Federated Portal Network Blues - can not connect to WSRP producer

Hi,
I'd like to embed some JSR-168 portlets into my SAP EP but fail immediately when trying to add the WSRP content producer.
I have a setup of two portals, one is SAP EP 2004s (SP13) and the other a JBoss Portal v2.6.4. I'd like to share my JBoss portlets to SAP and vice-versa for evaluating the interoperability of SAP systems with the real world.
But alas, I'm struggling on the basic setup of my SAP EP...
Here is my problem:
When I configure a WSRP-producer it all seems to work right but I can not connect to it, e.g. I can not register and test the connection. The connection test fails because of :
Producer object was found
Could not retrieve the WSDL file; the handshake URL may not exist or may be invalid
The SAP systems runs behind no proxy at all, so this can't be the issue. When testing the same WSRP producer URL from JBoss portal it all works fine. The URL I used was a WSRP test site from Oracle, see [http://portalstandards.oracle.com/portletapp/portlets?WSDL].
Does anyone have a glue what might be missing on my SAP Portal? The standard log gives me no clues at all I've been tail minus effing the thing for hours...
The SAP documentation - SAP Library, various E-Learning things - couldn't solve the problem for me...
Thanks for your support!
regards,
Christian

Hi,
Unfortunately I do not have any experience with connecting to JBoss, but perhaps this document can help you analyzing your issue:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/703cfbbd-e85e-2a10-00a3-ecd502c08e82
Good luck!
Best regards,
Jan Laros
PS. Please award points when helpfull.

Similar Messages

How to configure KM in federated portal network

Dear Friends,
Can anyone help me in configuring KM in federated portal network. If KM is configured in producer portal how to make use of that KM content in consumer portal.
Is it possible to directly configure KM in consumer portal?
Please help me out.
Thanks & Regards
Sireesha.

Hi Sireesha,
1) In order to use all capabilities provided by Knowledge Management, the
recommended solution would be to use KM only on one portal in the federation.
This could be the central consumer portal or alternatively one of the producer
portals. Then all features, like versioning, taxonomies, approval workflows,
subscriptions, template-based publishing will be available in this portal.
2) In case KM has to be federated to different producer portals, KM iViews (e.g.
Document iViews, Navigation iViews) could be integrated with the content sharing
modes provided by FPN. However, this is not a deep integration, because only a
redirect to the remotely located iViews is performed. The services themselves, like
taxonomies, will not be available in the consumer portal.
The recommended approach is to Configure KM on Consumer Portal only or Producer portal only.
Regards,
Shailesh Nagar

Federated Portal Network not working - specific scenario!

hi,
I tried to implement Federated Portal Network between three systems.
2 Producers
1 Consumer.
The systems i use are in the following fashion
Producer 1: Sneak Preview NW04s EP700 SP09
Consumer : Sneak Preview NW04s EP700 SP09
Producer 2: NW04s Full Version (EP 700 + BI 7.0) SP09
The scenario between Producer1 and Consumer works fine. I'm able to see the roles that are in the Producer1 from my consumer.
But the scenario between Producer2 and my COnsumer doesn't work. I'm not even able to see any roles that are there in my producer from my consumer.
Can someone tell me why this is happening? Is there anyother configuration that i need to do in extra to this if i'm using an ABAP+Java System?
I've followed http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/9f2d4293825333e10000000a155106/content.htm
this link for my Configuration.
Kindly Help.
Regards
Ak.
PS: Posts will be appropriately rewarded

Hello,
We were able to resolve the issue by removing the proxy settings on both portals. We think it was something in the SPS17 support pack that made these settings obsolete.
On both portals, navigate to System Administration u2192 System Configuration u2192 Service Configuration.
Go to the Portal Catalog, navigate to the com.sap.portal.ivs.httpservice application.
Open the proxy service.
Remove the proxy server property values, as necessary and leave the defaults for Proxy Server.
NOTE: We are using a reverse proxy and we did have to define its settings in the proxy service. But after installing SPS17 we had to remove them and restart both portals. This resolved our FPN issues.
Thank you,
Jim V

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

Can not connect to wireless network any more, missing command

I can not connect to any wireless network. I have been having this problem for days. In desperation I installed 10.4 in a seperate HD. I clicked on the airport icon in the upper tool bar, selected my network name and clicked on "open internet connect" and I was connected, what?? I rebooted into 10.5 and tried the same thing again. But the panel that opens when you click on the airport icon has NO "open internet connect" command. A couple of weeks ago I reinstalled my OS. I have run diskwarrior and Techtool pro. Thinking back to the time I first installed 10.5 I don't remember ever seeing that command. Is Leopard compatible with the airport card? How do I get my "open internet connect" command back??

It sounds like a problem between hardware and software. When you select your network, does anything freeze or does nothing happen?
Nothing happens.
Try this, open your Network Preference Pane, turn off airport off and delete the Airport connection by selecting "Airport" in the left pane and click the " - " button. Click on the "+" sign and create a new Airport connection. Hit Apply if it is available. Turn AirPort on and try to select your network and login if you can. The status should show Connected and an IP address should show up after of a couple of seconds.
I get "AirPort has a self-assigned IP address and may not be able to connect to the Internet". On a couple of occasions (over the last couple days) I got you are connected to the internet on IP 172.17.90.251. However when I tried to open a web page I got the banner you are not connected to the internet. Strange, the pref panet said I was the Safari said I was not. Certainly the IP address does not show up in a few seconds. I also have ComCast cable but I need to use the MetroFi-Free wireless so my wife has the bandwidth to do her company work using VPN.

