Features in new relase of vm 2.2

I just downloaded the latest version of Oracle VM server and Manager from Oracle site and installed them.
I wanted to know that are these features included in some beta version of Oracle server and Manager
and implementing it and supporting it.
BIOS of the VM's
Snapshot
Ability to create a serial port
Virtual switch which on a server or a manager which can talk to 2 different subnets.
Performance graph

The LVM snapshots are supplied by LVM2, which is a part of most linux distributions, including OEL and OVM.
OCFS2 1.6 also supports inode relinking, effectively giving you snapshot capability direclty in the OCFS2 filesystem.
Both technologies give nearly instant snapshots that consumes a minimal amount of storage. Combined with thin provisioning through sparse files, this is not just as good as VMware technology for saving space, it is in some ways better.
I think it likely that we will see OCFS2 snapshot support integrated in Oracle VM Manager 3.0. Until then, there are other solutions available such as LVM2 and other storage supported snapshots (NetApp/WAFL, OpenStorage/ZFS etc).

Similar Messages

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

List of features of new Patch level

Hello experts,
Can you advise how to find list of features of new patch level, would be great if someone shares the link.
Attached is one such sample. I am looking for features of PL 5 and 6 of 9.1
Thanks
Deepak

Hi both,
besides these info files or the corresponding overview notes which comes with every patch delivery, I just can recommend to check the Top Fixes document, highlighting the most important corrections which are being delivered in patches:
SAP Business One 9.1 Top Fixes on SAP PartnerEdge; SAP Business One 9.1 on Customer Portal
SAP Business One 9.0 Top Fixes on SAP PartnerEdge; SAP Business One 9.0 on Customer Portal
SAP Business One 8.82 Top Fixes on SAP PartnerEdge; SAP Business One 8.82 on Customer Portal
hope this helps,
Peter

How to activate turbo boost feature in new mac book pro

how to activate turbo boost feature in new mac book pro

Intel® Turbo Boost Technology 2.01 automatically allows processor cores to run faster than the rated operating frequency if they’re operating below power, current, and temperature specification limits.
Intel Turbo Boost Technology 2.0 is activated when the Operating System (OS) requests a frequency higher than the rated frequency of the processor. Whether the processor enters into and the amount of time the processor spends in the Intel Turbo Boost Technology 2.0 state depends on the workload and operating environment.
http://www.intel.com/content/www/us/en/architecture-and-technology/turbo-boost/t urbo-boost-technology.html

New Features and New Bits on the way

I have the pleasure of sharing some really big news with the community. The teams behind the FlexUnit and Fluint projects have worked together to produce a new version of the FlexUnit framework that combines the best of both of these frameworks.
The new version provides all of the features currently available in both of these frameworks. Further, it is fully backwards compatible with both FlexUnit and Fluint tests, so your existing tests from either of these sources can be run without change. In addition, the new framework provides a cadre of long requested features, including:
• Metadata based Test and Suite identification (no more need to extend testcase or testsuite)
• Hamcrest matchers courtesy of the hamcrest-as3 project.
      More Info:
      • Hamcrest AS3: http://github.com/drewbourne/hamcrest-as3/tree/master
      • Hamcrest: http://code.google.com/p/hamcrest/
      • Hamcrest Tutorial for Java: http://code.google.com/p/hamcrest/wiki/Tutorial
      • Hamcrest Tutorial for PHP: http://sebastian-bergmann.de/archives/735-Getting-Started-with-Hamcrest.html
•Theories, DataPoints and Assumptions
      More Info:
      • http://shareandenjoy.saff.net/tdd-specifications.pdf
• Ignorable tests
• Enhanced Sorting and Filtering
• Enhanced multiple asynchronous support for any portion of the test setup/teardown or execution
• UIComponent testing facade
And, perhaps coolest of all, a complete extensibility layer for others to write their own custom runners. This means that community projects such as Fluint, FUnit, FlexMonkey or ASUnit could plug into the framework directly to run mixed suites of tests from various frameworks.
There will be information posted in the next couple of days on where to find the bits for a public alpha.
I am excited to see where the community can take a framework built for extensibility and to watch this new platform evolve.
Cheers,
Labriola

Greetings, and welcome to the BlackBerry.com Community Support Forums.
Oh, there's no real authoritative PlayBook information here in the forum, we're a user to user support forum. RIM has not created a "Playbook" section yet in the forum since it's not released.
if you want to catch some of the latest rumors (and a few facts) on the playBook, check out this link and scroll through for several Playbook stories.
http://www.berryreview.com/
If you just want more games for husband's BlackBerry, check out AppWorld and mobihand.com, there's more than his BlackBerry can handle
Good luck!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Bug or Lost Feature in new Quicktime?

