Feature suggestion: bi-langual - need hotkey to disable autocorrect

Hello
Having another native language selected for keyboard layout also decides the autocorrect language.
I am Danish, but every day I will use english as well. i cannot describe how big a ******* pain the native autocorrect is, when trying to write in english.
Since the iPad does not recognize me writing another language, the suggestions are idiotic. Many of them not even in my own native language.
Therfore please: it would make the user experience so much better, if you would include a hotkey in the keyboard layout to enable/disable autocorrect. It would even make it bareable that you included words like mé and dó in my native language autocorrect. These words do not exist. They are however very persistent when trying to write in english.
Thank you.

These are user-to-user forums, they are not monitored by Apple. If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html
You can have more than one keyboard layout selected in Settings > General > Keyboard > International Keyboards, and if you have more than one selected then you will get a 'globe' key at the bottom of the keyboard that will allow to switch between them, and therefore have a different language for auto-correct.

Similar Messages

Attach 64TB disk(s) to Azure VMs - please vote up this feature suggestion if you need it too

http://feedback.azure.com/forums/34192--general-feedback/suggestions/6555737-attach-64tb-disk-s-to-azure-vms
Each Azure storage account comes with 500 TB of block blob storage capacity. However, this vast storage
is not available to be used via an Azure VM.
The best we can do right now is attach 16x 1TB disks (page blobs) to an A4 or bigger VM. This poses few
problems:
1. 16TB is way too small for many use cases such as using Azure as backup/DR target
2. This coupling of storage to RAM/CPU is undesirable and drives enterprise clients to other cloud providers.
When will Microsoft provide us the ability to make VHDX 64TB+ files in Azure block blob storage and
attach them to Azure VMs?
Dozens of cloud providers make such functionality available. When will be able to have the same in Azure??
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

This is a useful feature. I have voted it. Thanks Sam~~
Regards,
Tough_v

Keyword Bugs and Some Keywording Improvement / Feature Suggestions

Tagging Bugs and Some Improvement / Feature Suggestions
Please excuse where I should use the word Tag or Keyword or vice versa!
1.       BUG?    If a tag synonym is added or changed then all affected photos should be marked for re-publish. I do not think this currently happens.   Should this possibly be considered a bug?
2.       BUG?    When viewing a smart collection in a Flickr publish service and a new tag is added to a photo it is correctly moved to the “requires re-publish” section.   However … the thumb selection in the grid moves to the next photo, the loop view remains on the photo just tagged and the key wording still reflects the just tagged photo.    The selection shown in the grid appears to be wrong.      When working quickly this can result in tagging errors as the user looking on the grid believes he is working on the next highlighted photo in the grid.      This is surely a bug?
3.       BUG?      A minor point and I realise this is probably not the correct way to do things … but a double word synonym entered with quotes for example “Ice Climbing” will create two tags “Ice” and “Climbing” at the flicker end of things.    Removal of this synonym and forcing a re-publish does not delete these two tags at the flicker end of things.    I may have miss-understood, but perhaps it is best for LR not to allow quoted tags?
4.       SUGGESTION      An easier and more powerful way to review tagging of current photos should be provided whereby it is possible to clearly see the current tagging of a photo and have immediate access to the keyword list at the same time to make corrections.    Having both the Keywording and Keyword List panels open in Library mode results in a lot of up and down scrolling for me and is a slightly inelegant UI in my opinion.   I would suggest it should at very least be possible to have the tags viewable in Loop info as an option - so long as no truncation is made and all tags visible.    Ideally a better way should be sought.
5.       SUGGESTION      It would be very useful when reviewing tagging to select to show all photos in the currently selected folder or set which do not contain the selected tag.    Note, I don’t think this can be easily achieved by using a keyword filter and selecting all keywords and unselecting the tag of interest as the pictures may have many tags.    The same might be performed by textual based searches but this is inelegant and its slowness precludes a browsing approach.     For example – for me it would be useful to look at all my mountain shots in a trip which have not been tagged with “Glacier” and it will be immediately visually apparent where I need to make tagging corrections.    I would suggest a “Not” checkbox is made available on the top of each column in the library filter – this may also provide a great deal of power for other situations.
6.       SUGGESTION      It would be useful to allow a means of showing all pictures with a certain tag but which have not been tagged yet with any children of said tag.   For example all pictures tagged with Glacier which I have not yet named the glacier by introducing a relevant child tag or selecting an existing child tag.    A similar situation occurs for wildlife and potentially many other scenarios … I would like to use a tag “Butterfly” which I can quickly use on my first pass… and then do the identification and child tagging on a second pass using appropriate filtering.   This allows for a step wise or “top down” approach to tag classifying things in a workflow.    I appreciate this can be achieved (as I do now) by using a child tag called “Unnamed butterfly” or “Unnamed Glacier” but it seems more powerful, elegant and generically applicable to be able to filter on a “not tagged with a child” basis.
I apologise if I have missed the point on some existing functionality on any of these points and welcome any suggestions.

