Federated Portal - Issue running WebI and Crystal in Enterprise portal.

Hi All,
We have connected our BI portal to Enterprise Portal . The federation works fine for Bex 7.0 queries. But when we run WebI and Crystal Reports ...We get the following error
Portal Runtime Error
An exception occurred while processing your request
Exception id: 05:20_30/03/10_0027_1281950
See the details for the exception ID in the log file.
We looked in the log file and this is what we see.
"PortalRuntimeException: Exception in SAP Application Integrator occured: Missing Property 'ClassName' in property file for layer'BusinessObjects/SSOLayer'."
Others have posted the same question in forum but there is no answer. Could any of you resolve this issue??
Thank you in advance,
Aparna

Hi Hanif,
I'm working on federation between EP 7.4 and EP 7.0.
Do you have any links on FPN in EP7.4.
Thanks and Regards,
Pradeep

Similar Messages

Bex Query Variable error in Webi and Crystal for Enterprise

Hi,
We just upgrade to BOBJ 4.1 SP2 and BW7.4 SP5
I am creating a webi report based on a BEx query. There is Variable on Period/Fiscal Year from BEX side(Mandatory prompt) when I try to create a Webi or Cyrstal for Enterprise report the below error pops up. Other Bex queries work correctly. Can it be the values in the variable the following values exist when execute from Bex i.e. 001.2012; Period 2013
Is the SAP Note : 1611185 relevant for 4.1 SP2
Error:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Termination message sent
ABEND DBMAN (257): SQL Error: INTERNAL_ERROR
MSGV1: INTERNAL_ERROR
Is this True for BOBj4.1 SP2?
http://scn.sap.com/thread/3362312
Selection range variables are not fully supported in Crystal Reports for Enterprise.
Message was edited by: Tienie Nothnagel

Henry Banks wrote:
> I know what you mean. In BEx, it's automatic: the default values are pre-selected at runtime, based on user authorizations
>
> In WebI, user needs to do a 3-click workflow to select the authorized values from the prompt dialog. This can be broken down into 3 phases:
>
> (a) initialize prompt u2013 empty pane.
> (b) refresh list of values,
> (c) select response values.
Thanks Henry! I was looking for this confirmation that it is a limitation of Webi and I'm not missing something.
Henry Banks wrote:
> ---> make this BEx variable u2018mandatoryu2019 u2013 this will trigger an automatic refresh mechanism on the list of values, and show it to the user. This will eliminate steps (a) & (b).
>
It is not possible to set Authorization variables as mandatory. They are set to "optional" and cannot be changed (BEx limitation).
Henry Banks wrote:
> Unfortunately, BEx and WebI are not like-for-like replacement tools. Not all u2018normalu2019 BW features integrate natively into BObj.
> So this will also have to be an excercise in positioning a new product to your onboarding users. (i.e. just click the button)
> Regards,
> H
I understand that. Thanks for your suggestion.

Empty report returned from WEBI and Crystal report when using external hier

Hi,
WEBI and Crystal report build from BEX query returned empty report when we used external hierarchy 0PROFIT_CTR. In BEX we don't have any problems with it.
No authority check is perfomed on the hierarchy when we start the report in WEBI/Crystal. Only check on the hierarchy is performed when the root authorization is assigned to the user

We using BO4 SP12

Merits and Demerits of WEBI and Crystal reports!!!!!!!!!!!!!!!

Dear Experts!!!!!!!!!!!!!!!!!!!!!
I came up with many documents, but i cannot able to find the exact merits and demerits over WebI and Crystal Reports.
Experts can u people help me out in this regards,
Atleast the comparison between them.
Regards,
Suman Thangadurai

What angle are you coming at this from?
Are you talking about in terms of replacing Deski?
Or as a first reporting tool to learn?
If you're moving away from Deski, I'd personally go for Webi. Very small amount of learning required to move from one to the other. It's also much easier to pick up and start working with.

