a shortcut (similar to a Webpage) to the homescreen for a contact which will open up the contact. Android allows this feature and so did my previous 9800.
18)   Search Contacts by nickname. The contacts app doesn't allow me to search by, e.g., Andy, even if I have that as my contact's nickname. The previous OS allowed this type of search which was very helpful.
Finally, as a note, I've been using the BlackBerry Z10 for the past 2 weeks and it's a great platform. I just bought two Samsung Galaxy S3 phones over the weekend for my parents so they could use the Korean language input and related features so I spent a lot of time with the Android platform, setting it up and teaching them how to use it. The S3 is a great phone too.
I prefer, however, the way BlackBerry has done their OS 10 and the integrated management of messages.
It's too bad that BB doesn't have Korean input and apps like Kakao Talk or I would have considered it for them.
The BlackBerry 10 is a great platform and I look forward to the continual improvements that will only make the experience better.

This is a great post.
I couldn't have written it myself better.
I'm also in dying need of Korean input as I can't communicate with my Korean friends.
But I second every point.
I hope the tech teams are reading this.

FEATURE REQUEST: Enhanced Texture Options in FW

Recently, a forum user was asking how to change the color of a texture in Fireworks to red or blue. In particular, he/she was struggling with attempting to apply a texture to a white object, and it wasn't showing up.
http://forums.adobe.com/thread/1006694?tstart=0
The question got me thinking about textures, how they're created and how they're applied. Textures are a unique and distinctive feature of Fireworks. On the one hand, the interface for textures is very simple to use and almost magical; on the other hand, it's surprisingly limited. The concept is great, but the implementation seems only half-baked.
With this in mind, I'd like to suggest a few simple ways that textures could be made more fluid and versatile in Fireworks.
First, a little background...
WHAT IS A TEXTURE?
In the world of Fireworks, a texture is basically a type of pattern that's applied to an object. However, unlike a pattern fill, textures include transparency and integrate with the existing fill content (color, gradient or pattern). They're suggestive of textures in the real world, which are often tactile and defined visually by light and shadow.
Texture graphics are most commonly grayscale ("black and white") in GIF or PNG format. Applied within the application, the graphics are converted "on the fly" to white-on-transparency. If the Transparent option is checked, the graphic is converted into a sort of mask, making the "textured" areas invisible instead of white.
And that's about it.
So what if you'd like to apply a dark texture to a white object? Sorry, it can't be done. What if you'd like to apply a texture in color? It can't be done. What if you'd like to reverse or invert the pattern of the texture? Can't be done.
Well, in fact, these things can be done, but not directly. They require workarounds such as cloning the object and placing the clone above or beneath the original, applying textures as pattern fills (instead of as textures) and adding effects like Color Fill, Invert, and Convert to Alpha, or editing the texture file directly, saving out a new copy, etc. In short, there are unintuitive ways to accomplish these goals that lead to bloated effects lists and layers or that require extra time and care.
HOW CAN TEXTURES BE IMPROVED?
First of all, does it make any sense that textures are applied exclusively in white? Not really. In the real world, a texture can be defined not just by light but by shadow. And even shadows can have color. This means that, at minimum, it would make sense to allow for the application of a texture in black, and, at maximum, in any chosen color.
Secondly, textures are relative. They represent change to an existing surface. Sometimes, it might make sense to highlight the texture itself; other times, the surface around the texture. This means that being able to quickly reverse the figure-ground relationship of a texture would be a very handy feature.
With the above concerns in mind, I've devised three 'user interface' scenarios, presented here in order of most conservative to most extreme. The first scenario is the least powerful but still doubles the number of possible outcomes (compared to the existing interface). The second scenario may be the most logical of the bunch and represents a modest evolution of the existing interface, while increasing the number of potential outcomes even further. The third scenario allows for the application of any color to a texture but also represents the biggest change to the existing interface; that said, it's also quite compact.
Scenario 1: Invert option
The idea here is simply to add an Invert checkbox to the existing options. Checking this option would convert white to black, allowing for the application of dark textures to white or light-colored objects. In "Transparent" mode, this option would invert or reverse the figure-ground relationship of the existing texture.
Scenario 2: Dropdown menu plus Reverse option
Here, the Transparent checkbox is replaced by a dropdown menu that includes 3 mutually exclusive options: White, Black, or Transparent. Checking the "Reverse" option would invert the figure-ground relationship of the texture. This scenario allows for 6 possible outcomes in place of the existing 2, and is actually more logical than the first scenario, which conflates two options.
Scenario 3: Color picker plus Reverse option
Here, the Transparent checkbox is removed, and in its place, a color chip/palette is added to allow for the selection of any color to be applied to a texture. (Choosing Fill: None would create Transparency.) Again, a "Reverse" option would invert the figure-ground relationship of the texture. This scenario differs most from the existing interface but is quite compact and allows for the greatest number of outcomes.
SO WHAT CAN YOU DO?
I've submitted a feature request to Adobe's official site:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
When it comes to bugs and/or feature requests, every vote counts. If you care about this issue, I encourage you to submit your own feature request to the above URL, referencing this post if desired. Feel free to copy and paste the feature request below or write your own. (Be aware that there is a 2,000 character limit to the "issue description" of a bug report or feature request, and the following report is very close to that maximum.)
FEATURE REQUEST
Product name: Fireworks
Product Version: 12.0.0.236
Product language: English
*******Enhancement / FMR*********
Brief title for your desired feature: Enhanced texture controls, including the ability to apply textures in black and/or color (instead of white), and the ability to reverse or invert texture.
How would you like the feature to work? Three possible implementations have been outlined in this forum posting:
http://forums.adobe.com/thread/1042206?tstart=0
The basic scenarios are as follows:
SCENARIO 1: An additional "Invert" option. Checking this option would convert white to black, allowing for the application of dark textures to white or light-colored objects. In "Transparent" mode, this option would invert or reverse the figure-ground relationship of the existing texture. This scenario would allow for 4 options in place of the existing 2.
SCENARIO 2: Replace Transparent checkbox with a dropdown menu (White-Black-Transparent) and a "Reverse" checkbox. The dropdown menu offers 3 mutually exclusive options, while "Reverse" inverts the figure-ground relationship of the texture in each case. This scenario would allow for 6 options in place of the existing 2.
SCENARIO 3: Replace Transparent checkbox with a color chip/palette and a "Reverse" checkbox. The color palette would allow for the application of a texture in any color, while choosing Fill: None would create Transparency. This scenario would allow for the greatest number of options.
Why is this feature important to you? Textures are unique to Fireworks and potentially very useful, but their implementation is incomplete. The use of 'white only' means that textures cannot be applied to a white object. Inverting a texture or applying a texture in color requires advanced workarounds and can lead to bloat. The suggested options would make the feature exponentially more powerful and intuitive.