Not sure if the following is a bug but we have lost an important feature with the new updated release of QuickTime Pro.
I draw your attention to the three buttons at the top left hand side of a program window - RED Yellow GREEN.
With the latest QT update in place select any compatible movie or video to play. It opens in original size. Prior to this update you could expand it easily to fit your desktop by clicking on the green button. Now the green button is disabled and does not work upon original opening of a media file.
Go to the Menu and select "Fit to screen" or hit Control 3 and the video will expand to fit the screen. Hit the green button and it will return to its normal size. Hit the green button again and it will expand to fit the screen.
Prior to this update once you opened a media file with QuickTime Pro and clicked the green button it would automatically expand to fit the screen. That no longer happens. Apple has either disabled it or it is a missed bug.
All other OSX media players (RealTime, VLC, NicePlayer, etc) will immediately expand the video window to fit the screen when their green button is selected.
Apple please fix this right away. Without this feature many who use that green button (especially those of us with 30" Cinema monitors) will avoid QuickTime Pro and opt for one of the other more compatible/feature rich media players.
Tim...

Well, for now I'll drop QuickTime Pro and make other video players the default. If I have no alternative I'll convert the MP4 or MOV to another format like MPG or AVI and play it under VLC or RealPlayer.
I can't be the only user who is going to be doing this - dropping use of QTPro in favor of other more reliable and feature-rich Mac video players.
Tim...
3Ghz Mac Pro w/8GRam, 3TeraHD, 2 SupDrives; 13" BlackBook; 80G iPod, 8G iPhone Mac OS X (10.4.9) 30" Cinema, HPColorLJ Printer, LaCie 600Gig External & LaCie DVDRW/CDRW Drives

Missing features in new Pages

I was using a report template in the new Pages and I noticed at least 2 missing features that used to make things really easy.
There is no longer a way to select multiple objects:Say you create a diagram with several shapes, arrows & text boxes, if you have to move the diagram or delete it, you have to manually select every object. I looked in the help section for a short cut, but no such short cut is referenced. SOOO annoying and heaven forbid your palm grazes the touch pad!
There is no longer a way to insert pre-designed pages in a template.I created a report using a template, but when I go to insert a new section, I have to re-create (by c&p!) the sections! I used to be able to selct a page style for a new section (insert new head page, text page, photo page...etc.).
My hope is that I'm just missing something, otherwise the new Pages is much less "user-friendly" than it used to be and that doesn't feel like an "improvement".
Any shortcuts that more advanced users might know of?
Thanks!

I have the same problem. Unfortunately, I never had Pages 4.3, so I have nothing to revert back to. Pages was my last hope at exporting a doc to a pdf on a mac with working links - and of course, I buy it only to find out it no longer works in Pages 5. #headdesk
Any suggestions? (Google Docs is not an option, they redirect the links in the doc through their own URLs with tracking codes).

My appstore featured app (new and what's hot section) doesn't update.

I used iPhone4s IOS 5.1.1
and find that now my new featured apps doesn't update (now apps of the weeks is pinball arcade which is not now free of the weeks app)
I can't find solution of this annoying stuff in this discussion board too
I restored it once but the problems is still there.
Please help me

Thanks for the reply. I tried that again. It does not work. I tried something else before: if I go into the itunes store on my PC to access the appstore when it is updated and then sync with my iPad, the featured section will be updated to what is shown on my PC. However, this solution is only temporal. Once I exit iTunes (on my PC) and close the appstore (on the iPad) and restart the app, the featured section reverts to what I mentioned earlier.

Unwanted Feature in New Version

I am using Windows Vista on a PC. I have Flash Player version11.9.9. I am set up so that when a new version is available, I get a notification. Usually the notification mentions the new version, but provides very little other information, often just the need for “security” updates and the fact that a lot of popular sites use the Player.
The most recent update notification said all of that and also that the new version would notify my friends of my favorite games. I don’t want that feature. If I want my friends to know about my favorite games I will tell them and if I don’t want them to know, I won’t tell them.
I definitely don’t want Adobe deciding what my favorite games are and I definitely don’t want Adobe deciding who my friends are.
I can understand that Adobe could have the Flash Player capture information on what games I play, and capture my name somehow. And it could save that information and disseminate it. But how does Adobe know who my friends are?
Frankly, this is very, very disturbing.
Please tell me how Adobe decides who my friends are.
Please tell me how Adobe notifies these friends of my online activities.
Can this feature be turned off? If so, please provide explicit instructions.
If the feature cannot be turned off, then sadly, I will have to cease playing any online games that use the Flash Player.
-- Guerri

Hi,
I jut published a site and I am able to zoom in and out, the url of the site is given below, so you can test it on your phone.
Home
If this is not what you mean, could you please provide some more steps, so I can reproduce the issue.

