Federated Portal Language change not visible on remote role

Hi,
Remote role assigment is done on consumer portal. This remote portal role comes from a BI Producer portal.
This roles has worksets and iviews attached to it like km navigation iview etc.
User on consumer portal has options to change his language to french from default english.
Here the issue is, this language change does not reflect or apply to the remote role and its iviews or contents.(It continues to show in english) . But it works without problem o n local roles or ivews as expected.
Any idea on how this language change can be effected on the remote role and its contentc will be much appreciated.
Regards,
Ashok D

Hello Ashok,
You must remember that because this is RRA the content will actually run on the producer (unless this is an AI iView).
This means that the language will be determine according to the user's language defined on the producer itself, therefor you have to change the language of that specific user on the producer portal.
If this does not help it might be that the iView is forcing the language, then we'll have to try somehthing else.
Update me with the results of the first triage,
Also have a look at SAP Note # 1295703 under the Language category, it explains the algorithem of determining the language.
Best Regards,
Nadav.

Similar Messages

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

Please help my flv video file works perfectly localy...but its not visible in remote ftp why??

hi All,
Please help me. my flv video file works perfectly localy in
my computer...but its not visible when i uploaded the flv html and
flash files to ftp?
thanks in advance

This suggestion worked to see the hidden folder(s). Thanks very much, but I feel like I am miles away from moving my ipod music to my new computer and getting it all to work. Here is why...
1. First when I plug the ipod in, in disk mode, to the USB slot it shows up as a K drive for a minute or so and then disappears. itunes keeps opening, asking me to sync (which will erase all my music on the ipod!) and the K drive (ipod) vanishes.
2. I pod help says to drag the itunes file out to the desktop and then drag the itunes file on the ipod into the "my music" file within documents and settings. However, there is an "ipod control" file (was hidden) and within this there is the following: artwork, itunes (with 13 subfolders of its own), device, and music. So do I just drag the itunes file inside ipod control into My music? Or do I drag the whole ipod control file? or other?
3. Additionally there are K drive (ipod) files for calendar, photos, contacts, notes, and ipod control (was hidden). I don't care about any content in the first four, but are they needed to operate? Do I drag these over also to the My music file?
Whew, very frustrating. Thanks, Ric

ISE 1.2 Sponsor portal port change not working

Hi,
Has anyone else had an issue where they change the default port number of the sponsor portal on the Admin node, all ISE restart, but the sponsor portal still only works on the default 8443 port?
Thanks,
Ct

Hi,
As you know that default port is 8443, but you can change this value so ensure that the same value you assign to the switch and it matches the setting in Cisco ISE.

Web Template Changes not visible after transport from Development to Test

Weu2019ve run into a problem doing web development in BI 7.0 that I suspect someone has seen before and may quickly be able to point us in the correct direction. Changes that are made to web templates in the Web Application Designer are correctly transported from development to the test environment, but we are still seeing the old version of the template when the report is executed. We are able to see the web template changes in the Web Application Designer in the test environment. We believe this is a caching issue and have cleared the query cache and the HTTP cache in SMICM. Unfortunately, this has not resolved the issue. Can you suggest another approach to resolve this issue?

Not sure what you mean by browser cache. We have deleted history, cookies, and all temporary Internet files. The issue isn't limited to a single user, but exists for all users. Through extensive testing we have established that you are able to see the web template changes in test in the WAD(Web Application Designer) after they have been transported from development, but can only view the changes when the web template is run for the first time. Changes to existing templates can be seen in the WAD in test, but are not seen when the report is run. The old version of the template appears to held in cache somewhere, but we haven't been able to find it and clear it.

Editing the master page of My Site - Changes not visible to all users

Hi!
I opened the mysite.mydomain.com site on my SP designer and made some changes in a master page located in the Master Pages library. I checked in the changes and now I can see them when I open the site on my browser.
But only when I use the account that made the changes using the designer.
How can I propagate these changes to be visible to all my users?
Publishing features in are enabled already.
Thanks!
Dimitris Papadimitriou, Software Development Professional

No! Duh!
I forgot about that part! Actually I don't see this option in the designer. I had to go to the browser to do it. Anyway, now it works! Thanks!
Dimitris Papadimitriou, Software Development Professional

E-Commerce 5 - changes not visible after Check In

Hello all,
I have made some changes to a few .jsp files on the SHRWEB development components.
To do so we did the following procedure .
Our Basis created a track and I imported it to the Netweaver.
I created a project for the inactive version of the relevant packages .
I did some changes and then checked in .
Now, when i log on to the test environment (where the Netweaver also connects) I do not see any of these changes .
I have tried to edit the "welcome.jsp" under the b2b folder, just to verify that the problem is not that I am editing the wrong files and still nothing happens.
I also rebooted the server twice and still the problem persists.
Could you please advice ?
Thank you all for your kind help .