Thanks, Jim! It is a very blog-like post. (I still haven't gotten around to starting a blog but keep thinking I should.)
I figured the clearer and more thought-out the presentation, the greater the likelihood it might get implemented. Also, I was originally stuck on Scenario 1 as a solution, and writing this helped me see other options.

Feature Request: Raw-Lite for the F5/F55

Hi Sony Staff, Here's a feature request that I've been pondering for a long time now. Raw Lite on the F5(5). Is it a possibility? I'm a huge fan of the conventional 3:1 compressed 4K 16-bit Linear Raw from the AXS-R5. It provides a supremely high quality digital negative, with as much detail and tonality as you could ever really need. However the file sizes are very large. 1TB yeilds roughly an hour of recording time. And the storage costs associated with that are enough to scare away MANY producers from shooting Sony Raw (even with all of the benefits that doing so offers). You guys have addressed this issue nicely with the F65 by offering Raw Lite with it's 6:1 compression (which coincidentally, is a compression rate that many, many producers are content to shoot with on the most prolific raw cameras out their - the Red Epic/Dragon/Scarlet cameras). Being able to offer producers the option to shoot Sony Raw Lite, with it's massively more managable file sizes would greatly increase the uptake of Sony Raw for production - and that benefits everyone. It benefits the camera department with a superior digital negative, it benefits post-production with greater latitude for grading and VFX, it benefits producers with a superior end product, and it benefits audiences with better looking images. Given that the F65 was able to be upgraded to offer this additional raw recording option, I assume (and hope) that it's not an impossiblity for the F5(5). So I'd urge you to strongly consider this feature request, and the added appeal it would bring to the cameras as a capture choice. Cheers, Mark

