Feed For all Tips

Hi, So I figured out how to take the rss file off my idisk and import it into Feed for All. How do I shorten the name without causing problems. Also I have a new image for my Podcast in the Iweb. I published it too my .mac account and it shows up there but not in Itunes...any help out there?

Do a Google search for 'itunes rss feed' and you will get a number of hits - 30 million - I am sure that you can find the info that you seek there.
This might be the best link from Apple http://www.apple.com/rss/
MJ

Similar Messages

Rss Feeds for Apple news

Hey, how can I get a Rss Feeds for all the Apple news, not only for the forum discussions?

http://www.apple.com/rss/

I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

I have a iPhone 4 and all of a sudden when I answer a phone call the person on the other end can't hear me ???? I can hear them , so I've had to put it on speaker for all my calls - ? Any tips on how to get it back to being able to speak normally

Morning Lupoipia,
Thanks for using Apple Support Communities.
If you can't be heard by someone who is calling, take a look at this article:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Best of luck,
Mario

Helpful Tips for all iOS Devices!

Here's the link for helpful stuff, including news and tips for all iOS devices!
El LINKO

Thank you,
Then, when you have to create an iphone+ipad app joined, have you only possibility to create Multifolio app type?
Then, can you only see some multifolio options like the Android app (next link)?
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/digitalpublishingsuit e/articles/making-and-deploying-android-dps-viewers/fig03.jpg
So, with iPad+iPhone apps, the iPad version would be multifolio app too, that is right?
And are these apps (iPad+iPhone) multifolio (next link)?
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/digitalpublishingsuit e/articles/making-and-deploying-android-dps-viewers/fig10.jpg
can I only create single folio for iPads when I have iPad app alone?
Thanks a lot for you information,

Daily Tips RSS feed for Snow Leopard?

Someone recently told me that there's a Daily Tips feed for Snow Leopard with general helpful hints to get the most out of it. I've been in a search frenzy, but there's a lot in the lists here and almost nothing when you type in "Tips" in the search field, and none that obviously indicate that they might be that sort of feed in the RSS feeds lists. I'm not having problems, just like to have little prods in my education as I learn the OS. I'd always been a fan of MacWorld and MacUser magazines tips scattered throughout their pages before they went beyond just the computers into everything else. Miss that because I learned SO much from them.

If you want more, then see these (if you're not coming from windoze, skip the switching stuff):
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Anatomy of a Mac,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

ITunes feed broken for all new episodes

My HD Movie Trailers iTunes feed has recently been generating errors for all new episodes I add (corrupt file or can't be played).
The podcast is run off Blogspot with the RSS feed going through Feedburner using SmartCast. The XML seems to check out, and all the media file links download properly in a browser or other RSS subscribed feed - it's only in iTunes that things seem to have gone awry.
This is the iTunes feed:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=204096451
And the blog feed: http://feeds.feedburner.com/hdtrailers
Any help people can give would be great, as this is a really popular feed and I am getting a lot of complaints! Cheers.

Correct. iTunes needs a locally stored (on your computer's hard drive), self-contained movie in order to play it properly.
Remember that a reference file only contains relative pointers to the actual media. When you move/copy that reference file to another computer it can not find that original media anymore since the path to it doesn't exist on that computer.
I could create a reference file where the media is contained on my hard drive, this file will be really small since it just contains local directions to the media and not the media itself. If I give you this small file, you would receive an error when you try to play it indicating that it can't find the media...since it is attempting to find that media on your computer (where it doesn't exist).
Perhaps an analogy would be if I didn't have space in my closet to store an item. I put that item in the garage, and then store a small shoebox in my closet with a note in it that says "it's in the garage". Later, when I look in my closet for the item, I open the shoebox and read the note and go to the garage to retrieve the item.
Now I give you the shoebox and you put it in your closet. Later you go to retrieve the item, go to the closet open the shoebox and read the note that says "it's in the garage". You go to your garage, an look around and pull your hair out in frustration since you can't find the item there.
Make sense?

