Fedora via Parallels won't start up

Hi there.. Yesterday I was asking whether I can have linux on my mac... Today my linux is already there, installed on a virtual drive in Parallels tools... but here's the problem: it won't start up.. after (I think successful) booting it says after screen blinking, something like this: "The display server has been shut several times during last 90 seconds....." I've tried everything, rebooting the virtual machine as well as my macbook, changing preferences in parallels like adding up memory and video memory, what's the problem?
thanx everyone

The two things I would try are;
1. Reset the NVRAM, and.
2. reset the SMC.

Similar Messages

  • [Solved] Project64 (which runs via wine) won't start w/ an error

    I'm on 64 bit arch laptop trying to run project64, but the app won't start.  I installed project64 from the repo and it pulled wine as a dependancy.  Upon firsst-run I was prompted to install wine gecko and hit the install button.  This froze and I force-closed the window which then prompted me to select a language.  I got a "Program Error" message saying that pj64 encountered a serious problem and needs to close.  I then found and installed the wine_gecko package, but this didn't solve the problem.
    The console outputs the following:
    wine: Unhandled page fault on read access to 0xffffffff at address 0x7cdb9eda (thread 0009), starting debugger...
    Someone please help me.
    Last edited by vectorman (2011-08-12 22:11:25)

    Make sure you have the correct lib32 drivers for your graphics card, since wine is a 32 bit app. For example,m for nvidia you need the lib32-nvidia-utils package. This seems to be more of a general Wine issue rather than an issue with project64 though, but hopefully installing the correct package should help. I maintain the project64 AUR package though, so I feel like I should do my best to help, and possuibly imporve my package too if something's wrong with it Also, if that doesn't work, try running this, it will give more terminal output that could be useful (by default it uses WINEDEBUG=-all to get rid of the extra debug info and stuff wine outputs by default, but it might be helpful here):
    wine "$HOME"/.project64/Project64.exe
    Also, IMO, all the Mupen64plus frontends seem to be kinda crappy right now (cutemupen crashesd so I can't even try that one out...), but the one I'va had the best luck with is wxmupen64plus-hg, so give that a shot, though it does still have some issues sometimes, but it lets you configure the controllers and stuff, so that's good And if you felt like using it, you could install version 1.5 (it's in AUR too, but I haven't tested it), since version 1.5 has a GUI and it always worked great when I used to use that
    Last edited by doorknob60 (2011-08-12 06:09:19)

  • Fedora won't start via parallels

    Hi there.. Yesterday I was asking whether I can have linux on my mac... Today my linux is already there, installed on a virtual drive in Parallels tools... but here's the problem: it won't start up.. after (I think successful) booting it says after screen blinking, something like this: "The display server has been shut several times during last 90 seconds....." I've tried everything, rebooting the virtual machine as well as my macbook, changing preferences in parallels like adding up memory and video memory, what's the problem?
    thanx everyone

    well yeah i see the booting process, just the moment it wants to switch to the gui it finds out it can't and shows a message like the graphical server has been shut about 6 times in the last 90 seconds,.... i've found some people having the same issue on other linux forums (unfortunately not related to parallels)...
    so i guess that the os is working... I tried installing the latest ubuntu and it has the same problem, now i am trying mandriva, if this one posts the same message again, i don't know what i'm gonna do...
    anyway, don't u know of any non-gui distro? it would be really great to get rid of this issue, i don't need the gui anyway.
    thanx a lot.

  • My laptop won't start up, I want to back it up via firewire, but it is filevault protected. How do I login and turn off vilevault?

    My laptop won't start up, I want to back it up via firewire, but it is filevault protected. How do I login and turn off vilevault? When I connect to another computer via firewire and try to transfer files, finder freezes.

    To use FireWire target disk mode
    Make sure that the target computer is turned off.
    If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
    Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
    Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
    When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
    Press the target computer's power button to turn it off.
    Unplug the FireWire cable.

  • ISight to run in MSN (Windows Vista Business via Parallels)

    Hi guys !
    I'm a MAC newbee and as I need to run some Windows applications I have installed Windows Vista Business via Parallels.
    Everything works just fine - except for the iSight web-cam when running MSN. I have installed the AppleiSight drivers from the Leopard DVD into the Windows Vista and I did get it running once. But since then the iSight won't start if running MSN. The iSight works perfectly in PhotoBoot, iChat and so on, so there's no problem with the actual HW.
    If I try ro re-install the drivers it seems they're already installed, still my MSN doesn't find any cam connected.
    I read somewhere that I might need to make the iSight camera "available" to Windows, but I haven't been able to figure out where that might be - if that is really the case... ??!! So if anyone can point me in the right direction here it would be just awesome...
    THANKS !!!

    I am having trouble getting the isight to work with aMSN messenger. When the video comes up, I can see myself in the screen viewing box, but the person I am messaging cannot. I am aware that MSN is a microsoft program and therefore might not work with apple. aMSN says that my isight is firewalled or blocked by a router and that I need port forwarding. I was wondering if there is any way around this or if anyone knows the numbers involved for the port forwarding?
    "If you are unable to view a webcam in aMSN after a contact has send you an invite, or after you have issued the command to receive/send webcam, and you are behind a router, you may need to follow these steps:
    If you receive: IP-Restrict-NAT and you receive false in webcam wizard, that means your connection is firewalled. (does not send the IP)
    If this is the case, you will need to open some ports for the webcam to use because they are currently blocked.
    To do this, open your router web-based configuration (check router manual for details on this). Once you have the web-based configuration open, browse for a setting called "port forwarding" or "port range forwarding" or something similar to that. (This might be found under the advanced features for your router).
    Now that you have the port forwarding page open, you will want to set the port forwarding range so that aMSN will be able to accept and send the webcam stream.
    Here's an example of how you will set up your port forwarding:
    Application: aMSN
    Start: 6890
    End: 6900
    Protocol: Both(TCP & UDP)
    IP: xxx.xxx.x.xxx
    Enabled: X (Yes/True)
    Note: xxx.xxx.x.xxx is the IP of your machine that you are trying to send / receive webcam
    If you have a web server open on your port 80, you can try to disable it too, sometimes it helps."
    -aMSN

  • Windows 7 Won't Start Up from Boot Camp

    I got a new 21.5" iMac and set up a boot camp partition for a Windows 7 64-bit installation. It worked. I installed the latest boot camp drivers into the Windows 7, which was wonderful because it fixed the display to match my iMac's specs. Then I installed the latest Parallels 5 and had it recognize that Windows 7 system, and have been using it without problem. But I tried this evening to use boot camp to start up the Windows 7 system by itself and although I got a choice of Mac OS or Windows via the option-startup process, and selected the Windows startup, Windows 7 won't start up that way. I just get a black screen with a blinking white horizontal line in the upper-left corner. I keep waiting but it never gets past this. Tried turning it off and starting again, still no luck. Booted back into Mac side and Parallels VM of the installation still works.
    Any help appreciated. I should still be able to boot into Windows 7 straight using boot camp, no?

    I should add that I just installed 8GB of RAM to the 4GB the iMac came with. Possibly now that the total machine has a 12GB of RAM the Windows 7 system is confused and can't start up?

  • X11 won't start anymore!

    Hello,
    this is a desperate call: I am at a conference with my MBP, (10.6.7, all updates done). I need Matlab for my presentation, which needs X11.
    X11 (and XQuartz) decided that they won't start anymore: the icon bounces in the dock for a while, then sits there without the little light underneath, and X11 is "non responding".
    The logs show something like this.
    I have googled and searched: similar problems once in a while appear but no posted solution.
    I tried:
    1) reinstalling XQuartz (I would reinstall X11, but how? I do not have the disks with me, I am away!)
    2) from an admin account
    3) create a new account.
    4) repair permissions.
    5) reinstall the font update from Apple that was recently issued.
    HELP PLEASE!!!
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: DISPLAY ("/tmp/launch-bHvQen/org.macosforge.xquartz:0") does not match our id ("org.x"), unsetting.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: main(): argc=2
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -psn_0_278596
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Waiting for startup parameters via Mach IPC.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Could not connect to server (DISPLAY is not set). Starting X server.
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Launching /usr/X11/bin/startx:
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /bin/sh
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -c
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[2] = /usr/X11/bin/startx
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Scanning user font directories to generate X11 font caches
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Updating FC cache
    11-05-16 5:02:01 PM     org.x.privileged_startx[20781]     font_cache: Scanning system font directories to generate X11 font caches
    11-05-16 5:02:01 PM     defaults[20791]
    The domain/default pair of (org.x.X11, dpi) does not exist
    11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Couldn't create cookie
    11-05-16 5:02:02 PM     org.x.privileged_startx[20781]     font_cache: Updating FC cache
    11-05-16 5:02:04 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Done
    11-05-16 5:02:04 PM     org.x.privileged_startx[20781]     font_cache: Done

    Here is the solution: there was nothing wrong with x11 per se!
    The problem was that about 30 files in /usr/bin (like gzip, egrep, hexdump etc) had been hosed (they had 0 file size).  The puzzling messages was due to the fact that startx uses hexdump, which was simply silently doing nothing (since it had 0 size!).
    I do not know what or when these files were zeroed: I suspect a recent OSX update which did not complete and I had to forcefully reboot.
    I have fixed it enough to work (copying those files from another mac), but who knows what else lurks beneath the surface of apparent serenity!
    I am actually surprised that the whole system did not stop functioning completely.
    MORALE: if something looks strange in the logs with x11 or other apps, check the file sizes  in your /usr/bin, you may be surprised too!

  • Can you run a USB mini projector from a Macbook via Parallels

    I recently purchased one of those cheap Tiawanese mini projectors on ebay (Model MUSB100). It features a mini b plug on one end of its cable and two USB plugs on the other. It's designed for PC use and works fine running XP on a Windows PC with the addition of some very cheap and nasty driver software that comes with it called UVTool.
    What I was hoping to do was run it via Parallels and XP on my Macbook. I installed the software on Parallels and I could get a picture fine but no sound. I have had a little trouble with USB devices plugged into Parallels before, so I thought I'd download the latest version of Parallels hoping to correct the audio bug. Not a good idea. The cheap and nasty driver software causes Parallels to crash and freeze every time and I have to shut down Parallels and restart. So now that driver software is useless.
    I've also tried plugging the two USB leads straight into my Powerbook, but without some sort of Mac driver that can send video out via the USB ports, it won't work.
    So here are my options.
    Find some other video driver software for XP that will run safely in Parallels and send video out via the USB ports. Or,
    Use my mini display port to VGA adapter and somehow find a piece of hardware that will connect the two USB cables from the projector into the VGA adapter on my Macbook. The Projection Resolution is 640 x 480 pixels (VGA).
    Any suggestions? Or even another way of doing it?

    Your best bet is probably to install XP via Boot Camp and then install the driver. Since that gives Windows complete control of the computer, the driver would probably work fine.

  • Zen Nano Plus WON'T START / RECOVERY / RES

    Hello ZNP friends and fellow victims of frustration,
    I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
    I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
    What I do remember is this:
    ) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
    2) I did double click it to call it up.
    3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
    4) I did leave the battery out of the nano plus during this operation.
    5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
    6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
    What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
    Creative should really have a clear set of instructions by now for fixing this problem.
    Good luck!
    Buck

    Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

  • ITunes kept freezing and now it won't start at all

    It all started when I downloaded an iTune U class that contained a lot of videos and chose to download all old episodes. It turned out there so many that it would take 25 hours. I tried to abort the downloads, but apparently that messed something up. 
    First iTunes started up normally, tried to download "83 items" and then started to freeze up after a minute. I had to shut it down via the Task Manager.
    Then it got worse, and now it won't start at all. After I click on the icon to open iTunes (I have Windows 8) the screen turns white, the blue wheel spins and nothing happens. When I hold the cursor over the iTunes icon in the task bar I can see two preview tiles (one for Download and one for iTunes itself), but both are blank (all white) and nothing happens - the blue wheel will spin forever. What do I do?
    I do have the latest version of iTunes. If I uninstall and reinstall iTunes, will that solve the problem? And will the content of my library still be there?  Thanks!

    Hello, J Appleseed. 
    Thank you for visiting Apple Support Communities. 
    You can try an uninstall and reinstall of iTunes to see if that resolves the issue.  Your iTunes library will not be deleted by doing this.  However, this issue could be a result of multiple issues so an uninstall/reinstall may not resolve this.  Below, I have included the best articles that will help you isolate and possibly correct this issue.  Process each step and test the results after each step processed. 
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/ts3125
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    Cheers,
    Jason H. 

