Feedback on the potential use of the tool and about the Task Life Cycle

Hi
The task statuses does not considers some statues. We have worked on the task lifecycle for workflows (see image below). You are missing: Created, offered, allocated before getting the category of not started because otherwise your problem might be to not have resources availables.
Once In Progress a task can be suspended/resumed, delegated.Failed or Cancelled, skipped. Once a task is Completed, At Risk and Failed.:
We have been working on workflow modeling for developing UIs. The WorkflowLab project has a lot of potential if we imagine an automated process to generate Flex (Information Systems) applications based on Workflows. Imagine that the granular details of a task are mapped onto Flex UIs.
Have you ever consider this potential of using a workflow model as a design of an Information system?

If you need further information, this is a site with publicly available papers of this topic.
http://www.isys.ucl.ac.be/bchi/members/jgu/publications.htm
The main topic is on how from a workflow model the User Interfaces of the system modeled can be generated but special atention has been paid to task modeling.
If we can be of any help we would be very pleased to collaborate with your project.
Juan

Similar Messages

Writing the file using Write to SGL and reading the data using Read from SGL

Hello Sir, I have a problem using the Write to SGL VI. When I am trying to write the captured data using DAQ board to a SGL file, I am unable to store the data as desired. There might be some problem with the VI which I am using to write the data to SGL file. I am not able to figure out the minor problem I am facing. I am attaching a zip file which contains five files.
1)      Acquire_Current_Binary_Exp.vi -> This is the VI which I used to store my data using Write to SGL file.
2)      Retrive_BINARY_Data.vi -> This is the VI which I used to Read from SGL file and plot it
3)      Binary_Capture -> This is the captured data using (1) which can be plotted using (2) and what I observed is the plot is different and also the time scare is not as expected.
4)      Unexpected_Graph.png is the unexpected graph when I am using Write to SGL and Read from SGL to store and retrieve the data.
5)      Expected_Graph.png -> This is the expected data format I supposed to get. I have obtained this plot when I have used write to LVM and read from LVM file to store and retrieve the data.
I tried a lot modifying the sub VI’s but it doesn’t work for me. What I think is I am doing some mistake while I am writing the data to SGL and Reading the data from SGL. Also, I don’t know the reason why my graph is not like (5) rather I am getting something like its in (4). Its totally different. You can also observe the difference between the time scale of (4) and (5).
Attachments:
Krishna_Files.zip ‏552 KB

The binary data file has no time axis information, it is pure y data. Only the LVM file contains information about t(0) and dt. Since you throw away this information before saving to the binary file, it cannot be retrieved.
Did you try wiring a 2 as suggested?
(see also http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=925 )
Message Edited by altenbach on 07-29-2005 11:35 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Retrive_BINARY_DataMOD2.vi ‏1982 KB

I just watched a Netflix movie using my iPad 2. Now I need to know how to return the movie using my iPad 2 and deleting the movie from my queue?

I just watched a movie using my iPad 2. Now I need to know how to return and delete the movie from my Netflix queue and account using the iPad 2?

Perhaps this question would be better answered here:
http://www.netflix.com/Help

When using the clone stamp tool and press the alt key layer just moves

when using the clone stamp tool and press the alt key to set a point it seem to create a new layer and just moves the layer arround. I can not get the clone to now work. what did I do?

Open the Clone Source panel. I think you'll find the Clipped option is disabled. If so, enable it.

We recived ipads today in school to use as a tool and they said if i sync it to my itunes my itunes will be erased and all the ipad stuff currently on there would be erased the second i connect to the school i was wondering if this was possible?

we recived ipads today in school to use as a tool and they said if i sync it to my itunes my itunes will be erased and all the ipad stuff currently on there would be erased the second i connect to the school i was wondering if this was possible? i already pointed a couple things that they said was true but were false like useing that find my ipad thing were it just zooms in on your location they also said it would beep and they can track it anywhere witout a 3g network which we use the wi fi. teachers can connect to itunes i belive becasue they don't have the same rescrtictions as use students but early in the year they said one teacher tried and failed with the results that said would happen to use. besides ristrictions like loseing the app store and not being aloud to open any app wemb adresses we are to add music via the itunes that i already on the ipad. i was just wondering if there full of it right now because i think they are.

