Fed up with Airports! Using them as ipaperweights...

I was running two AX's one as a base unit connected via ethernet and a second as a WDS to extend range and play music on speakers. I was running V6.2 on both and started to have problems connecting to my ISP sign in page. I would receive an error saying "cannot connect to server" even though the status light is green and when I connect directly via ethernet I have no problems connecting. Ive tried hard resets, resetting my modem, and flashing directly through ethernet then connecting by airport but nothing seems to provide a lasting solution.
After reading several threads regarding the V6.3 firmware update I decided to try and upgrade to see if it would fix the problem and it didnt. I then decided to downgrade back to 6.1.1 hoping it would solve the problem and it didnt. This has been a very frustrating exercise and im very disappointed in apple for not solving this problem sooner. I hope the next update is released soon so I can put my AX's to better use than just sitting as paperweights on my desk.

Similar Messages

Does anyone else feel that Apple doesn't care about the issues we have been presenting to them? I have a lot of their products and I'm fed up with none of them working like they used to.

I'm not going into detail but I've had it with my products being so crappy lately. From what I've read, Apple seems to not care as long as they are selling products. They have not acknowledged or owned up to the issues we are experiencing. I feel like maybe a boycott is in order. I cannot be the only one that is this frustrated with my iPhone and iPad!

The mail in rebate tells me that you sign a 2 year agreement. I have no idea why what they quoated to is different then what you got You could always do this:
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
Make sure to read the customer aggreement so you know everything before callign in. This way you can know your rights. Customer Agreement | Verizon Wireless

Fed up with Airport Extreme card errors connecting to wireless network

Since buying my black MacBook in June I have been 'enjoying' completely haphazard connection to my (encrypted) home wireless network, and been forced to sponge off some neighbour's open network half the time, as I keep getting the message 'there was an error connecting to the ... wirless network'.
I HAVE connected to my network successfully, and from time to time the ghost in my machine does let the MacBook connect to it all by itself, so there is no compatibility issue as such. I had hoped that downloading the most recent Airport Extreme Firmware Update would help, as it promised to 'improve reliability', but alas. I've tried downgrading to 10.4.9 as somebody suggested on these forums, but that didn't make any difference, so I'm now back on 10.4.10.
The whole thing is driving me completely bonkers, so if anyone has any suggestions (or would consider joining me for a complaint to the Advertising Standards Authority about Apple's misleading advertisements promising that 'it just works'...) I would be most grateful.

Don't order an ethernet cable from the Apple Store, any geek worth his salt might have one in his back pocket or a few in his bag (probably calls it a "patch cord".) Even Target sells them for $7-8 but anyone in IT buys them in bulk for $1-2 or makes their own for even less (materials cost, anyway, but they do take a bit of time and skill to put the ends on correctly).
As for the wireless, I moved from a Powerbook G4 to a MBP 17" to a new MBP 15," and I have been very disappointed in how less stable the MBP wireless connection is than my old PB G4 or even my wife's four year old iBook as she sits on the couch near me merrily surfing away while I grumble. However, I have a cheapy SMC wireless router - I don't have the problem at work where we have Airport base stations or at many other places with different brand routers - it's tough to nail down, and it's **** aggravating, especially when working on a deadline.

Possible 10.6 Internet Solution with Airport using WPA2 Security.

Go to System Preferences, Network, Airport, Advanced, TCP/IP, Click on Renew DHCP Lease. This seems to work for WPA2 security in Airport utilities. Try this and let me know if this works for you?

I forgot to mention to disconnect your Airport for 30 seconds before you renew DHCP Lease. This seems to be working for me. This also seems to clear-up wireless printing problems with HP wireless printers.

Is anyone successfully using Netgear WN3000RP with Airport Extreme?

Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
I'm using Airport Utility version 6.1.
Can someone out there can let me know if they got this device working with their Airport Extreme?
Also, what are my other options to extend my range?

I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
A Visual Representation would be
ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. Does anyone know what the problem is?

I am running a 7 year old MacBook Pro 15. Since upgrading to Yosemite I can not run my airport express' without having to reset each of them every time I wish to use them. I did not have this problem with Mavericks OSX. Does anyone know what the problem is and is there a fix?

See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

How do i use my time capsule and extend the network with airport express

I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

Use the search as this has been done to death ..
Bob Timmons is the expert on this.. look at his answers here.
https://discussions.apple.com/thread/4274187?start=0&tstart=0
https://discussions.apple.com/message/21856077#21856077
This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
Apple doco is also good to read.
http://support.apple.com/kb/HT4145
http://support.apple.com/kb/HT4259
Note.
You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

TS3276 ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working fine

ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

I sync my iphone with my office computer, but what I really would like to do is syncing only the calendars (because my secretary uses them to set up new apppointments), but syncing all the rest on my home computer. Is it possible without losing apps or mu

I sync my iphone with my office computer, but what I really would like to do is syncing only the calendars (because my secretary uses them to set up new apppointments), but syncing all the rest on my home computer. Is it possible without losing apps or music?

Although not recommended, yes.
Disable automatic syncing when the iPhone is connected with iTunes on each computer.
The only item you will have selected for syncing with iTunes on your computer at work will be Calendars, which is selected under the Info tab for your iPhone sync preferences with iTunes. Nothing else will be selected under the various tabs for your iPhone sync preferences with iTunes on your computer at work. You will get a warning message that your iPhone is associated with another iTunes library on a different computer which you can ignore when syncing calendars/calendar events only with iTunes on your computer at work.

Can I use powerline wireless adapters with airport extreme

can I use power line wireless adapters with airport extreme?

Can this work?
Yes
I read somewhere that powerline adapters are not compatible with Airport.
That information is not correct.
If the AirPort Extreme is already set up as your "main" router, you would connect a short Ethernet cable from one of the LAN <-> ports on the Extreme to the power line adapter.
Locate another adapter in the area where you want to use the AirPort Express and connect a short Ethernet cable from the adapter to the Express.
Configure the Express to "create a wireless network" using the same wireless network name, same security settings and and same password as the AirPort Extreme network and select the Bridge Mode setting for the Express so that it work correctly on the network.

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

I have just upgraded to OS X Mavericks. It wanted me to upgrade my 20000 photos before the New iphoto could use them. I did. 43.6GB of photos became 1.8GB of very small photos of arounf 178KB instead of 2.5MB. Can't do anything with them. Help?

I have just upgraded to OS X Mavericks. It wanted me to upgrade my 20000 photos before the New iphoto could use them. I did. 43.6GB of photos became 1.8GB of very small photos of arounf 178KB instead of 2.5MB. Can't do anything with them. Help?

The obvious and simple solution is to restore from the back up you made before upgrading.
Other than that you'll need to give us a lot more detail. Mavericks doesn't ask you to upgrade your Photos, upgrading to a later iPhoto asks you about upgrading the Library. Where is the library? What version were you upgrading from? Anything else you can tell us that might help understand the problem you're having.

If I buy iTunes vouchers outside the uk can i use them with a uk iTunes account.

If I buy iTunes vouchers outside the uk can i use them with a uk iTunes account.

No. There are only good in the country in which they are purchased.

TS1702 My problem started after installing smartsync which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crash after using them for awhile. I have remove the smartsync app but my phone still behaves the sa

My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?

Eek. Sounds like something in the app caused some serious software issues. You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.

Fed up with Airports! Using them as ipaperweights...

Similar Messages

Maybe you are looking for