February is 29 days and offset -365 days offset is wrong

Hello
I have many key figures calculating offset periods of -365 days on 0calday interval
Today I have a problem because february is 29 days and all values with the offsets on 01.Feb.2008 until 29.02.2008 are reading/summing up the values for 01.Feb.2007 until 01.March.2007.
Is there a way to solve this without having to change the offsets in all key figures in all queries to -366?
Thanks in advance
Heloísa
Edited by: Heloísa Alves on Mar 5, 2008 10:48 AM

Dear,
Try to create a variable with User Exit----
> in that give the logic as Prevoius year to date...consult with ur ABAPer to write the logic and use that variable in ur queries then only the problem will get resolved ...
If u find the standard variable then install it and use it ...................
Regards
venu

Similar Messages

Here comes "MSI Heat" for February –Valentine's Day lucky draw!

Hi MSI Workstation Fans,
Here comes “MSI Heat” for February –Valentine’s Day lucky draw!
Reply this post by a photo of a flower you think represents “LOVE” the most and tell us why. You will have a chance to win a secret gift! We’ll announce lucky winner on Valentine’s Day!

Congrats to John Hulbert for winning this lucky draw!

Spinning rainbow wheel for long periods on File Open commands in Acrobat and Office 365 programs

Hardware & Software:
MacBook Pro (17-inch, Mid 2009)
77GB of free hard disk space
8GB RAM
Running OS X Yosemite (Version 10.10.2)
Over the last few days, when I try to execute a File Open command from Adobe Acrobat or Office 365 programs (even from an innocuous location such as Documents), I get the spinning rainbow wheel for long periods of time (10 seconds to minutes) before I am able to select a file to open. I copied messages from Console after a File Open command for each of Adobe Acrobat and Excel (the selected location was Documents), given below:
Excel Log Messages
2/24/15 5:50:50.970 PM     WindowServer[147] disable_update_timeout: UI updates were forcibly disabled by application "Microsoft Excel" for over 1.00 seconds. Server has re-enabled them.
2/24/15 5:51:01.280 PM     NetAuthSysAgent[684]        AFP error -1 mapped to EIO
2/24/15 5:51:01.281 PM     NetAuthSysAgent[684]        ERROR: AFP_GetServerInfo - connect failed 5
2/24/15 5:51:01.281 PM     NetAuthSysAgent[684]        AFP error -1 mapped to EIO
2/24/15 5:51:01.739 PM     WindowServer[147] common_reenable_update: UI updates were finally reenabled by application "Microsoft Excel" after 11.77 seconds (server forcibly re-enabled them after 1.00 seconds)
Adobe Acrobat Log Messages
2/24/15 5:58:22.145 PM     bird[257]        Assertion failed: ![_xpcClients containsObject:client]
2/24/15 5:58:23.454 PM     WindowServer[147] disable_update_timeout: UI updates were forcibly disabled by application "Acrobat" for over 1.00 seconds. Server has re-enabled them.
2/24/15 5:58:29.538 PM     NetAuthSysAgent[708]        AFP error -1 mapped to EIO
2/24/15 5:58:29.538 PM     NetAuthSysAgent[708]        ERROR: AFP_GetServerInfo - connect failed 5
2/24/15 5:58:29.538 PM     NetAuthSysAgent[708]        AFP error -1 mapped to EIO
2/24/15 5:58:29.722 PM     WindowServer[147] common_reenable_update: UI updates were finally reenabled by application "Acrobat" after 7.27 seconds (server forcibly re-enabled them after 1.00 seconds)
Can anyone give me an idea of what these messages mean and how I can solve this problem?
If I'm not in the correct Community for this question, could someone kindly tell me where I should re-post?
Thanks.
David Walker

Yes; I have previously connected to an iMac at this location using File Sharing. However, in my attempts to solve this problem last week, I had already unchecked File Sharing in System Preferences. Tonight, I also deleted the folder from the window in the File Sharing System Preferences page, then rebooted. The problem still persists.
I try not open files across a server line, i.e., I try always to copy a file to the local computer and open it there. I may have gotten careless and tried to open a file from the Windows server with either or both Acrobat and Office 365. Although this was an SMB share, is it possible that these programs are now trying to connect to the Windows server on a File Open?
I had about decided to quit chasing this problem; we spend about two weeks every two months at this Boston location, and I'll be returning to my Florida home this weekend. So I decided I would see what the situation was when I returned to my native habitat, although I may be chasing this problem again in our trip to the Boston area in April.
The other thing I wondered (I guess I can't quite let it go), is whether there is a command line in Terminal that would kill all AFP shares.
In any case, thanks for your help; you're very knowledgeable.