Solve the MSN/Jabbber problems once and for all!!

Hey there.
I use iChat to talk to my msn friends through jabber. I have three gripes with this, two I think can be Solved. The first being user name, everytime I want to change my user name (Which is not often) I have to go into a third party app to do it, thats a pain in the ***. Second, Buddy icons. Now all I want is my company logo to show up next to my name, I don't want to change it, unless I change my logo, but I have to be logged in on msn to show this, not through jabber.
So for you developers out there.
It's obvious that when you use msn it connects to a network and grabs your username and icon. So is it possible to make a widget that is connected to this network and that you can easily type in your username and also drag and drop the logo you want to use onto it. Then it stays connected with your info so your friends can see your buddy icon while you sit there happily using iChat (appart from the no transfers)..
Hope someone can solve this problem, cause if not i'm going to be spending a lot of time trying to do it myself!
Thanks

ok thanks for the tip.
Does anyone know a good easy to install server for osx then that I can connect mainly to MSN with.
Hopefully with features like Buddy Icons and file transfers.
So that I can use iChat with my msn buddy's just like my aim ones.
Thanks

HT204053 My kids now each have an itouch, should we all have different apple ids even if I am paying for all itunes and app store purchases? what about icloud? I would like to share itunes and app purchases, but not necessarily photos...help please!

My kids now each have an itouch, should we all have different apple ids even if I am paying for all itunes and app store purchases? what about icloud? I would like to share itunes and app purchases, but not necessarily photos...help please!

The recommended solution for most families is to share the same Apple ID for iTunes and App Store purchases, so you can share your purchases, but us different IDs for iMessage, FaceTime and iCloud. With this arrangement, each person can automatically download purchases made on the shared ID (by turning this feature on in Settings>iTunes & App Stores), while keeping their FaceTime calls, text messages and iCloud data (including photo stream) separated. There is no requirement that the ID you use for purchasing be the same as the ID you use for these other services.
This article: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/.

Multiple lines of event title and location failed to show for All Day event in SharePoint 2010 Calendar

I have a calendar with SPD workflow to display multiple lines for Title, Attendees, Location.
1. Created a custom columne "Breaklines" and set to "Multiple lines of text"
2. Set Monthly View to display the "Breaklines"
3. in SPD I created a workflow like this:
4. On the Calendar page, I used a javascript to remove the <br/>
<script src="http://code.jquery.com/jquery-1.10.2.min.js"
type="text/javascript"></script><script
type="text/javascript">
function updateCalendarWeekday()
   $('.ms-acal-title').each(function(){
    var str = $(this).html();
    str = str.replace(/</g,
"<");
    str = str.replace(/>/g,
">");
    $(this).html(str);
_spBodyOnLoadFunctionNames.push('calendarEventLinkIntercept');
// hook into the existing SharePoint calendar load function
function calendarEventLinkIntercept()
   var OldCalendarNotify4a
= SP.UI.ApplicationPages.CalendarNotify.$4a;
   SP.UI.ApplicationPages.CalendarNotify.$4a
= function ()
      OldCalendarNotify4a();
      updateCalendarWeekday();
}</script><style>
.ms-acal-item
                HEIGHT:
60px !important
.ms-acal-summary-itemrow
                HEIGHT:
85px !important
}</style>
Everything works fine, except that when the All Day event is checked, the display screwed like this:
I guess that when the event is All Day Event, the Start Time and End Time is not filled by the user (although they show in the form as 12:00 am -11:59PM), so the top line space is now used to display Title and Location. Since the Top Space for
Start and End Time is a single line, it displays everything on one line. Plus the script does not act on this space.
Does anyone know a fix for this problem?
Thanks for any tips!

Is there a way to modify the javescript so that it also works in the "start-end time" space?

