Feban error

Dear All,
In my client place i done the configuration  Electronic Bank statement
Make Global Settings for Electronic Bank Statement i done all  the setting in this path after for one bank
i run ff_5 , FEBP and FF_6 i can see the posted statement. After that i try to run the FEBAN in that i  can view the posted line item for posting and transfer to main gl  my +  and - items are shows in red indicator. i select and try to post it but it is not going to further steps.
pl guide me to

Hi,
Please check again your config. I have described all the steps in below thread.
Re: Electronic Bank Statement Procedure
Normally if your config is correct then in FEBA when you try to post the red items it would open the FB01 entry screen and would allow you to post it in foreground with required details. Since you are not even able to go to FB01 screen so my guess is there is some config missing.
Regards,
Sanjay

Similar Messages

  • Error in Electronic bank statement

    Hi Guys,
    am trying to do Electronic bank statement, statement is generating but automatic clearing with GL (Main Bank and Bank clearing account) is not happening.
    T.code: FEBAN
    error shown under this transaction... i did not get any error log...how do i rectify this error...
    but under this t.code, i can able to post the line item by manual entry but its not happening automatically
    could anybody tell me how to rectify this error
    Thanks in advance
    Regards
    Elan

    HI Elan,
    If the documents are not posted through Bank Statement processing then the same document items is shown in the text of  "Elec. Posting Incomplete" . After you double clicking the same then you get the list of documents which shown the status of Entered instead of Posted. that means the documents are not posted into the system.
    For posting those incomplete documents you may reprocess the bank statement through the t.code FEBAN.
    You have to enter the details of the Co.code, House Bank, Acct ID, Stmt No and stmt date etc and then press execute button to get the entered statement to do the reprocess.
    Select one of the red colour openitem , goto the select items in the menubar and then click on post.. If you have multiple items which are in red colour then also you have to post all the line items by selecting each and every item. There is no option option to post all at the same time.
    Hope it will rectifies your problem..
    Thanks

  • FEBAN - FB05 - error F5243 for vendor payment

    Hello,
    I kindly ask for a hint.
    The vendor payment is included in eleclonical bank file.
    From transaction FEBAN (Edit bank statement) for item which is not fully cleared we get to trans. FB05 (post with clearing) and try to post to account type K (vendor) - changed manually from D (customer) which is defaulted to K and vendor account number entered. The document type is not visible on selection screen when FB05 is accessed through FEBAN.
    The document type for vendor payment should be KZ.
    Somehow the transaction intend to hold DZ (customer payment) --> and when we hit enter an error message appears:
    Account type K is not defined for document type DZ
    Message no. F5243
    Not sure what is driving this ...
    Please, advise ...
    Thanks a lot
    Marcela

    Hello,
    Please check your configuration:
    IMG => Financial Accounting => Bank Accounting => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
    Give your chart of accounts
    Double click on posting rules.
    Check the document type given for the posting rule you are using to post.
    You need to change from DZ to KZ.
    Regards,
    Ravi

  • E-mail generation for errors in FEBA or FEBAN

    Hello,
    Is it possible to send an e-mail when the bank statement is posted in SAP through FF.5 and the statement resulted in errors that would eventually needs to be corrected in FEBA or FEBAN ?
    Thanks,
    Raja.

    Thanks,
    I will check.
    Regards,
    Raja.

  • F110 - Payment order number not deleted after Feban posting

    Hello,
    I have problem regarding Payment order deletion. End user creates Bank statement (FF67) using Payment order(F110) number. Then with Feban end user posts document. Normally after Feban posting payment order number disappearing (we can see this number in tables such pyordh, reguh et c.). If we want to see Payment order number (using t-code F110) system gives such error - "No payment orders exist for this selection
    Message no. FZ084
    Diagnosis
    No payment orders exist for the selections made. This may be because the relevant account statement has already been imported".
    But in this case it is not disappeared and end user can use Payment order number second time in t-code FF67 and post in in Feban.
    Thanks and Regards,
    Sabuhi Gaflanov