I disagree that there is little difference between 12bit and 16 bit linear raw. The difference is huge. Shadows and dark areas from the FS7/FS700 are pretty grim, lot's of noise caused by the data rounding. Besides, in terms of bit rate it's not a question of simply reducing the bit depth, you need to increase the compression. For linear raw you need 16 bits unless you do an extreme amount of data rounding. For Linear raw, if the first stop is represented by just 2 bits of data (which results in very blocky noise as noise will be one of 4 luma levels and cannot be smoothly reproduced): stop 1: 2 bitsstop 2: 4stop 3: 8stop 4: 16stop 5: 32stop 6: 64stop 7 128 (8 bit linear limit, 128 + 128 = 256 bits)stop 8: 256stop 9: 512 (10 bit linear limit)stop 10: 1024stop 11: 2048 (12 bit linear limit)stop 12: 4096stop 13: 8192 stop 14: 16384 bitsstop 15: 32768 bits (16 bit linear limit) If you move this scale up so that the first stop is represented by using 4 bits of data you will still have pretty coarse shadows and noise (one whole f stop will only have 16 posible luma values). So rather than just use binary math most linear raw systems use floating point math to make more bits available for the shadows. But with 12bit there just isn't anywhere near the same amount of "spare" bits that you get with 16 bit, so the shadows and low key areas really suffer. Just go and look at the FS7/FS700 boards and all the compliants about unusable, grainy and blocky shadow areas in the raw. Sure raw lite would be a welcome option, but it wouldn't be one for me. The whole point of raw for me is a robust, bomb proof format that you can expose and grade as you wish without worrying about artefacts etc.

Multiple Imperative Feature Requests

I am a MN Photographer and have been using PS Lightroom through 2 betas and 2 release versions. I have been amazed at the improvements Adobe has added, but from my point of view, they need to add a few more features to make LR more robust and efficient!
I love the way LR makes terrific web galleries!
I am running LR from a Seagate Barracuda 300 External Hard Drive with Firewire connection. I am using a Mac Powerbook (1GHz Processor) with 60GB HD and 55% free, w/ 2GB DRAM, and an Apple Cinema Display. I can't complain about slow downs, but keep my permissions tuned once a week, both on the Mac PB and all EHDs.
LIGHTROOM FEATURE REQUESTS
1. From the Web module, there is only one option for adding Copyright Info to images in the Web Galleries, either ON or OFF. It would be a great addition to have this option variable by type size, type placement on images, and opacity. I last generated a web gallery and some of the images said, "2007 Alex Bachnick All Rights Reserved," but many of the images said, "Alex Bachnick All Rights Reserved," without a year. A few images said, "Copyright 2007 Alex Bachnick All Rights Reserved," like it is supposed to! The LR application has been inconsistent so far in this area. By adding a line of copy that can be saved, and by varying the opacity and placement on images would be a huge step forward!
2. It is IMPERATIVE that you embed metadata into the Web gallery images. This is primarily for adding keywords and copyright information, but LR is inconsistent so far. Sometimes metadata is preserved, but it doesn't always get embedded when exporting images.
3. When I generated a Flash Web Gallery, some of the color was good, some of it was terrible. I have suggested before that you write into the action that takes the original image, reduces it in size, then convert to profile from Prophoto to sRGB. I suspect that you have a script in there "Save for Web". This script is denigrating the color when Convert to Profile would preserve the color. Admittedly Safari is the primary web browser I use, and it's color-centric, whereas most of the others IE, Netscape, and Mozilla, aren't.
4. When I use HTML for the web galleries, the color is spot on, but a young friend told me it would be better to hit one button to go through the images as in a rapidly advancing slide show, rather than hitting each image, and then wait for it to enlarge. This could be another marked improvement, if you made the output a slideshow from the Web Module.
5. I tried generating a slideshow from the Lightroom menu, and had about 200 images in a collection. The application went through the motions, but I tried opening the slideshow but it didn't work. I tried it in PDF format and it output a 135MB file that ADobe Acrobat couldn't open. It is still not working. I have also used a third party application Photo to Movie (www.LQGraphics.com). This is a $50 application that you can add music to and vary the zooms and dissolves and this works incredibly well!!!
6. One of my biggest problems so far is the sort mechanism. I have about 9500 images in my library, and about 5% of those were made from about 2004 and on. My images are sorted by "capture time," but the images shot back in CY 2004--2005 are mixed in somewhere way down in the pile. There are some bugs in the program for reading the capture time, and so far this is not working accurately!
7. From the Lightroom Library module, several times I have exported images for 3rd party needs and the application puts out varying results. In March I output some images for Communication Arts magazine. They specified file size and format, and it took me several times to export the images to their specifications. I recently exported some images for submission to a UK based stock photography agent. The images came from 5 different cameras~~Hasselblad w/ Imacon Digital Back, Kodak DCS-14, Canon 1ds MkII, and Canon D-20. There were 10 images that needed to be output as JPEGs (

