Features and Functionalities of ECC 6.0 for upgrade from 4.7 to ECC 6.0
Hi All,
Can you let me know the features and functionalities of ECC 6.0 as we are planning to go for upgrade from 4.7 to ECC 6.0...
Cheers
Prasanna
And you can see the PAM for your architecture.....
Do you want to use the JAVA instance?
Change from no-unicode to unicode?
Do you have MDMP?
Regards,
Alfredo.
Similar Messages
-
OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0
Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
SidHi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni -
Requirements for upgradation from 4.7 to ECC 6.0
Hi Guru's,
Can anybody explain what are the steps required for upgradation from 4.7 to ECC 6.0, technically and functionally. If any body have documents regarding the same, please share.Full marks will be awarded.thanx in advance....Hi
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
chk this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Reward points if useful
Regards
Anji -
Document for upgradation from 4.7 to ecc 6.0
HI Everyone,
Can any one pls mail me some helpful documents regarding upgradation, what all things needs to be taken care and many more.
my email id is <b>[email protected]</b>
Thanks in advance.
SunnyHi
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
chk this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Reward points if useful
Regards
Anji -
Upgrade from 4.7 to ECC 6.0 and MICR no longer printing
Hello,
We are in the process of upgrading from 4.7 to ECC 6.0. Our checks in FI and HR which have MICR fonts/lines are no longer printing the MICR lines. Any ideas on what to check?Hi Kenneth,
If you have any documentation for Upgrading from 4.7 to ECC 6.0 can you pls send it to me ?
Thanks
Christine -
Impact of ERP Upgrade from 4.6C to ECC
Hi All,
What is the impact and variations/additons with Impact of ERP Upgrade from 4.6C to ECC from Varinat configuration side.
BR,
Krishnahi krishna,
You may loose some of the variants becasue of changes happened during upg for ECC600.I have faced certain problems.
I know in the upgrade there is a phase(RSUVAINT(2) not sure) which does a backup of all variants and restores in the end.
regards,
vamshi. -
Check List for Functional Upgrade from 4.7 to ECC 6.0
Hi Gurus,
Cany anybody tell me what is the check list for SAP SD Functional Upgrade from 4.7 to ECC 6.0.?
My Email : [email protected]
Points for sure for useful answer
Venkat
Edited by: Venkat Goteti on Feb 4, 2008 5:34 AMIf it is possible can you send me file to [email protected]
-
Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money for that
Hi All
Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.hi,
asking or teling ?
I think you need not as long as you are with official support . However please contact sap official support in you region -
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridharHi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
ISU upgrade from 4.6C to ECC 6.0 (CIC)
Hello there
We are currently going for an upgrade from 4.6C to ECC 6.0
Can anyone of you provide some insight on whether the frontoffice and other configuration in 4.6C have any kind of impact on ECC 6.0? Basically I can see that there are new functionalities in ECC6.0 for CIC . But will the current config lin 4.6C like action box , move in/out processes, owner allocation etc will be impacted after the upgrade?
Thanks
GautamHi Gothic,
We are also planning to upgrade this month from 4.6C to ECC 6.0. It would be very nicce if we can share the information and the experineces.
We will do the upgrade in a pilot system.
We will have a new hardware with windows server 2003 64 bit and oracle oracle 10.2.0.2.0. than we will install oracle and SAP 4.6C and after that we want to export the Database from the production system to the pilot system. after that we upgrade the pilot system to ECC 6.0 to test first.
I do not know if there is an easyer way to do the upgrade or at least the test. Maybe a homogenouse system copy...?
Best regards
Atik -
Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)
All,
we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28.
The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown:
Message no. KG346
The variant does not adhere to the current Customizing setup
We have saved the variant again, and no problem are present, but the error message refers also to Customizing setup.
Is there a section in the Customizing where it is possible set up the field to show in the initial screen or the new fields (All Valuation Views, Legal Valuation View and Profit Center Valuation View) are due to the release upgrade?
If yes, do you know the transaction/path?
Thanks in advance for your collaboration.
Regards,
Jody Mancini.Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya -
Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query
Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
FROM COSP CLIENT SPECIFIED
WHERE GJAHR IN SELR_GJAHR
AND KSTAR IN SELR_KSTAR
AND LEDNR EQ '00'
AND OBJNR IN SELR_OBJNR
AND PERBL IN SELR_PERBL
AND VERSN IN SELR_VERSN
AND WRTTP IN SELR_WRTTP
AND MANDT IN MANDTTAB
GROUP BY (GROUP_LIST).