  • X11 won't start

    Ever since upgrading to Leper, X11 won't start. If I open the console window, the following is logged repetitively, which looks like an invalid start command that is followed by command line help. Anybody know what I can do to fix this?
    Console output:
    7/16/08 10:14:06 PM org.x.X11[404] X11.app = /usr/X11/X11.app/Contents/MacOS/X11
    7/16/08 10:14:06 PM org.x.X11[404] Unrecognized option: -launchd
    7/16/08 10:14:06 PM org.x.X11[404] use: X [:<display>] [option]
    7/16/08 10:14:06 PM org.x.X11[404] -a # mouse acceleration (pixels)
    7/16/08 10:14:06 PM org.x.X11[404] -ac disable access control restrictions
    7/16/08 10:14:06 PM org.x.X11[404] -audit int set audit trail level
    7/16/08 10:14:06 PM org.x.X11[404] -auth file select authorization file
    7/16/08 10:14:06 PM org.x.X11[404] -br create root window with black background
    7/16/08 10:14:06 PM org.x.X11[404] +bs enable any backing store support
    7/16/08 10:14:06 PM org.x.X11[404] -bs disable any backing store support
    7/16/08 10:14:06 PM org.x.X11[404] -c turns off key-click
    7/16/08 10:14:06 PM org.x.X11[404] c # key-click volume (0-100)
    7/16/08 10:14:06 PM org.x.X11[404] -cc int default color visual class
    7/16/08 10:14:06 PM org.x.X11[404] -co file color database file
    7/16/08 10:14:06 PM org.x.X11[404] -core generate core dump on fatal error
    7/16/08 10:14:06 PM org.x.X11[404] -dpi int screen resolution in dots per inch
    7/16/08 10:14:06 PM org.x.X11[404] dpms enables VESA DPMS monitor control
    7/16/08 10:14:06 PM org.x.X11[404] -dpms disables VESA DPMS monitor control
    7/16/08 10:14:06 PM org.x.X11[404] -deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
    7/16/08 10:14:06 PM org.x.X11[404] -f # bell base (0-100)
    7/16/08 10:14:06 PM org.x.X11[404] -fc string cursor font
    7/16/08 10:14:06 PM org.x.X11[404] -fn string default font name
    7/16/08 10:14:06 PM org.x.X11[404] -fp string default font path
    7/16/08 10:14:06 PM org.x.X11[404] -help prints message with these options
    7/16/08 10:14:06 PM org.x.X11[404] -I ignore all remaining arguments
    7/16/08 10:14:06 PM org.x.X11[404] -ld int limit data space to N Kb
    7/16/08 10:14:06 PM org.x.X11[404] -lf int limit number of open files to N
    7/16/08 10:14:06 PM org.x.X11[404] -ls int limit stack space to N Kb
    7/16/08 10:14:06 PM org.x.X11[404] -nolock disable the locking mechanism
    7/16/08 10:14:06 PM org.x.X11[404] -logo enable logo in screen saver
    7/16/08 10:14:06 PM org.x.X11[404] nologo disable logo in screen saver
    7/16/08 10:14:06 PM org.x.X11[404] -nolisten string don't listen on protocol
    7/16/08 10:14:06 PM org.x.X11[404] -noreset don't reset after last client exists
    7/16/08 10:14:06 PM org.x.X11[404] -reset reset after last client exists
    7/16/08 10:14:06 PM org.x.X11[404] -p # screen-saver pattern duration (minutes)
    7/16/08 10:14:06 PM org.x.X11[404] -pn accept failure to listen on all ports
    7/16/08 10:14:06 PM org.x.X11[404] -nopn reject failure to listen on all ports
    7/16/08 10:14:06 PM org.x.X11[404] -r turns off auto-repeat
    7/16/08 10:14:06 PM org.x.X11[404] r turns on auto-repeat
    7/16/08 10:14:06 PM org.x.X11[404] -render [default|mono|gray|color] set render color alloc policy
    7/16/08 10:14:06 PM org.x.X11[404] -s # screen-saver timeout (minutes)
    7/16/08 10:14:06 PM org.x.X11[404] -sp file security policy file
    7/16/08 10:14:06 PM org.x.X11[404] -su disable any save under support
    7/16/08 10:14:06 PM org.x.X11[404] -t # mouse threshold (pixels)
    7/16/08 10:14:06 PM org.x.X11[404] -terminate terminate at server reset
    7/16/08 10:14:06 PM org.x.X11[404] -to # connection time out
    7/16/08 10:14:06 PM org.x.X11[404] -tst disable testing extensions
    7/16/08 10:14:06 PM org.x.X11[404] ttyxx server started from init on /dev/ttyxx
    7/16/08 10:14:06 PM org.x.X11[404] v video blanking for screen-saver
    7/16/08 10:14:06 PM org.x.X11[404] -v screen-saver without video blanking
    7/16/08 10:14:06 PM org.x.X11[404] -wm WhenMapped default backing-store
    7/16/08 10:14:06 PM org.x.X11[404] -wr create root window with white background
    7/16/08 10:14:06 PM org.x.X11[404] -x string loads named extension at init time
    7/16/08 10:14:06 PM org.x.X11[404] -maxbigreqsize set maximal bigrequest size
    7/16/08 10:14:06 PM org.x.X11[404] +xinerama Enable XINERAMA extension
    7/16/08 10:14:06 PM org.x.X11[404] -xinerama Disable XINERAMA extension
    7/16/08 10:14:06 PM org.x.X11[404] -dumbSched Disable smart scheduling, enable old behavior
    7/16/08 10:14:06 PM org.x.X11[404] -schedInterval int Set scheduler interval in msec
    7/16/08 10:14:06 PM org.x.X11[404] +extension name Enable extension
    7/16/08 10:14:06 PM org.x.X11[404] -extension name Disable extension
    7/16/08 10:14:06 PM org.x.X11[404] -query host-name contact named host for XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -broadcast broadcast for XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -multicast [addr [hops]] IPv6 multicast for XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -indirect host-name contact named host for indirect XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -port port-num UDP port number to send messages to
    7/16/08 10:14:06 PM org.x.X11[404] -from local-address specify the local address to connect from
    7/16/08 10:14:06 PM org.x.X11[404] -once Terminate server after one session
    7/16/08 10:14:06 PM org.x.X11[404] -class display-class specify display class to send in manage
    7/16/08 10:14:06 PM org.x.X11[404] -cookie xdm-auth-bits specify the magic cookie for XDMCP
    7/16/08 10:14:06 PM org.x.X11[404] -displayID display-id manufacturer display ID for request
    7/16/08 10:14:06 PM org.x.X11[404] -kb disable the X Keyboard Extension
    7/16/08 10:14:06 PM org.x.X11[404] +kb enable the X Keyboard Extension
    7/16/08 10:14:06 PM org.x.X11[404] [+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
    7/16/08 10:14:06 PM org.x.X11[404] enable/disable accessx key sequences
    7/16/08 10:14:06 PM org.x.X11[404] -ardelay set XKB autorepeat delay
    7/16/08 10:14:06 PM org.x.X11[404] -arinterval set XKB autorepeat interval
    7/16/08 10:14:06 PM org.x.X11[404] Device Dependent Usage:
    7/16/08 10:14:06 PM org.x.X11[404] -fakebuttons : fake a three button mouse with Command and Option keys.
    7/16/08 10:14:06 PM org.x.X11[404] -nofakebuttons : don't fake a three button mouse.
    7/16/08 10:14:06 PM org.x.X11[404] -fakemouse2 <modifiers> : fake middle mouse button with modifier keys.
    7/16/08 10:14:06 PM org.x.X11[404] -fakemouse3 <modifiers> : fake right mouse button with modifier keys.
    7/16/08 10:14:06 PM org.x.X11[404] ex: -fakemouse2 "option,shift" = option-shift-click is middle button.
    7/16/08 10:14:06 PM org.x.X11[404] -keymap <file> : read the keymapping from a file instead of the kernel.
    7/16/08 10:14:06 PM org.x.X11[404] -version : show the server version.
    7/16/08 10:14:06 PM org.x.X11[404] Quartz modes:
    7/16/08 10:14:06 PM org.x.X11[404] -fullscreen : run full screen in parallel with Mac OS X window server.
    7/16/08 10:14:06 PM org.x.X11[404] -rootless : run rootless inside Mac OS X window server.
    7/16/08 10:14:06 PM org.x.X11[404] -quartz : use default Mac OS X window server mode
    7/16/08 10:14:06 PM org.x.X11[404] Options ignored in rootless mode:
    7/16/08 10:14:06 PM org.x.X11[404] -size <height> <width> : use a screen resolution of <height> x <width>.
    7/16/08 10:14:06 PM org.x.X11[404] -depth <8,15,24> : use this bit depth.
    7/16/08 10:14:06 PM org.x.X11[404] -refresh <rate> : use a monitor refresh rate of <rate> Hz.
    7/16/08 10:14:06 PM org.x.X11[404] Fatal server error:
    7/16/08 10:14:06 PM org.x.X11[404] Unrecognized option: -launchd
    7/16/08 10:14:06 PM org.x.X11[404] AbortDDX
    7/16/08 10:14:06 PM org.x.X11[404] Quitting Xquartz...
    7/16/08 10:14:18 PM com.apple.launchd[101] (org.x.X11[404]) Exited with exit code: 1

    I too am having this problem. People are all reporting different causes.
    The cause might be solved by this solution at MacOSXHints.com
    http://www.macosxhints.com/article.php?story=20080622105055862
    They sugguest removing the -launchd boot option from your Xorg plist file. I did this and it did not fix the problem for me, I still get the Unrecognized option: -launchd. But other users have reported success, so it's worth a shot.
    You might also look into what the guys in this thread (http://discussions.apple.com/thread.jspa?threadID=1402209&tstart=205) did to try to solve launching problems.

  • [SOLVED] RStudio won't start

    I've tried to install latest RStudio with yaourt -S rstudio-desktop-bin
    $ sudo pacman -Q rstudio-desktop-bin
    rstudio-desktop-bin 0.98.1103-1
    The installation worked without any issues, but the problem is that RStudio simply won't start. When I try to run it via KDE5's kickoff, it shows for a few seconds in the task manager, but then without any prompt or error, it simply disappears from there.
    I don't know how to run it with Konsole for some potential error output:
    $ rstudio
    bash: rstudio: command not found
    $ rstudio-desktop-bin
    bash: rstudio-desktop-bin: command not found
    Last edited by JonnyRobbie (2015-05-04 01:01:37)