This is a great post.
I couldn't have written it myself better.
I'm also in dying need of Korean input as I can't communicate with my Korean friends.
But I second every point.
I hope the tech teams are reading this.

Backlighting Feature Suggestions?

Where the heck is the iPod feature suggestion area?
There definitely needs to be separate backlighting controls/timing for running on battery power and running on AC/DC/USB power.
Powered example: when I'm plugged into my car connection, which is powered, I want to be able see the display. Would be nice to do that without scrolling through the menu everytime. The display is impossible to read dark.
Battery example: when the iPod is in my pocket, backpack or whatever running on battery power, it doesn't need to remain backlit long. I can't see it anyway.
Seems like options to set for each type of power would be useful to most users.
I primarily listen in my car and via the home stereo. I rarely run on battery power/headphones.

I don't want to have to manually set the backilight setting for whatever condition I am using the iPod. It should be smart enough to know when it is connected to a power source and when it is not.
When it is connected to a power source I want the opition to set it to "Always On" and when I am on battery I want it to automatically set to a specified amount of time (i.e 5 seconds).
I also like the option of having it cycle on for a few seconds when the song changes.
Dell Windows XP

ITunes User Feature Suggestions

I think it would be beneficial for Apple and the users to have a dedicated thread
for User based feature suggestions ,So with this in mind I hope you add this as a sticky or ad this as a category all it's own .

A built in album art/pdf. viewer : As Music makes it's change more and more over to digital distribution artists are making the art/packaging available in.pdf and ,or embed in the mp3's themselves however the user "experience" in this is laking .
A built in viewer for the "digital booklets " and embedded art would add that missing streamlined sexy appeal we mac users are missing and accustomed to .

Adobe Elements redemption code? hat do you suggest? I need the serial number to activate and can't find a phone number to call anyone to help!

I bought Adobe Elements in a box. I have looked for the redemption code and taken what appears to be a code from the back of the box, and another from the envelope. They don't work. What do you suggest? I need the serial number to activate and can't find a phone number to call anyone to help! Please contact me at [removed]
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Who do you contact with Aperture feature suggestions?

Who do you contact with Aperture feature suggestions?
Anybody have Joe Schorr's email address?
Photographer Brian Fischer, Atascadero CA
[email protected]

There's a "submit feedback" menu item in Aperture itself. Use that

Firefox home doesn't load my bookmarks ? I have tried to do everything that they suggest to fix the problem from disabling the add-ons to reseting my data. nothing works, and yes I did check to see if private browser is not on. I am running window xp and

firefox home doesn't load my bookmarks ? I have tried to do everything that they suggest to fix the problem from disabling the add-ons to reseting my data. nothing works, and yes I did check to see if private browser is not on. I am running window xp and everything is up to date.
== This happened ==
Every time Firefox opened
== from the first time I tried it.

Are you talking the the Firefox Home iPhone App?
If not, please explain what you mean a little clearer.
This is the location of the '''Firefox Home iPhone App Support Forum''':
https://support.mozilla.com/en-US/forum/6

Do In need to manually disable JAVA in LION to protect from FlashBack?

