[Feature Request] Wap321 SSH/Telnet Support

Dear Cisco Developers,
we are facing a problem with your design choice of not to support Telnet/SSH on the Wap321. We bought this Product because it was one of the only Access Points with SSH and Telnet Support.
We need the SSH Support for a script that changes the WPA-psk key of the interface wlan0 on more then 20AP's every Week. Everything was good until we got hold of a new charge which came with firmware version 1.0.1.10.
Changelog:
"Due to security concerns, Telnet and SSH access options are removed in firmware version 1.0.1.10."
So I talked with the German Cisco Small Business Support and he said he will investigate and try to get it to the Second Support tier. Well it never came to that, he called us two days later and said that is was a BUG to Support SSH and Telnet on the WAP321 and it was never designed to be a Feature.
So i guess we have following options:
1.Bring back the SSH Support for the Wap321 in the next Firmware update
2.Provide Firmware version 1.0.0.3
3.Give me a Workaround for my task
So any help would be appreciated and i hope we are not the only ones that would like to see a comeback of this feature.
In hope for comments
Best wish
Fabian Schwarz
(PTA-Support)
PS: Support Ticket was
624972937

No Sir I do not.
According to the response from L2:
SSH is only enabled for customer to use it on switches.
Developers normally do not allow SSH (enable or protect with password) for end
user on any Wireless device. Management is done by web interface.
In this particular case SSH was enabled only due to some bugs which were
monitored during first release so it is not meant to be for end user.
Because of particular security risks, SSH is for troubleshooting by developers.
Currently there is no chance that they would issue any official firmware for this as
well as there is a little chance they would create special firmware for just a few
customers.
I am sorry for any inconvenience that this has caused.
Eric Moyers
If you like you can roll the mouse over my picture and get my actual email address and contact me directly.

Similar Messages

Blackberry Complaint / Feature Request - Please add category support for calendar Items already

RIM: It's December 2010, and thousands of people have repeatedly asked for category support for calendar items for years now. In BB OS 5 & 6 we can assign categories to Contacts and Task items, but still not Calendar items? This makes no sense to me.
Many people rely on categories to keep their calendar items organized, and I'm baffled as to why such a simple feature request has continued to be ignored. Obviously BlackBerry's DO support Outlook/Exchange category syncing, since I can see all of my custom categories through the Task and Contact apps. When I add a new category for a contact, it gets synced between Outlook/Exchange and my Blackberry. The support is there. But for a professional/business smartphone OS, I'm taken back as to how this feature could be missing from the calendar in the first place.
Rim, please give us a response--a glimmer of hope--something to let us know that you are listening to us and plan on incorporating a category feature into the calendar! If the Blackberry OS didn't support categories at all, that would be a different matter and I would understand that maybe bit more development would be necessary to support this. But the capability is obviously already built in!!!
PLEASE listen to your customers RIM and give us this commonly requested feature as soon as possible!!!

You're welcome.
I'd also suggest you call your carrier blackBerry tech support and make the point there, asking them to give it consideration on the next OS upgrade. RIM does listen to their partners.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Feature Request - Better Multiple Monitor Support

Lightroom's support for a second display has definitely helped my workflow. I hope the team will consider adding more flexible multiple monitor support in version 4. Here's why.
I've recently experimented with running one of my three screens in portrait mode. When this screen hosts Lightroom's secondary display window in Loupe view, my verticals finally get equal real estate for editing. While I've not done hard statistics on my library, I know more than 50% of my imagery is in portrait orientation.
I'd like to see LR V4 support three or more screens so I could set up as follow:
Screen 1 - main lightroom interface, would not need to be calibrated, for controls and navigation
Screen 2 - Portrait orientation, loupe view - this would be a calibrated display, all develop changes to verticals would be judged on this screen
Screen 3 - Landscape orientation, loupe view - another calibrated display, all develop changes to horizontals would be judged on this screen
If Adobe could make the app intelligent enough to route the image to the correct screen based on orientation (recognizing and respecting cropping that could change orientation) my edit sessions would certainly speed up and I could maximize the productivity of multiple screens.
I'd be happy with this, but I'm also stymied by the need to switch back to Library mode to tag images when my primary workflow has me in develop. Ultimately everything depends on the quality of the image. Before I invest in image-specific meta data, I have to process or at least "test-process" an image. IMO the Quick Develop panel is useless, once you become accustomed to the granular control of the develop sliders, it just doesn't cut it.
In the three monitor setup I described above I'd love to be able to configure screen 1, with a combination of panels from Library and Develop, so I could stay "develop centric" with immediate access to keywording and meta. The two additional screens would intelligently handle image display.
I think this might speed my workflow by 33% and having just returned from a Tour de France project that generated 23,000 images I need all the productivity help I can get.