Open with [Pages4.3] for ALL Pages docs not working

Hi there,
I am unable to set the default application for all PAGES document to open in a lesser version (Pages version 4.3) to that of Pages version 5.1 which came pre-installed on my machine.
The reason why I want Pages 4.3 opening on default instead of Pages 5 is because Pages 4.3 contains the features version 5 no longer has. I also wish to retain Pages 5 to open historical documents.
I am running OS10.9.5 with Pages version 5.1 (1769) as standard with the machine when I bought it. I copied to my machine the application Pages 4.3. It runs, I have no problem opening both copies of Pages.
I now want all my Pages documents to open in v4.3 as default (not v5). This is where I fall over.
1. I "Get info" on a Pages document,
2. In the "Open with" panel I select Pages 4.3 from the dropdown menu. Upon changing the application the "Change All" button is becomes active.
3. I click on "Change All" button and confirmation message appears (see image). I click "Continue" and the confirmation message disappears.
4. ISSUE - The default application reverts back to "Pages" (see image) which is the same selection as when I started (step 1)
(Note: I also selected "Other" from the dropdown menu and selected Pages 4.3 from the applications folder through the dialogue window, but without joy)
5. When I double-click the selected document (the document I selected in step 1) it opens in Pages 4.3. However, when I double-click any other Pages document it opens in Pages5, not Pages4.3.
I might add, others in my office, with varying OS (10.10, and 10.7) and Pages 5.5.2 have not had the same issue as I have. They followed the same process as above and in Step4, their selection of Pages4.3 remained as the dropdown value, not "Pages".
I would be grateful to hear from those who have had similar issue and overcome it. Many thanks

Hi stutteringfish,
was hoping for something more definitive... something more like what the feature "open with [for all]" is designed to do.
I am afraid not. That setting does not stick with Pages 5 (or Numbers 3).
My solution is to keep icons for the old and new versions on my Dock. Then I can launch whichever and Menu > File > Open (or Open Recent) from within the appropriate version..
Wayne Contello has written a User Tip for working with the old and new versions of iWork.
Need newer version of Numbers to open file
Regards,
Ian.

How to remove the option "Set as default background..." from the right-click menu on a picture, for all users.

Hi! I would like to know if there is any possibility to remove the option "Set as default background..." from the right-click menu on a picture, for all users. I know that's possible to edit userContent.css or userChrome.css, but this concerns only a profile at a time and being in a domain, I would like to set this for all people using Firefox.
Can it be possible to edit a mozilla.cfg file to get the same result?
Thank you in advance for help and tips.

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

How to expire password for all users

I need to be able to expire the password for all users. This is to prevent access by any user until each one is released individually (administrator will set a new password and notify user).
Please could someone give me any tips on how to expire all users passwords.
Thanks

Login to the Internet Directory
Select the user and modify its expiry date
hope this helps u

RSS for all messages in a forum

I have been used to "follow" a RSS feed for a specific forum (Coherence - its traffic is low enough for the RSS feed to be useful). I liked that, because it contained *all* posts in the forum ; if a thread had 1 answer, I got 2 posts in the feed : the OP and the answer - and I mostly read only threads with already posted answers.
I've just subscribed to the new feed for the Coherence form - now I have only one item for each thread, and I cannot know if there is an answer... How can I come back to previous behavior ? Can I do it with RSS or shall I use something else ?
PS : wow, the default font size is *REALLY* uselessly huge. Seriously...

I have been used to "follow" a RSS feed for a specific forum (Coherence - its traffic is low enough for the RSS feed to be useful). I liked that, because it contained *all* posts in the forum ; if a thread had 1 answer, I got 2 posts in the feed : the OP and the answer - and I mostly read only threads with already posted answers.
I've just subscribed to the new feed for the Coherence form - now I have only one item for each thread, and I cannot know if there is an answer... How can I come back to previous behavior ? Can I do it with RSS or shall I use something else ?
PS : wow, the default font size is *REALLY* uselessly huge. Seriously...