Is new Numbers missing features as new Pages is?

I was greatly dismayed at the eviscerating update of Pages. Due to the missing features, new Pages is unusable to me. I haven't yet looked at the new version of Numbers. Is it eviscerated as well? Is it also missing features of the software it was meant to improve on?

Searching on lost numbers features gets is result...
https://discussions.apple.com/message/23480083#23480083
Jason

Where are all the new amps featured in new '09 guitar features?

Amps in the demo like VIntage Stack, Small Tweed Combo,English Combo and Blackface Combo are not listed as such in the amps section when using a guitar track. I checked out a lot of those in the list but couldn't match exactly the sounds in the new features demo which is excellent.

Danny Louviere wrote:
Amps in the demo like VIntage Stack, Small Tweed Combo,English Combo and Blackface Combo are not listed as such in the amps section
you're confusing the names of the amplifiers being modeled with the list of presets (various amp settings).
to see those amp names click the amp's image and then the edit button. the types of amps are in the popUp list underneath the amp

11 Nice Features with New Awesome & easy Magnetic Pen Tool (Updated)

1.      Scale effects during the scaling object, in the control bar there is more space (Empty) that will be the helpful to show you the example of the picture that I have made myself, when you transform any object, you will see these options in the control bar.
2.      Save preset of filters in filter gallery:- will be really powerful, it must be exchangeable so that we could send that preset to any one, it must be applicable on percentage(%) of document size, (depends on document resolution).
3.     Filter gallery must be the (live filter gallery), if this works on any raster object without converting to smart object, this will be helpful for creating live PSD.
4.     History panel:- history panel must save the history of document. It will be helpful and powerful, we could apply that history to any document like actions, and history should not be saved with document itself, it must be separate like actions, create 2 arrows in the bottom of panel like layer combs’ panel, to check the history, if any step is wrong we could be able to remove that step,
                              OR
5. Also create/convert history into action, see the pic as example,
If (to Adobe Photoshop Team) history saving is not a good idea! Then before closing the document you must convert history into actions, when any person saves document and has forgotten converting history into actions and wants to close the document, at that time that dialogue must be opened, (Do you want to convert your history into actions, when you open (that) document again you will miss history, and also must create a CHECK BOX for don’t show again.
6.     Layers Group:- In the group (folder) we move the objects with move tool and it moves all grouped objects that’s much better, but when we open the group (Folder), after opening it moves also all grouped object !!!, that’s not perfect, I suggest you how to do it, double click on grouped any object to open the group then move any object, and double click on any grouped object to close the group (folder). ( like Illustrator )
7.      Photoshop Extended can create powerful creative animation with audio and animation panel support completely the smart object and smart object makes animation really smart. But the problem is that it takes too much time to generate animation of few seconds and generated video file size is very large up to 1.GB.
        Here is solution, like new document dialogue box under the Device Central button it shows the document size, as hint, same way in the render video dialogue box it must show the file size and generating time and reducing file size hints.
        I had created (20 months ago) in Photoshop extend CS3 really awesome animation of earth, from where it starts it ends there, and shadows on earth are really awesome, map that moves to the shadow side, it changes from day to night and in the shadows you can see the roads’ and cities’ lights’ just like real night map photo it happens like naturally cause of smart object, I have two photos of the map day and night used for animation, you can see that creative animation on youtube.
(Link)= http://www.youtube.com/watch?v=sd86xGIkQxM
watch this animation in full screen Mode, b/c Youtube has reduced the Quality of Video.
8.   Welcome Screen:- Why welcome Screen is necessary?
                Adobe’s all products must be linked with Design sequence. (Interface)
Design Standard Suite which itself is a famous printing and publishing suite for design ( creation) layout, must keep same sequence of all products and should not affect the attraction,
                Example for Interface, now if CS6 all programs are created with new interface will you don’t change the Photoshop's interface???
Here are my Design Sequences Examples
These Pictures I have Designed in Illustrator
Photoshop with Welcome Screen Looking like Illustrator & Indesign now it matching with its Family.
Benifits of Welcome Screen for ( New ) user
A.    Many people don't know that Photoshop has free few samples with it these are nice example to understand that what photoshop can do!
B.    Photoshop Exchange : is really Necessary : for to exchange Workspace, color profile, Actions, Key Board Shortcuts, Layer Styles,    Swatches, Filter Gallery Presets & PSDs etc.
C.    This will be helpful for New Users TV.Adobe.com they will watch free teqchniques, as see this welcome screen.
D.     Any older user don't want to see the welcome screen that person can turn on that check box (Don't Show Again).
9. Pen Tool + Magnetic Pen Tool =
In my idea pen tool is the perfect tool for vector drawing it gives us perfect result as we want. but about those people like (Toys-R-Us (One Really Big Pen Tool Shortcoming) or other like him, if they can't understand, although pen tool is very easy to use, & he wants short key without going back for to breatck the handle, (for those people) if you want to create short key then short key should be "c or any easy" press to breat the handle, then press again to get back handle again during the using pen tool, or create a magnetic pen tool it must work like magnetic lasso tool works for selection, it will be the best & easy to use & to understand, during to use this tool if it goes to wrong way simply press back space key to go back to last step same like Magnetic Lasso.
(Awesome Magnetic Pen Tool)
or create pen tool like fireworks its pen tool shows next click's preview (very nice pen tool is in fireworks to understand ( really Awesome )
10. keyboard shortcuts like Illustrator for Blend Modes Next , Previous & Opacity 10 to 90, I had started to learn Illustrator CS3 & since CS3 I use these shortcuts for that, (~)tildi for next blend mode, Shift (~) tildi for previous mode, & opacity 10=1 key 20=2 to 90=9 key
11.PANEL ICONS Should be Attached under or above the tool Bar but not on Right or Left Side only ( like Indeign CS2 ).
Note :-
I shall appreciate your frank comments on the above suggestions.
Message was edited by: Muhammad Amjad Khan Abro
Message was edited by: Muhammad Amjad Khan Abro