LOOP AT I_COSP .
COSP = I_COSP .
PERFORM PCOSP USING I_COSP-_COUNTER.
CLEAR: $RWTAB, COSP .
CLEAR CCR1S .
ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
endselect.
SELECT
into table
for all entries in table
where.
use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
e.g in your case
sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya -
Issues during technical upgrade from 4.6c to ecc 6.0
Hi
We are doing a technical upgrade from 4.6C to ECC 6.0. Some transactions in QM module when tested in ECC 6.0 test client give a abap termination message (or dump) and certain transactions like qs42,46, qa18, qs34 etc do not get executed (error = no entry foound for......) and similarly in PP-PI module transactions like C203 have similar problems, even though master data does exist. What should I look for? Can somebody pl. give details on configuration checks and the OSS notes from a functional point of view for a technical upgrade?
For certain transactions I get the error message - "Central system of distribution SM-P06CLNT430_TRUSTED is unreachable RFC destination SM_P06CLNT430_Trusted does not exist" - what does this mean?
thanks
BEHi,
1. Have you done successfull installation from 4.6C to ECC 6.0 at the time of PrePare ans SAPUP?
2. Check SP' for QM and PP-PI modules from http://service.sap.com/sp-stacks.
3. Configure RFC connections correctly, SM_<SID>CLNT<No>_Trusted automatically created, not manually.
http://service.sap.com/notes --> search for RFC trusted connections for Ecc 6.0
http://service.sap.com/upgrade.
Regards,
Srini Nookala -
Upgrade from 4.6c to ecc 6.0
Hi,
We are doing a technical upgrade from 4.6c to ecc 6.0 without activating New GL. As a functional consultant, what should i look for? I know that we need to test the business processes and check Z programs but anything specific, plzz let me know.
What changes should be made in Asset Accounting?
Regards
SatyaThanks for the reply.
What are the changes made in Asset accounting after upgrading?
I heard of RBE tool...how is it used for FI?? (u check for the mostly used transactions or what??)
Anyone, plzz answer..waiting for ur replies
Regards
Satya -
Upgrade from 4.7 to ecc 6.0
hi
it would be great help if you tell me about the upgrade from 4.7 to ecc 6.0 am an sd functional consutlant so wat would be my role in this upgrade and are the transaction codes and menu path same or have some changes in it and could please tell me some sd transaction code and some interview related question wat they ask while taking an upgrade interview for a sd consultant
thanks in advance
pritiDear Priti,
Visit the following link:
http://solutionbrowser.erp.sap.fmpmedia.com/ .......give source and target versions to find the difference.
Major difference is ECC6 is netwear product having WASJAVA+ABAP secondly support unicode apart from this we have other diff. you can get fom master guide from service.sap.com/instguides.
For installing ECC 6.0 you required a solution manager key.With out solutionmanager key you cannot install ECC6.0.
For ECC 6.0 is called netweaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key.It only having ABAP stack. 4.6C supports NONUNICODE.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/4d2091de9657bfe10000000a155369/content.htm
Hope this will help.
Regards,
Naveen.
Maybe you are looking for
-
Hi, I have a scenario HTTP> XI> RFC It is synchronos scenario. There can be HTTP timeout or RFC timeout. HTTP Timeout will return HTTP Error 500. In case of RFC timeout in XI I want to send timeout error in Response. Is this possible without BPM (I k
-
Order basic start date.
Hi, We are updating the basic start da of order using FM BAPI_ALM_ORDER_MAINTAIN. We are deleting the basic finish date and then updating the basic start date. I am observing the following: 1) For some orders, the basic finish date is recalculated, w
-
Can you Choose a Particular Frame for Quicktime Icon Preview?
Is it possible to choose a specific frame for a Quicktime file icon preview? A lot of movies start out with a black frame and the icon preview in Finder is therefore a black square. I would like to be able to choose the frame to use for the preview.
-
Finder goes white?!?!
Hi all! In the images below what was happened to my finder window during scrollbar moving. A 'kill -HUP <finder pid>' solve the problem but: what is this? How it happen? http://img233.imageshack.us/img233/2223/immagine1ro1.png http://img402.imageshac
-
My ipod only turns on when it's connected to the charger and it has a white screen
Help my ipod won't work white screen and only turns on while plugged to charger