Free Safari for all

There doesn't seem to be anything in the Tiger version of Safari that would keep it from being used in Panther. So, why doesn't Apple release the latest version of Safari for all versions of OS X for free? Like how Windows IE is free for whatever version of Windows you use. It doesn't really seem like RSS feeds would make Safari unusable in Panther, does it? And that is really the only major new thing in the Tiger version of Safari.
Wouldn't it make more sense for Apple to make it available for all of their operating systems than having its users instead download and use a competing product like Firefox or Camino or Opera or whatever?
Mac OS X (10.4.8)

how do i exaclty
make a new new topic?
Go here, Post New Topic:
http://discussions.apple.com/forum.jspa?forumID=876

Joins And For all Enteries in Select Statement

Could you please tell me when there is a high amount of data which is being handled in the table, does the use of INNER JOINS and FOR ALL ENTERIES in SELECT Statement decreases the system performance? ?
Can you also let me know where can i get some tips regarding do's and dont's for ABAP Programming, I want to increase my system performance.
Currently the programs which are being used are taking a lot of time for execution...
Its very URGENT!

Hai Jyotsna
Go through the following Tips for improving Performence
For all entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Some steps that might make FOR ALL ENTRIES more efficient:
Removing duplicates from the driver table
Sorting the driver table
If possible, convert the data in the driver table to ranges so a BETWEEN statement is used instead of and OR statement:
               FOR ALL ENTRIES IN i_tab
                  WHERE mykey >= i_tab-low and
             mykey <= i_tab-high.
Nested selects
The plus:
Small amount of data
Mixing processing and reading of data
Easy to code - and understand
The minus:
Large amount of data
when mixed processing isnt needed
Performance killer no. 1
Select using JOINS
The plus
Very large amount of data
Similar to Nested selects - when the accesses are planned by the programmer
In some cases the fastest
Not so memory critical
The minus
Very difficult to program/understand
Mixing processing and reading of data not possible
Use the selection criteria
SELECT * FROM SBOOK.
CHECK: SBOOK-CARRID = 'LH' AND
                  SBOOK-CONNID = '0400'.
ENDSELECT.
SELECT * FROM SBOOK
WHERE CARRID = 'LH' AND
        CONNID = '0400'.
ENDSELECT.
Use the aggregated functions
C4A = '000'.
SELECT * FROM T100
WHERE SPRSL = 'D' AND
        ARBGB = '00'.
CHECK: T100-MSGNR > C4A.
C4A = T100-MSGNR.
ENDSELECT.
SELECT MAX( MSGNR ) FROM T100 INTO C4A
WHERE SPRSL = 'D' AND
       ARBGB = '00'.
Select with view
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
        AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T
    WHERE   DOMNAME    = DD01L-DOMNAME
        AND AS4LOCAL   = 'A'
        AND AS4VERS    = DD01L-AS4VERS
        AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
SELECT * FROM DD01V
WHERE DOMNAME LIKE 'CHAR%'
       AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
Select with index support
SELECT * FROM T100
WHERE     ARBGB = '00'
       AND MSGNR = '999'.
ENDSELECT.
SELECT * FROM T002.
SELECT * FROM T100
    WHERE     SPRSL = T002-SPRAS
          AND ARBGB = '00'
          AND MSGNR = '999'.
ENDSELECT.
ENDSELECT.
Select Into table
REFRESH X006.
