"Fedback" noise in caller's ear when I answer.

I have a Blackberry 8330 with Verizon and it's current OS is 4.5.0.77. I have the dreaded "speaker blast" every time I answer a call.
I logged onto Verizon's website and downloaded the 4.5.0.138 update and while it corrected the "speaker blast" issue, it created another. Several callers have complained of an ear-piercing "microphone feedback" type noise in their ear when I answer their call.
I've tried uninstalling and reinstalling the 4.5.0.138 update to no avail. I'm presently back to using 4.5.0.77.
Can anyone tell me if they've noticed anything similar and what you've done to correct it?
Thanks!

ok, I would recommend you upgrade the device to the 4.5.0.175 OS, the latest most recent OS for the 8330
Here's a link and instructions.
http://www.blackberryforums.com/general-8300-series-discussion-curve/207704-latest-os-8330-4-5-0-295...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak - I think that my ear piece and mike have both got magnetised how do fix the problem

I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
I think that my ear piece and mike have both got magnetised how do fix the problem
Please help

I have the same problem!! It lead to many other problems with my phone
I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally!

How can i stop my phone from vibrating in my ear when i am on the call?

How can i stop my phone from vibrating in my ear when i am on the call? I usually keeps my phone on vibration mode so i get notified when there is a new mail or message? However, when i am on the call, then also, it vibrates in my ear everytime a mail comes. Very irritating. I use my business phone and mails keep coming every 2-5 mins.
Please help.

very impractical . specially when you call A LOT and receive notifications constantly!

Why can caller hear me when i use and ear bud

Why can't caller hear me when I use an ear bud. I am using the same ear bud that I used with the Cosmos touch. The Cosmos 3 that I just received worked for awhile with the ear bud but not it's now. Any suggestions? I'm seriously thinking about going back to my Cosmos Touch, I'm not like this 3. The only thing I like about it is the keyboard.
Thank You

clb19,
We definitely want you to enjoy the new phone as well and it's imperative to get the earbuds working with the phone. Have you tried a different set of earbuds? It it one ear bud specifically? Other than this, do all other sound options work? Is there any damage to the phone?
AdaS_VZW
Follow us on Twitter at @VZWSupport

Signal-noise while calling

Hi,
I have the problem, that i can hear the signal noise between iPhone and transmitting pole (the noise that you can hear when you get to close to a loudspeaker with your mobile phone). I can hear the noise all the time when i'm doing a phone call.
The guy at the support hotline was asking if this problem is already known and then he told me that this is normal für the iPhone 4 and he said that my hearing seems to be good, because i can hear the noise o.O
I tested iPhone 4 and iPhone 3gs at the same time and in the 3gs there was nothing to hear.
Does anybody else have this problem?

Hey guys, same thing with my iphone 4..
signal noise while calling while not having a 3G connection.. (and sometimes even when the call ended, the ear speaker is still buzzing)
Anyways; if it's a software issue: 8 sept. maybe fixed in the expected update or wait till the 30th, when (as rumors go) a new iphone 4 will ship; without antenna issues..
By the way; are we the only ones having this problem? Or are we the only ones noticing it? Anyone tested it with iphone-4-friends?
gtz!

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when on calls using internet based / native apps like viber or skype, people can hear me just fine. Voice memos work too and have already tried different SIMs

On my iPhone 4, people cant hear me when I make and / or receive normal (GSM) phone calls. But when I make/receive calls using internet-based / native apps like viber or skype, people can hear me just fine. I have tried recording my voice using voice memos - this works. And have already tried different SIM cards but the problem persists.
I have taken my phone to an authorized Apple service center, where they restored my phone to factory settings, but still facing the same issue. They service center directed me to Apple Customer Care Hotline, where I have now spent 3+ hours explaining my issue and yet no one can resolve it. The easy answer if to replace the phone - and since it is out of warranty, I am expected to pay for it.
Additionally, the customer service has been so rude and confrontational that it has completely changed my view of Apple and its customer focus. I am a disappointed and angry customer today - people would be surprised to hear just how rude customer service was including making statements such as "Apple doesnt make infallible products, that's why warranty is needed for our products" and that "every product undergoes a problem at some stage, so do ours!" There goes whatever confidence I had...
My concern is simple - if no one at Apple and / or its CS hotline is able to address my issue comprhensively and keep telling me that they have never encountered a precedent before, then with what right can they expect me to pay for a replacement?! I am NOT here to fund Apple's research into their product faults and manufacturing.
And even though a customer is out of warranty, is it too much to expect an Apple product to work well for at least a 'reasonable' period of time. My phone is less than 18 months old and has been facing this issue for the past 2 months - surely the longevity of Apple products is more than 18 months!
Just a sad sad day for an Apple customer, compounded by unjustifiably rude and aggressive staff. And still no resolution to my problem.