Embedding WebI and Crystal reports on a web page

Hi,
I'm new to BO, so please bear with me. I've also posted this to the .NET-side, so sorry if you've seen this post before.
We have a project where we will need to embed WebI and Crystal reports on a web page, i.e. we want the people who access the web page to get the reports (mainly graphs) as embedded content on the web page without any controls and other clutter.
Is this possible and what's the correct way of doing this?
Thanks,
Carl

Hi,
Thanks for the help!
We still face the original problem, though. I.e. with openDocoument we get the report, controls, tab selections, scroll bars etc. What we actually would like is to get just the contents of a report.
Is there any way of doing it? We're not afraid of coding, we have good developers. Or do we need to schedule report creation to some format (e.g. PDF) and then load the PDF to the web page?
Basicaly it's more important to get this working for WebI reports as we can redo almost all reports from Crystal to WebI. Of course we are happy to find a resolution for both cases.
Br,
Carl-Gustaf

Integration of WEBI report in SAP Enterprise portal

Hi Colleagues,
I want to create my adhco report using WEBI and want to publish it to SAP NW Enterprise portal .
While creating the i view in the EP i dint find any option in i view template in order to create an i view for WEBI report .
However there is an option to choose crystal report as a template while creating an i view but nothing for WEBI and Xcelsius as such. So how can we embedd our Xcelsius and WEBI report in SAP Enterprise portal .
Is there any option to intergate the SAP NW Enterprise portal and BO Portal .
Kindly sugest.
Vibhav.

You should be using opendocument links if using EP. with opendocument the URL contains all the pertinent info.
refer to chapter 8 of the SAP Integration kit guide for more info.
Post in the webi, general, or check out the outher documents link in the forum sticky post for the latest opendocument doc.
Regards,
Tim

Running WDA ABAP on my Enterprise Portal

I have two systems (Netweaver 2004s Java and Netweaver 2004s ABAP) running on two different computers. I have developed an ABAP WDA, tested it and works fine in my SE80->Test Application.
Question 1:
I want to run this now on my Enterprise Portal (Netweaver 2004s Java). Have any of you done this? If so, can you please send me a step-by-step procedure.
Question 2:
I am disappointed by the fact, that Netweaver 2004s ABAP does not have an Enterprise Portal unlike Java. Can anybody tell me if there is a workaround that I dont know of, so that I dont have to go through the process in Question 1 to see my WDA ABAP run on a Portal.
Thank you in advance for your time, effort and generosity to share your valuable knowledge. Its greatly appreciated!
Nagesh

Hi. You will need to set up a system configuartion in your portal to access the ABAP stack.
1) First you need to set up the portal so that it knows the system that you want to connect to. Here is the documenation for setting it up. Once you setup the system, you simply create an iView. When you create the iView it will ask you which system you want to connect to for this WDA app.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/0339040c0b11d7b84800047582c9f7/frameset.htm
You will want to use the "template selection" at the appropriate point in the system config wizard. Also you probably want to use the "SAP system using dedicated application server"
2) The portal is implemented on the java stack only, there is not portal that runs on the abap stack. I'm not sure that SAP plans to create there own portal framework on the ABAP stack. Even the portal on the java stack was purchased.
Regards,
Rich Heilman

UI5 launchpad and panels for Enterprise Portal

Hi,
Is it possible to configure UI5 Launchpad and Panels for Enterprise Portal (not NWBC)?
If yes, are there any instructions how to do it?
Best regards,
Veera.

chk below for this u have activate the functionality in sicf for ui5 : -
Configuration: ESS (SAPUI5) in SAP NetWeaver Portal - Employee Self-Service (SAPUI5) - SAP Library
Configuration: MSS (SAPUI5) in SAP NetWeaver Portal - Manager Self-Service (SAPUI5) - SAP Library
http://scn.sap.com/community/developer-center/front-end/blog -----covered all
http://help.sap.com/erp_hcm_ias_2013_02/helpdata/en/65/1c9a5181235905e10000000a44538d

Issue with Web report interation on CRM Portal (7.0)

Hi,
System Landscape/Access route: CRM Portal (7.0) => One BI System (ABAP + JAVA = 7.3 SPS 5 Patch 3)
After we upgraded our dual SID One BI system (BI-ABAP + BI-JAVA) to 7.3 SPS 5 Patch level 3; the CRM Portal (version 7.0) which uses Application Integration iViews to launch One BI reports has following issues:
1. Buttons like Open, Save, etc. do not work
2. Drag-drop of characteristics from Free-Characteristics into report does not work.
These functionalities work for the same query if I copy the BI-Java stack URL in a separate internet browser. But the same query / URL does not work when rendered via the CRM Portal.
All these functionalities were working prior to the One BI upgrade. Can you please guide on how to fix this issue?
Thanks and regards,
Pratik

Hi,
Kindly confirm what was the earlier version of the One BI System (ABAP + Java), before it was upgraded.
Thanks,
Swapna Priya.

