Features I'm missing in PDFG ,Forms and Process management

PDF Generator:
I think that "Optimize scanned PDF" feature should be available in PDFG.
Something similar to "Shared review" functionality.
PDF Generator+Forms
DocConverter service should be able to flatten dynamic pdf forms not only static.Currently even if you have a licence for LC Forms and LC PDFG you have to purchase an Output to flatten dynamic forms.
Process Management
Support of RTL langueges in Workspace. Integration of TextLayout in Workspace project will be great.
LC Designer
Support of RTL langueges in Form Guides
Thanks, Yan.

Hi Henke,
the New feature of WAS 700 you can find http://help.sap.com/saphelp_nw2004s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/69f45201356248830f1e70fdd7178e/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/44b2420e71c511e10000000a1550b0/frameset.htm
You can find more info in Architecture manual and amdinistration manual.
regards
Anand.M

Similar Messages

TS17900100 in HCM forms and processes

Hi All,
For HCM forms and processes certain standatrd task and workflow templates are provided.
Out of them of the tasks is TS17900100: Process Form. I suppose this task saves the infotypes in the backend system.
If we see the object method for this class in PFTC, it is CLASS:CL_HRASR00_WF_COMPONENTS & METHOD: WI_EXECUTION_VIA_R3_INBOX. But this method seems to be a dummy method. There is no ABAP code in this method.
Would you please let me know where is the actual code which is executed for this task.
Thanks
Sameer Tapre

No, if I enter all the mandatory fields on the form then there is no problem. It allows me to move ahead and submit the form successfully.
As recommended by Siddharth, I tried debugging the message class and what I observed was it passes the complete_fieldname value as Personnel Subarea (I1008_BTRTL) and system expects it to be I1008-BTRTL.
SAP as a fallback tries to read description from the table T5ASRFSCNFLDT but it has a_form_scenario as blank and complete_fieldname has a concatenated value "Personnel Subarea (I1008_BTRTL)" instead of "I1008-BTRTL".
Not sure what am I missing which causes it to have this wrong error message.
Regards,
MK

HCM Form and Process ERROR No error agents maintained in table T5ASRERRORAG

Hi All,
I am setting up HCM form and Process and I am done with Setting up new scenario and form and workflow steps. When I do the check consistency for Processes I get these 4 error below and not sure what do i do about these error
No error agents maintained in table T5ASRERRORAGENTS
Case type for Step Object H_SO is not defined
Case type for Scenario Obj. H_FO is not defined
Case type for Process Object H_PO is not defined
Any help will be appreciated.
Thanks,
-Ashwani

Some elaboration would help here a LOT! Would it be possible to get some more info about it?
I am following this tutorial: http://help.sap.com/saphelp_erp60/helpdata/EN/42/f273461e5132c3e10000000a1553f6/frameset.htm
and didn´t find any "sub-chapters" about this. am I missing something? Or could you tell me the number of the tutorial step which I performed in a wrong way or did NOT performed?
Thank you, cheers Otto

MSS HCM Forms and Processes - Not accessible

Hi all,
I was trying to enable all standard HCM forms and processes accessible in MSS. However, I could only see 'Transfer process' available while accessing using Manager user. I assigned SAP_ASR_MANAGER role to this user.
All forms are active and accesible from WDA application from SE80 using a developer ID. However the same is not listed in MSS> Is there any other prerequisite which i am missing.
Thanks
Karthik

answered myself

Error while opening supplier/customer forms and payment manager templates

we are having 11.1.0.7 database and 12.1.1 E-business suite with 10.1.2.3 forms
user is getting
Error Page
You have encountered an unexpected error. Please contact the System Administrator for assistance.
while accessing supplier/customer forms and payment manager templates and this gets resolved after bouncing the application. the current instance is a staging one and this will be replicated to production so please help or suggest any solution or work around
thanks
pankaj

There should be a link on the error page for further details about the error. Can you post the contents of that error link page ?
Pl also check the Apache logs for any errors - see MOS Doc 419839.1 (How to enable Apache, OC4J and OPMN logging in Oracle Applications R12) for name and location of the Apache log files.
HTH
Srini

Attachment Buttons not coming in Task TS17900101 of HCM Forms and Process

Hi ,
We are using HCM Forms and process for changing employee organization unit which is linked with workflow for approvals.
In this workflow we are calling standard task TS17900101 .Till now every thing is working fine but the problem is with attachments as their is a requirement to show attachments button with this Approve and Reject Task. But as per my knowledge SAP has not given any option to attach documents with this task which is however only possibe through TS17900100.
So can u suggest any way to attach documents with Approve and Reject Task which is TS17900101.
Thanks,
Rahul

Hi,
i have the same problem and no idea how to solve it.
Please let me know, what enhancing module pool code helped you
Thanks,
Galina