VeloDramatic wrote:
Thanks for all those votes Rob. Now we just need to get the other 999,999 on board.
Actually, this topic has come up a lot on this forum. At this point, I think we just need to get Adobe on board.
VeloDramatic wrote:
There may be another thread for this one additional thought. If Adobe does improve multiple monitor support, we should be able to optimize our previews for those screens. Even after prerendering 1:1 previews there are issues with DEVELOP doing its own thing (I believe) each time a new image is loaded. I make extensive use of the PREVIOUS button moving through my shoots and there's always a lag of one or two seconds while the develop preview loads before the button is active. In a desktop environment where multiple screens allow landscape and portrait images to be displayed full screen I'd argue that 100% of the host screen resolution would be the ideal preview. Hope that made sense.
Yes, faster switching would be nice. I'm not sure what that would take. As it stands, there's like "9" previews generated when you do 1:1s - 100% down to tiny thumbnails. Still, one at exact monitor size that does not need to be resized at all does seem like it would be the fastest - I'm a bit on a limb though at this point.
Rob

Feature request - More ID3 tag support (Key, label etc)

As the subject suggest, please include more ID3 tag support, I'd love to manage my library in iTunes alone, but now I rely on other applications to enter various bits such as:
- Key
- Label
- Catalogue nr.
and I'm sure there are a few others you can think of; but these 3 would be on my short-list.

You are not addressing Apple here.
You may leave feedback for Apple at:
http://www.apple.com/feedback

Feature Request: LR stereo Photography support

I would really like to see LR support for stereo photography. Ideally the possibility for adjusting stereo-photographs. But at least import support for .jps, pns and .mpo files.
This way people who use 3rd party programs to edit stereo photographs can still benefit from the version and catalog management of Lightroom.
I know stereophotography is a small niche. But I consider Lightroom to be the end all photo management solution. And I know stereo photographers would love adobe for supporting them.
Keep up the good work.
Remco

VeloDramatic wrote:
Thanks for all those votes Rob. Now we just need to get the other 999,999 on board.
Actually, this topic has come up a lot on this forum. At this point, I think we just need to get Adobe on board.
VeloDramatic wrote:
There may be another thread for this one additional thought. If Adobe does improve multiple monitor support, we should be able to optimize our previews for those screens. Even after prerendering 1:1 previews there are issues with DEVELOP doing its own thing (I believe) each time a new image is loaded. I make extensive use of the PREVIOUS button moving through my shoots and there's always a lag of one or two seconds while the develop preview loads before the button is active. In a desktop environment where multiple screens allow landscape and portrait images to be displayed full screen I'd argue that 100% of the host screen resolution would be the ideal preview. Hope that made sense.
Yes, faster switching would be nice. I'm not sure what that would take. As it stands, there's like "9" previews generated when you do 1:1s - 100% down to tiny thumbnails. Still, one at exact monitor size that does not need to be resized at all does seem like it would be the fastest - I'm a bit on a limb though at this point.
Rob

Feature Request – .mac web gallery support

Would be great, if you could upload your photos to the .mac web gallery and if my customers had the possibility to rate and select pictures there. Also subfolders (subevents) for the .mac gallery would be great!