1. LR uses what was written in the copyright field so it's your data entry that is inconsistent.
2. Are you 100% certain this is not working reliably under 1.1? It definitely wasn't working at all under 1.0 and Adobe responded to complaints. Since 1.1, I've taken large numbers of Web-generated pictures into iView and not found any cases where the metadata was missing. "Sometimes" is too vague. How exactly can you prove it? What programs prove it?
3. Not sure, but isn't this a problem because of Flash? Also the browser you use is not important - it's the browser that your visitor uses that you need to focus on.
4. Realistically, Flash is better for this. You can always get someone to write/modify HTML templates to do such a slideshow, but the built-in templates are already very complex and this suggestion would add another layer of browser incompatibility.
7. This isn't a feature request. Raise this in the main forum - and be specific (your post was also too long and got truncated). How can anyone help you if you say "varying results"? It's unlikely that any variation is random.
John

Feature request for next firmware of 5320 xm 4.13

in the next firmware for 5320 xm 4.13
we want new features to be included in this great phone 5320 xm
note :
mod pls donot delete this bcoz its of great importance for nokia people
here is the list of features requested
Comes With Music
Nokia 5320 has a problem on video playing, mostly on MP4 and 3gp format, it's laggy! Hope that nokia will fix that...
Screensaver bug it´s not fixed.
Screensaver displaying time and date still disapear after 60 secondsvideo quality for fast moving and flashing videos.
FM loudness on loudspeaker
option to define download location other than phone memory.
Viewing experience in gallery, as some old OS9.2 have better gallery view than 5320.
Solved!
Go to Solution.

Please define features of firmware v5.16 and difference between firmware v4.13 and v5.16
Thanks
If you like my post or think it was useful then please hit the star button. Thanks :-)

FEATURE REQUEST: After Effects style Placeholders and Proxies

If you feel the needs in efficient proxy workflow, welcome to the club and don't hesitate to submit feature request.
Here is the adjusted to less than 2000 symbols feature request text:
***After Effects style Placeholders and Proxies***
It would be nice if PrPro offered AE style Placeholders and Proxies workflow. There are cases, where they are extremely useful, e.g.:
1. Huge modern formats and resource hungry codecs. Not all machines can easily handle 2k or 4k footages, some can't get real time playback even with AVCHD. Not to mention that CinemaDNG importer was discontinued partly because of inability to get real time playback in PrPro. The issue can be resolved via rendering previews, but that's not always the most efficient workflow.
2. In multicam editing issues mentioned above increase dramatically. Rendering preview for every camera angle is simply impossible. Although PrPro offers offline clips workflow, an editor can't easily see if the clip is currently linked to a source footage or a proxy, and switching between sources and proxies involves several steps every time one needs to switch: selecting assets, making them offline, right-clicking again to link to other media, locating files on a disk; while in After Effects it's just one click once a proxy is set.
3. Adobe Dynamic Link. PrPro communicates with AE projects via single instance of headless AE, which creates a bottleneck and entails the need to render DI for complex comps. Although AE allows to set DIs as proxies and, hence, enjoy the best of both worlds, instantly switching between DI and dynamically linked comp and no needs to replace anything in PrPro timeline, with hundreds of dynamically linked comps PrPro timeline becomes unresponsive and takes forever to render (for my rig test 30 min sequence built out of 935 dynamically linked comps, which are just source footages in their own comps, hence, the equivalent to rendered DIs set to proxies, takes around 27 hours to render, while 30 min sequence built out of the same 935 source footages renders in real time). Meanwhile, PrPro doesn't currently allow to link offline dynamically linked comps to rendered DIs.