(1) If you have a local server, did you try to build locally, deploy locally and test.
(2) After checking-in your changes, did you activate, transport?
(3) Did the Basis team deploy the changed components to the target server (development server in your case)? If you want auto-deploy, you can set so in the NWDI Transport Studio settings.

Query changes not visible in Crystal Reports

Hello
I'm building a report on top a BI query. To solve some design problems I had to change my query in Query Designer. But I can't see those changes in Crystal Reports. The fields are the same as before, even when I click on 'Regenerate' in the context menue in Field Explorer.
Do I really have to build a complete new report to see these changes in Crystal Reports?
- Crystal Reports 2008, V1
- SAP Integration Kit 3.1
- Query designed Business Explorer 3.5 and 7.0 (effect appears with both versions)
- SAP GUI 710, Patch 11
Thank you for you help!
phil

After some more digging in this forum I found a solution to my problem in a totally different thread. It apparently needs two clicks:
1. Menue Report -> Verify Database
2. Menue Report -> Regenerate Data (freely translated from german CR)

Image not visible on remote site

HI,
I have a set of pages made with templates . There is a
problem however : certain images don't appear on the remote site
and are replaced by red crosses.
I send an example : when clicking on the image , a wider
version should appear but instead there's a little red cross . It
works fine on my preview browser. Do you know how to solve this ?
Thanks .
This is a link to the file, try to cclick on the image :
http://perso.wanadoo.fr/brunierbrunojulier/IllustrationsFrame-02monument1.html

You are linking to your template which you have uploaded (?):
<a href="Templates/IllustrationsFrame-02girlWaving.dwt"
class="navigation2">WavingGirl</a></td>
Jo
"bejim" <[email protected]> wrote in message
news:e389mc$1p5$[email protected]..
> HI,
> I have a set of pages made with templates . There is a
problem however :
> certain images don't appear on the remote site and are
replaced by red
> crosses.
> I send an example : when clicking on the image , a wider
version should
> appear
> but instead there's a little red cross . It works fine
on my preview
> browser.
> Do you know how to solve this ? Thanks .
> This is a link to the file, try to cclick on the image :
>
http://perso.wanadoo.fr/brunierbrunojulier/IllustrationsFrame-02monument1.html
>
>

Service Desk messages not visible with SAP_SUPPDESK_ADMIN Role

Hi,
We are configuring Service Desk in Solution Manager 7.0 Ehp1.
I am able to see the support messages from the user 'BASIS' with SAP_ALL authorization.
There is another user 'X'. Here User 'X' has following Roles - SAP_SUPPDESK_ADMIN, SAP_SUPPDESK_CREATE, SAP_SUPPDESK_PROCESS, SAP_SUPPDESK_DISPLAY, SAP_SUPPCF_ADMIN, SAP_SUPPCF_PROCESS, SAP_SUPPCF_DISP.
After this I set the message processor to be user 'X'.
Now when I try to see the message with T-code: crm_dno_monitor, it is not displaying any messages.
But as per the Solman Security Guide, SAP_SUPPDESK_ADMIN and SAP_SUPPCF_ADMIN are master roles for Service Desk.
Please help in resolving the issue.

Hi,
Do you mean you logon to the system as user X, and create a test message under user X, and not able to see the message
created ?
Are you able to see in SOLMAN_WORKCENTER ?
Regards,
Vincent

Federated Portal - ESS/MSS remote content copy / remote delta link mode

Hello,
We have established an Federated Portal Network between two Enterprise Portal systems.
The Consumer System is an Netweaver Enterprise Portal, the Producer also an Enterprise Portal installation + XSS.
We use remote role assignment and remote delta link functionality between this two systems.
We have an request to enable BI JAVA Iviews on the consumer and as transitive content sharing is not provided, we would like to copy the ESS/MSS roles as remote content copy/remote delta links from the producer XSS system to the consumer system.
When we try to copy the ESS or MSS roles the copy process end with the following error message :
"Due to an unexpected error the action will be canceled"
The remote content copy/remote delta link usage mode is working correct on other roles
Is this a restiction that ESS/MSS roles can not be used in remote delta link mode ?
Is there an workaround for such usage type ?
Thank you
Best Regards
Martin Vartik

