Federation Service with External Organization is not working

Hi,
Exchange 2010 is running in present environment and recently I have introduced Exchange 2013. There is federation Enabled at Exchange 2010 end with External Exchange organization. When we migrated users from E2k10 to E2k13 Free /Busy sync has stopped working.
Exchange 2k10 & E2k13 in same Exchange organization and no errors found in configuration part and all seems Success.
Here what I am suspecting, something that I need to do at F5 load balancer end, not sure what :( .. I need urgent help from Experts in this forum to help me in case I have missed something to make Federation working. 
Amit

Hi.
Federation in coexistence mode runs through the Exchange 2013.
Coexistence with Exchange 2010
In organizations that contain both Exchange 2010 and Exchange 2013 servers, users who have a mailbox on an Exchange 2010 Mailbox server can use organization relationships to share free/busy information with recipients in external Exchange 2013 federated
domain organizations. The Exchange 2010 Client Access and Mailbox servers must be running SP2 or higher, and you must have at least one Exchange 2013 Client Access server in the Exchange 2010 organization.
Troubleshooting plan
1) Check run correctly Exchange CAS 2010/2013
2) Enabled Outlook logging and checked the logs. For Client from Exchange 2010 and Exchange 2013 mailbox.
3) Ran Test-OrganizationRelationship on Exchange 2010 and Exchange 2013.
4) Checked the Federation settings on Exchange 2013.
5) On Exchange 2013 and 2010 server: Get-FederationTrust | Set-FederationTrust -RefreshMetadata
MCITP, MCSE. Regards, Oleg

Similar Messages

  • Swf with external .as files not working in Captivate

    Hello,
    I am using Flash Professional CS5.5 & Captivate 5.5 (purchased with eLearning suite).
    When I insert swf animations into Captivate that have external .as files they do not work.
    Tried both insert animation & insert animation slide - same results.
    I placed the .as files in the same file as my Captivate project and have tried multiple setting options.
    The FPS are set to 30.
    I had the same problem with external audio files and had to embed the audio into my fla to get it to play in Captivate.
    Does Captivate just not allow external files?
    Any help/insight is appreciated!!
    Les-

    The most likely reason for this failure is that since your SWF is now embedded into another SWF (the Captivate project) the paths to the AS files need to be altered in Flash to allow for this.
    You need to investigate how this would be done in AS code if your Flash SWF was a symbol inside another Flash SWF.

  • When is Apple going to fix the problem with external hard drive not working on Lion?

    As for everyone else external hard drive does not work with Lion.
    When will Apple fix this problem. Do they just ignore the customer : (

    Copy off all your data off the NTFS formatted drive to another drive
    Open Disk Utility in the Applications>Utilities folder
    Select your external NTFS drive on the far left,  should have the drive makers name, a ID perhaps plus the word "media"
    Click the Partition Tab, click the big box and click 1 Partition
    If you want a Mac only drive > Option: GUID >format OS X Extended (Journaled)
    If you want a Mac/PC drive (for over 4GB sized files) > Option: MBR > format exFAT
    If you want a Mac/PC drive (for the most compatibility with other devices, Win XP, but only under 4GB sized files) > Option: MBR > format MSDOS (FAT or FAT32)
    Give it a name and click Apply.
    You can also search Microsoft for a free exFAT download if you have Win XP.
    https://discussions.apple.com/message/16276201#16276201

  • HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this.  I am running windows 8 on parallels.

    Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

    It was working untill i did the update

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • External mouse scrolling not working

    The scrolling function of my external mouse does not work when the MacBook Pro is not plugged in with its powercord. The mouse buttons seem to be functioning.  So does as an external keyboard. My wife has the same problem (using 10.6.2 OS). There are no options in the System Preferences that deal with this. Is this just an oversight by Apple? This basically makes using an external keyboard and mouse a nonviable option for a laptop unless you are near an electric outlet. If you know of a workaround I would appreciate the information. If not, it is something Apple will have to correct as it a pretty obvious oversight.
    Thanks in advance for any advice.
    Tony

    Check your settings when it is unplugged to make sure they are still properly configured.  You might even want to try and disable the trackpad when a mouse is being used.  I would also check out USB Overdrive (Shareware).