As the person who maintains the feature request database for After Effects, I can confirm that the number of times an item has been requested is a major factor when we consider what to work on next. So are other factors, such as how hard the feature is to implement and maintain, how much testing is involved (often the larger concern than programming time), whether the request conflicts with something else that we are already working on, and so on. It is true that we consider not just raw numbers of requests but the details of who is making the requests---e.g., whether the requests are coming from animators or compositors, beginners or experts.
I can only speak for the After Effects team, but the Premiere Pro team works much the same way (which is unsurprising, since we are in the same group and have overlapping team members).
We also try to give some visibility into the most requested items with posts like this:
http://blogs.adobe.com/aftereffects/2012/12/top-feature-requests-for-after-effects-in-2012 .html

Feature Request: Apply effects to group of clip instances

I have been trying to supply this feature request into the Adobe feedback form. But it appeared that it was too large to be posted in a single feedback form. So I had to split it into three distinct feedback forms.
I don't want this feature request to get lost just because those three parts can't be joined back into a single feature request again. So I'd like to post it here, requesting for comments, too...
This feature request is about applying effects to more than one clip:
a)
Currently, when selecting more than one clip, it's not possible to change any effects settings. The Effects Settings windows only shows a "Multiple clips selected" message.
Thus, I'd like to suggest the following:
When selecting more than one clip, the Effects Settings window should display any effects that apply to all the selected clips. Moreover, only those effect parameter values should be displayed having the same value across all selected effects. This on the other hand, of course, can only be displayed for effect parameters not having key frames/timing activated.
Editing any of the displayed effects' parameters should apply the new value to each currently selected clip instance.
b)
Then again, when using key frame/timing activated effect parameters, it is currently not possible to apply such effect to more than a clip, too. To apply such animated effects to more than one clip it is currently necessary to nest those clips into a separate sequence.
Thus, I'd like to suggest the following improvement:
It should be possible to apply effects not only to clips but also to a group of clips (Menu Clip > Group).
Activating animation/key framing to any of the effect settings of those effects being assigned to a clip group (in contrast to those effects assigned to any clip instance contained in the the group) will allow to add key frames spanning all clips of the group.
This way it will be possible to easily create, e.g., a zoom effect spanning several clips.
If there are clips in-between those belonging to the group, the group's effects won't be applied to those clips not belonging to the group. However, the effects' parameter values are continued to be calculated in the background.
So this example would be true:
- Available clips:
| a | b | c | d | e |
- Clips grouped into a Clip Group:
| a |   | c |   | e |
- Zoom video effect applied to the group, having two key frames added:
Key frame #1 = beginning of clip | a |
Key frame #2 = end of clip | e |
Zoom value of key frame #1 = 100%
Zoom value of key frame #2 = 400%
--> So this will be the approximated calculated zoom value when the timeline reaches following points in time:
Beginning of clip | a |:     100%
End of clip       | a |:     132%
Beginning of clip | b |: (100%)
End of clip       | b |: (100%)
Beginning of clip | c |:     174%
End of clip       | c |:     230%
Beginning of clip | d |: (100%)
End of clip       | d |: (100%)
Beginning of clip | e |:     303%
End of clip       | e |:     400%
(Unfortunately, this forum doesn't allow me to apply any kind of formatting to the example above. So I can't apply a monospace font or colouring )
When a group gets ungrouped (Menu Clip > Ungroup), effects that had been applied to the group will be assigned to each individual clip of the group. For effect parameters that had key frames/animation activated, key frames will be created at the beginning and end of each of the clips. The previously calculated values will now be inserted at each automatically created key frame to mimic the grouped effect behaviour. This operation then would finalize the Ungroup operation involving clip group effects.
Regards,
Axel Dahmen