Hello,
We have established an Federated Portal Network between two Enterprise Portal systems.
The Consumer System is an Netweaver Enterprise Portal, the Producer also an Enterprise Portal installation + XSS.
We use remote role assignment and remote delta link functionality between this two systems.
We have an request to enable BI JAVA Iviews on the consumer and as transitive content sharing is not provided, we would like to copy the ESS/MSS roles as remote content copy/remote delta links from the producer XSS system to the consumer system.
When we try to copy the ESS or MSS roles the copy process end with the following error message :
"Due to an unexpected error the action will be canceled"
The remote content copy/remote delta link usage mode is working correct on other roles
Is this a restiction that ESS/MSS roles can not be used in remote delta link mode ?
Is there an workaround for such usage type ?
Thank you
Best Regards
Martin Vartik

Portal content not visible after installation nw2004s

Hello
Portal Content folders not visible after logon to EP after installation
using the url http://172.22.218.120:50400/irj
logon is using Administrator id.
top level navigation is displayed. but no folder hierarchy in PCD.
Please help
regards
John

Hello John,
Used the host name instead of the ip address in the url http://<host name>:50400/irj/portal.
Maintain the host name in the host file of the OS.
ip address host name.
Regards
Deb
[Reward Points for helpful answers]

How to make Federated Portal Network Content available in a Consumer Portal

Hello Experts,
we have the following situation:
We have two NW 7.0 Portals: 1 Main Portal on and 1 BI-Portal
We would like to do a remote role assignment via the Federated Portal option in the Portal, so that we can make the BEX-Explorer role from the BI Portal available in our main Portal.
I've already created a connection to the BI-Portal (Producer-Portal) in "Federated Portal" and have already registered the main portal as the Consumer in the BI Portal. I used SAP Help for that:
http://help.sap.com/saphelp_nw04s/helpdata/en/67/7e70424edcc553e10000000a1550b0/frameset.htm
Now I have the problem, that I can not find the remote role from the BI Portal in the Identity Management of our main Portal? Does anybody has a idea (or maybe a solution ) how to fix this problem? The SAP Help is not very helpful, it always deals with the same notes...
Regards
Andreas
PS: Of course u can earn points!!!!

Hi
first of all i would check that the SSO is working between the two portals..
Log into one of the portal.. Change the URL to the other portal. If you have to log in, then there is a problem with your SSO. Remember to have enough permission on both the portal.
If that works, then log into the consumer portal and check what you find in the portal content of the producer portal.
Let me know the result, and I will help you further..
Best Regards
Kristoffer Engh

Using GRC in a Federated Portal Network

Hi All,
We are usning a Federated Portal Network and would like to do Role provisioning through GRC.I know that GRC can do role provisioning in one single portal.
I would like to find out if it can be done in a Federated Portal Environment in which I have a Consumer and Producer Portal.
In Simple Terms - I would like to Assign a role that is present in the Producer Portal through the Consumer portal (This is called as Remote Role Assignment) using GRC.
Can anyone please help me with this.
Any thoughts will be very helpful.
Best Regards,
Vivek

Hi Vivek,
I have worked with CUP and EP and it works fine. I have not used CUP with Federated Portal so I don't have idea about this. It seems it will act something like CUA for EP. Am I correct?
CUP works with CUA but for that, it has to bec configured for CUA. I don't see any separate configuration for Federate Portal. Can you open a Customer message with SAP about this?
I doubt this will work but it is worth a try. Please let me know about the outcome.
Regards,
Alpesh
SAP GRC Manager (PwC)

SSO in federated portal network?

Is it possible to connect two portals while the user IDs are different? Is it possible to change user id while LogonTicket transfered from consumer to producer. If FPN not provide this feature, are there any substitute solutaions to implement it?

Hi,
If you are working with EP 6.0 then it is possible for your to access two portal with different user id uisng Remote role Alias.
But in the Case of EP 7.0 it is not possible to access two portal with different user id.because in EP 7.0 i portal connect to another portal with Logon Ticket methode.
if help full rewards points
thanks
chitta

Federated Portal Language change not visible on remote role

Similar Messages

Maybe you are looking for