Email Alias and office 365

Good Day
i have been looking around but i haven't found a clear answer. My question is this i have exchange set up in domain A and office 365 in domain B.
Both are in separate forests. Can i set up an alias in office 365 for my exchange account in domain A, so that i can receive emails from that account in domain B?
Thanking in advance

Hello dnlsingh,
After creating External contact as per below. Please visit below link and confirm whether this answers your question.
http://community.office365.com/en-us/f/148/t/239836.aspx
Sachin Shetty| MCP|MCT|MCTS|MCITP| http://sachinshetty.design.officelive.com Please remember to mark the replies as answers and Vote as helpful if they help and unmark them if they provide no help.Thank you in advance.

SP 2010 and Office 365 C2R owssupp.dll or interceptor.dll issues

Hello,
At my company we're having compatibility issues after upgrading our
Windows 7 SP1 64-bit NL-NL laptops
to Internet Explorer 11 and Office 365 ProPlus Click-to-Run
32-bit NL-NL.
Our
initial notebook configuration had Internet Explorer 9,
Office 2007 ProPlus and Lync Basic 2013 installed.
The upgrade path exists of deleting Office 2007 and Lync Basic 2013, installing the Office 365
Click-to-Run and letting Internet Explorer update via the Windows Updates
The issues we experience happen between our
SharePoint 2010 On Premise and the SharePoint Online environment.
While we had no issues before, now, when trying to edit a document on SharePoint 2010 On Premise
we get the message: "A Microsoft SharePoint Foundation compatible application could not be found to
edit the document"
Doing some digging around online a lot of topics point to the ‘owssupp.dll’ as a possible culprit
but to no avail we tried a number of suggested solutions, listed below. Some of these solutions might propably work for the Office 2013
MSI installation but none of them seem to apply to the Click-to-Run version.
- Repair Office (Fast and Online)
- Delete and reinstall Office
- Switch in IE between 32 and 64 bit mode but this is
not possible with Internet Explorer 11
- Tried the Microsoft Hotfix KB
2726997 but got the message that it
does not apply to our system.
- Check registry references if owssupp.dll points to Office 15
- Manually re-register owssupp.dll
- Replaced owssupp.dll by the Office 2007 version
- Checked if all SharePoint add-ons in Internet Explorer were enabled
-> 'Sharepoint OpenDocuments Class' refers to interceptor.dll
not owssupp.dll
- Check/Install “Microsoft Sharepoint Foundation Support”..
Click-to-Run doesn’t
have that option
- Create registry keys in:  HKEY_CLASSES_ROOT\Installer\Components\55EAFA0B8A4403B428FDE038B252C621
What there should be: HKCR\Installer\Components\55EAFA0B8A4403B428FDE038B252C621\x86\1033
What should be added: HKCR\Installer\Components\55EAFA0B8A4403B428FDE038B252C621\x86\1043
But the 55EAFA0B8A4403B428FDE038B252C621-key
doesn't exist with the Click-to-Run version and manually creating it doesn’t help
- Put the site in the 'Intranet Zone'
- Put the site in the 'Trusted Sites' list (prodsharepoint.kindengezin.be)
         -> HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\CurrentVersion\Internet
Settings\ZoneMapKey                    -> *.kindengezin.be
(REG_SZ, Data: 1)
- Check if our SharePoint 2010 On Premis environment is completely up-to-date
- Create
C:\Program Files (x86)\Microsoft Office\Office 15\ and placed the owsupp.dll in it; in case SharePoint would be looking for it in the wrong place;        -> Keep in mind that the folder structure with Office
365 ProPlus Click-to-Run is different than the 'normal' Office 2013 as the owssupp.dll is now located in C:\Program Files\Microsoft Office 15\root\office15\owssupp.dll
- Checked if our Firewall settings are up to date (IP-ranges and other settings)
The test where I got it to
work, but is not a solution in my personal opinion is: Open the Lync Basic 2013 setup and only check
Support for Microsoft SharePoint Foundation
In your Programs and Features list you now have 2 entries: Microsoft Lync Basic 2013 Microsoft Office
365 ProPlus – nl-nl
I do not trust this “solution” as I do not know the future consequences of this “solution” in terms
of updates or functionality.