You could combine the Next/Previous Edit commands with either the Apply Video Transition shortcut or with a paste command if you had copied the transition you want.
OR... much easier if all you want is a bunch of consistent fade ins/fade outs...
On a single clip, keyframe opacity to create a fade in from the in point of the clip at the duration you like, e.g. 30 frames. Right click Opacity, and select Save Preset; give it a name, e.g. Fade In 30 Frames and set it to Anchor to In Point. Reset the effect and delete the keyframes, and then repeat this to create a fade out. Go to the out point of the clip, set keyframes, and once again, right-click Opacity and Save Preset; this time call it something like Fade Out 30 Frames and set it to Anchor to Out Point.
Now, you can simply select all of your clips in the sequence, and apply these presets by dragging them to the selection. Even though you created two presets, because you can only have one instance of Opacity on a clip, the keyframes from both presets will be added to that single effect. You have to do this with two presets--if you do it with one and use Scale, the keyframes will stretch out or compress to maintain a relative duration instead of an absolute duration.

Feature Request - If a Save to PSD fails because of image size, offer to Save to PSB

Feature request — If a save to a PSD aborts when the file size grows beyond 2 GB, offer to save the file as a PSB instead of just displaying an error message and quitting. Better yet, if the image is to big to begin with, make the offer before starting the save operation. Similarly, if an image is too large to save to TIFF, offer to save it as a PSD or PSB.
When you’re working on large files, it would be nice not to have to redo a Save as a Save As to PSB after several minutes delay.
BTW, I tried without success to post this at the feedback site. Once again, a dialog opened asking for a verification code that would be sent to me by e-mail, which in past attempts has never arrived.

Not a bad idea, though really what would be even better is if other 3rd parties would embrace the PSB format so we could just use PSB for everything and leave PSD behind. There's almost no difference in size. Here's the same file saved in both formats:
C:\TEMP>dir egb.ps*
Volume in drive C is C - NoelC4 SSD
Volume Serial Number is 00ED-C11E
Directory of C:\TEMP
06/30/2012 01:04 PM 1,411,420 EGB.psb
06/30/2012 12:14 AM 1,397,248 EGB.psd
In my case, I don't send PSDs to anyone, they just represent archives of my master work, and I will always have a modern version of Photoshop to read them with. So if I could I would just use PSB for all master files. Problem is, two 3rd party tools I like to use don't currently handle it:
IrfanView
FastPictureViewer Codec Pack
Probably some day in the future they'll work. I encourage you to write to the people whose tools you'd like to see be able to read PSB to implement support.
See also this thread: http://forums.adobe.com/message/4393244
-Noel

Feature Request - Safari Dimmer

Did not see any other place to make a feature request, so here goes:
Recently I installed a DivX player on a WinXP system as was pleasantly surprised with the "Desktop Dimmer" (apparently also available for OSX). It seems that though this functionality is currently a function of the player, it may be possible for Safari to detect that a particular video player plugin is active and streaming and perform the same function for all formats.
This would tie in nicely with the annoying behaviour on my MBP to dimm the screen after a minute or so of inactivity which can't be controlled from the Power management or Screen controlls in System Manager. Argh.
If I'm trying to stream an hour long motorcycle race, I don't want to have to keep moving my mouse to brighten up the screen. And it absolutely MUST be dimmed, then at least leave the streaming part alone.

This is a perfectly good place to post this. There is also at least one other place to give Apple feedback (including feature requests) about their Mac OS X applications: the Mac OS X feedback form. (You will not receive a response by filling out that form, but the feedback is channeled to the people who can best use it.)
This would tie in nicely with the annoying behaviour on my MBP to dimm the screen after a minute or so of inactivity which can't be controlled from the Power management or Screen controlls in System Manager. Argh.
Raising the time before display sleep in the "Sleep" section of Energy Saver settings, making sure that's changed for both the Power Adapter and Battery settings, doesn't do the trick? (It might not, always - just checking. :-))