  • Mac air with external hard drive - not being found on Finder, Time Machine, Migration Assistant

    I have been using an external drive (Imation Apollo) to access only, old files from previous computer (PC) on a new Mac Air.  I had not transferred them across to new computer (didn't want to do that)  just accessing them from the HD.  It had been working fine until recently.  Each time the external drive had been connected Time Machine would come up and ask if i wanted to use this drive for back ups, and I always chose 'Decide later'.  So, as yetI hadn't as yet configured Time Machine to do back ups.
    Recently I noticed that the extrnal HD was no longer showing up on Finder.  Slight panic as i have 5 or 6 yrs of work saved on that HD
    Further investigations - it's also not showing up either on on Disk Utility, or on Migration Assistant.
    I've done the following: 
    Tried HD in each of different USB ports  - made no difference, HD still not showing up
    Tested different Hubs in each port with HD attached - no difference HD not showing up
    Tried USB flash drives in the USB ports - These are working fine and show up on finder
    Tried the HD on other comptuters (a PC though, don't have access to another mac to do this test)- working fine, the HD is showing up and is accessable
    Interrogated the Console logs to try to see if the act of attaching the HD creates a log entry - couldn't find anything
    Rebooted computer via shut down, power disconnect - no difference
    Reset PRAM - no difference still not showing up
    Reset SMC - no differnce still not showing up
    So I think I have established that all the USB ports are functioning correctly and able to access other external drive devices, using hubs with external powersource is not the issue, identified that the external hard drive is working OK, and it appears that the Mac itself is functioning normally.
    What would be the reason the Mac now does not allow this specific external HD to be identified and accessed.  The only possible things I can think of are
    if I had in fact pressed 'Do not use' when Time Machine asked 'do you want to use this drive for back ups'.  Would that mean that the Mac now totally rejects this HD from being a source of accessible files - I hope not!
    I also think that my husband may have disconnected the hard drive from my computer to access some stuff and he just yanked it out rather than use the safe eject method.  Could this create an issue?  The Hard drive works fine on his PC.
    Why is my Mac Air now rejecting this HD and what can I do to access my historical files now. 
    Any assistance anyone can provide would be very greatly appreciated!
    Thanks
    Anna

    I can't answer why it isn't accessing it, but I have a slightly related issue w my back up drive starting to get noisy.
    Realizing that redundancy is safety for critical data.  I talked to my brother about my situation the other day & he said he has 3 small Western Digital portable HDs that he rotates for backup. He even keeps 1 in the safe deposit box.
    I have read for some time that we should have multiple back ups & also have our critical stuff backed up off site. Amazon HD reviews had a woman telling about how she was very backed up on multiple computers & hard drives, but they were robbed or burgeled & all of them were stolen including her thesis that was on the computers.
    Hard drives aren't that expensive. I just bought a new Western Digital 1 TB drive for $89.99. I plan to use it to back up the Seagate that is getting noisy & then maybe alternate them.
    Also, when I came back to Mac, I moved practially all of my documents to Mac. I think I just dragged & dropped or something. Photos, Office, & pdfs do fine that way. & then you could back them up to a couple of different external drives & remove from your MacBookAir.
    Unfortunately I think most of us do not back up until crisis & then it may be too late.
    Also use Time Machine. For the 1st time in my computer life, my computer is well backed up--although now realizing the need for redundancy so will start backing up to at least 2 different HDs alternatly.
    So, not sure why it isn't working & hopefully you have come up w a solution by now.
    I think what I would do in a situation like this, since you can access it on the Windows machine would be to transfer the data to the Windows machine & then transfer it back to a different back up.
    I'm looking into backing up what I still have in Windows using a thumb flash drive. I think it should all fit ok now that they have the larger drives & I don't have very much left in Windows format.