I am having the same issue - with my last 2 iPhone 4's. My first handset each time I was on a call wether it was up to my ear or on loud speaker, the call would automatically mute even though the mute button wouldn't show up as highlighted. Pressing the mute button on and off during the call doesn't fix it either. I rang Apple and asked what some of their trouble shooting solutions were. I got told that it might be a software issue and to install the latest software update. This failed. I then got told to uninstall the software on the phone and do a complete restore. This also failed. After trying the troubleshooting suggestions, I took the phone into my provider and they sent me out a new phone within a week under warranty claiming it was a hardware issue and probably just a "glitch" with that particular phone. This was not the case....
After receiving my second iPhone 4, I was hopeful that it would work. For the first couple of days, making/receiving calls was not an issue. Until after about a week, the same problem started again. In one instance I had to hang up and call back 4 times and the call would still automatically mute after about 5 seconds. Also on the second handset, the main camera located on the back of the phone has red and blue lines running through it and can't take a decent picture. So back to the store I go to get another replacement - Again.
For a phone that is rated highly and as a keen Apple product purchaser, I am a bit disappointed with the experience I have had with the iPhone 4. Let's hope they find a fix sometime soon because this is becoming a bit beyond a joke.....!!

Alarm sounds in my ear when I'm on the phone

I was wondering if there is a way to program my phone so the alarm doesn't sound loudly in my ear when I'm speaking on the phone. Sometimes I receive calls before my alarm goes off. In the middle of the call, the alarm sounds loudly. Is there a setting I can change so that when I'm using the phone the alarm is silenced automatically?

There is no setting for that. You can make a suggestion to Apple at http://www.apple.com/feedback/

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs

if they are unable to update all languages in a normal time gap (it is now 6 months ago they released firmware 4.22 for the first product code (actually mine and maybe a few others)), they should not offer those many versions. the huge bug with out of memory in nokia navigator with firmware 3.58 is not fixed yet for those people. really absolutely not acceptable.
besides that, currently my phone is in a nokia service center, microphone doesnt work anymore (the one who i call just hears a very loud noise). my brother got the same phone, his one is in nokia service center since 2 weeks now, because it doesnt charge anymore as there seems to be a connection broken inside the phone).
well that will be fun if the phone returns (approximately 4 weeks), as I guess the phones will have new IMEIs as they will send 2 new phones and not fix the problem (would cost them more). but as i got a western europe with nordics-map licence locked to the imei, the next problem will be there after I get a nokia 6110navi with another IMEI back. i get really upset with this really slow support.

Weird noise coming out of ear piece

So everyone knows the noises an iphone makes when you place it near speakers, a radio, etc. That's fine. My problem is that i am hearing these noises for about the first minute of phone calls i make. It doesn't happen all of the time... maybe about half of the time, but it's absolutely maddening!
has this happened to anyone else? is there a fix at all?
I keep bringing the phone in to the apple store and they keep giving me new ones. it's almost embarrassing at this point. I have the worst luck ever!

The odd noise is called tdma interference and is caused by all gsm products. it is just an indicator of network activity.

C3 is making a loud crackling noise to caller

Hello can anyone help!!!! When i get a call i can hear the caller but they hear a loud crackling and hissing sound, does anyone know what is wrong with it and how to fix it??? PLEASE x

SAme problem here. after I Charge C3, and smb caals me they some crashing noise!!!

How to call an action when the user selects a radiobutton

Hai
PLease help me in providing the information.
In my Project i have two radio buttons as
New
Asssessment
when the user selects new button, i want to automatically call an action in the controller(.jpf file)
Simalarly when he selects the other radio button i need to call a separate action in the controller.
Remember i dont have the submit button.
I want to dynamically call an action when the user selects the radio button.
i dont have any field inthe radio button which actually takes action as an attribute .
please provide me the necessary

Hi,
You can use JavaScript to call the action in interest upon the Radio Button Element Being Selected.Should be simple, and if your controller is part of the portlet dont forget to use the jpfScopeId to asscoiate the controller instance with the one in the portlet.
Let me know if you have any further questions.

The only time the sound/speaker and mic don't work is when I answer or make a call

The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

I can not get my itunes to recognize my ipod touch, I called support and when i found out there was a charge I politely said no thanks and hung up. now I can't even get the itunes to download!!

I have tried since Chrismas to use my Ipod touch and have not been able to! I have uninstalled and reinstalled itunes more often then I care to admit! I called support and when I found out there is a charge ($59.95) I declined and hung up. I now can't even download itunes! I guess I find that a little fishy. I was so happy with this gift and now I am so frustrated I am about to return it and never purchase another apple product again! I have gotten nothing but the run around when trying to get assistance for a very expensive music player! HELP PLEASE

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

How to call a BAPI when there are structure tables as Input.

Environment: Data Services 3.1 SAP ECC 6.
I can run simple BAPI's where I just populate the Input Parameters.
My question is around more complex BAPI's.
I created a data flow that looks like:
Row Generation > Query > Unnest Query > Template table.
Inside of the query I created a new Function and called the BAPI_PROJECT_MAINTAIN.
This BAPI requires adding data as part of the Structure Tables in the BAPI. I see these tables in the SAP Data Store and I also see a single input field in the Data Services Function Wizard that desribes the Structure.
My question is - how do I populate the fields when it comes from a Structure Table in the BAPI?

A table parameter is a schema, so you need an upfront query where you create that schema with the nested data. The schema is then mapped to the table parameter, the columns of the schema have to match by name.
https://wiki.sdn.sap.com:443/wiki/display/BOBJ/Calling+RFCs-BAPIs

"Fedback" noise in caller's ear when I answer.

Similar Messages

Maybe you are looking for