AMP Feature request thread

I've just started trying to use the AMP for some home entertainment and I must say it has been a challenge to enjoy this product in its current form. Perhaps I dont have a grasp on what the expressed functions of the player are, and what advantages can it offer me over the myriad of other players and services.
I can find nowhere else to leave feedback and suggestions or have dialog with adobe developers so I thought, like in many other Adobe product forums, to begin a feature request thread in hopes that if enough users add feedback we may eventually have an improved product. In the same regard users can enlighten others as to what functions they find useful already. Its not meant to be a gripe list but a chance to voice constructive ideas and share experience with the product.
Preamble complete, I will have first go:
1) The system options seem very limited to me, for instance I can not find an option to view or change in what directory\folder the video files are downloaded or cached to.
2) A minimized view or skin would add benefit for me. It seems now the only options are full screen and a small window housed inside the AMP program window. With any other media player I have used one can play a file in a resizable window without all the other program buttons and menus eating up your screen space.
3) Video controls options during playback, like chroma level, brightness/contrast, gamma. This is standard on other players.
4) I get annoyed when I am watching a video and I pause and go to the home or favorites tab, AMP automatically disconnects the video I was playing, and the I must search the catalogue to find it, restart it, and re-watch the commercials if any to re-cue it to the last viewing spot.
5) I dont really appreciate the default favorites or new episodes listed. That is not needed.
6) There are no right click menus? Odd. At the least I would like to be able to right click a video file to pull up information on it. In fact, I would like any method of looking at files information. This goes hand in hand with the general lack of user options throughout the program.
7) Last one for now, but a big one. Why in the world would AMP not support more video formats? I, like most computing people, horde all kinds of different media files in my various libraries. If AMP cant play them it has a big disadvantage to all of the other ubiquitous media players out there.
Thats it for starters. Hopefully I will start get more familiar with the program and then find more benefits. Please, add to this thread if you have any thoughts on the AMP.

1. Ability to skip forward (fast forward) through a video or rewind video.
2. Point AMP to a set of folders containing personal videos I want to watch in AMP. Right now, if I have a series of videos that form one full course, I have to eliminate the previous course videos so they do not get mixed in with the new course videos.
3. Ability to go back to where I was in the video when the Internet goes down (or flickers) rather than play from beginning.
4. By the way, why are the TV shows going away? This was the No. 1 reason we installed AMP on our multimedia computer!
That is all for now.
Thanks,
edsager

Feature Request / After Effects

Feature Request from Advanced Level User.
1. Copy and Paste Comp settings to Other Selected Comps
We are creating Motor Shows for major Automotive clients and often need to resize animated stings etc. in various different formats and clients often change things whenever they like.
When a client says could you change the resolution of that master render or the framerate then it would be great if you could copy composition settings and apply them to all the nested compositions that you choose. This should be similar to copying footage interpretation and pasting the info to a selection of video assets.
To elaborate, take the scenario where you have a file rendered at 1024x768 @ 30fps. The client says please make it PAL 720x576. Simple: you just put the master output into another comp and scale down to the new size. The 25fps would be reducing frames so that should be fine also. Now the client says they need a 1280x720p @ 50fps version that they forgot to tell you about. Now you could put the 1024x768 comp into the new 720p size and crop top and bottom. But you would have to scale UP the width from 1024 to 1280. Increasing the framerate would only work if you switched on collapse transformation in all of the nested comps, lets assume there are 50 of these due to the nature of this streamlined composite. Collapse Trans. or Grow Bounds is of course an option but not always relevant. Often the only way is to trawl though a chain of Nested comps and manually change size, framerate etc. The process of neatly nesting and working at the highest resolution needed is good practice. But often clients do not tell you about that 'big' version they need too, so speaking in hindsight is of little use. It happens often.
If you could simply change the size of the master output comp and then copy it's settings, select all the nested comps in the Project Window and then paste the settings into all the nested comps you would have saved a lot of time.
Shari.

Dear Steve,
Thank you for that superb feedback. It was a great place to start and eventually I arrived at a script called selected_comps_changer.jsx by Chris Green.
If anyone else needs it then it is here:
http://www.crgreen.com/aescripts/actual_scripts/Selected_Comps_Changer.jsx
It does exactly what it says on the box.
Many thanks again,
Shari.

Feature request: superscript format

Similar Messages

Maybe you are looking for