SELECT * FROM T006 INTO X006.
APPEND X006.
ENDSELECT
SELECT * FROM T006 INTO TABLE X006.
Select with selection list
SELECT * FROM DD01L
WHERE DOMNAME LIKE 'CHAR%'
        AND AS4LOCAL = 'A'.
ENDSELECT
SELECT DOMNAME FROM DD01L
INTO DD01L-DOMNAME
WHERE DOMNAME LIKE 'CHAR%'
       AND AS4LOCAL = 'A'.
ENDSELECT
Key access to multiple lines
LOOP AT TAB.
CHECK TAB-K = KVAL.
ENDLOOP.
LOOP AT TAB WHERE K = KVAL.
ENDLOOP.
Copying internal tables
REFRESH TAB_DEST.
LOOP AT TAB_SRC INTO TAB_DEST.
APPEND TAB_DEST.
ENDLOOP.
TAB_DEST[] = TAB_SRC[].
Modifying a set of lines
LOOP AT TAB.
IF TAB-FLAG IS INITIAL.
    TAB-FLAG = 'X'.
ENDIF.
MODIFY TAB.
ENDLOOP.
TAB-FLAG = 'X'.
MODIFY TAB TRANSPORTING FLAG
           WHERE FLAG IS INITIAL.
Deleting a sequence of lines
DO 101 TIMES.
DELETE TAB_DEST INDEX 450.
ENDDO.
DELETE TAB_DEST FROM 450 TO 550.
Linear search vs. binary
READ TABLE TAB WITH KEY K = 'X'.
READ TABLE TAB WITH KEY K = 'X' BINARY SEARCH.
Comparison of internal tables
DESCRIBE TABLE: TAB1 LINES L1,
                TAB2 LINES L2.
IF L1 <> L2.
TAB_DIFFERENT = 'X'.
ELSE.
TAB_DIFFERENT = SPACE.
LOOP
AT TAB1.
    READ TABLE TAB2 INDEX SY-TABIX.
    IF TAB1 <> TAB2.
      TAB_DIFFERENT = 'X'. EXIT.
    ENDIF.
ENDLOOP.
ENDIF.
IF TAB_DIFFERENT = SPACE.
ENDIF.
IF TAB1[] = TAB2[].
ENDIF.
Modify selected components
LOOP AT TAB.
TAB-DATE = SY-DATUM.
MODIFY TAB.
ENDLOOP.
WA-DATE = SY-DATUM.
LOOP AT TAB.
MODIFY TAB FROM WA TRANSPORTING DATE.
ENDLOOP.
Appending two internal tables
LOOP AT TAB_SRC.
APPEND TAB_SRC TO TAB_DEST.
ENDLOOP
APPEND LINES OF TAB_SRC TO TAB_DEST.
Deleting a set of lines
LOOP AT TAB_DEST WHERE K = KVAL.
DELETE TAB_DEST.
ENDLOOP
DELETE TAB_DEST WHERE K = KVAL.
Tools available in SAP to pin-point a performance problem
·                The runtime analysis (SE30)
·                SQL Trace (ST05)
·                Tips and Tricks tool
·                The performance database
Optimizing the load of the database
Using table buffering
Using buffered tables improves the performance considerably. Note that in some cases a statement can not be used with a buffered table, so when using these statements the buffer will be bypassed. These statements are:
Select DISTINCT
ORDER BY / GROUP BY / HAVING clause
Any WHERE clause that contains a sub query or IS NULL expression
JOIN s
A SELECT... FOR UPDATE
If you wan t to explicitly bypass the buffer, use the BYPASS BUFFER addition to the SELECT clause.
Use the ABAP SORT Clause Instead of ORDER BY
The ORDER BY clause is executed on the database server while the ABAP SORT statement is executed on the application server. The database server will usually be the bottleneck, so sometimes it is better to move the sort from the database server to the application server.
If you are not sorting by the primary key ( E.g. using the ORDER BY PRIMARY key statement) but are sorting by another key, it could be better to use the ABAP SORT statement to sort the data in an internal table. Note however that for very large result sets it might not be a feasible solution and you would want to let the database server sort it.
Avoid the SELECT DISTINCT Statement
As with the ORDER BY clause it could be better to avoid using SELECT DISTINCT, if some of the fields are not part of an index. Instead use ABAP SORT + DELETE ADJACENT DUPLICATES on an internal table, to delete duplicate rows.
Thanks & regards
Sreenivasulu P

Feed For all Tips

Similar Messages

Maybe you are looking for