Do I need to manually disable JAVA in a new installation of LION to protect from FLASHBACK or does it install with JAVA disabled by default?

It's disabled by default. But that's assuming a new installation or on a new Mac.
It's easy enoug to double check in Safari>Preferences>Securtity.
Also, double check Java prefernces systme wide by launching the Java Preferences from the Utilities folder inside the Applications.
If it asks you to first install Java then click Not Now. If it does open prefernes, make sure they are unchecked in the General tab.
Here's a good overview that OSX Daily published a while back.
http://osxdaily.com/2012/04/07/tips-secure-mac-from-virus-trojan/
Matt
Message was edited by: Matthew Morgan

SNMP need ot be disable so the printers can show online

I have an old question:
I had to disable SNMP in printer port configurations so the printers can be not offline.
Why and what caused these issues? We have tons of printer devices , only few are shown offline and need to manually disable SNMP in the tcp port settings to make them online.

Hi,
Please make sure that you have the same SNMP configuration on the printer device with what you have on the port used on the print server.
Also, make sure that the SNMP community name is "public".
Similar threads:
Windows 2008 R2 - Printer "Offline" SNMP issue.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/be2d661d-1595-40d7-bdd1-5372085bf810/windows-2008-r2-printer-offline-snmp-issue?forum=winserverprint
Printers offline in windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/80b06f0d-3b81-4cc6-95ad-aabc781d1eb0/printers-offline-in-windows-2008-r2?forum=winserverprint
Thanks.
Jeremy Wu
TechNet Community Support

How to disable AutoCorrection just 1 language?

I would like to know how to disable AutoCorrection seperately, because i have 2 languages on my ipad.

There is no way to do that. To have the right autocorrection apply to the right language, you need to switch between keyboard layouts.

How to hide/disable certain features in left panel, need help...

Heya,
So I upgraded to Leopard recently and I see that Mail has some lovely new features that appear in the left panel. Things like "On My Mac", "RSS", "Reminders" and my IMAP drive. Basically all I want to see is my "Inbox" drop down (this connects to GMail via IMAP) and all of it's sub-folders - nothing else.
I can't seem to figure out how to "turn off" these other features, can anyone help?
Thanks!

I will have to experiment, when time permits, to see if a user created folder on the server appears both places for me. I think it should only appear in the lower section of the Sidebar. In the meantime, please review the info at the two links below:
http://mail.google.com/support/bin/answer.py?answer=78892#
and
http://mail.google.com/support/bin/answer.py?answer=78755&ctx=sibling
for consistency with what you are doing and observing?
A Gmail account is not exactly a POP is accessed as POP, and not exactly an IMAP, if accessed as IMAP. For example you are told to not use your own email client's Junk filter, but if you have more than one account, and that additional account is not Gmail, then you lose the ability for Mail to filter Junk for that account.
The bottom line is that every feature of Gmail is set to encourage your accessing via a Browser rather than an email client to expose you to the maximum ads.
Ernie