    HI Carlos,
    Since you archived PO, it is stored in archive physical drive not in SAP drive.
    when u use me23n, the archived PO is picking from physical drive and it says "Already archived" message.
    I'm sure there will be no table level entries for the archived documents
    Go to SARA transaction - information system--> Archive Explorer - MM_EKKO and execute.
    Check your PO is listed here.
    So if you dont want to see your PO, then you need to De-activate information system
    in SARA-Information System-->Customizing -
    search infrastructure by Object name and use activate/deactivate icon -
    A question i really need to know - Why you want to delete a particular PO, Archival process is not a small thing and usually it takes place as a MASS activity.
    reg,
    bhg

  • EBS - Error F5 263 (Diff is too large for clearing)

    Helli Experts,
    We are implementing SAP Electronic bank statement functionality.  One of the requirements of the business is that of automatic clearing of customer open items after import of MT940.
    We are using standard interpretation algorithm 001, but made use of an enhancement to clear the open items based on age of the open items rather than any reference given in Note to Payee details.  That means if a customer has 4 overdue open items and paid the amount referring to the 3rd open item, system should rather clear the 1st open item which is overdue for more number of days than the 3rd open item.  This has been made possible by activating the check box "Distribute by age" in FEBCL table through the standard enhancement option given by SAP.
    As an extension of this requirement, if the customer pays off in lumpsum (in single payment) for the combination of first three open items, then the system should clear off those three open items leaving the fourth one as the open item.  For instance first open item has the amount of $ 1000, 2nd one has $2000, 3rd one has $3000 and 4th one has $4000.  Now if the customer pays $6000, system should clear the 1st, 2nd and 3rd open items automatically after loading the bank statement containing this payment of $6000.  So, only the 4th one will be in open item status.
    But when I load the bank statement, system is giving me an error message F5 263 (the difference is too large for clearing) in posting area 2.  Posting area 1 is fine and document is successfully posted.  Issue is there only in posting area 2.  I believe system should be able to find the first three open items for the amount of $6000 based on the indicator of "Distribute by age".  But this is not happening.  If I try to reprocess the statement through FEBAN after I got this error message, then system is able to find the first three open items and then able to clear off.  But wondering why it is not happening in transaction FF.5 automatically.
    So, could you kindly let me know if I am missing something or is it a limiation in SAP that this scenario is not possible to achieve through EBS.
    Thanks in advance.
    Sridhar

    Hi Experts,
    Using standard BAdI the requirements could be solved.  Thanks.
    Regards,
    Sridhar

  • Error: (F5 263) The difference is too large for clearing in  EBS

    Hi
    i was running  FF_5 , i got the the below error.
    Error: (F5 263) The difference is too large for clearing
    The next detail screen i found that the Bank account posting gone correct but issues in subledger posting (there 27 errors in the table).
    Can i have your inputs on this please.
    Thanks for your help in advance.
    regards
    Raghu

    Hello Shanid
    You are absolutely correct. There were two line items in my outgoing bank (2 line items of Rs. 4000 each).
    In my bank statement (electronic bank statement), there was only 1 line item of Rs.4000). So system gave this error (I checked in FEBAN).
    My expectation was, system will read assignment field for the check number and it will consider only one line item of Rs.4000 where check number in bank statement is matching with assignment field.
    Please let me know, how to achieve this.
    Please note that, this is working fine in manual BRS.
    Meena

  • Showing User ID in Error Message

    Fellow Developers,
    I am trying to Include the User ID in an error message. I want the message to say "Payment Advice in use by XXXXXXX".  In SE91 if I enter a "&" it spits out the company code and says "Payment Advice in use by Z200" (The company code we are using). Is there a variable for user id or will this need a coding to change to work this way?
    This error occurs in transaction FEBAN when you click on the payment advice field and another user is already editing or looking at it.
    Any Help would be greatly appreciated.
    Justin

    Hello,
    please check in SM59 the LOGON-User for this RFC-Destination.
    Maybee the user where it works is maintained, the other not.
    Or if there is a general RFC-User maintained the user where it does not work has maybee not the authorization in the target.
    Best regards
    Manfred

  • FEBAN issue

    Hello Gurus,
    After uploading the bank statement in transaction FF_5 the items got automatically cleared on the account, and in FEBAN those positions are still showing in "red". Transaction 225 showing error for posting area 02 not updated.
    any help highly appreciated.
    Thanks.