You need to post that here:
*http://www.apple.com/feedback/aperture.html*
Regards,
Steve
Message was edited by: Stephen Ives

Feature request: Slideshow module support for video files

I'm very excited about your MTS support!
Feature request: Slide show module support for video files...
Say you have 10 takes to choose from. Are you able to almost like SLIDESHOW view the 10 clips full screen so you can decide, like a playlist? Or rate them as they play? It would also be great, like SLIDESHOW to be able to export a MP4 with a title, the 10 clips you are working with, and maybe add an end title and a song, just like SLIDESHOW.
I have found editing stills like this in slideshow far faster than in any other editing program.
Basically, I just need a fast means to view or export an MP4 of a set of video clips to review. You are almost there.
great job!!!
Max

I was also disappointed that video is not supported in the slideshow module -I currently have to use another solution when I want stills mixed with videos, would be great to be ablo to keep it all in LR!

SSLSocket to support NIO - feature request voting

Hello All,
I know there were many discussions here regarding this subject.
I've seen the SSLEngine solution for the problem... But I didn't like it since it is too complicated.
For my understanding SSLSocket inherits Socket so an application that can handle Sockets should be able to handle SSLSocket without writing a specific code besides the factory.
NIO allows Socket to be none blocking... So why SSLSocket which is a Socket does not?
If I write a Web server in Java, why should I deal with none SSL and SSL connections in a different way?
I recently wrote one threaded NIO server and was amazed that I could not use SSL with the same implementation.
I've opened a feature request for Java, but they told me to gain support for this subject here before they will consider it...
As I understand I can re-implement SSLSocket to use SSLEngine and support NIO with blocking and none blocking support... But I think Sun should do it.
One caveat is to make sure that the SSLSocket HandshakeCompletedListener should be called by a daemon thread, so that it will not block other sockets while certificate verification occur.
Of course when I refer to SSLSocket I also refer to SSLServerSocket.
Can you please comment regarding this issue... Every comment will be welcomed!
Best Regards,
Alon Bar-Lev

nah, I am very glad they released an engine separate from transport allowing encryption on any transport.
I am also working on an abstraction of nio that you may be interested in if you don't want to do the security yourself......it is here...
http://sourceforge.net/projects/channelmanager
Right now, it only contains the api, but there are 3 implementations behind it right now with 3 to be added.
1. Basic implementation that does just nio
2. Secure implementation that implements same api and uses implementation 1
3. Packettizer implementation which puts things in payloads with headers and footers
4. (to be added) Threadpool implementation allowing a threadpool to be inserted in the stack somewhere
5. (to be added) TestProxy implementation allowing exxceptions to be thrown on purpopse to test a system on a bad network....can test failure on bind, connect, read, write, etc....everything.
6. denial of service layer.
7. Exception catch layer to protect #1 and #4 mainly from bad clients that throw exceptions back to the channelmanager.
Each one of these layers (2 - 4) implements the same api and uses the same api so 2 -4 are all proxies. You can reorganize the proxies as you want.
The secure one is almost done. Any comments on the api will be welcome.
thanks,
dean

Feature request: more xpath support in XMLElement

Hey guys,
Just wanted to submit a feature request. I'm trying to write code to find the number of Invocation service threads that Coherence uses. It would be very nice if I could use XPath syntax such as the following:
getSafeElement("cluster-config/services/service[@id='3']/init-params/init-param/param-value")
Since the API doesn't support that, I have to resort to something like the following:
XmlElement services = com.tangosol.net.CacheFactory.getClusterConfig().findElement(
        "cluster-config/services");
List servicesList = services.getElementList();
for (Iterator i=servicesList.iterator(); i.hasNext(); ) {
    XmlElement element = (XmlElement)i.next();
    if (element.getAttribute("id").getInt() == 3) {
        XmlElement value = element.findElement("init-params/init-param/param-value");
        System.out.println("invocation threads: " + value.getInt());
}I haven't quite gotten that to work yet, but it's probably close. :)
Thanks,
Matt