Ipad can not connect to network

Can not connect to Internet

Does the iPad connect to other networks?
Does the iPad see the network?
Any error messages?
Do other devices now connect?
Did the iPad connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does

my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on

Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9

I've got ipad 4th generation but I can not connect to iTunes .when press video or music it ask me to g iTunes Store when press that the iTunes come up with white page and blue icon saying can connect to iTunes Store .any help please .thanks

I can not connect to iTunes from ipad

This what Apple's iTunes specific error codes support article says about that particular error.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

I can not connect the wi-fi network with my iPad Air

I can not connect the wi-fi network with my iPad Air

Hi there maurobats,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

My imac running lion can not connect to a Windows PC on my network

My imac runing lion 10.7 can not connect to my Windows 7 pc on my network. When i select connect to server, I can see the windows computer but when i try to connect, i get the error message:
Connection failed. There was a problem connecting to the server. Ther server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection and try again.
I entered smb:// computer name and I tried smb://IP address. Neither would connect.
I am able to connect to the imac from my Window PC and access files but not I can not connect my iMac to the Windows PC.
I am trying to connect the two computers so that I can use a printer that is attached to the Windows 7 pc.
When I first downl;oaded and installed Lion, I was able to connect to the Windows 7 pc and use the printer attached to it.
I have tried 5 or 6 different suggestions to no avail. Both computers are up to date and the printer drivers are up to date.
Please let me know if there is a solution.

Be sure to make the network Workgroup name on the Mac and Windows boxes the same.
On the Mac it is in System Preferences, Network Preferences, Advanced, WINS
On the Windows machine check in the Control Panel where you will also find the Computer name listed. I don't have my PC running right now, so I am not sure exactly where it is. Only assign a Workgroup, do not create a Domain.
You can also search in Windows for Workgroup.
I can link/network Lion to Win7 and vice versa without any problems.

When I set up a guest network on my time capsule nothing can not connect to this network

I have an airport time capsule and I set up a guest network on it. This network is visible, but I can not connect to this using my mac, windows lap tops iPhone and samsung galaxy note 4.

Actually the TC is the main router, but the problem is when I put this on NAT DHCP mode
The device that you call your "modem" is very likely a modem/router or gateway type of device that combines both the functions of a modem and router in one package.
The Guest Network feature will only work correctly when the TC connects to a pure modem.....not a modem/router or gateway.
To see if this is really your problem, please post back with the make and model number of the device that you call your "modem" so we can see exactly what you have.

Can not connect to wifi-network

I have a iphone 4 that I managed to lose in the toilet. it is relatively in good condition,but can not connect to wi-fi networks. seems as if it is unable to receive signals. is there anything I can do to fix it?
and I have no dial tone when I call. what can I do?

Apple has an out of warranty replacement program for phone's like yours, cost in the US is $199. That would be your best course of action.

Hello my iphone 3g can not connect to home network via wifi

Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail

Removed a connection from network map, can not find again

I removed a home computer from the network map, intending to block access. While I did achieve that, I am now trying to remove the block and allow the computer to reconnect. There seems to be no way possible to do this. Everywhere I search has told me to simply remove the intruder status from the network map, but the computer I'm trying to unblock does not show up on the map whatsoever. I've reinstalled my router, and that affected nothing. Is there another way to completely revert the router to factory default? Or is there some piece in the software that could fix this that I am not seeing? The computer's OS is Vista-32bit (that can not connect).
Thanks for your help,
Steve.
Message Edited by Steve0189 on 01-08-2010 09:29 AM
Message Edited by Steve0189 on 01-08-2010 09:30 AM

Steve0189 wrote:
I removed a home computer from the network map, intending to block access. While I did achieve that, I am now trying to remove the block and allow the computer to reconnect. There seems to be no way possible to do this. Everywhere I search has told me to simply remove the intruder status from the network map, but the computer I'm trying to unblock does not show up on the map whatsoever. I've reinstalled my router, and that affected nothing. Is there another way to completely revert the router to factory default? Or is there some piece in the software that could fix this that I am not seeing? The computer's OS is Vista-32bit (that can not connect).
Thanks for your help,
Steve.
Message Edited by Steve0189 on 01-08-2010 09:29 AM
Message Edited by Steve0189 on 01-08-2010 09:30 AM
Hi Steve,
Make sure that the Network Lock is off in Network Magic.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Imessage wont connect using my apple id says can not connect check network conection and my network connection is fine what do i do

having trouble with imessage since i updated to the ios7 cant get it to connect to imessage when i use my apple id says can not connect check network connection and my network connection is fine does anyone know what to do to fix this

i have the same problem but i didnt update

Federated Portal Network Blues - can not connect to WSRP producer

Similar Messages

Maybe you are looking for