    Hi Jyothi
    I believe you are looking at a outgoing scenario where the vendor line item was cleared during the F110 transaction and now the open item is in the outgoing clearing account.
    Thus, in your case the posting rule assignment to the provided transaction code 225 / - is not correct.
    You should assign a posting rule to this transaction code which has only the definition of posting are 1 and not posting area 2 because in this case no sub ledger posting is required.
    Since, you have assign a posting rule with posting area 2 definition, SAP tries to post document in sub ledger area which is not required.
    Solution:
    1. Assign a posting rule with only posting area 1 definition to the transaction code 225 / -.
    2. If changes cannot be done then you can ask the user that no further action is required in this case and ignore the red symbol in FEBAN. But, this has to be dealt case by case.
    Hope this clarifies your doubt.
    Regards
    Nikhil Kothari

  • FEBAN - Post Processing

    Hi,
    After executing BRS (Manual BRS) - FF67, i get all the error items in FEBAN.
    Now the issue is that i have posted a single line item in my books and Bank has split the same payment in two line items. So in FEBAN I have two line items which i want to clear with a single line item in my books.
    How can i do this?
    Thanks,
    Regards,
    SAPFICO

    Here's what you can do.....  Process one of the items from the bank statement in FEBAN.  Because the amount won't match a line item, SAP will display the clearing transaction (FB05).  Manually select the single item that you posted and create a new line item to the same account for the difference (between the bank statement item your processing and the single item you posted).  The new item should balance the document, so you can post. 
    After you've posted the first bank statement item, process the second one.  There should now be an item in the account for the correct amount, so it should clear automatically.

  • Unclear FEBAN due to duplicate transaction

    Hi,
    I would like to highlight issue on unclear FEBAN. This happen when we upload bank statement without knowing every transaction duplicate in the file. Thus, appreciate your assistance to clear the item which is still open in the same file.
    Regards,
    Za

    Hello Alex
    I don't really understand,when you say that there were duplicate entries then the open item would have been cleared already. So what you would be seeing as an error in FEBAN would be the duplicate entry for which the customer clearing would not be possible as it has already been cleared.
    So please explain further as to what is it that you want exactly.
    Rgds

  • Question on FEBAN

    Hi,
    Is there a way to route the red status / un processed items of FEBAN to some intermediary account and clear that account on time to time basis. Bank will be sending the correct items in the subsequent day.
    Thanks in advance
    uma

    On the second day, we get 2 transactions - a deposit to correct the withdrawal for the incorrect check from the day prior and a new withdrawal with the corrected check number.  The transaction for the corrected check does not require any manual intervention and the encashment date is updated automatically.  
    Here's how we process situations like this:
    1st day - withdrawal with incorrect check number - the transaction goes to a red status in FEBA (we use FEBA, not FEBAN) and the user changes the internal transaction in to post a debit to our "error" account and credit cash
    2nd day - 2 transactions - 1) deposit for the incorrect withdrawal the day prior and 2) a new withdrawal with the correct check number
    Deposit - goes to a red status - user updates the internal transaction to the posting rule that credits the error account and a debits cash.  Now the error account is at zero.
    Check with correct number - goes to a green status - because of the correct check information, the EBS program is able to post the transaction automatically during the load and mark the check as cashed.

  • FEBAN - Processing

    Hi All,
    I hve uploaded the bank statemnet through FF_5, but due to some customisation error the postings did not happen and when i see in transaction FEBAN all the line items show with red mark. Now i have corrected the customization.
    Now how can i reprocess the items in FEBAN.
    Can i post directly in FEBAN manually all the line items.
    Or is there other way to posy the total file at a time - means can i delete the line items in FEBAN and reupload the file once again.
    Please let us know the options.
    Thanks in advance for your help.
    Regards
    Narasimha

    Hi Henri,
    Thanks for your reply.
    Narasimha

  • Error in starting Adobe Bridge in Photoshop CS2

    I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
    I have reinstalled and click repair but to no avail
    I followed Adobe Support Knowledgebase solution and run CMD and this appears:
    c:Documents and Settings/Jesus M Ferraris>
    then i entered the command
    cacls c:\windows\installer /T /E /C /G administrators:F
    but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
    I also entered the next command
    cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
    still the same error as above appears, Please help, have I miss something or was my procedure correct...
    P4, 512ram, WXP 80gHD

    Very useful.
    Good Luck.
    My
    Si
    tes

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Maybe you are looking for