HR Forms and Processes

Hi All,
I am working on design time tool for hr forms and processes.
I am copying the standard form for change in position attributes.
i have made the necessaryu changes in the form i copied from the standard one.
My issue is still do i need to install ISR libraryfor form layout?
I have actually cvopied the form scenario from the standard set up. So i just brought the fiels i want from stanadrd ISR Controls.
DO i still need to install ISR LIB?
Regards
Mandeep

Hi,
I think you might have configured two different pages thatu2019s why it is not appearing in portal. According to my knowledge you configure whatever fields you want in one form. Depends on fields it will take two pages.
Just give a try. It may works out.
Regards,
G K

HCM forms and Processes - Adobe

Hi,
I am working on HCM forms and processes( not QISRs ). I want to populate a drop down list based on the selection of another dropdown list, how can we acheive this in Adobe forms. Should I go about configuring some back end generic service? if so how will the backend service get triggered based on my selection.. Any idea on this is highly appreciated
Thanks.

Hi
To archive above functionality we can use below simple method, if u r expectig same functionality through operations and custom event give me some time i need to recall some functioality(At present i am unable to acces MY SAP)
Let my BADI name is   Z_Positions .
Letu2019s define two attributes in my BADI like E_DATE and DD1.
For to understand better create one methods as same as input and out parameters of Get_Help_Values method.
So my methods is F4_Vac_Pos
Method:- F4_Vac_Pos
            Read the entered value of the Effective date (by reading service datasets with passing key as filename =E_Date)
Once if we able to read the Effective date, cheek is initialize are not(value is there or not).
     If it is not initialize go ahead else return.
     If it is not initialize fill all vacant positions in DD1 based on by passing key as readied
                   Effective date.
Call this methods in get_help_values method.
From Configuration side:-
Created Effective_date and F4_DD1attributes.
Add your custom generic service to form (let assume service no is 200 ).
Go to the assignment of custom generic service; map the F4_DD1 form attributes to the BADI attribute DD1 and cheek default value and value help.
The same way map form Effective_date attribute to BADI E_date (donu2019t select value help option)
Now adobe java script:-
Write the below piece of code on click method of button
xfa.record.CONTROL_PARAM.ISR_EVENT.value = "USER_EVENT_CHECK";
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
Data Flow:-
Once the date is selected, click on the Button. As we know already for every round trip get_help_values method will call. Now it will call.
As already effective date value is mapped to one of the custom badi attribute, so we are able to read this value through service data set.
While filling DD1 values we are filtering data based on effective date. Now at badi level we are filtered vacant position based on effective date.
As this one is mapped to F4_DD1 form attribute, once round trip is completed u will see filtered vacant position based on effective date.

HCM FORMS and Process Initiator role

Hi,
Certain forms/process needs to be initiabed by only group of people,
Is it posible to restrict the process using the initiator role?
How to create the custom Initiator role in HCM Forms and Process?
Can i pass the directly custom intiator role as application parameter to the Iview?any other configuration is required to complete this requirement?
Thanks
Srikanth M
Edited by: srikanth chowdhary on Apr 28, 2010 6:17 AM

Hi Srikanth,
Yes it is possible to make the process initiate for a group.This can be achieved via roles in the process.But in case if you are using custom roles then you need to include it in the process .So that it is exclusive for that role alone.
For custom roles you need to create them in the processor role (yes configuration is required to be set up ).I don't think it is necessary to pass an application parameter for the custom role to the standard component.
Regards,
Aravind.P

HCM forms and process with single workflow

Hi Experts,
Can we use single workflow for multiple form scenarios?
Actually we have some 10 scenarios with 20 forms. We planned to combine all the scenario's in a single workflow and use it in different form scenario.
Is it possible or we need to create a separate workflow for each process?
Thanks in advance,
Helps will be appreciated.

Thanks for the reply Rick.
For normal workflows its fine. I would like to know for HCM forms and process will it allow or not?
HCM forms and process framework has come limitation's. Please check the below link.
http://help.sap.com/saphelp_erp60/helpdata/en/42/f2cd04249b3268e10000000a1553f6/frameset.htm
So I doubt will it make any issues.
Thanks.

HCM Form and Process Case Management Configuration

Hi All,
Can somebody help me with Case Management Config in HCM Form and Processes. I don't see the Cae Mgt config anywhere for HCM F&P on any documenttation or on help.sap.com.
This is the error I am getting when I am doing the Process COnfiguration
Case type for Step Object H_SO is not defined
Case type for Scenario Obj. H_FO is not defined
Case type for Process Object H_PO is not defined
Thanks..