    Yep, pretty much exactly the same output:
    $ file /usr/lib/rstudio/bin/rstudio
    /usr/lib/rstudio/bin/rstudio: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.15, BuildID[sha1]=dc879dc63116a0dc7f0d877f3525bdfea9ace076, stripped
    The strace stderr is quite long this is the result of $ strace rstudio-bin 2> ~/Documents/strace_rstudio.log:
    execve("/usr/bin/rstudio-bin", ["rstudio-bin"], [/* 64 vars */]) = 0
    brk(0) = 0x1483000
    readlink("/proc/self/exe", "/usr/lib/rstudio/bin/rstudio", 4096) = 28
    access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
    open("/usr/lib/rstudio/bin/tls/x86_64/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/rstudio/bin/tls/x86_64", 0x7ffe83ffb890) = -1 ENOENT (No such file or directory)
    open("/usr/lib/rstudio/bin/tls/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/rstudio/bin/tls", 0x7ffe83ffb890) = -1 ENOENT (No such file or directory)
    open("/usr/lib/rstudio/bin/x86_64/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/rstudio/bin/x86_64", 0x7ffe83ffb890) = -1 ENOENT (No such file or directory)
    open("/usr/lib/rstudio/bin/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    stat("/usr/lib/rstudio/bin", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
    open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=245656, ...}) = 0
    mmap(NULL, 245656, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f0385b00000
    close(3) = 0
    open("/usr/lib/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\7>\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=35918296, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385aff000
    mmap(NULL, 38192608, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f03834ae000
    mprotect(0x7f0385544000, 2097152, PROT_NONE) = 0
    mmap(0x7f0385744000, 1748992, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2096000) = 0x7f0385744000
    mmap(0x7f03858ef000, 177632, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f03858ef000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libQtXmlPatterns.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libQtXmlPatterns.so.4", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\313\t\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=4543552, ...}) = 0
    mmap(NULL, 6645208, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0382e57000
    mprotect(0x7f038326c000, 2097152, PROT_NONE) = 0
    mmap(0x7f038346c000, 262144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x415000) = 0x7f038346c000
    mmap(0x7f03834ac000, 5592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f03834ac000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libQtGui.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libQtGui.so.4", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360O\33\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=11462888, ...}) = 0
    mmap(NULL, 13571752, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0382165000
    mprotect(0x7f0382c09000, 2097152, PROT_NONE) = 0
    mmap(0x7f0382e09000, 307200, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xaa4000) = 0x7f0382e09000
    mmap(0x7f0382e54000, 9896, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f0382e54000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libQtDBus.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libQtDBus.so.4", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20A\1\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=513144, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afe000
    mmap(NULL, 2608792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381ee8000
    mprotect(0x7f0381f63000, 2093056, PROT_NONE) = 0
    mmap(0x7f0382162000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7a000) = 0x7f0382162000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libQtXml.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libQtXml.so.4", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\4\1\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=289792, ...}) = 0
    mmap(NULL, 2384872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381ca1000
    mprotect(0x7f0381ce4000, 2097152, PROT_NONE) = 0
    mmap(0x7f0381ee4000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x43000) = 0x7f0381ee4000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libQtNetwork.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libQtNetwork.so.4", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340E\3\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1351200, ...}) = 0
    mmap(NULL, 3447088, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381957000
    mprotect(0x7f0381a99000, 2093056, PROT_NONE) = 0
    mmap(0x7f0381c98000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x141000) = 0x7f0381c98000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libQtCore.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libQtCore.so.4", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\3603\7\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=3078232, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afd000
    mmap(NULL, 5176680, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381467000
    mprotect(0x7f038174a000, 2097152, PROT_NONE) = 0
    mmap(0x7f038194a000, 49152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2e3000) = 0x7f038194a000
    mmap(0x7f0381956000, 3432, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f0381956000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libpthread.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340`\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=142912, ...}) = 0
    mmap(NULL, 2213136, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f038124a000
    mprotect(0x7f0381262000, 2093056, PROT_NONE) = 0
    mmap(0x7f0381461000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f0381461000
    mmap(0x7f0381463000, 13584, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f0381463000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libutil.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libutil.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\16\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=10616, ...}) = 0
    mmap(NULL, 2105624, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381047000
    mprotect(0x7f0381049000, 2093056, PROT_NONE) = 0
    mmap(0x7f0381248000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7f0381248000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libuuid.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libuuid.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\26\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=19120, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afc000
    mmap(NULL, 2113952, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380e42000
    mprotect(0x7f0380e46000, 2093056, PROT_NONE) = 0
    mmap(0x7f0381045000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f0381045000
    close(3) = 0
    open("/usr/lib/rstudio/bin/librt.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/librt.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220!\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=31688, ...}) = 0
    mmap(NULL, 2128856, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380c3a000
    mprotect(0x7f0380c41000, 2093056, PROT_NONE) = 0
    mmap(0x7f0380e40000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f0380e40000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libz.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000#\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=88592, ...}) = 0
    mmap(NULL, 2183688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380a24000
    mprotect(0x7f0380a39000, 2093056, PROT_NONE) = 0
    mmap(0x7f0380c38000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7f0380c38000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20\271\5\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1486936, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afb000
    mmap(NULL, 3204768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380715000
    mprotect(0x7f0380805000, 2097152, PROT_NONE) = 0
    mmap(0x7f0380a05000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf0000) = 0x7f0380a05000
    mmap(0x7f0380a0f000, 83616, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f0380a0f000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20U\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1067384, ...}) = 0
    mmap(NULL, 3162456, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380410000
    mprotect(0x7f0380513000, 2097152, PROT_NONE) = 0
    mmap(0x7f0380713000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x103000) = 0x7f0380713000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260*\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=544920, ...}) = 0
    mmap(NULL, 2186016, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f03801fa000
    mprotect(0x7f0380210000, 2093056, PROT_NONE) = 0
    mmap(0x7f038040f000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f038040f000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \t\2\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1984880, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afa000
    mmap(NULL, 3813008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037fe57000
    mprotect(0x7f037fff0000, 2097152, PROT_NONE) = 0
    mmap(0x7f03801f0000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x199000) = 0x7f03801f0000
    mmap(0x7f03801f6000, 16016, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f03801f6000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libXrender.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libXrender.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\34\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=39488, ...}) = 0
    mmap(NULL, 2134760, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037fc4d000
    mprotect(0x7f037fc56000, 2093056, PROT_NONE) = 0
    mmap(0x7f037fe55000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x7f037fe55000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libjpeg.so.8", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libjpeg.so.8", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340?\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=367288, ...}) = 0
    mmap(NULL, 2462360, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f9f3000
    mprotect(0x7f037fa4a000, 2097152, PROT_NONE) = 0
    mmap(0x7f037fc4a000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x57000) = 0x7f037fc4a000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libpng16.so.16", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libpng16.so.16", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p^\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=220288, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385af9000
    mmap(NULL, 2315456, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f7bd000
    mprotect(0x7f037f7f2000, 2093056, PROT_NONE) = 0
    mmap(0x7f037f9f1000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x34000) = 0x7f037f9f1000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libudev.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=81992, ...}) = 0
    mmap(NULL, 85520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0385ae4000
    mmap(0x7f0385af7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12000) = 0x7f0385af7000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgstapp-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgstapp-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 1\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=52288, ...}) = 0
    mmap(NULL, 2147600, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f5b0000
    mprotect(0x7f037f5bc000, 2093056, PROT_NONE) = 0
    mmap(0x7f037f7bb000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xb000) = 0x7f037f7bb000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgstpbutils-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgstpbutils-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\262\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=163920, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ae3000
    mmap(NULL, 2259512, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f388000
    mprotect(0x7f037f3ad000, 2097152, PROT_NONE) = 0
    mmap(0x7f037f5ad000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f037f5ad000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgstvideo-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgstvideo-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\340\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=312456, ...}) = 0
    mmap(NULL, 2408664, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f13b000
    mprotect(0x7f037f181000, 2097152, PROT_NONE) = 0
    mmap(0x7f037f381000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x46000) = 0x7f037f381000
    mmap(0x7f037f387000, 216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037f387000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgstaudio-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgstaudio-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\306\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=323544, ...}) = 0
    mmap(NULL, 2419808, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037eeec000
    mprotect(0x7f037ef38000, 2093056, PROT_NONE) = 0
    mmap(0x7f037f137000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4b000) = 0x7f037f137000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgstbase-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgstbase-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\313\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=389832, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ae2000
    mmap(NULL, 2485336, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037ec8d000
    mprotect(0x7f037ecea000, 2097152, PROT_NONE) = 0
    mmap(0x7f037eeea000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5d000) = 0x7f037eeea000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgstreamer-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgstreamer-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\206\2\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1111808, ...}) = 0
    mmap(NULL, 3213384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037e97c000
    mprotect(0x7f037ea84000, 2093056, PROT_NONE) = 0
    mmap(0x7f037ec83000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x107000) = 0x7f037ec83000
    mmap(0x7f037ec8b000, 6216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037ec8b000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgobject-2.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgobject-2.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \264\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=330848, ...}) = 0
    mmap(NULL, 2428872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037e72b000
    mprotect(0x7f037e77a000, 2097152, PROT_NONE) = 0
    mmap(0x7f037e97a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4f000) = 0x7f037e97a000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libglib-2.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libglib-2.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\246\1\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1102960, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ae1000
    mmap(NULL, 3200680, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037e41d000
    mprotect(0x7f037e529000, 2093056, PROT_NONE) = 0
    mmap(0x7f037e728000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b000) = 0x7f037e728000
    mmap(0x7f037e72a000, 1704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037e72a000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libsqlite3.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libsqlite3.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\272\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=822232, ...}) = 0
    mmap(NULL, 2919160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037e154000
    mprotect(0x7f037e218000, 2093056, PROT_NONE) = 0
    mmap(0x7f037e417000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc3000) = 0x7f037e417000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libfontconfig.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libfontconfig.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240p\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=273840, ...}) = 0
    mmap(NULL, 2369736, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037df11000
    mprotect(0x7f037df4e000, 2093056, PROT_NONE) = 0
    mmap(0x7f037e14d000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3c000) = 0x7f037e14d000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libQtOpenGL.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libQtOpenGL.so.4", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@\211\2\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1052032, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ae0000
    mmap(NULL, 3151096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037dc0f000
    mprotect(0x7f037dd07000, 2097152, PROT_NONE) = 0
    mmap(0x7f037df07000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf8000) = 0x7f037df07000
    mmap(0x7f037df10000, 1272, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037df10000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libGL.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libGL.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\200\5\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1267736, ...}) = 0
    mmap(NULL, 3455960, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037d8c3000
    mprotect(0x7f037d9d5000, 2093056, PROT_NONE) = 0
    mmap(0x7f037dbd4000, 151552, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x111000) = 0x7f037dbd4000
    mmap(0x7f037dbf9000, 89048, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037dbf9000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libX11.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libX11.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300\335\1\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=1314936, ...}) = 0
    mmap(NULL, 3412192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037d581000
    mprotect(0x7f037d6bc000, 2093056, PROT_NONE) = 0
    mmap(0x7f037d8bb000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13a000) = 0x7f037d8bb000
    mmap(0x7f037d8c2000, 224, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037d8c2000
    close(3) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385adf000
    open("/usr/lib/rstudio/bin/libfreetype.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libfreetype.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\4\1\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=813856, ...}) = 0
    mmap(NULL, 2909640, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037d2ba000
    mprotect(0x7f037d377000, 2097152, PROT_NONE) = 0
    mmap(0x7f037d577000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xbd000) = 0x7f037d577000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libSM.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libSM.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\34\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=30920, ...}) = 0
    mmap(NULL, 2126192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037d0b2000
    mprotect(0x7f037d0b9000, 2093056, PROT_NONE) = 0
    mmap(0x7f037d2b8000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f037d2b8000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libICE.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libICE.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`Q\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=102568, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ade000
    mmap(NULL, 2212384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037ce95000
    mprotect(0x7f037cead000, 2093056, PROT_NONE) = 0
    mmap(0x7f037d0ac000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f037d0ac000
    mmap(0x7f037d0ae000, 12832, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037d0ae000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libXext.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libXext.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p9\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=73688, ...}) = 0
    mmap(NULL, 2169560, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037cc83000
    mprotect(0x7f037cc94000, 2093056, PROT_NONE) = 0
    mmap(0x7f037ce93000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10000) = 0x7f037ce93000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libdbus-1.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libdbus-1.so.3", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 }\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=298880, ...}) = 0
    mmap(NULL, 2394616, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037ca3a000
    mprotect(0x7f037ca81000, 2097152, PROT_NONE) = 0
    mmap(0x7f037cc81000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x47000) = 0x7f037cc81000
    close(3) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385add000
    open("/usr/lib/rstudio/bin/libssl.so.1.0.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libssl.so.1.0.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\255\1\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0555, st_size=557824, ...}) = 0
    mmap(NULL, 2599152, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037c7bf000
    mprotect(0x7f037c82e000, 2093056, PROT_NONE) = 0
    mmap(0x7f037ca2d000, 53248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6e000) = 0x7f037ca2d000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libcrypto.so.1.0.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libcrypto.so.1.0.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0z\6\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0555, st_size=2873968, ...}) = 0
    mmap(NULL, 4699520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037c343000
    mprotect(0x7f037c591000, 2093056, PROT_NONE) = 0
    mmap(0x7f037c790000, 176128, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24d000) = 0x7f037c790000
    mmap(0x7f037c7bb000, 13696, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037c7bb000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libdl.so.2", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\16\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=14600, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385adc000
    mmap(NULL, 2109712, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037c13f000
    mprotect(0x7f037c141000, 2097152, PROT_NONE) = 0
    mmap(0x7f037c341000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f037c341000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libcap.so.2", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\25\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0644, st_size=17320, ...}) = 0
    mmap(NULL, 2112568, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037bf3b000
    mprotect(0x7f037bf3f000, 2093056, PROT_NONE) = 0
    mmap(0x7f037c13e000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f037c13e000
    close(3) = 0
    open("/usr/lib/rstudio/bin/liborc-0.4.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/liborc-0.4.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\263\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=545864, ...}) = 0
    mmap(NULL, 2641544, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037bcb6000
    mprotect(0x7f037bd36000, 2093056, PROT_NONE) = 0
    mmap(0x7f037bf35000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7f000) = 0x7f037bf35000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgsttag-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgsttag-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\235\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=233984, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385adb000
    mmap(NULL, 2329400, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037ba7d000
    mprotect(0x7f037bab4000, 2093056, PROT_NONE) = 0
    mmap(0x7f037bcb3000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x36000) = 0x7f037bcb3000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgmodule-2.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgmodule-2.0.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\21\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=14608, ...}) = 0
    mmap(NULL, 2109880, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037b879000
    mprotect(0x7f037b87c000, 2093056, PROT_NONE) = 0
    mmap(0x7f037ba7b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f037ba7b000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libffi.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libffi.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\33\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=35216, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ada000
    mmap(NULL, 2131688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037b670000
    mprotect(0x7f037b678000, 2093056, PROT_NONE) = 0
    mmap(0x7f037b877000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x7f037b877000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libpcre.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libpcre.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\27\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=452840, ...}) = 0
    mmap(NULL, 2548328, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037b401000
    mprotect(0x7f037b46f000, 2093056, PROT_NONE) = 0
    mmap(0x7f037b66e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6d000) = 0x7f037b66e000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libexpat.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libexpat.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`?\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=170144, ...}) = 0
    mmap(NULL, 2265320, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037b1d7000
    mprotect(0x7f037b1fe000, 2093056, PROT_NONE) = 0
    mmap(0x7f037b3fd000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x26000) = 0x7f037b3fd000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libnvidia-tls.so.340.76", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libnvidia-tls.so.340.76", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\t\0\0\0\0\0\0"..., 832) = 832
    lseek(3, 10704, SEEK_SET) = 10704
    read(3, "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\3\0\0\0c\0\0\0", 32) = 32
    fstat(3, {st_mode=S_IFREG|0755, st_size=12976, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad9000
    mmap(NULL, 2109248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037afd4000
    mprotect(0x7f037afd7000, 2093056, PROT_NONE) = 0
    mmap(0x7f037b1d6000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f037b1d6000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libnvidia-glcore.so.340.76", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libnvidia-glcore.so.340.76", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340c\255\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=44003064, ...}) = 0
    mmap(NULL, 46218368, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f03783c0000
    mprotect(0x7f037a21e000, 2093056, PROT_NONE) = 0
    mmap(0x7f037a41d000, 12165120, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e5d000) = 0x7f037a41d000
