Features of SAP XI -NW 2004s XI 7.0 SP11

Hi Friends,
Indeed your responses were helpful.
I'm back with a new question regarding SAP XI 7.0 version.
1. How is it different from XI 3.0
2. What are new features, enhancements and advantages of XI 7.0
We aretrying to upgrade our XI installation from 3.0 to 7.0.
How to go ahead this.
Please provide me some good blogs, pdfs or ppts or ebook, which can help achieve the same.
My personal id is [email protected]
Thanks in Advance.
Younus Mohd.

Hi,
The releases notes should help,
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/content.htm
One feature ( have not explored it ) which i read on the forums was somehting called Faulty File handling where tje validatio of the source files is done and if it does not match then the file is sent to a faulty file folder.
Have not heard much / explored this though.
Regards
Bhavesh

Similar Messages

Issue in the Reporting feature of SAP BPC NW 7.0

Hi everyone,
I am facing an issue with respect to the Reporting feature in SAP BPC NW 7.0 version. I am supposed to generate a P&L report using the EVDRE function.
Issue-
In the report that I have generated, the system is retrieving only a subset of the broad-level P&L heads. e.g. while BPC is retrieving the EBITDA, EBIT and PAT figures, it is not retrieving the Depreciation, Interest and Tax figures in the report. All the members that are not getting displayed are members with ACCTYPE= 'EXP', while the ones getting displayed are members with ACCTYPE= 'INC'.
Even though the 'EXP' figures are not getting displayed, the amounts are getting deducted correctly. (i.e. even though Interest amount is not getting displayed in the report, the PBT figure being displayed is correctly calculated as PBT= EBIT-Interest).
Also, I am able to see the amount in Interest payments, if I drill to the base-member elements (G/Ls in my case)
Would really appreciate if someone could shed some light on what might be the probable issue.
Thanks in advance,
Sameer Rane

Hi Nilanjan/All,
Thanks a lot for your reply. I suppose, I was not very clear about my problem. The issue is with regards to the value for the Account-dimension members with ACCTYPE = 'EXP' and not with the members per se.
Setting the MemberSet Filter addresses the issue of getting particular Dimension members in the report. In my case, I am already seeing all the necessary members in my report (I have explicitly created a list of all the members I want to see in my report in the MemberSet parameter). However, I am not able to see any values for these members for any of the time periods (even though the values exist).
Also, I don't get any values for some of the INC items as well (e.g. OperationsIncome) inspite of the fact that the base member G/Ls under this account hold values.
Would appreciate any help towards resolving this issue.
Thanks in advance,
Sameer

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

New features in SAP Solution Manager 4.0

Hello Experts,
Can anybody give me a good list of new additional features in SAP Solution Manager 4.0 with description and wt r the business benefits of implementing those features.Plz dont give marketplace pdf links as i hv checked it.any good Word which is self prepared wll be helpful. Useful answers shall be rewarded points. Requested to revert at earliest as i hv to present tat to my seniors here and is urgent. My Email Id is [email protected] .
Regards,
Saumya

Hi,
Solution manager is a SAP component.It's a free software provided by SAP.After 640 release on wards if you want to install any software solman key is mandatery field.
Using solution manager we need to do the fallowing things.
1.solution manager CEN and Alerting configuration guide for dummies.
2.system monitoring configration guide for dummies.
3.service desk configuration guide for dummies.
4.ccms monitoring configuration guide for dummies.
From april onwards we need to down load the support packs through solution manager.In order to do this one we need to configure maintanace optimizer.
i hope it will help you.
kiran kumar.v

Compatibility of Informatica with SAP Netweaver BI 2004s

Hi,
Currently we are using Informatica Power Center Version 6 with SAP BW Version 3.1. So far there has been no problems in terms of connectivity or extraction. We are now looking to upgrade to SAP Netweaver BI 2004s. Would anyone be able to tell whether our existing Informatica would be compatible with the Netweaver version ? I am told that the latest Informatica is now version 7. Do we need to also upgrade that Informatica to version 7 in order for it to be compatible with SAP Netweaver BI 2004s?
Any inputs regarding this are highly appreciated. Thanks in advance.

Hi,
Check this,.. this has very little info ..
http://www.taborcommunications.com/dsstar/04/1130/109597.html
Thanks,
Raj

SAP Netweaver 7 (2004) installation guide

Hi,
I am trying to install SAP Netweaver 7 (2004) in my desktop. But I am
having problems with it. I do not know how to create a DDIC user and its password. At the last phase of installation it is trying to perform a test logon with DDIC user but failing. I am sure with my system hardware requirements. Can anybody give me a solution, or give me a installation guide which can help me to make it through ?
Please help...............

Hi,
DDIC is a default user.No need to create it.Its password is the master password that you should have given during the time of installation or you can give the password 19920706 which is defined by SAP.
DDIC is mainly for working Transport Mnagement System(TMS).

Is anyone aware of the features of SAP LUMIRA 1.18?

I need a help in understanding the upcoming features of SAP LUMIRA 1.18.

Hi Neeti,
you will come to know about the features once SAP is close to the release date. But all you can judge by looking at the road map given by SAP.

New release SDK2004 SAP Bussiness One 2004, Csharp support

Hello,
We currently working with the SDK 2004 and wondering when we can expect a new release of the SAP Business ONE 2004 SDK?
We are programming in csharp(c#) and we noticed that there is not a fully support for this programming language.
Will this support be better in the next release of the SDK?
Thanks!