Matt,
There is a helper function in com.tangosol.run.xml.XmlHelper class that makes it almost as easy as using the XPath.
XmlElement xmlCluster    = CacheFactory.getClusterConfig();
XmlElement xmlInvocation = XmlHelper.findElement(xmlCluster,
        "cluster-config/services/service/service-type", "Invocation");
XmlElement xmlThreads    = XmlHelper.findElement(xmlInvocation,
        "../init-params/init-param/param-value");
System.out.println("invocation threads: " + xmlThreads.getInt());Regards,
Gene

Feature Request: iTunes support CD drive letters A&B

Not sure how to submit this feature request to Apple for iTunes for Windows enhancement so I figured I would start at the forum.
I know in the "dark ages" drive letters A&B where pretty much reserved for floppy drives. Not sure how many computers are actually still in use running Windows XP and up that still have one of those drives.
Therefore, for some time now these two drive letters have gone unused. C: in general was the first HD letter, and CD-Roms (or now DVD/Blu-Ray) drives started somewhere with D: and above depending on your computer configuration.
I changed my setup a while ago and named my two DVD drives A & B since Windows supports it just fine, as do a lot of other programs, with the exception of iTunes :-(. For some reason, iTunes will not support reading CDs from drives A or B, even if Windows autorun feature is enabled asking if it should import the CD into iTunes. Apple, what's up with that? Why actual restrict reading music from CD drives assigned letters A & B? Is this an old piece of code still lingering around in iTunes?
So, simple feature request for an upcoming iTunes release, please enable reading/important CD music from drives labeled A&B so that we can start using these letters again as well.
Anybody else want to support this simple request that should be fairly easy for Apple to implement?

We're a user-to-user community, so there's no guarantee that an Apple person will see your request. But you can make enhancement requests directly to the Apple folks if you like. Here's a link to the iTunes product feedback form:
http://www.apple.com/feedback/itunesapp.html

Feature request: Support for more than 2 monitors

I currently use an external monitor for my critical editing/evaluation as my iMac display doesn't reproduce reds very well. I understand newer iMacs can support 2 external displays, obviously desktop machines can support as many displays as there are open slots for video cards.
While editing a photo shot in portrait on a monitor set for landscape is not a problem, it would <really> be cool to have two external color-accurate monitors for developing/loupe views, one oriented in portrait, one in landscape, with the third (iMac in this case) showing the develop controls. Even if the two external monitors showed the same image, one would always be fullscreen in the correct orientation.
MacOS and Windows both give the user control over all the displays connected to a given system, so driving a portrait and a landscape monitor simultaneously shouldn't be a problem from an OS/hardware standpoint.
Is this something that can be rolled into LR4?
Respectfully,
Andre

I use 3 or 4 monitors too, so that's one I'd like to see too. We wouldn't want the request to get lost in beta land, so might I suggest adding the request to the Feature Request forum http://feedback.photoshop.com/photoshop_family where it can easily be tracked? If you post the link to your request here, others can also vote on your request.

Feature Request: support previews for png files

hello,
i like to see previews supported for png files. This is a common file type and should be supported Especially since it is one of the options supported for export to creative cloud from photoshop touch. It would make a lot more sense.
Thanks.

You would want to go here for feature requests: Photoshop Family Customer Community
Gene

Feature Request: Support for External Synths/Modules (via MIDI)

Hi,
I just posted a feature request (via the Apple Feature Request form) but also wanted to post here. I use a combination of hardware instruments (sound modules) and software instruments.
*My Setup*
- Keyboard #1: M-Audio Axiom 25 (also includes a USB MIDI interface)
- Keyboard #2: Roland A-33 Controller Keyboard (via my Axiom-25's MIDI In)
- Edirol USB MIDI Interface (sound modules plugged into MIDI Outs)
- Sound Module #1: Roland JV-1080
- Sound Module #2: Yamaha TX802
MainStage currently takes care of all my software instrument needs, however, what is missing is the ability to add external physical MIDI devices as either patches or as channel strips. I would like to use a combination of software and hardware instruments in the same song, and control this via Mainstage.
Example:
- Patch 1 could potentially contain 2 software instruments, each seperately controlled by a physical keyboard (this is currently possible)
- Patch 2 could contain 1 software instrument and 1 external sound module each controlled by a physical keyboard (this is currently impossible)
- Patch 3 could contain 2 external sound modules, mapped to different ports and/or channels, and therefore independantly controlled by my 2 keyboads (this is also currently impossible)
Would I be correct in assuming that this is a fairly common limitation of MainStage?
Message was edited by: olafwagner