Feature suggestions for Lightroom 3

Hi team,
Here's a quick summary of some ideas for LR3. Not sure how late in the dev cycle you guys are (we've seen one public beta so far, I would expect 2 or 3 before you go RTM, and features have not yet been frozen according to my reading):
* Perspective correction / Keystoning: This has been mentioned a lot here and on other forums - a no-brainer, especially considering that DNG 1.3 specifications allow for it
* Individual RGB channel control: Something that Capture One & Bibble 5 also have. It's time LR added this feature also, I think
* Soft-proofing: Hate to bang the drum on this one, but the LR interface could benefit from a readout of which colour space we're operating in for the current image, along with the ability to change this (I would think a simple drop down would do the trick, similar to the Tone Curve type). This is especially true on account of the fact that Library and Develop use different color spaces to display images (not a bug, a feature - but an obscure one at that)
* Layers: While I understand the LR team's resistance to layers as a concept (or at least calling it that, since the Adjustment Brush effectively - and very nicely - implements layers in a fashion), it would be handy to have. For example - let me rearrange the order in which Adjustments are applied. As a panel in Develop, this could easily be ignored by anyone not wanting to use (or who doesn't understand) Layers as part of their workflow. Leaving it out to "keep things simple" is not a good idea, IMMHO. After all, LR is targetted primarily at Pro Photographers and Advanced Enthusiasts - who should know how to use Layers, or at least be willing to learn!
* If not layers, then perhaps a list of Adjustment Brush pins in a scrollable list, so I can select them based on the adjustments I've made. Perhaps I could then re-order this list? The key challenge here would be how best to label each one?
* Selections / Adjustment Brush: Having Bezier, Rectangle, Ellipse and Free-form as selection options (along with the ability to invert these easily so I can do "Negative" selections where that's quicker) would be fantastic - this is something LightZone and Bibble both have
* Paint with Preset: At the moment, the range of settings I can apply with the Adjustment Brush is limited to a half-dozen or so. I can't paint White Balance, Sharpening (at least not with masking), Noise Reduction, or HSL adjustments, for example. This would give me lots of very granular control. It would be fabulous if we had a "Paint with Preset" option or a "Preset Brush" that let me create a Preset, then paint it on at various opacities (combined with the ability to invert selections, this would be extremely powerful).
* Blend Brush: An alternative to the Paint With Preset might be the ability to "Paint with another Image" over the current one. This might be useful for blending multiple exposures (e.g. to remove people in landscapes, or to do simple selective HDR blending from multiple exposures). Having the ability to set the "Blend Mode" (similar to PS's Blend Modes) might also be helpful. I imagine this new brush would work in a similar fashion to the current Adjustment brush, only it would be combining information from multiple images. It might be useful to have a "2-up" display similar to compare mode that shows the "Source" and "Target" images side by side (with the ability to zoom in and out)
* Grayscale Wedge: Would it be possible to have a greyscale wedge that could be displayed beside or underneath an image in Develop? LightZone has a fantastic implementation of controlling image Zone information using a simple point and click on the wedge. Well worth checking out. It would certainly make adjusting tones in the image a lot more intuitive for some people. I think this concept could be taken a step further.
* Luminosity Mask: The ability to "Auto Mask" an image based on its luminosity (i.e. which Zone an area falls into) would be way cool as part of the Adjustment Brush. That way, you could control individual zones easily. I imagine this tool would have 2 sliders: "Luminosity" (from light to dark) - which would determine the "target" luminosity to Mask; and "Threshold" which would determine the "Width" of the selection in tonal terms. Holding down the Option key on either slider would show a dynamically generated Mask overlay to help me determine which areas the Mask is applying to
* Color Mask: See Luminosity Mask above. Same idea, but based on Color. Perhaps a Color Picker tool would enable me to isolate a Color and create a Mask (which I could then refine using the Erase or AB tools if necessary). This would have HSL sliders to select the target color, and a "Threshold" slider to control the "Tolerance" either side. Again, using the Option key would give me a preview similar to the Sharpening / NR tools
* Perhaps the Selection Tools, Luminosity and Color Masks above could be combined into a "Smart Mask" panel (or panels) in the Adjustment Brush tool, making it more consistent with the current interface, and making it much easier to create masks with the Adjustment Brush
* Ability to Maintain Color Profiles inside LR, without having to restart. I use the X-rite CC Passport to generate Color Profiles at almost every shoot. It might be helpful to have an easy way to maintain these Profiles (and to share them like we can share presets!). At very least, add an option in Preferences to open the appropriate Folder so I don't have to go hunting for it.
While the early LR3 beta is encouraging, I do think it is missing many user-requested features, and features its "competitors" already have. In my view, Lightroom needs to stay ahead of the curve to gain market share.
Once again, congratulations on creating a fantastic tool in Lightroom. It just keeps getting better with every version (LR3 looks amazing so far for an early beta - love the improved demosaic sharpness and NR).
Hope these suggestions are helpful.
Cheers,
Matthew