Help requested on WEBI and Crystal Reports

Hi All,
1. Our Sys Admin has installed Business Objects XI Enterprise Server on the Corporate Development Server. The objective is to develop few WEBI objects and Crystal Reports and deploy on the Development Server for further testing. What developer tools I need on my local system to develop WEBI Objects and Crystal Reports?
2. For crystal reports is there a need to develop universe, or is it possible to fetch from the database directly if the DB meets all the data needs?
Thanks in advance
Sunny

Hi gudurusk,
For CR creation the you need Crystal Reports. Thats a Report developing Tool which needs to be installed local on your Desktop PC
WebI is a Java based Reporting Tool. So you create your Reports in a Web Browser. You LogIn to InfoView and click New -> Web Intelligence Document and start.
Crystal can do both. It can report of a Universe and can by directly connected to your DB.
Regards
-Seb.

Possible to run web dynpro apps without a portal??

Hi
Is it possible to run Web dynpro apps on a WAS without a portal?
Thx

Ah,
Absolutely possible.
Use url like
http://host:port/webdynpro/dispatcher/com.your-company/yourappdc/AppName
in your browser address bar
Valery Silaev
SaM Solutions
http://www.sam-solutions.net

Performance issue of BI Reports in SAP Enterprise portal -in SAPNW2004s

Dear friends,
We are integrating BI Reports in SAP Enterprise Portal 7.0 ( SAP NW- 2004s).The reports are running properly .But the issue here is reports are taking long time to open and leading it to performance effect.
Reports in BEX( Bi side) working lilttle better than EP platform.
And Even BI team is looking for ways to improve the performance.
Could you please share your ideas to implement in portal side to increase the performance.
Thanks and Regards
Ratnakar Reddy

Hello Mr. Reddy,
There are two possibilities for slow performance in BW reports, so we need to look into wether its slow in the BW system or at the frontend.
If the problem resides in the BW system then we should be able to trace the reports
and you can go for a SAP EW or GV sessin and SAP will provide recommendations.
If the problem resides at the frontend
Update the frontend servers to the latest frontend release.
Recommended Frontend Release 700
Recommended Frontend Patch 18
Update the frontend servers to the lates SAP GUI release as soon as possible.
Minimum Recommended SAP GUI Release 6.40
Your frontend PCs should fulfill the following requirements:
Each frontend PC should have 500 MHz and 128 MB main memory.
Because of a limit in the addressable memory, Windows 95 is not supported as Frontend OS for 3.X BW Systems. Please refer to SAP Notes 161993, 321973 and 366626 for details.
Please also check SAP Note 147519 "Maintenance strategy/ deadlines 'SAPGUI'".
If you still require any assistance from SAP support then raise a message under component ( probably BW-BEX-ET-WEB).
Provide your input, if you have any.
Thank you,
Tilak

Performance issue of BI reports in SAP Enterprise portal

Dear Friends,
We have integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to performance effect.
In Bex ( BI side) reports performance is little better than SAP EP platform. BI Team also looking for ways to improve performance at BI side.
Could you please share your valuable ideas to improve the performance at SAP EP side also ..
Thanks and Regards
Ratnakar Reddy

Hi ratnakar,
The first step is to identify which component is causing the performance problem. Run your report in the portal but try appending the string &PROFILING=X in the end of the URL. This will generate BI statistics which you can use to see which component (Java stack, ABAP stack, Database) is causing the performance issue.
Hope this helps.

Getting the Username and password Of Enterprise Portal in WebDynPro

Hi Friends,
          I have developed one webdynpro application to read the excel sheet from KM Repository. i have used URL to open the connection to that excel file and to get the Inputstream.
          While opening the connection to the excel, I've hardcoded the username and password. I need to get the username and password of the user who login into the Enterprise portal and runs that application. then i need to pass that username and password along with URL of the Excel sheet.
          Could you people find the solution and replied to me. I am waiting for your bright answer.
Thanks and Regards,
Sandeep Kumar Bonam.

A very standard question in this forum.
Refer this :
Re: How to get User Id in Web dynpro application
Regards,
Subramanian V.

How to create the web based report without enterprise portal?

Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.

Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish

Federated Portal - Issue running WebI and Crystal in Enterprise portal.

Similar Messages

Maybe you are looking for