Anyone? Have OWSSUPP.DLL issues with Office15 and IE11 as well - can't get the "Connect to Outlook" menu option on SharePoint calendars to show.

GL transaction and Offset Account

Hi,
I have set the opening balance amount and offset in suspense account. After that, I found that there are not balance in between the GL Account.
Which mean I try to enter the opening balance amount into that G/L account which already have transaction and this G/L account is controlling account, how do i resolved it?
Thank

Dear Lee,
Are you refering to the opening balances of business partner control account?
When you create the opening balance for business partner, the gl transactions created are to the control account and the gl offset account.
So when creating the opening balance for the gl accounts, then the business partner a/c should goes back to the gl offset account. Then the gl offset account is zero. The GL balances in B1 will balance to your legacy account.
Hope this help.
Regards,
TWP

Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5

Apple send out this message:
"Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5 and iOS 7 SDK. Learn more about building apps for iOS 7."
A few questions about this to Adobe:
- Which AIR SDK version is prepared for this ?
- Do we need to recompile all ANE's ?
Cheers.

Hi All,
The issue has been fixed and the build 4.0.0.1619 is available at
http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_mac.tbz2 for mac and http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_win.zip for window. Please let us know if you will face any issues.
Regards,
Nimit

Does Weblogic server 8.1 support "LIMIT and OFFSET" in EJB QL?

hi,
Can any one tell me does 8.1 server support "limit" and "offset" keywords in EJB-QL?
I tried to define a finder method in the workshop with the following syntax:
@ejbgen:finder ejb-ql="SELECT OBJECT(o) from EmpBean OFFSET ?1 LIMIT ?2" generate-on="Local" signature="Collection findEmp(java.lang.Integer st,java.lang.Integer en)"
I get the following error
ERROR: ERROR: Error from ejbc: [EJB:011017]Error while reading 'META-INF/weblogic-cmp-rdbms-jar.xml'. The error was:
ERROR: Query:
 EJB Name: EmpBean
 Method Name: findEmp
 Parameter Types: (java.lang.Integer, java.lang.Integer)
SELECT OBJECT(o) from EmpBean OFFSET =>> 1 <<= LIMIT 2
EJB QL Parser Error.
39: unexpected token: 1
What am I doing wrong?
thanks

I could not find any documentation that suggested LIMIT or OFFSET where supported. Some of our developers needed to use limit, in the end all I could suggest was using a dynamic query and setting the maximum number of results see here
.

Hussein Badakhchani

Hibernate - limit and offset in select query

Hi All
is there any way to use limit and offset features of mysql in hibernate queries?
For exmple I have 100 rows in my results. I want to display the results page by page. How can I select rows starting from a particular index (for example from 10 to 20 instead of starting at the first record). The 'setMaxRows()' function can limit the number of results, but how can I specify the offset ? Thanks in advance.
regards
boolee

You could specify the offset with
query.setFirstResult(offsett);
The drawback is (at least with DB2) that the whole query will be executed anyway, however you save space on the Java side.

Regarding offset start and offset length

Hi,
Hello Reporting experts, I have a query on offset start and offset length which i have come across while creating
formula variable type replacement path and with text variable type replacement path.
Can you please tell the neccessary of the usage of offset start and offset length with anyone scenario.
Thanks in advance.

Hi Srini,
I had shared this with one of them in the Forum,the same and sharing with you as copy paste of thjs Link was not working ...
I will share one of the Scenerios where i have used them ...
This is by using Replacement path by using variables by text Variables....
For Offset Start and offset length
The user input month.Year in the input ,say 02.2010 and he wanted the month to be displayed in the Heding of the KF and not the YEAR.We created Text variables and assigned it to the Month-year Variable and Did Offset to pick only the Month and not the Year by choosing the Month Alone.
for Interval-From-to
In another Scenario we used the we input say,02.2010-05.2010 and we wanted the month to the captured seperately i.e 02 and 05 in the Heading of the KF,so we used the From adn To and Did Offsetting.
Rgds
SVU123