    mmap(0x7f037afb7000, 117888, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037afb7000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libxcb.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libxcb.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@\244\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=137968, ...}) = 0
    mmap(NULL, 2233352, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037819e000
    mprotect(0x7f03781bf000, 2093056, PROT_NONE) = 0
    mmap(0x7f03783be000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x20000) = 0x7f03783be000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libbz2.so.1.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libbz2.so.1.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\27\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=65760, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad8000
    mmap(NULL, 2160936, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377f8e000
    mprotect(0x7f0377f9d000, 2093056, PROT_NONE) = 0
    mmap(0x7f037819c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x7f037819c000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libharfbuzz.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libharfbuzz.so.0", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@u\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=380544, ...}) = 0
    mmap(NULL, 2476944, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377d31000
    mprotect(0x7f0377d8b000, 2093056, PROT_NONE) = 0
    mmap(0x7f0377f8a000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x59000) = 0x7f0377f8a000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libattr.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libattr.so.1", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\24\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=18736, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad7000
    mmap(NULL, 2113912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377b2c000
    mprotect(0x7f0377b30000, 2093056, PROT_NONE) = 0
    mmap(0x7f0377d2f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f0377d2f000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libXau.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libXau.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \17\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=14512, ...}) = 0
    mmap(NULL, 2109744, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377928000
    mprotect(0x7f037792a000, 2097152, PROT_NONE) = 0
    mmap(0x7f0377b2a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f0377b2a000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libXdmcp.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libXdmcp.so.6", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \25\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=22688, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad6000
    mmap(NULL, 2117912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377722000
    mprotect(0x7f0377727000, 2093056, PROT_NONE) = 0
    mmap(0x7f0377926000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f0377926000
    close(3) = 0
    open("/usr/lib/rstudio/bin/libgraphite2.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
    open("/usr/lib/libgraphite2.so.3", O_RDONLY|O_CLOEXEC) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260(\0\0\0\0\0\0"..., 832) = 832
    fstat(3, {st_mode=S_IFREG|0755, st_size=121184, ...}) = 0
    mmap(NULL, 2216376, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377504000
    mprotect(0x7f0377520000, 2093056, PROT_NONE) = 0
    mmap(0x7f037771f000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b000) = 0x7f037771f000
    close(3) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad5000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad4000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad3000
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad2000
    mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad0000
    arch_prctl(ARCH_SET_FS, 0x7f0385ad07c0) = 0
    mprotect(0x7f03801f0000, 16384, PROT_READ) = 0
    mprotect(0x7f037771f000, 8192, PROT_READ) = 0
    mprotect(0x7f0377926000, 4096, PROT_READ) = 0
    mprotect(0x7f0377b2a000, 4096, PROT_READ) = 0
    mprotect(0x7f0377d2f000, 4096, PROT_READ) = 0
    mprotect(0x7f0381461000, 4096, PROT_READ) = 0
    mprotect(0x7f037b66e000, 4096, PROT_READ) = 0
    mprotect(0x7f037e728000, 4096, PROT_READ) = 0
    mprotect(0x7f0380c38000, 4096, PROT_READ) = 0
    mprotect(0x7f0380713000, 4096, PROT_READ) = 0
    mprotect(0x7f037f9f1000, 4096, PROT_READ) = 0
    mprotect(0x7f037d577000, 24576, PROT_READ) = 0
    mprotect(0x7f0377f8a000, 12288, PROT_READ) = 0
    mprotect(0x7f03783be000, 4096, PROT_READ) = 0
    mprotect(0x7f037c341000, 4096, PROT_READ) = 0
    mprotect(0x7f037b3fd000, 12288, PROT_READ) = 0
    mprotect(0x7f037b877000, 4096, PROT_READ) = 0
    mprotect(0x7f037ba7b000, 4096, PROT_READ) = 0
    mprotect(0x7f037e97a000, 4096, PROT_READ) = 0
    mprotect(0x7f037ec83000, 24576, PROT_READ) = 0
    mprotect(0x7f037eeea000, 4096, PROT_READ) = 0
    mprotect(0x7f037bcb3000, 8192, PROT_READ) = 0
    mprotect(0x7f0380e40000, 4096, PROT_READ) = 0
    mprotect(0x7f037bf35000, 8192, PROT_READ) = 0
    mprotect(0x7f037c790000, 126976, PROT_READ) = 0
    mprotect(0x7f037ca2d000, 24576, PROT_READ) = 0
    mprotect(0x7f037cc81000, 4096, PROT_READ) = 0
    mprotect(0x7f037d8bb000, 8192, PROT_READ) = 0
    mprotect(0x7f037ce93000, 4096, PROT_READ) = 0
    mprotect(0x7f037d0ac000, 4096, PROT_READ) = 0
    mprotect(0x7f0381045000, 4096, PROT_READ) = 0
    mprotect(0x7f037d2b8000, 4096, PROT_READ) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385acf000
    mprotect(0x7f0380a05000, 32768, PROT_READ) = 0
    mprotect(0x7f038194a000, 45056, PROT_READ) = 0
    mprotect(0x7f037fe55000, 4096, PROT_READ) = 0
    mprotect(0x7f037e14d000, 8192, PROT_READ) = 0
    mprotect(0x7f0382e09000, 274432, PROT_READ) = 0
    mprotect(0x7f037df07000, 16384, PROT_READ) = 0
    mprotect(0x7f037e417000, 12288, PROT_READ) = 0
    mprotect(0x7f037f137000, 8192, PROT_READ) = 0
    mprotect(0x7f037f381000, 8192, PROT_READ) = 0
    mprotect(0x7f037f5ad000, 8192, PROT_READ) = 0
    mprotect(0x7f037f7bb000, 4096, PROT_READ) = 0
    mprotect(0x7f0385af7000, 4096, PROT_READ) = 0
    mprotect(0x7f037fc4a000, 8192, PROT_READ) = 0
    mprotect(0x7f0381248000, 4096, PROT_READ) = 0
    mprotect(0x7f0381c98000, 28672, PROT_READ) = 0
    mprotect(0x7f0381ee4000, 12288, PROT_READ) = 0
    mprotect(0x7f0382162000, 8192, PROT_READ) = 0
    mprotect(0x7f038346c000, 258048, PROT_READ) = 0
    mprotect(0x7f0385744000, 1642496, PROT_READ) = 0
    mprotect(0xade000, 73728, PROT_READ) = 0
    mprotect(0x7f0385b3c000, 4096, PROT_READ) = 0
    munmap(0x7f0385b00000, 245656) = 0
    set_tid_address(0x7f0385ad0a90) = 3390
    set_robust_list(0x7f0385ad0aa0, 24) = 0
    rt_sigaction(SIGRTMIN, {0x7f038124fbb0, [], SA_RESTORER|SA_SIGINFO, 0x7f038125a740}, NULL, 8) = 0
    rt_sigaction(SIGRT_1, {0x7f038124fc40, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7f038125a740}, NULL, 8) = 0
    rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
    getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
    brk(0) = 0x1483000
    brk(0x14a4000) = 0x14a4000
    futex(0x7f037e72a568, FUTEX_WAKE_PRIVATE, 2147483647) = 0
    futex(0x7f037e72a568, FUTEX_WAKE_PRIVATE, 2147483647) = 0
    futex(0x7f037c3420c8, FUTEX_WAKE_PRIVATE, 2147483647) = 0
    open("/proc/self/maps", O_RDONLY) = 3
    lseek(3, 0, SEEK_SET) = 0
    read(3, "00400000-008df000 r-xp 00000000 "..., 4096) = 4031
    read(3, "7f037b3fd000-7f037b400000 r--p 0"..., 4096) = 4090
    read(3, "7f037cc82000-7f037cc83000 rw-p 0"..., 4096) = 4049
    read(3, "7f037e728000-7f037e729000 r--p 0"..., 4096) = 4017
    read(3, "7f037fc4a000-7f037fc4c000 r--p 0"..., 4096) = 4019
    read(3, "7f0381462000-7f0381463000 rw-p 0"..., 4096) = 4022
    read(3, "7ffe841c3000-7ffe841c5000 r--p 0"..., 4096) = 244
    read(3, "", 4096) = 0
    close(3) = 0
    brk(0x14d3000) = 0x14d3000
    brk(0x14c5000) = 0x14c5000
    mmap(NULL, 200704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385b0b000
    brk(0x14b5000) = 0x14b5000
    mremap(0x7f0385b0b000, 200704, 204800, MREMAP_MAYMOVE) = 0x7f0385a9d000
    mremap(0x7f0385a9d000, 204800, 208896, MREMAP_MAYMOVE) = 0x7f0385b09000
    mremap(0x7f0385b09000, 208896, 212992, MREMAP_MAYMOVE) = 0x7f0385a9b000
    mremap(0x7f0385a9b000, 212992, 217088, MREMAP_MAYMOVE) = 0x7f0385b07000
    mremap(0x7f0385b07000, 217088, 221184, MREMAP_MAYMOVE) = 0x7f0385a99000
    mremap(0x7f0385a99000, 221184, 225280, MREMAP_MAYMOVE) = 0x7f0385b05000
    mremap(0x7f0385b05000, 225280, 229376, MREMAP_MAYMOVE) = 0x7f0385a97000
    mremap(0x7f0385a97000, 229376, 233472, MREMAP_MAYMOVE) = 0x7f0385b03000
    mremap(0x7f0385b03000, 233472, 237568, MREMAP_MAYMOVE) = 0x7f0385a95000
    mremap(0x7f0385a95000, 237568, 241664, MREMAP_MAYMOVE) = 0x7f0385b01000
    mremap(0x7f0385b01000, 241664, 245760, MREMAP_MAYMOVE) = 0x7f0385a93000
    mremap(0x7f0385a93000, 245760, 249856, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 249856, 253952, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 253952, 258048, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 258048, 262144, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 262144, 266240, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 266240, 270336, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 270336, 274432, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 274432, 278528, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 278528, 282624, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 282624, 286720, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 286720, 290816, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 290816, 294912, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 294912, 299008, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 299008, 303104, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 303104, 307200, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 307200, 311296, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 311296, 315392, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 315392, 319488, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 319488, 323584, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 323584, 327680, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 327680, 331776, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 331776, 335872, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 335872, 339968, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 339968, 344064, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 344064, 348160, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 348160, 356352, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 356352, 360448, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 360448, 364544, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 364544, 368640, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 368640, 372736, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 372736, 376832, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 376832, 380928, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 380928, 385024, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 385024, 389120, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 389120, 393216, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 393216, 397312, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 397312, 401408, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 401408, 405504, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 405504, 409600, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 409600, 413696, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 413696, 417792, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 417792, 421888, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 421888, 425984, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 425984, 430080, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 430080, 434176, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 434176, 438272, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 438272, 442368, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 442368, 446464, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 446464, 450560, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 450560, 454656, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 454656, 458752, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 458752, 462848, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 462848, 466944, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 466944, 471040, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 471040, 475136, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 475136, 479232, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 479232, 483328, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 483328, 487424, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 487424, 491520, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 491520, 495616, MREMAP_MAYMOVE) = 0x7f0385a56000
    mremap(0x7f0385a56000, 495616, 499712, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 499712, 503808, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 503808, 507904, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 507904, 512000, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 512000, 516096, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 516096, 520192, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 520192, 524288, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 524288, 528384, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 528384, 532480, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 532480, 536576, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 536576, 540672, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 540672, 544768, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 544768, 548864, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 548864, 552960, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 552960, 557056, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 557056, 561152, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 561152, 565248, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 565248, 569344, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 569344, 573440, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 573440, 577536, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 577536, 581632, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 581632, 585728, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 585728, 589824, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 589824, 593920, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 593920, 598016, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 598016, 602112, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 602112, 606208, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 606208, 610304, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 610304, 614400, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 614400, 618496, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 618496, 622592, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 622592, 626688, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 626688, 630784, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 630784, 634880, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 634880, 638976, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 638976, 643072, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 643072, 647168, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 647168, 651264, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 651264, 655360, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 655360, 659456, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 659456, 663552, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 663552, 667648, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 667648, 671744, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 671744, 675840, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 675840, 679936, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 679936, 684032, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 684032, 688128, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 688128, 692224, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 692224, 696320, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 696320, 700416, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 700416, 704512, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 704512, 712704, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 712704, 716800, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 716800, 720896, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 720896, 724992, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 724992, 729088, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 729088, 733184, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 733184, 737280, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 737280, 741376, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 741376, 745472, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 745472, 749568, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 749568, 753664, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 753664, 757760, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 757760, 761856, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 761856, 765952, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 765952, 770048, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 770048, 774144, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 774144, 778240, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 778240, 782336, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 782336, 786432, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 786432, 790528, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 790528, 794624, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 794624, 798720, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 798720, 802816, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 802816, 806912, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 806912, 811008, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 811008, 815104, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 815104, 819200, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 819200, 823296, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 823296, 827392, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 827392, 831488, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 831488, 835584, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 835584, 839680, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 839680, 843776, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 843776, 847872, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 847872, 851968, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 851968, 856064, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 856064, 860160, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 860160, 864256, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 864256, 868352, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 868352, 872448, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 872448, 876544, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 876544, 880640, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 880640, 884736, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 884736, 888832, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 888832, 892928, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 892928, 897024, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 897024, 901120, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 901120, 905216, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 905216, 909312, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 909312, 913408, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 913408, 917504, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 917504, 921600, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 921600, 925696, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 925696, 929792, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 929792, 933888, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 933888, 937984, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 937984, 942080, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 942080, 946176, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 946176, 950272, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 950272, 954368, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 954368, 958464, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 958464, 962560, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 962560, 966656, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 966656, 970752, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 970752, 974848, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 974848, 978944, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 978944, 983040, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 983040, 987136, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 987136, 991232, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 991232, 995328, MREMAP_MAYMOVE) = 0x7f03859dc000
    mremap(0x7f03859dc000, 995328, 999424, MREMAP_MAYMOVE) = 0x7f0377410000
    mremap(0x7f0377410000, 999424, 1003520, MREMAP_MAYMOVE) = 0x7f03859da000
    mremap(0x7f03859da000, 1003520, 1007616, MREMAP_MAYMOVE) = 0x7f037740e000
    mremap(0x7f037740e000, 1007616, 1011712, MREMAP_MAYMOVE) = 0x7f03859d8000
    mremap(0x7f03859d8000, 1011712, 1015808, MREMAP_MAYMOVE) = 0x7f037740c000
    mremap(0x7f037740c000, 1015808, 1019904, MREMAP_MAYMOVE) = 0x7f03859d6000
    mremap(0x7f03859d6000, 1019904, 1024000, MREMAP_MAYMOVE) = 0x7f037740a000
    mremap(0x7f037740a000, 1024000, 1028096, MREMAP_MAYMOVE) = 0x7f03859d4000
    mremap(0x7f03859d4000, 1028096, 1032192, MREMAP_MAYMOVE) = 0x7f0377408000
    mremap(0x7f0377408000, 1032192, 1036288, MREMAP_MAYMOVE) = 0x7f03859d2000
    mremap(0x7f03859d2000, 1036288, 1040384, MREMAP_MAYMOVE) = 0x7f0377406000
    mremap(0x7f0377406000, 1040384, 1044480, MREMAP_MAYMOVE) = 0x7f03859d0000
    brk(0x14ae000) = 0x14ae000
    munmap(0x7f03859d0000, 1044480) = 0
    open("/home/marek/.nv/nvidia-application-profile-globals-rc", O_RDONLY) = -1 ENOENT (No such file or directory)
    clock_gettime(CLOCK_MONOTONIC, {16537, 376573135}) = 0
    clock_gettime(CLOCK_MONOTONIC, {16537, 376610151}) = 0
    open("/home/marek/.nv/nvidia-application-profiles-rc", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/home/marek/.nv/nvidia-application-profiles-rc.d", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/etc/nvidia/nvidia-application-profiles-rc", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/etc/nvidia/nvidia-application-profiles-rc.d/", O_RDONLY) = -1 ENOENT (No such file or directory)
    open("/usr/share/nvidia/nvidia-application-profiles-340.76-rc", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0644, st_size=3527, ...}) = 0
    fstat(3, {st_mode=S_IFREG|0644, st_size=3527, ...}) = 0
    mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385b3b000
    read(3, "# Application profiles for the N"..., 4096) = 3527
    close(3) = 0
    munmap(0x7f0385b3b000, 4096) = 0
    open("/usr/share/nvidia/nvidia-application-profiles-rc", O_RDONLY) = -1 ENOENT (No such file or directory)
    readlink("/proc/3390/exe", "/usr/lib/rstudio/bin/rstudio", 4095) = 28
    open("/proc/self/maps", O_RDONLY) = 3
    lseek(3, 0, SEEK_SET) = 0
    read(3, "00400000-008df000 r-xp 00000000 "..., 4096) = 4031
    read(3, "7f037b3fd000-7f037b400000 r--p 0"..., 4096) = 4090
    read(3, "7f037cc82000-7f037cc83000 rw-p 0"..., 4096) = 4049
    read(3, "7f037e728000-7f037e729000 r--p 0"..., 4096) = 4017
    read(3, "7f037fc4a000-7f037fc4c000 r--p 0"..., 4096) = 4019
    read(3, "7f0381462000-7f0381463000 rw-p 0"..., 4096) = 4022
    read(3, "7ffe841c3000-7ffe841c5000 r--p 0"..., 4096) = 244
    read(3, "", 4096) = 0
    close(3) = 0
    brk(0x14d9000) = 0x14d9000
    brk(0x152e000) = 0x152e000
    brk(0x15d8000) = 0x15d8000
    open("/proc/self/exe", O_RDONLY) = 3
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\2\0>\0\1\0\0\0\360=W\0\0\0\0\0"..., 64) = 64
    lseek(3, 0, SEEK_END) = 5182568
    lseek(3, 64, SEEK_SET) = 64
    read(3, "\6\0\0\0\5\0\0\0@\0\0\0\0\0\0\0@\0@\0\0\0\0\0@\0@\0\0\0\0\0"..., 504) = 504
    lseek(3, 5180648, SEEK_SET) = 5180648
    read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1920) = 1920
    lseek(3, 5180381, SEEK_SET) = 5180381
    read(3, "\0.shstrtab\0.interp\0.note.ABI-tag"..., 260) = 260
    close(3) = 0
    open("/usr/lib/libQtWebKit.so.4.10.4", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0755, st_size=35918296, ...}) = 0
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\7>\0\0\0\0\0"..., 64) = 64
    lseek(3, 0, SEEK_END) = 35918296
    lseek(3, 64, SEEK_SET) = 64
    read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
    lseek(3, 35916504, SEEK_SET) = 35916504
    read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1792) = 1792
    lseek(3, 35916243, SEEK_SET) = 35916243
    read(3, "\0.shstrtab\0.note.gnu.build-id\0.g"..., 257) = 257
    close(3) = 0
    open("/usr/lib/libQtXmlPatterns.so.4.8.6", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0755, st_size=4543552, ...}) = 0
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\313\t\0\0\0\0\0"..., 64) = 64
    lseek(3, 0, SEEK_END) = 4543552
    lseek(3, 64, SEEK_SET) = 64
    read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
    lseek(3, 4541760, SEEK_SET) = 4541760
    read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1792) = 1792
    lseek(3, 4541499, SEEK_SET) = 4541499
    read(3, "\0.shstrtab\0.note.gnu.build-id\0.g"..., 257) = 257
    close(3) = 0
    open("/usr/lib/libQtGui.so.4.8.6", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0755, st_size=11462888, ...}) = 0
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360O\33\0\0\0\0\0"..., 64) = 64
    lseek(3, 0, SEEK_END) = 11462888
    lseek(3, 64, SEEK_SET) = 64
    read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
    lseek(3, 11461096, SEEK_SET) = 11461096
    read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1792) = 1792
    lseek(3, 11460839, SEEK_SET) = 11460839
    read(3, "\0.shstrtab\0.note.gnu.build-id\0.g"..., 257) = 257
    close(3) = 0
    open("/usr/lib/libQtDBus.so.4.8.6", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0755, st_size=513144, ...}) = 0
    read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20A\1\0\0\0\0\0"..., 64) = 64
    lseek(3, 0, SEEK_END) = 513144
    lseek(3, 64, SEEK_SET) = 64
    read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
    lseek(3, 511352, SEEK_SET) = 511352
    read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1792) = 1792
    lseek(3, 511091, SEEK_SET) = 511091
    read(3, "\0.shstrtab\0.note.gnu.build-id\0.g"..., 257) = 257
    close(3) = 0
    open("/usr/lib/libQtXml.so.4.8.6", O_RDONLY) = 3
    fstat(3, {st_mode=S_IFREG|0755, st_size=289792, ...}) = 0
    read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\4\1\0\0\0\0\0"..., 64) = 64
    lseek(3, 0, SEEK_END) = 289792
    lseek(3, 64, SEEK_SET) = 64
    read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
    lseek(3, 288000, SEEK_SET) = 288000
    r