  • External command is not working in File Receiver Adapter

    Hi,
       I have tried to copy the file which is mentioned in my File Adapter (Receiver) to 3 different folders thru OS command. The purpose is to save time. I have created one CC for Source(File) and one CC for target(File). After the target file is created, I want to copy this file in 3 folders. For this I have written one batch file in my system.
    File Name: copy1.bat
    @ECHO OFF
    COPY %1 C:\TEST1\arch_t1
    COPY %1 C:\TEST2\arch_t2 
    COPY %1 C:\TEST3\arch_t3
    DEL %1
    The command which I entered in the Receiver CC (File Adatper is)
    Run Operating System Command After Message Processing
    Command Line: C:\FILES\copy1.bat %F %f
    Timeout(secs): 60
    Terminate Program After Timeout - Check box is selected.
    But, this external command is not working. (because the target files are not created in those directories C:\TEST1, C:\TEST2, C:\TEST3)
       I did this scenario by refering the Michael'w weblog:
    /people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
       In this blog, he has also given how to troubleshoot external command. I tried this also. It is not working.
        I use Windows XP OS. XI 3.0 SP 18.
       Friends, Could you kindly tell why this external command is not working? What could be the problem?
    Thanks in advance.
    Kind Regards,
    Jeg P.

    Hi, Jeg.
    As the note says, please check the java Runtime.exec behavior
    with the proper user.
    If in doubt, check if the command can be successfully run through
    the Java Runtime.exec(...) API. Also note that the command is run
    as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
    So, Could you check the following(very dirty one!) Java in your
    XI server and check if it works? For simulating %F, create a test
    file C:\FILES\test.txt whatever the content is.
    import java.util.*;
    import java.io.*;
    public class ExecJava {
      public static void main(String args[]) {
        try {           
          Runtime rt = Runtime.getRuntime();
          Process proc = rt.exec("C:/FILES/copy1.bat C:
    FILES
    test.txt");
        } catch (Exception e) {
          e.printStackTrace();
    Good Luck.
    Sejoon

  • XI ALERTS with out BPM Are not working.

    Hi All,
      We are on XI 3.0 sp14. Alerts with out BPM are not working. I want to apply notes 906044, 876546. It says i need to make some changes to the following functions. I could not able to find these Function modules in the first place. Can some one help me out?
    <b>Note -
    Object -
         Name</b>
    906044  -
    function---- SXMS_ALERT_ERROR_RECEIVE
    906044  -
    function --- SXMS_ALERT_ERROR_SEND
    906044&876546--method ---CL_XI_ALERT HAS_ACTIVE_RULE
    906044  -
    method -
      CL_XI_ALERT_UTIL GET_MDT_URL
    905896   -
    method  -
    CL_XI_ALERT CREATE_ALERT
    Thank you
    Ganges Leaves.

    Ganges
    Login into XI Developement and give SE37 Transaction. Then you give SXMS_ALERT_ERROR_RECEIVE and click 'display'.
    Then you check for the methods CL_XI_ALERT HAS_ACTIVE_RULE, CL_XI_ALERT_UTIL GET_MDT_URL, CL_XI_ALERT CREATE_ALERT and make the changes according to service notes. If you dont find this methods in this function then you can try in SXMS_ALERT_ERROR_SEND.
    Regards,
    ---Mohan

  • Converting WordPerfect to PDF with desktop printer tool: Not working

    I have been a monthly subscriber to Adobe CreatePDF for many years! I work mainly with Correl WordPerfect, but with the change to the Pack version it is not supported. I downloaded the desktop printer tool; it is installed. However, when I follow instructions and print, I get nothing. Where does the PDF go? What can I do? Please help! I cannot continue to pay monthly if I don't get service.