Photos in Monitor Pixelated and Offset

All - see screen shot below. Don't know why the photos in monitor are pixelated and offset (echeloned to right by bands).
The same ones in slideshow viewer are fine. The problem is, when I preview, I get the bad shots. Need help! Thanks...
Bruce

Details?
This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Robohelp 10 and SharePoint 365

I´m testing Robohelp 10 with SharePoint 365.
I configure the Robohelp and SharePoint as the page: http://help.adobe.com/en_US/RoboHelp/10.0/RoboHTML/WS1b49059a33f77726-5aab66613798e5ec9b-8 000.html
On step 3, when I click on "File/Version Control/Add Version Control" and inform "SharePoint Site", user name and password, Robohelp display a message: "Error: The remote server returned an error: (403) Forbidden."
Anybody knows something about this error?
Thanks very much.
Luiza.

Hi Willam!
No. The test is not finished.
Robohelp display a message: "Error: The remote server returned an error:
(403) Forbidden."
I will test again.
Kind regards,
Luiza.
Luiza Albano
documentacaodesistemas.com.br <http://www.documentacaodesistemas.com.br>
Perfil no Linkedin<http://linkedin.com/profile/view?id=50672818&goback=%2Ewvp_1_1_*1&trk=tab_pro>
Skype: lfalbano
11 99782-6707
2014-03-05 7:57 GMT-03:00 Willam van Weelden <[email protected]>:
Re: Robohelp 10 and SharePoint 365 created by Willam van Weelden<http://forums.adobe.com/people/WillamvanWeelden>in
RoboHelp - View the full discussion<http://forums.adobe.com/message/6180710#6180710

Setting image zoom and offset properties in Forms 6

I have a Forms 6 form with an image item with "Sizing Style" set to "Adjust" and "Show Palette" set to "Yes".
When running the application, the users typically need to view approximately the same region of a set of images. Currently, they have to reapply their favorite zoom settings and move to the correct region whenever a new image is displayed. Now they would like the images to be displayed with their personal zoom and offset settings applied automatically.
Is it possible to figure out the zoom factor and region which is displayed in an image item? As an alternative, is it possible to intercept clicks on the image palette buttons?
Thanks, Beat

your test_image table better to have another primary key item like file_id number with table trigger to sequence generating its value for IF INSERTING event, or it will have no handle to get the image back.

How do i print to pdf from excel? I am using Windows 8.1 and Office 365 (new)

How do i print to pdf from excel? I am using Windows 8.1 and Office 365 (new)

Please see Huge lag in games on bootcamp as a reference. The linked thread is for a GT750m.
Since there are no mid-2013 Retina models (as per Apple - Support - Technical Specifications), assuming this is your Mac - MacBook Pro (Retina, 15-inch, Late 2013) - Technical Specifications - the same should work for you.

Can you specify the allowable values for vertical range and offset for the NI 5112 PCI Digitizer?

The NI 5112 manual indicates that the vertical range can be set from +/- 25mV to +/-25V in 10% steps. Can you explain exactly what this means? (For example, could you give me a series of allowable values.)
Also, what are the allowable values for voltage offset?
The reason for my question is: I am specifying the vertical configuration using the niScope_ConfigureVertical() function. The observed raw (8 bit) sampling does not appear to change at all for small changes in voltage range and offset. I would like to know where the hardware breakpoints are, so that I can apply correct scaling from bits to voltage.
In addition, I have tried to use the niScope_CheckAt
tributeViReal64() function to "check" a value before applying it to NISCOPE_ATTR_VERTICAL_RANGE or NISCOPE_ATTR_VERTICAL_OFFSET, but it fails in the linking step in Microsoft Dev. Studio. (niScope.lib & niscope_32.lib do not seem to contain any of the CheckAttribute functions that are listed in the NI-Scope function reference.)
Thank you for your response.

There is a nice reference at:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/38f18d418e2433ed8625690e006bbe94?OpenDocument
which explains that allowable voltage ranges can be expressed by the equation:
next_range_value = range_value * 1.1 starting at +/- 25 mV.
When a range is specified that does not match this series, the device driver rounds UP to the next value.

February is 29 days and offset -365 days offset is wrong

Similar Messages

Maybe you are looking for