If I were a teacher setting up iPads to be used at school/work, I wouldn't link it to my personal iTunes, rather I'd create/use a different one. If for no other reason than to keep the kidlets and your fellow teachers from possibly accessing your account.

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

What is the difference between Component,Server,Tool and Software?

HI,
What is the difference between Component,Server,Tool and Software?
SHABEER

Hi
Every individual part that constitutes in making an SAP System is called a COMPONENT.e.g DB instance, Java CI, ABAP CI etc
SERVER is the actual composition of different components of SAP.e.g. a database alongwith can instance would constitue an application server.
TOOLS are the products from different organisations (SAP or Non SAP) that can be used for different functionalities like keeping a check on jobs, monitoring of the system , e.g Tivoli
SOFTWARES are a kind of tool that help you to bring up results from the system in a user acceptable format. These are utilities that act as interfaces between the user and the system.
regards
Chen

Can I use BOTH IE & FF and retain the shortcuts to both to use at will?

Can I use BOTH IE & FF and retain the shortcuts to both to use at will? I can download FF ok and use for a day or so along with IE, but after that I start to get messages from Windows saying IE is not my default browser and do I want to make it the default. If I answer no, many links in my windows mail and other links in the windows system don't work...I get a message that the file can't be found . If I answer yes, the FF shortcuts disappear and can't bring up the FF from the FF folder, I get a msg that the FF folder is corrupt!

Hi, aparently we're a problem while you installed firefox. try to uninstall and reinstall firefox again,
after you do that, open firefox and go to Tools>options>Advanced>General, and see that it have to be an option at last that sez "always check to see if firefox is the default browser on startup" uncheck that option.,
Then go to IE, go to tools>internet options>programs>and clic on "Make Default".
With this you make that IE the default browser.
Bye

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go.

I purchased a used 2008 iMac. And although the previous owner said he deleted all of his information, his iCloud account is still the primary. I don't have a clue about what to do about it. I signed him out and logged in with my info, but still no go. Is there any way to eliminate his iCloud account and make mine the primary without rebooting it back to factory settings? There was an update, I believe, that I couldn't install because i didn't have his password that is what made me aware that his acct. was still active. I don't know what to do. Any help is greatly appreciated. Thank you.

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show a

I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line.

I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line. It is not my home page. Help!!!

See also:
*https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Resetting_preferences

I recently began using reminders in ical and downloaded the iPhone and iPad app. It works great. However, the reminders in ical on the COMPUTER is difficult to work with - thin long column on the right rather than in it's own screen. is there a reminders

I recently began using reminders in ical and downloaded the iPhone and iPad app. It works great. However, the reminders in ical on the COMPUTER is difficult to work with - thin long column on the right rather than in it's own screen. is there a reminders app for the COMPUTER that is more user friendly?

sgreenie,
If you are willing to wait, Apple - OS X Mountain Lion - Inspired by iPad. Made for the Mac explains that a "Reminders" application will be included in the next release of OS X.

I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings

I was using my iphone 4s and then the app started to not work and then my phone blocked and then when i go on home most of my apps disappeared including my settings so i cant restore with out disabling find my iphone on settings please help me asap thankyou so much

Log in to icloud.com on a web browser with your Apple ID and disable FMiP there.

Got error message this Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes and install the 64-bit version and already have latest version and 64

Got error message :"This this Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes and install the 64-bit version" This is on a new macbook. I already have the latest version installed and 64 bit. Help.

Did you do what the message said?
Also try using the Win 7/Vista link in the following:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

In FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue. I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

in FCP x backup process is constantly running in background even though its done which results into slow working of FCP x. any idea to resolve the issue? I am using 10.1.3 and facing the problem ever since i have updated my FCP x to 10.1.3

Go into preferences and under playback turn off background render. That helped speed things for me when working with large files.

Feedback on the potential use of the tool and about the Task Life Cycle

Similar Messages

Maybe you are looking for