Hi
If you get the error ' H_SO , H_PO , H_PO' , then the relevant case types are not defined.
IMG Path :
SAP NetWeaver->Application Server->Basis Services->Case Management.
Goto define case type -> Select Define Case Type . Change the case record model id for case type H_PO. This is the same id which exist in SCASE and SRMREGEDIT transaction.
Yes, the data is stored in case instead of the forms directly.
The archiving time period can be set like any other case types . From the above IMG path, if you drill in further , there is 'Set archiving' , where you can define the archiving period for the case types.
Hope this helps.
Best Regards
Saujanya

What are theadvantages and disadvantages of HR Forms and processes

Hi Experts,
Greetings!
Please let me know the use of and advantages of HR Forms and processes, What is the role of SAP HR/HCM Consultant role while implementing HR Forms and Processes.
Thanks in advance.
Regards,
Ram

Hi,
In HCM Processes and Forms the SAP HR consultnat define the
Process - it means "Depiction of a HR process flow in Personnel Administration using elements from HR Administrative Services."
ISR Scenario - it means "Used to call up an interactive form in a form-based process within HR Administrative Services. In the Internet Service Request (ISR) scenario you specify which form is used and the layout of the form."
Form Scenario - Together with the assigned ISR scenario, the form scenario provides the basis for a form-based process such as "Transferu201C.
This type of process runs through several roles that are integrated using interactive forms, and ends by modifying the HR master data.
A form scenario comprises one interactive form and is assigned to one ISR scenario.
Please find the following is the Best document on it .
http://help.sap.com/saphelp_erp2005/helpdata/en/43/1d63953fce3566e10000000a11466f/frameset.htm
Go thorw propery here you can find also how to use this in ESS and MSS .

HCM Forms and processes - Effort estimation of the requirements !

Hi Experts on HCM F&P,
I have following queries on HCM forms and processes.
1.
I understand that HCM F&P is both functional and technical ( majority of the work being technical here). But where do we draw a line as to what part of work is a functional activity and what is technical activity. For technical I do understand the form desig, workflow development is all technical. But however i am not able to understand what is the part of work on HCM F&P is to be classified as functional.
2.
When we get new customer projects how do we go ahead estimating the timelines for Functional consultant and Technical consultant. Fairly clear for technical that the timelines for designing the form with all needed logic in custom generic service and for the workflow development. But unable to really understand that activity that needs to be classified as purely functional activity and the timelines needed for this role.
I am very much interested to understand estimation on the functional side. Estimatation if there are standard processes to be enabled and implemented. And also if there are customer specific new processes needed. Estimation for the Blueprinting and Realizaiton needs to be understood for this.
I am looking at the parameters that needs to be considered here for estimating.
It would be greatfull if someone can give hints on this.
Note:Points would be given considering each as a separate question.
Best regards,
Sanjay

Hi Sanjay,
In HCM Process and Forms,
1. First you need to clear with the process that you are going to carry out.
2. Understand the process and indentify the infotypes, fields that need to be updated.
3. Also the infotype operation deletion, modification, Insertion, etc.
Above steps are get invoved with functional consultant
4. Create a process, add a fields.
5. create generic service if necessary.
6. Create a adobe form.
Above three steps are get invoved with functional consultant.
7. Workflow process to be defined from functional(first level approver, second level approver)
8. With the help workflow consultant, technical consultant will attahc the workflow to the process.
Blue print, Estimate depends on the Process(Simple updation or it get involved with more processes).
Hope this helps you.
Regards,
Meera

How to Integrate Oracle Imaging and Process Management(IPM) 7.7.10 with EBS

Hi All,
We are implementing the following modules from Oracle Content Management to one of our Client, the following are the versions of the tools:
Configure and deploy Oracle Forms Recognition (OFR) 10GR3
Configure the Oracle Adopter for integration of OFR with EBS Version 11.5.10.2
Configure the Adopter for integration of OFR with Oracle Imaging and Process Management (IPM) 7.7.10
I really like to have any technical design document on integrations front, especially from OFR -> EBS and also IPM -> EBS.
Please feel reach me on my following contact details:
[email protected]
Phone: 1865-582-2369
Mobile: 1865-202-6430
Any pointers for the same is well appreciated.
Regards
Chandra

Try replacing the .dll file with the one in your WINDOWS directory. I had that problem and I copied the .dll from C:/WINDOWS/system32 to overwrite the one located in the install directory.

Missing reports in Report and Layout manager

Hi Experts,
i need to convert with Crystal Converter some PLD Tax reports.
The problem is that under Tax Reports tree, in report and layout manager, reports of typecode 'RB01' are missing!
Why are they missing??
Is there any other way to convert them even if missing?
i can see them in the tax report form, selecting tax register block and press ok.
From the print layout designer they are listed.
Please help.
Thanks
Paolo

Hi Paolo,
What is your B1 PL? Have you solved your problem? Try to upgrade to the latest PL if you are not in it.
Thanks,
Gordon

Features I'm missing in PDFG ,Forms and Process management

Similar Messages

Maybe you are looking for