    Thank you very much. I have uninstall adobe desktop printer tool and my wordperfect. Next step is follow your suggestions but I am no computer anything, lol. 1. How do I know if I have a win 7 sp1? I have win 7 that much I know. 2. Where can download the hotfix? 3. With adobe createpdf, I didn't need adobe ps printer setup, I don't have a laser printer at home, I have an hp inkjet printer.
    Please help again and soon, :).
    Date: Tue, 7 Jan 2014 11:52:08 -0800
    From: [email protected]
    To: [email protected]
    Subject: Converting WordPerfect to PDF with desktop printer tool: Not working
        Re: Converting WordPerfect to PDF with desktop printer tool: Not working
        created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
    Please do following
    (A). If your system is Win 7 SP1 then install a hot fix to correct inetpp.dll version at C:\Windows\System32 folder.After installing the hot fix version will be 6.1.7601.21819 from 6.1.7601.17514.
    Note please uninstall CreatePDF Desktop printer then reinstall after applying the hot fix
    (B). If you have not installed Adobe Postscript driver yet then please install one as below:
    How to Install PS printer:
    1. Open Start menu > Devices and Printer ( or from control panel) and select "Add a printer"
    2. Select "Add a local printer"
    3. Select "Use an existing port: LPT1: (Printer port)
    4. Select any company and any PS printer with Adobe PS printer driver(not clone) such as Xerox and Xerox Phaser 6120PS
    Adobe PS driver files:
    http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532123/450-202/PagesfromHowToInstall_PS_PrinterDriver_onWin7.jpg
    (C) Go to the printer configure port and verify your Adobe ID and password
    1. Goto Start> Devices and Printers > Adobe CreatePDF Desktop Printer
    2. Click right mouse to open “Printer properties”.
    3. Select “Ports” tab
    4. Select ”Internet Port: Adobe CreatePDF Desktop printer”
    5. Click “Configure Port…” button at the bottom
      http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532115/410-417/IPP_Scr eenshot.png
    When printing to PDF you will see below and an email is delivered to your email inbox.  The converted PDF file will be stored at https//files.acrobat.com.
      http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-5989811-532116/395-199/IPP_Scr eenshot_Queue.png
    Thank you
    Hisami
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5989811#5989811
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5989811#5989811
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5989811#5989811. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Organizer does not work

    Dear all!
    I have Elements 13 since 09/2014 but I did not really work with it. Nevertheless, I cannot open the organizer, because there is always the failure- report
    "Organizer does not work.......bla, bla". Searching for a solution does not bring anything.
    Is this a well known problem? Do you have any solutions?
    Thanks for your feedback in advance!
    Kind regards
    Johnny

    Hi,
    Sadly, there isn't just one cause of this type of failure so you need to do some troubleshooting. It is usually caused by a problem with the catalog especially if it contains videos as well as stills.
    Which operating system you are running on?
    I would first try to repair and optimize your catalog.
    Load the organizer while holding down the shift key - that should open the Catalog Manager.
    Select you current catalog and click on the Repair button
    When that has finished, click on the Optimize button
    When that is done, click on the Cancel button to close the Catalog Manage
    Brian

  • My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

    My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

    Search this site for many reports of problems with GoFlex drives.

  • Audigy Platinum eX External Bay is not work

    So I posted a few days ago with this same problem. My external bay is not working, and not even getting power. I uninstalled my Audigy, removed the card and put it in a different PCI slot. Then I reinstalled it. I also unplugged all cables and then put them back in to make sure they are well attached. Still I have problems, and the external bay is useless and unpowered. Anyone have any ideas?

    LoopyG,
    If you have done all of these steps and you are still not getting any power from the dri've bay then you will probably want to contact Technical Support to arrange repairs. Their contact page is: http://us.creative.com/support/custsup.
    Jeremy

  • Organizer properties not working

    I have Windows 8.1 installed and I am using the test version of Photoshop 12 and Premiere Elements 12.
    Whenever I try to change something in the Properties of the Organizer I get to the message Organizer
    is not working any longer and will be closed. Is this because I am using the test version ??

      After making a search click the show all button - to start a new search.
    Two stars and lower will give you all photos tagged with one and two stars
    To find items which are unrated - click the menu Find à By Details (Metadata)
    Set the criterion to zero.

  • My camera works with the photobooth and with skype but does not work with online applications such as "lolcam from facebook" or "faceonthehole" application. Please help

    My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?

    There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
    So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
    If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
    There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine.

Maybe you are looking for