Rene,
There is not a "new release" of the Business One SDK 2004A that is specific to C# or any other programming language. The SDK is geared to work with any programming language that can interact with COM objects such as VB, VB.Net, C, C++, C#, Java,etc. We do have the 2005A SDK that is currently in ramp-up and will be new, but again this is not specific to any programming language which is a benefit of the Business One SDK. We have many developers that are using the Business One SDK around the globe that program in C# and are using the 2004A SDK. In the Business One 2005A SDK there will be Visual Studio Wizards that will help with the creation of VB.Net and Visual C# UI modifications. Is the issue that we do not have C# code examples or is there another issue? If you have a question with respect to the SDK and C#, this is the forum to post a question and have a community of Business One developers help.
Eddy

DI-API Error Company Connect with SAP BUSINESS ONE 2004 - B 7.30.215

Hi,
I am using SAP BUSINESS ONE 2004 - B 7.30.215. But in the COM window of the Visual Studio.net is having only
SAPbobsCOM 6.2 and 6.5.
While executing the DI connecting program It is showing an error
the error is -2028 (without description)
I need to add any patches to connect to company?
help me..
Regards,
Jay

Hi Jay,
Here's a post that also refers to the same question you asked.
Need Help in DIAPI
Is your problem with the connection? Have you tried to connect using the Data Transfer Workbench? Where do you get this error -2028? Please post your code so we can see what the problem is.
Adele

"Step for step" configuration of SAP NetWeaver portal (2004s)

Hello,
is somewhere a plan or the proceeding - like "step for step" configuration of SAP NetWeaver portal (2004s)? I adapted now the Design of the portal. What is to be made at next - role concept, integration of transactions, or something else?
Thank you for their assistance.
Regards,
Galyna

Hi,
Refer the following links for some good documents
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1236a490-0201-0010-31a2-a08f5706d54f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/410ea290-0201-0010-748d-9738e5792a9b
http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0407c890-0201-0010-4684-e22d7c3da113
https://www.sdn.sap.com/irj/sdn/wiki
Regards,
Tamil K

Documents for Upgrading Bi 3.5 to SAP BI Netweaver 2004s(BI 7.0)

Hi Gurus,
Right now, we are planning to Upgrade BI 3.5 which is in DB2 to Oracle - SAP Bi Netweaver 2004s (Bi 7.0). It will be helpful if u can provide some documents. Step by Step guide approach. Whether it is nice to start BI 7.0 and use Updgrade Assistant for further process.or can we have start from BI 3.5 client copy do the Patches to move to Bi 7.0 which is the best approach. Give me the detailed process to go about.
Whether it is possible to transport the Bi Objects which are in Bi 3.5 to Bi 7.0. If it possibe means how to accomplish.
Guide me with some documents.
Regards
Mano

hi,
Please follow this link..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
hope it helps,
regards,
Parth.

Error in processing SAP Net Weaver 2004's Support Release 2

Hi,
While installing PI 7.0, it wil asks for solution manager key, after entering the key starts proceessing the phases, While processing I got an error which is given below.
An error occurred while processing service SAP NetWeaver 2004s Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation. You may now
press Retry to repeat the current step.
press the View Log button to get more information about the error.
stop the task and continue with it later.
Log files are written to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS.
retry viewlog stop
Wat i hav to do now to solve this error. suggest me.

I recommend to use j2sdk-1_4_2_15-windows-i586-p with 32bit and j2sdk-1_4_2_16-windows-amd64 (special edition for Netweaver) for 64bit systems. Refer to the notes on these issues:
Note 716604 - Access to Sun J2SE and recommended J2SE options
Note 801868 - Java(TM) Web Start in XI 3.0 FAQ-Troubleshooting
Note 941595 - Download J2SE 1.4.2 for the x64 platform.pdf
Note 943498 - J2EE Engine does not start 6.40 and 7.0.pdf
Note 943602 - Analysis of errors within the startup of J2EE Engine 7.0.pdf
Also, your regional settings should all be set to English and United States, and English also for non-Unicode programs as other settings (excluding location) may lead to nullpointerexceptions in Java.
Regards,
Gökhan

Web Enabled Features in SAP four point seven

Dear All..
Iam using SAP four point seven in this version web enabled features available or not.
If option available how to enable this please give me the documentation..
And what are the uses in MM Side.
Is it possible to connect vendor..?..
Regards
P.Anandhakumar.

Hi Kevin,
Would you be able to tell me how you generate the web service client? And when you manage to generate the client, does it automatically generate <generated_name>_Stub.xml?
Thanks,
Alfonso Agustinus

Credit Card Number Encryption Feature in SAP

Hi,
I am interfacing between legacy system and SAP(probably through BAPI). The Credit card master table is VCNUM.
The requirement is to have the Credit card number in the encrypted form. Does SAP has any feature that supports encryption feature?
Please do reply with valuable suggestions.
Thanks & Regards,
Rajesh

Hi,
You can refer to below <b>threads</b>:
Encryption / Decryption of Credit Card Number
Re: Password encryption in SAP
Re: Information regarding encryption.
Hope you find your solution here.
Reward points for useful answers
Rgds,

Turn off feature in SAP

Hello,
May I know how can I turn off a feature, such as ABKRS in PE03 in SAP? Thanks!
Regards,
Anyi

Cheap trick on this one, change any part of decision tree, save it, now change back to what you had, save again, now the tree is marked as inactive and so is the entire feature. =:)

Features of SAP XI -NW 2004s XI 7.0 SP11

Similar Messages

Maybe you are looking for