  • X11 won't start (sets monitor to standby) with nVidia card

    Hello everyone!
    I'm having some trouble getting my computer to work properly. Yesterday it was working perfectly, but today it would't start again. After some troubleshooting I've determined that the problem lies with X11 and the graphics driver. The bootloader, grub, and arch itself, boots perfectly in runlevel 3, but the moment you run "startx" it would appear to be loading for a while and finally the screen goes to standby mode and there is no way out of that other than reseting the computer using the reset button. I've tried uninstalling the nvidia drivers and installing nouveau drivers, but it still won't start X, this time arround, it would just hang up with a white screen.
    I've also tried removing xorg.conf and also using nvidia utility to generate a new one, but neither seems to work.
    /var/log/Xorg.0.log doesn't report any errors, it just gives different info from the configuration and the graphics card and just ends there.
    I've tried booting with a debian live USB but it would't boot either (the computer would just restart). I've also tried a Kubuntu live USB, this time arround, it would start to boot but the graphics appeared to be corrupted (strange colored noise all over the screen) and eventually it would just hang up. Using nomodeset Kubuntu finally booted (using vesa I guess?), but the same didn't work in Arch (I'm guessing because I have the nvidia drivers installed instead of nouveau).
    In conclussion, something appears to be wrong with the graphics card, I dont't know if it's a software problem or a hardware problem, as it started from one day to the other, without any upgrades in between, and it just doesn't work in any of the 3 distributions I've tested.
    Any suggestions in what to do to troubleshoot this?
    Thanks in advance,
    Santiago.-