Six changes that would be basic improvements - sorry if these look like bug reports, but they have lasted through all the updates and upgrades and I consider them to be overripe for improvement.
For mouse-heavy users it would be helpful to have a Grid icon in the toolbar in the Develop module, the same as appears in the Library module.
The consistency of having a Done button in all places that present a secondary work screen would make leaving those screens simpler.
When organizing folders, keeping the focus local after a Delete would be good, instead of the focus jumping up to a higher level as it does, requiring a search for your location. If you're making a lot of changes this can be time-consuming and frustrating. I know some other program do this, but not all and it's solvable.
When moving a folder of files, the last file doesn't get moved and could wind up in some random place if you don't suspect this and go after it to move it by itself. This seems to be unique to Lightroom.
In leaving Compare, it's not clear which image you're keeping because the filename isn't visible, only the rating (if used). Changing the rating to exit can disable the Done button. To get it back it shouldn't be necessary to swap the images. Why not use a more standard release action like the Escape key?
In LR 3.3, when using the noise reduction slider the option to update the whole filmstrip to use version 2010 is available only if the demonstration "compare" screen is retained with a box checked. If you uncheck that box, there's no way to get that screen back the next time, so the option to update to 2010 for the whole filmstrip at once is gone and subsequently requires one-by-one clicking to update. This could be simpler and faster.
I use LR every day and teach it, but I may have missed something so forgive my naming ills that have already been mentioned. Thanks for listening. DKD

Windows 8.1 Pro Need command to disable "Use default gateway on remote network" option on VPN connection"

Hello!
I want to create bat script to create several VPN connection.
There is powershell command to create vpn connection:
add-vpnconnection -name "Test VPN" -serveraddress "vpn.example.com" -splittunneling -tunneltype "pptp"
And I need to create VPN connection without the option "Use default gateway on remote network" option on VPN connection"
Or modify this option on existent VPN connection with command.
Please help me to find command option or other command to disable "Use default gateway on remote network" option on VPN connection" feature.

http://technet.microsoft.com/nl-nl/library/ee431701%28v=ws.10%29.aspx RouteIPv4TrafficOverRAS True – Add a default gateway on the VPN connection False – Do not add default gateway on the VPN connection

How do you make an itunes feature suggestion to Apple?

I'm trying to find a place to make an itunes feature suuggestion to Apple, but all I seem to be able to find is a "request music" link...
If this is the only place, then here is my suggestion...
I am a video editor and I use itunes to play my music, but also to audition sound effects and production music tracks. But when I do a shuffle play of my entire library, I don't really want to hear these sfx and songs (or the audiobooks I've taken from an audiobook CDs).
Therefore, I think it would be useful if there was some kind of "flag" that said "this is not a song" or "don't include in shuffle".
Alternatively, what would be great for me, is if itunes could have multiple libraries, then I could have a normal music library, a sfx and production music library and an audiobook library.
Anyway, I guess I can dream.
Chris.

The iTunes feedback is confusing indeed. I use the general Feedback page to report bugs and to do suggestions.
They assure that the messages will be read, but you won't get a reply.
As this is a user-to-user forum, it is highly unlikely your suggestions will be read by Apple employees (except moderators).
You can exclude songs from shuffling by checking 'Skip when Shuffling' in the 'Options' tab of the Info window (Get Info of a song; shortcut: command-I)
Unfortunately, you can only do this song by song.
Using this script, you can enable/disable 'Skip when Shuffling' of all selected songs.
You could put the songs/sfx in a playlist, select them all (command-A) and run the script.
To run multiple libraries, you can choose between these two applications:
iTunes Library Manager and Libra.
Although not real instant switchable libraries, both apps. can create multiple 'iTunes Library' files, which enables you to have separate libraries for all kinds of files.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.4.7) Several ext. HD (backup and data)

Feature suggestion: bi-langual - need hotkey to disable autocorrect

Similar Messages

Maybe you are looking for