OK Here goes my wannahaves...
1) create new table or sheet from a file instead of having to open the file and copy/paste into current document. ie "Insert Sheet from file", "Insert Table from File"
2) show linked data from a data source other than the address book - eg an ODBC data source or Filemaker database
3) Ability to paste a filtered table into a new table with just the found rows.
4) Ability to freeze rows and columns to allow for very wide or deep tables
5) When typing data into a cell, automatically adjust its width as you type. Depending on your enter key config, hitting enter puts a new line in the cell and adjusts the row height to fit.
6) Printer page formats default to regional standard: eg in Australia, UK - A4
7) Popup list or menu contents based on a data range: eg a list of categories
8) Media to be selected from anywhere on the system, not just in iTunes/iPhoto (eg most of my video is on an external hard drive)
9) "Autofilter" based on contents of the column.
10) Vlookup and other reference functions: need to be able to select a table (by name) as your range, a column/row (by name) to look up from and a column/row (by name) to retrieve. All functions should work this way, not just the basic ones.
11) When inserting a table you should be asked how many rows and columns.
12 "Format painter" - copy styles and other formatting from cell to cell and table to table.
13) Outlining based upon repeated cell values

No zoom in feature in new version of Muse

In the old version of Muse when you made your HTML files they would act like all other html files. Now they do not allow the viewer to zoom into and out of a page. This is kinda uber sucky, especially for the mobile version. People will want to zoom in. This is a really important feature and I am hoping you fix this!!!!!

Hi,
I jut published a site and I am able to zoom in and out, the url of the site is given below, so you can test it on your phone.
Home
If this is not what you mean, could you please provide some more steps, so I can reproduce the issue.

How can I try and get an app featured on New and Noteworthy?

I am launching a new app and would like it to be considered for the New and Noteworthy page. Any suggestions on how I can approach this?

Hi,
SAVE an image of any non-SAP System or SAP System (SAP BPMce) on SAP ABAP Transaction
and GET an image and set on output of my ABAP Proxy, so that my ABAP Proxy, send the image to non - SAP system or SAP Java System (SAP BPMce)
You can transfer the image file as a binary stream between the two systems(could be SAP/Non SAP), so one of the parameters on the MI would be an XString, along with others that will help you classify the data at transaction level.
Also, go through the below link where i have tried to answer a similar question.
Decryption of binary data in SAP
Elaborate, if you need more specific answers about your requirement.
Regards,
Chen

About the new relase of XSU

Hi,
My question is when and where can i find the new release of XSU that should fix the bug with the Connection to the MySQL server
Thank in advance.
Marcos

Soon. Not on OTN yet, but any day now.

Features in new relase of vm 2.2

Similar Messages

Maybe you are looking for