    Xorg.0.log
    [ 35.560]
    X.Org X Server 1.14.4
    Release Date: 2013-10-31
    [ 35.560] X Protocol Version 11, Revision 0
    [ 35.560] Build Operating System: Linux 3.11.6-1-ARCH x86_64
    [ 35.561] Current Operating System: Linux arch 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
    [ 35.561] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    [ 35.562] Build Date: 01 November 2013 05:10:48PM
    [ 35.562]
    [ 35.562] Current version of pixman: 0.30.2
    [ 35.562] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 35.562] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 35.564] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 4 21:35:07 2013
    [ 35.576] (==) Using config file: "/etc/X11/xorg.conf"
    [ 35.576] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 35.577] (==) ServerLayout "Layout0"
    [ 35.577] (**) |-->Screen "Screen0" (0)
    [ 35.577] (**) | |-->Monitor "Monitor0"
    [ 35.577] (**) | |-->Device "Device0"
    [ 35.577] (**) |-->Input Device "Keyboard0"
    [ 35.577] (**) |-->Input Device "Mouse0"
    [ 35.577] (==) Automatically adding devices
    [ 35.577] (==) Automatically enabling devices
    [ 35.577] (==) Automatically adding GPU devices
    [ 35.603] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 35.603] Entry deleted from font path.
    [ 35.603] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 35.603] Entry deleted from font path.
    [ 35.603] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 35.603] Entry deleted from font path.
    [ 35.603] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 35.604] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 35.604] Entry deleted from font path.
    [ 35.604] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 35.604] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 35.604] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 35.604] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 35.604] (WW) Disabling Keyboard0
    [ 35.604] (WW) Disabling Mouse0
    [ 35.604] (II) Loader magic: 0x7fdc20
    [ 35.604] (II) Module ABI versions:
    [ 35.604] X.Org ANSI C Emulation: 0.4
    [ 35.604] X.Org Video Driver: 14.1
    [ 35.604] X.Org XInput driver : 19.1
    [ 35.604] X.Org Server Extension : 7.0
    [ 35.604] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 35.605] (--) PCI:*(0:1:0:0) 10de:0421:1682:2353 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
    [ 35.606] Initializing built-in extension Generic Event Extension
    [ 35.606] Initializing built-in extension SHAPE
    [ 35.606] Initializing built-in extension MIT-SHM
    [ 35.606] Initializing built-in extension XInputExtension
    [ 35.606] Initializing built-in extension XTEST
    [ 35.607] Initializing built-in extension BIG-REQUESTS
    [ 35.607] Initializing built-in extension SYNC
    [ 35.607] Initializing built-in extension XKEYBOARD
    [ 35.607] Initializing built-in extension XC-MISC
    [ 35.608] Initializing built-in extension SECURITY
    [ 35.608] Initializing built-in extension XINERAMA
    [ 35.608] Initializing built-in extension XFIXES
    [ 35.608] Initializing built-in extension RENDER
    [ 35.608] Initializing built-in extension RANDR
    [ 35.609] Initializing built-in extension COMPOSITE
    [ 35.609] Initializing built-in extension DAMAGE
    [ 35.609] Initializing built-in extension MIT-SCREEN-SAVER
    [ 35.609] Initializing built-in extension DOUBLE-BUFFER
    [ 35.619] Initializing built-in extension RECORD
    [ 35.629] Initializing built-in extension DPMS
    [ 35.638] Initializing built-in extension X-Resource
    [ 35.647] Initializing built-in extension XVideo
    [ 35.656] Initializing built-in extension XVideo-MotionCompensation
    [ 35.665] Initializing built-in extension XFree86-VidModeExtension
    [ 35.673] Initializing built-in extension XFree86-DGA
    [ 35.682] Initializing built-in extension XFree86-DRI
    [ 35.690] Initializing built-in extension DRI2
    [ 35.690] (II) LoadModule: "glx"
    [ 35.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 36.111] (II) Module glx: vendor="NVIDIA Corporation"
    [ 36.111] compiled for 4.0.2, module version = 1.0.0
    [ 36.111] Module class: X.Org Server Extension
    [ 36.111] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
    [ 36.126] Loading extension GLX
    [ 36.126] (II) LoadModule: "nvidia"
    [ 36.136] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 36.195] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 36.195] compiled for 4.0.2, module version = 1.0.0
    [ 36.195] Module class: X.Org Video Driver
    [ 36.197] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
    [ 36.197] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 36.197] (--) using VT number 2
    [ 36.248] (II) Loading sub module "fb"
    [ 36.248] (II) LoadModule: "fb"
    [ 36.259] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 36.270] (II) Module fb: vendor="X.Org Foundation"
    [ 36.270] compiled for 1.14.4, module version = 1.0.0
    [ 36.270] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.270] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 36.270] (II) Loading sub module "wfb"
    [ 36.270] (II) LoadModule: "wfb"
    [ 36.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 36.271] (II) Module wfb: vendor="X.Org Foundation"
    [ 36.271] compiled for 1.14.4, module version = 1.0.0
    [ 36.271] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.271] (II) Loading sub module "shadow"
    [ 36.271] (II) LoadModule: "shadow"
    [ 36.271] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 36.272] (II) Module shadow: vendor="X.Org Foundation"
    [ 36.272] compiled for 1.14.4, module version = 1.1.0
    [ 36.272] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 36.272] (II) Loading sub module "ramdac"
    [ 36.272] (II) LoadModule: "ramdac"
    [ 36.272] (II) Module "ramdac" already built-in
    [ 36.274] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 36.274] (==) NVIDIA(0): RGB weight 888
    [ 36.274] (==) NVIDIA(0): Default visual is TrueColor
    [ 36.274] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 36.274] (**) NVIDIA(0): Option "UseEdidDpi" "False"
    [ 36.274] (**) NVIDIA(0): Option "DPI" "96 x 96"
    [ 36.274] (**) NVIDIA(0): Enabling 2D acceleration
    [ 50.151] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 50.256] (II) NVIDIA(GPU-0): Display (Samsung SMB2330H (CRT-0)) does not support NVIDIA 3D
    [ 50.256] (II) NVIDIA(GPU-0): Vision stereo.
    [ 50.256] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
    [ 50.256] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 50.256] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.85
    [ 50.256] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    journalctl -xb
    -- Logs begin at Sat 2013-08-17 21:55:41 ART, end at Mon 2013-11-04 22:01:35 ART. --
    Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 364.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
    Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 368.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuset
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpu
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuacct
    Nov 04 21:59:09 arch kernel: Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
    Nov 04 21:59:09 arch kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    Nov 04 21:59:09 arch kernel: e820: BIOS-provided physical RAM map:
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007fbb4fff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbb5000-0x000000007fbf7fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbf8000-0x000000007fd4bfff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd4c000-0x000000007fd51fff] ACPI data
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd52000-0x000000007fd52fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd53000-0x000000007fd54fff] ACPI data
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd55000-0x000000007fd56fff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd57000-0x000000007fd57fff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd58000-0x000000007fd5bfff] ACPI NVS
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd5c000-0x000000007fd6afff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd6b000-0x000000007fefffff] usable
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffbfffff] reserved
    Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
    Nov 04 21:59:09 arch kernel: NX (Execute Disable) protection: active
    Nov 04 21:59:09 arch kernel: SMBIOS 2.4 present.
    Nov 04 21:59:09 arch kernel: DMI: /DG31PR, BIOS PRG3110H.86A.0071.2010.0318.1704 03/18/2010
    Nov 04 21:59:09 arch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Nov 04 21:59:09 arch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Nov 04 21:59:09 arch kernel: No AGP bridge found
    Nov 04 21:59:09 arch kernel: e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    Nov 04 21:59:09 arch kernel: MTRR default type: uncachable
    Nov 04 21:59:09 arch kernel: MTRR fixed ranges enabled:
    Nov 04 21:59:09 arch kernel: 00000-9FFFF write-back
    Nov 04 21:59:09 arch kernel: A0000-E7FFF uncachable
    Nov 04 21:59:09 arch kernel: E8000-FFFFF write-protect
    Nov 04 21:59:09 arch kernel: MTRR variable ranges enabled:
    Nov 04 21:59:09 arch kernel: 0 base 000000000 mask F80000000 write-back
    Nov 04 21:59:09 arch kernel: 1 base 07FF00000 mask FFFF00000 uncachable
    Nov 04 21:59:09 arch kernel: 2 disabled
    Nov 04 21:59:09 arch kernel: 3 disabled
    Nov 04 21:59:09 arch kernel: 4 disabled
    Nov 04 21:59:09 arch kernel: 5 disabled
    Nov 04 21:59:09 arch kernel: 6 disabled
    Nov 04 21:59:09 arch kernel: 7 disabled
    Nov 04 21:59:09 arch kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Nov 04 21:59:09 arch kernel: found SMP MP-table at [mem 0x000fc620-0x000fc62f] mapped at [ffff8800000fc620]
    Nov 04 21:59:09 arch kernel: Scanning 1 areas for low memory corruption
    Nov 04 21:59:09 arch kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x00000000-0x000fffff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    Nov 04 21:59:09 arch kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
    Nov 04 21:59:09 arch kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7f800000-0x7f9fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7f800000-0x7f9fffff] page 2M
    Nov 04 21:59:09 arch kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7c000000-0x7f7fffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7c000000-0x7f7fffff] page 2M
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
    Nov 04 21:59:09 arch kernel: [mem 0x00100000-0x001fffff] page 4k
    Nov 04 21:59:09 arch kernel: [mem 0x00200000-0x7bffffff] page 2M
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fa00000-0x7fbb4fff]
    Nov 04 21:59:09 arch kernel: [mem 0x7fa00000-0x7fbb4fff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
    Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fd6b000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: [mem 0x7fd6b000-0x7fefffff] page 4k
    Nov 04 21:59:09 arch kernel: BRK [0x01b34000, 0x01b34fff] PGTABLE
    Nov 04 21:59:09 arch kernel: RAMDISK: [mem 0x37a14000-0x37d01fff]
    Nov 04 21:59:09 arch kernel: ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL)
    Nov 04 21:59:09 arch kernel: ACPI: XSDT 000000007fd53f10 00044 (v01 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI: FACP 000000007fd51d90 000F4 (v04 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
    Nov 04 21:59:09 arch kernel: ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0x7FD56F40/0x000000007FD52F40, using 32 (20130517/tbfadt-522)
    Nov 04 21:59:09 arch kernel: ACPI: DSDT 000000007fd4c010 04BE9 (v01 INTEL DG31PR 00000000 INTL 20051117)
    Nov 04 21:59:09 arch kernel: ACPI: FACS 000000007fd56f40 00040
    Nov 04 21:59:09 arch kernel: ACPI: APIC 000000007fd51f10 0006C (v02 INTEL DG31PR 06222004 MSFT 00010013)
    Nov 04 21:59:09 arch kernel: ACPI: HPET 000000007fd5ad10 00038 (v01 INTEL ICH7HPET 06222004 AMI. 00000001)
    Nov 04 21:59:09 arch kernel: ACPI: MCFG 000000007fd5ac10 0003C (v01 INTEL DG31PR 06222004 MSFT 00000097)
    Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
    Nov 04 21:59:09 arch kernel: No NUMA configuration found
    Nov 04 21:59:09 arch kernel: Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    Nov 04 21:59:09 arch kernel: Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: NODE_DATA [mem 0x7fefb000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0
    Nov 04 21:59:09 arch kernel: Zone ranges:
    Nov 04 21:59:09 arch kernel: DMA [mem 0x00001000-0x00ffffff]
    Nov 04 21:59:09 arch kernel: DMA32 [mem 0x01000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: Normal empty
    Nov 04 21:59:09 arch kernel: Movable zone start for each node
    Nov 04 21:59:09 arch kernel: Early memory node ranges
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x00001000-0x0009efff]
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x00100000-0x7fbb4fff]
    Nov 04 21:59:09 arch kernel: node 0: [mem 0x7fd6b000-0x7fefffff]
    Nov 04 21:59:09 arch kernel: On node 0 totalpages: 523496
    Nov 04 21:59:09 arch kernel: DMA zone: 64 pages used for memmap
    Nov 04 21:59:09 arch kernel: DMA zone: 21 pages reserved
    Nov 04 21:59:09 arch kernel: DMA zone: 3998 pages, LIFO batch:0
    Nov 04 21:59:09 arch kernel: DMA32 zone: 8124 pages used for memmap
    Nov 04 21:59:09 arch kernel: DMA32 zone: 519498 pages, LIFO batch:31
    Nov 04 21:59:09 arch kernel: ACPI: PM-Timer IO Port: 0x408
    Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Nov 04 21:59:09 arch kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    Nov 04 21:59:09 arch kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Nov 04 21:59:09 arch kernel: ACPI: IRQ0 used by override.
    Nov 04 21:59:09 arch kernel: ACPI: IRQ2 used by override.
    Nov 04 21:59:09 arch kernel: ACPI: IRQ9 used by override.
    Nov 04 21:59:09 arch kernel: Using ACPI (MADT) for SMP configuration information
    Nov 04 21:59:09 arch kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Nov 04 21:59:09 arch kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    Nov 04 21:59:09 arch kernel: nr_irqs_gsi: 40
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbb5000-0x7fbf7fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbf8000-0x7fd4bfff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd4c000-0x7fd51fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd52000-0x7fd52fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd53000-0x7fd54fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd55000-0x7fd56fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd57000-0x7fd57fff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd58000-0x7fd5bfff]
    Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd5c000-0x7fd6afff]
    Nov 04 21:59:09 arch kernel: e820: [mem 0x7ff00000-0xfed1bfff] available for PCI devices
    Nov 04 21:59:09 arch kernel: Booting paravirtualized kernel on bare hardware
    Nov 04 21:59:09 arch kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    Nov 04 21:59:09 arch kernel: PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86528 r8192 d24064 u524288
    Nov 04 21:59:09 arch kernel: pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
    Nov 04 21:59:09 arch kernel: pcpu-alloc: [0] 0 1 2 3
    Nov 04 21:59:09 arch kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 515287
    Nov 04 21:59:09 arch kernel: Policy zone: DMA32
    Nov 04 21:59:09 arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
    Nov 04 21:59:09 arch kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: Checking aperture...
    Nov 04 21:59:09 arch kernel: No AGP bridge found
    Nov 04 21:59:09 arch kernel: Calgary: detecting Calgary via BIOS EBDA area
    Nov 04 21:59:09 arch kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Nov 04 21:59:09 arch kernel: Memory: 2045916K/2093984K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 48068K reserved)
    Nov 04 21:59:09 arch kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    Nov 04 21:59:09 arch kernel: Preemptible hierarchical RCU implementation.
    Nov 04 21:59:09 arch kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Nov 04 21:59:09 arch kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Nov 04 21:59:09 arch kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    Nov 04 21:59:09 arch kernel: NR_IRQS:8448 nr_irqs:712 16
    Nov 04 21:59:09 arch kernel: Console: colour dummy device 80x25
    Nov 04 21:59:09 arch kernel: console [tty0] enabled
    Nov 04 21:59:09 arch kernel: allocated 8388608 bytes of page_cgroup
    Nov 04 21:59:09 arch kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Nov 04 21:59:09 arch kernel: hpet clockevent registered
    Nov 04 21:59:09 arch kernel: tsc: Fast TSC calibration using PIT
    Nov 04 21:59:09 arch kernel: tsc: Detected 2399.803 MHz processor
    Nov 04 21:59:09 arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.58 BogoMIPS (lpj=7999343)
    Nov 04 21:59:09 arch kernel: pid_max: default: 32768 minimum: 301
    Nov 04 21:59:09 arch kernel: Security Framework initialized
    Nov 04 21:59:09 arch kernel: AppArmor: AppArmor disabled by boot time parameter
    Nov 04 21:59:09 arch kernel: Yama: becoming mindful.
    Nov 04 21:59:09 arch kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Nov 04 21:59:09 arch kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Nov 04 21:59:09 arch kernel: Mount-cache hash table entries: 256
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys memory
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys devices
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys freezer
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys net_cls
    Nov 04 21:59:09 arch kernel: Initializing cgroup subsys blkio
    Nov 04 21:59:09 arch kernel: CPU: Physical Processor ID: 0
    Nov 04 21:59:09 arch kernel: CPU: Processor Core ID: 0
    Nov 04 21:59:09 arch kernel: mce: CPU supports 6 MCE banks
    Nov 04 21:59:09 arch kernel: CPU0: Thermal monitoring enabled (TM2)
    Nov 04 21:59:09 arch kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    Nov 04 21:59:09 arch kernel: Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
    Nov 04 21:59:09 arch kernel: ACPI: Core revision 20130517
    Nov 04 21:59:09 arch kernel: ACPI: All ACPI Tables successfully acquired
    Nov 04 21:59:09 arch kernel: ftrace: allocating 20100 entries in 79 pages
    Nov 04 21:59:09 arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Nov 04 21:59:09 arch kernel: smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
    Nov 04 21:59:09 arch kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    Nov 04 21:59:09 arch kernel: perf_event_intel: PEBS disabled due to CPU errata
    Nov 04 21:59:09 arch kernel: ... version: 2
    Nov 04 21:59:09 arch kernel: ... bit width: 40
    Nov 04 21:59:09 arch kernel: ... generic registers: 2
    Nov 04 21:59:09 arch kernel: ... value mask: 000000ffffffffff
    Nov 04 21:59:09 arch kernel: ... max period: 000000007fffffff
    Nov 04 21:59:09 arch kernel: ... fixed-purpose events: 3
    Nov 04 21:59:09 arch kernel: ... event mask: 0000000700000003
    Nov 04 21:59:09 arch kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Nov 04 21:59:09 arch kernel: smpboot: Booting Node 0, Processors #1 #2 #3 OK
    Nov 04 21:59:09 arch kernel: Brought up 4 CPUs
    Nov 04 21:59:09 arch kernel: smpboot: Total of 4 processors activated (19206.35 BogoMIPS)
    Nov 04 21:59:09 arch kernel: devtmpfs: initialized
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fbb5000-0x7fbf7fff] (274432 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd52000-0x7fd52fff] (4096 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd55000-0x7fd56fff] (8192 bytes)
    Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd58000-0x7fd5bfff] (16384 bytes)
    Nov 04 21:59:09 arch kernel: RTC time: 0:59:05, date: 11/05/13
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 16
    Nov 04 21:59:09 arch kernel: ACPI: bus type PCI registered
    Nov 04 21:59:09 arch kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