I have achieved MIDI out from Mainstage, thank to the information found on this forum..
what I actually do is send Prg Change from every preset I select to control a hardware vocal harmony pedal. this way i don't have to remember which setting i use on every song or even, section of a song.
*Step 1:*
Library>application support>Logic> create a folder named precisely MAINSTAGE CALLBACKS
inside of it, create an applescript with this code
on action(parameter)
set myprogramchange to programchangenumber of parameter
tell application "MidiPipe"
MIDISend toPort "MidiPipe AppleScript Input" withData {192, myprogramchange}
end tell
end action
*step 2*
download MIDIPIPE from http://homepage.mac.com/nicowald/SubtleSoft/
and install it in your apps folder
*step 3*
start midipipe, and define the following modules
MIDI IN-> use applescript input from menu
MIDI OUT-> route to your midi interface desired output
save this to a Midipipe file you can easily access
Now, when I go to a gig I FIRST (this is important) load midipipe and my preset, and just hide it and let it work in the background
Start mainstage, and set the program change of every PATCH to what I want to be sent over MIDI OUT when I enter the preset (-1 if needed or modify the previous applescript).
Ok, this just gives you Prg change... if you want something like CC or others, you can look at some of the example files on midipipe, and write your own applescripts to be used from a control within mainstage (you know, select a screen control, and assign it to an applescript located in library>application suport>logic>Mainstage scripts. you have to tell the applescript to receive incoming data from mainstage and send it (with even some filtering or transforming) to midipipe to go to the outside world.
One last idea: i used a free plug-in called MIDIIO that, although the plugin analysis on mainstage might say does not pass, you can use it anyway, and lets you insert it as if it was a plugin instrument...then you just route your screen controller to a MIDI parameter on that track, and there you go...but in the past it was not as solid as the midipipe solution.
I am still investigating...I am pursuing having my hardware controller knobs to follow screen settings everytime I just change a patch, but lack some info on how to get parameter values when entering the patch ¿anyone knows, blueberry, zuelito...? I promise to share the results!
best

Feature request - Support for rewire

Obviously a lot of musicians use Flash Media Live Encoder so I was wondering if FMLE supports Rewire (from Propellerhead Software). I am aware Adobe does implement rewire into audition but what about FMLE?
I want to be able to use my audio app plugins and for rewire to appear as an option as the audio source so I can get reverb and effect on my vocals / guitar,
I would think this would be a popular feature going forward.
Is it possible? IF not what are the chances of adding support? Where should I make a feature request if this is not the appropriate place?
Thanks
Paul

Hi,
I've logged an enhancement request on this.
Thanks,
David

Feature Request: Collection Support

I already submitted this as part of a long laundry list of feature requests. Its becoming pressing enough that I thought it warranted its own post.
The purpose of this feature is to allow collections to be built using any programmatic algorithm combining information available ala SDK or XMP. Example function calls:
- LrCollections.createNewCollection( collectionName, clearIfAlreadyExisting )
- LrCollections.addToCollection( photo )
That would do it.

Dynu.com uses a HTTP-update mechanism. So you can change the updater-settings in your config to match the syntax from dynu. The URL is shown in their SDK: http://downloads.dynu.com/files/basic_sdk.txt
Sent from Cisco Technical Support iPad App

[Feature Request] Wap321 SSH/Telnet Support

Similar Messages

Maybe you are looking for