    Nov 04 21:59:09 arch kernel: PCI: not using MMCONFIG
    Nov 04 21:59:09 arch kernel: PCI: Using configuration type 1 for base access
    Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
    Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Nov 04 21:59:09 arch kernel: mtrr: probably your BIOS does not setup all CPUs.
    Nov 04 21:59:09 arch kernel: mtrr: corrected configuration.
    Nov 04 21:59:09 arch kernel: bio: create slab <bio-0> at 0
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Module Device)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Device)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Nov 04 21:59:09 arch kernel: ACPI: EC: Look up EC in DSDT
    Nov 04 21:59:09 arch kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Nov 04 21:59:09 arch kernel: ACPI: SSDT 000000007fd56c10 002CC (v01 AMI IST 00000001 MSFT 03000001)
    Nov 04 21:59:09 arch kernel: ACPI: Dynamic OEM Table Load:
    Nov 04 21:59:09 arch kernel: ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001)
    Nov 04 21:59:09 arch kernel: ACPI: Interpreter enabled
    Nov 04 21:59:09 arch kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    Nov 04 21:59:09 arch kernel: ACPI: (supports S0 S1 S3 S4 S5)
    Nov 04 21:59:09 arch kernel: ACPI: Using IOAPIC for interrupt routing
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe40fffff] reserved in ACPI motherboard resources
    Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) (size reduced!)
    Nov 04 21:59:09 arch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Nov 04 21:59:09 arch kernel: ACPI: No dock devices found.
    Nov 04 21:59:09 arch kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Nov 04 21:59:09 arch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
    Nov 04 21:59:09 arch kernel: PCI host bridge to bus 0000:00
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfb204000-0xfb2043ff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 00ff)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x10: [io 0xf130-0xf137]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x14: [io 0xf120-0xf123]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x18: [io 0xf110-0xf117]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x1c: [io 0xf100-0xf103]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x18: [mem 0xfb120000-0xfb120fff 64bit]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x30: [mem 0xfb100000-0xfb11ffff pref]
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: supports D1 D2
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    Nov 04 21:59:09 arch kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
    Nov 04 21:59:09 arch kernel: ACPI: \_SB_.PCI0: notify handler is installed
    Nov 04 21:59:09 arch kernel: Found 1 acpi root devices
    Nov 04 21:59:09 arch kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Nov 04 21:59:09 arch kernel: vgaarb: loaded
    Nov 04 21:59:09 arch kernel: vgaarb: bridge control possible 0000:01:00.0
    Nov 04 21:59:09 arch kernel: PCI: Using ACPI for IRQ routing
    Nov 04 21:59:09 arch kernel: PCI: pci_cache_line_size set to 64 bytes
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7fbb5000-0x7fffffff]
    Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    Nov 04 21:59:09 arch kernel: NetLabel: Initializing
    Nov 04 21:59:09 arch kernel: NetLabel: domain hash size = 128
    Nov 04 21:59:09 arch kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Nov 04 21:59:09 arch kernel: NetLabel: unlabeled traffic allowed by default
    Nov 04 21:59:09 arch kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Nov 04 21:59:09 arch kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Nov 04 21:59:09 arch kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Nov 04 21:59:09 arch kernel: Switched to clocksource hpet
    Nov 04 21:59:09 arch kernel: pnp: PnP ACPI init
    Nov 04 21:59:09 arch kernel: ACPI: bus type PNP registered
    Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0400-0x047f] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x1180-0x119f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0500-0x053f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffb00000-0xffcfffff] could not be reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfc800000-0xfc800fff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed20000-0xfed7ffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    Nov 04 21:59:09 arch kernel: system 00:02: [io 0x0290-0x029f] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:04: [dma 2]
    Nov 04 21:59:09 arch kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:05: [dma 0 disabled]
    Nov 04 21:59:09 arch kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:06: [dma 4]
    Nov 04 21:59:09 arch kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
    Nov 04 21:59:09 arch kernel: system 00:09: [io 0x04d0-0x04d1] has been reserved
    Nov 04 21:59:09 arch kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
    Nov 04 21:59:09 arch kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
    Nov 04 21:59:09 arch kernel: pnp: PnP ACPI: found 12 devices
    Nov 04 21:59:09 arch kernel: ACPI: bus type PNP unregistered
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
    Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb0fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 7 [mem 0x80000000-0xffffffff]
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 2
    Nov 04 21:59:09 arch kernel: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    Nov 04 21:59:09 arch kernel: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    Nov 04 21:59:09 arch kernel: TCP: Hash tables configured (established 16384 bind 16384)
    Nov 04 21:59:09 arch kernel: TCP: reno registered
    Nov 04 21:59:09 arch kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 1
    Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Boot video device
    Nov 04 21:59:09 arch kernel: PCI: CLS 64 bytes, default 64
    Nov 04 21:59:09 arch kernel: Unpacking initramfs...
    Nov 04 21:59:09 arch kernel: Freeing initrd memory: 3000K (ffff880037a14000 - ffff880037d02000)
    Nov 04 21:59:09 arch kernel: Scanning for low memory corruption every 60 seconds
    Nov 04 21:59:09 arch kernel: audit: initializing netlink socket (disabled)
    Nov 04 21:59:09 arch kernel: type=2000 audit(1383613146.559:1): initialized
    Nov 04 21:59:09 arch kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Nov 04 21:59:09 arch kernel: zbud: loaded
    Nov 04 21:59:09 arch kernel: VFS: Disk quotas dquot_6.5.2
    Nov 04 21:59:09 arch kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Nov 04 21:59:09 arch kernel: msgmni has been set to 4001
    Nov 04 21:59:09 arch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Nov 04 21:59:09 arch kernel: io scheduler noop registered
    Nov 04 21:59:09 arch kernel: io scheduler deadline registered
    Nov 04 21:59:09 arch kernel: io scheduler cfq registered (default)
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    Nov 04 21:59:09 arch kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 8086 ss_did 27d2
    Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
    Nov 04 21:59:09 arch kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Nov 04 21:59:09 arch kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
    Nov 04 21:59:09 arch kernel: vesafb: scrolling: redraw
    Nov 04 21:59:09 arch kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Nov 04 21:59:09 arch kernel: vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90002400000, using 1216k, total 1216k
    Nov 04 21:59:09 arch kernel: Console: switching to colour frame buffer device 80x30
    Nov 04 21:59:09 arch kernel: fb0: VESA VGA frame buffer device
    Nov 04 21:59:09 arch kernel: intel_idle: does not run on family 6 model 15
    Nov 04 21:59:09 arch kernel: GHES: HEST is not enabled!
    Nov 04 21:59:09 arch kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Nov 04 21:59:09 arch kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Nov 04 21:59:09 arch kernel: Linux agpgart interface v0.103
    Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
    Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
    Nov 04 21:59:09 arch kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Nov 04 21:59:09 arch kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Nov 04 21:59:09 arch kernel: mousedev: PS/2 mouse device common for all mice
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: RTC can wake from S4
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    Nov 04 21:59:09 arch kernel: cpuidle: using governor ladder
    Nov 04 21:59:09 arch kernel: cpuidle: using governor menu
    Nov 04 21:59:09 arch kernel: drop_monitor: Initializing network drop monitor service
    Nov 04 21:59:09 arch kernel: TCP: cubic registered
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 10
    Nov 04 21:59:09 arch kernel: NET: Registered protocol family 17
    Nov 04 21:59:09 arch kernel: Key type dns_resolver registered
    Nov 04 21:59:09 arch kernel: PM: Hibernation image not present or could not be loaded.
    Nov 04 21:59:09 arch kernel: registered taskstats version 1
    Nov 04 21:59:09 arch kernel: Magic number: 5:843:960
    Nov 04 21:59:09 arch kernel: memory memory11: hash matches
    Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: setting system clock to 2013-11-05 00:59:07 UTC (1383613147)
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
    Nov 04 21:59:09 arch kernel: Write protecting the kernel read-only data: 8192k
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
    Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
    Nov 04 21:59:09 arch systemd-udevd[58]: starting version 208
    Nov 04 21:59:09 arch kernel: Floppy drive(s): fd0 is 1.44M
    Nov 04 21:59:09 arch kernel: SCSI subsystem initialized
    Nov 04 21:59:09 arch kernel: ACPI: bus type USB registered
    Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver usbfs
    Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver hub
    Nov 04 21:59:09 arch kernel: usbcore: registered new device driver usb
    Nov 04 21:59:09 arch kernel: ACPI: bus type ATA registered
    Nov 04 21:59:09 arch kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Nov 04 21:59:09 arch kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Nov 04 21:59:09 arch kernel: libata version 3.00 loaded.
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
    Nov 04 21:59:09 arch kernel: ehci-pci: EHCI PCI platform driver
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
    Nov 04 21:59:09 arch kernel: FDC 0 is a post-1991 82077
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: version 2.13
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: scsi0 : ata_piix
    Nov 04 21:59:09 arch kernel: scsi1 : ata_piix
    Nov 04 21:59:09 arch kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
    Nov 04 21:59:09 arch kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: MAP [
    Nov 04 21:59:09 arch kernel: P0 P2 P1 P3 ]
    Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: ata2: port disabled--ignoring
    Nov 04 21:59:09 arch kernel: scsi2 : ata_piix
    Nov 04 21:59:09 arch kernel: scsi3 : ata_piix
    Nov 04 21:59:09 arch kernel: ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
    Nov 04 21:59:09 arch kernel: ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: debug port 1
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb204000
    Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Nov 04 21:59:09 arch kernel: hub 5-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 5-0:1.0: 8 ports detected
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
    Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
    Nov 04 21:59:09 arch kernel: ata4.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
    Nov 04 21:59:09 arch kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Nov 04 21:59:09 arch kernel: ata4.00: configured for UDMA/133
    Nov 04 21:59:09 arch kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 4096-byte physical blocks
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write Protect is off
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Nov 04 21:59:09 arch kernel: sda: sda1 sda2 sda3 sda4 sda5
    Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Attached SCSI disk
    Nov 04 21:59:09 arch kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
    Nov 04 21:59:09 arch kernel: tsc: Refined TSC clocksource calibration: 2399.950 MHz
    Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Nov 04 21:59:09 arch systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Nov 04 21:59:09 arch systemd[1]: Set hostname to <arch>.
    Nov 04 21:59:09 arch kernel: Switched to clocksource tsc
    Nov 04 21:59:09 arch systemd[1]: Failed to load default target: No such file or directory
    Nov 04 21:59:09 arch systemd[1]: Trying to load rescue target...
    Nov 04 21:59:09 arch systemd[1]: Starting Encrypted Volumes.
    Nov 04 21:59:09 arch systemd[1]: Reached target Encrypted Volumes.
    Nov 04 21:59:09 arch systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Nov 04 21:59:09 arch systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Nov 04 21:59:09 arch systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Nov 04 21:59:09 arch systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Nov 04 21:59:09 arch systemd[1]: Starting Journal Socket.
    Nov 04 21:59:09 arch systemd[1]: Listening on Journal Socket.
    Nov 04 21:59:09 arch systemd[1]: Starting Setup Virtual Console...
    Nov 04 21:59:09 arch systemd[1]: Starting Apply Kernel Variables...
    Nov 04 21:59:09 arch systemd[1]: Started Set Up Additional Binary Formats.
    Nov 04 21:59:09 arch systemd[1]: Started Load Kernel Modules.
    Nov 04 21:59:09 arch systemd[1]: Mounted FUSE Control File System.
    Nov 04 21:59:09 arch systemd[1]: Mounting POSIX Message Queue File System...
    Nov 04 21:59:09 arch systemd[1]: Mounting Huge Pages File System...
    Nov 04 21:59:09 arch systemd[1]: Mounting Configuration File System...
    Nov 04 21:59:09 arch systemd[1]: Starting Journal Service...
    Nov 04 21:59:09 arch systemd[1]: Started Journal Service.
    Nov 04 21:59:09 arch systemd-journal[120]: Journal started
    -- Subject: The Journal has been started
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- The system journal process has been starting up, opened the journal
    -- files for writing and is now ready to process requests.
    Nov 04 21:59:09 arch systemd[1]: Starting Create list of required static device nodes for the current kernel...
    -- Subject: Unit kmod-static-nodes.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit kmod-static-nodes.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Kernel Socket.
    -- Subject: Unit systemd-udevd-kernel.socket has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-kernel.socket has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Listening on udev Kernel Socket.
    -- Subject: Unit systemd-udevd-kernel.socket has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-kernel.socket has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Control Socket.
    -- Subject: Unit systemd-udevd-control.socket has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-control.socket has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Listening on udev Control Socket.
    -- Subject: Unit systemd-udevd-control.socket has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udevd-control.socket has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting udev Coldplug all Devices...
    -- Subject: Unit systemd-udev-trigger.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udev-trigger.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Mounting Debug File System...
    -- Subject: Unit sys-kernel-debug.mount has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-debug.mount has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-sda4.device...
    -- Subject: Unit dev-sda4.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-sda4.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device...
    -- Subject: Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Mounting Temporary Directory...
    -- Subject: Unit tmp.mount has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit tmp.mount has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started File System Check on Root Device.
    -- Subject: Unit systemd-fsck-root.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-fsck-root.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Remount Root and Kernel File Systems...
    -- Subject: Unit systemd-remount-fs.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-remount-fs.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Starting Root Slice.
    -- Subject: Unit -.slice has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit -.slice has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Created slice Root Slice.
    -- Subject: Unit -.slice has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit -.slice has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting System Slice.
    -- Subject: Unit system.slice has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit system.slice has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Created slice System Slice.
    -- Subject: Unit system.slice has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit system.slice has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device...
    -- Subject: Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started Apply Kernel Variables.
    -- Subject: Unit systemd-sysctl.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-sysctl.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted POSIX Message Queue File System.
    -- Subject: Unit dev-mqueue.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-mqueue.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Huge Pages File System.
    -- Subject: Unit dev-hugepages.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit dev-hugepages.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Configuration File System.
    -- Subject: Unit sys-kernel-config.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-config.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Debug File System.
    -- Subject: Unit sys-kernel-debug.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit sys-kernel-debug.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Mounted Temporary Directory.
    -- Subject: Unit tmp.mount has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit tmp.mount has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started Create list of required static device nodes for the current kernel.
    -- Subject: Unit kmod-static-nodes.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit kmod-static-nodes.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started udev Coldplug all Devices.
    -- Subject: Unit systemd-udev-trigger.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-udev-trigger.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Create static device nodes in /dev...
    -- Subject: Unit systemd-tmpfiles-setup-dev.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-tmpfiles-setup-dev.service has begun starting up.
    Nov 04 21:59:09 arch systemd[1]: Started Remount Root and Kernel File Systems.
    -- Subject: Unit systemd-remount-fs.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-remount-fs.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Starting Load/Save Random Seed...
    -- Subject: Unit systemd-random-seed.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-random-seed.service has begun starting up.
    Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Nov 04 21:59:09 arch systemd[1]: Started Load/Save Random Seed.
    -- Subject: Unit systemd-random-seed.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit systemd-random-seed.service has finished starting up.
    -- The start-up result is done.
    Nov 04 21:59:09 arch systemd[1]: Started Create static device nodes in /dev.
    -- Subject: Unit systemd-tmpfiles-setup-dev.service has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mail

  • IMac Help - won't start up in OSX, starts to text...

    I was wiping my hard drive so that I could give away my old 20" white iMac G5. It worked fine the first time using the OSX Installation disk, but someone told me I should do it several times to be sure to remove all the data in the binary. So I did it a second time and that worked fine too. I decided to do it a third time so that I could put the new person's info onto the computer and I got a disk error during the re-install. It asked me if I wanted to "try again" so I clicked yes, but something bad must have happened...
    Now the computer won't start up in OSX and it won't boot from the disk (even if I hold down the C key). When it starts up, first I get a gray screen with the apple, then I have a quick flask of a tiny file folder with a question mark, then a quick flask of the same file folder but this time with the Mac face graphic, then the screen goes black and there is a bunch of white text. I can post the text if it will help - at the very end it says something like: localhost:/ root#
    I tried calling apple and they just told me to turn off the mouse and keyboard and try again - didn't work. I have tried to boot in safe mode, I have tried to reboot from the start up disk (it just ejects the disk), I have tried to reset the PRAM, nothing is working. I do not have any peripherals other than the mouse and the keyboard (I had to go out and buy a new wired keyboard today just to push the C button to try to start up from disk since the wireless keyboard wasn't being recognized).
    I have searched all the support docs and nothing seems to work or be just right. I am not an idiot, so if I need to type in a bunch of code that would be fine, just tell me what to do! Otherwise, I am hauling this beast into the so-called Genius Bar.
    Please help!

    So hooked the iMac up to my MacBookPro as a firewire target disk and ran a disk utility on it overnight. It didn't fix the problem completely, but it didn't get worse. Now, instead of the black screen with white programming text, I get a gray screen with a flashing question mark (a file folder that flashes between the mac face and a question mark) this time it just keeps flashing (unlike before where it only appeared once).
    I have tried resetting the PRAM, the NVRAM, and I have tried resetting the SMU (thanks for the advice, Barry, I was hopeful about that one!) but nothing is working. It won't let me start from a disk, even though I have checked the disk in another computer and it works fine. I am thinking that the computer has lost the ability to recognize the disk drive.
    Is there any way to re-install the operating system remotely (via my MacBookPro or anything else)?
    Thanks again for any advice!

  • IMac won't start with Thunderbolt Display connected after firmware update

    After updating my thunderbolt display firmware to version 1.2 this morning via the App Store, my mid-2014 iMac won't start up with the external display connected.  I can get the iMac to start up only by disconnecting the display's thunderbolt connector. After the iMac comes up, I can reconnect the display and everything appears to function normally.  I've tried several restarts and the iMac won't start up with the display connected.  Anyone else experience this?

    Hello rameta,
    It may help to reset your Mac's SMC and PRAM.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Reset your computer’s PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    Allen

Maybe you are looking for

  • Trouble restoring my iPod Touch!

    Hi, I have an iPod Touch, not sure if it's 2nd or 3rd gen. It's not under warranty, my dad bought it second hand for himself then gave it to me when he bought his iPhone 4. I started having problems the other day when the battery icon was showing the

  • Error attempting to instantiate the activation agent class "oracle.tip.adap

    I am trying to run the JMS and AQ tutorials and experiencing class problems. The BPEL process I am looking at is Queue2Topic. When I go to the BPEL console, I have a yellow exclamation mark against the process Queue2Topic, and when I click on the pro

  • Pdf version of Using Photoshop elements 9 italian language damaged

    I cannot download the pdf file of Using Photoshop elements 9 in the italian language because is damaged. Someone can help me?  Thanks

  • OS X Disk

    Okay, so I had read in another post somewhere in this forum from a person saying that there are programs that are on the OS X Operating System disk that are not pre-installed when you recieve your computer. Is this true? If so, what type of programs

  • Adding JUnit extension to 10.1.3EA

    Is there a way to add the JUnit extension without using Help/Check for Updates? My work computer is not directly connected to the Internet. Thanks, Robert