Feedback / Suggestion

So I picked up a Linksys EA4500 today after discovering that our old wrt 300n had gone kaput earlier this week. (randomly dropping connectivity and assigning multiple devices the same IP number) We're a church and the guest network feature caught my attention as well as the dual bands of the EA4500. Now that I'm using the SMART interface features I was actually a little disappointed. The guest network feature has almost no ability to define or limit the guest devices' traffic (times and sites) other than basic on and off and number of users which defeats the goal I had in purchasing it (on weekends we have much higher use and as a church do care what our guests do while on the network). Secondly, I realized I will have to define all permissions by individual device for our office as oppossed to generic settings for usage which is much more time intensive and a feature I will miss from our previous linksys device. It's great how easy to use Linksys' products are but I hope features are not lost in the process. I would recommend an update that allows for further definition of the guest network permissions. Thanks.  

Is there any forum for this ?  I thought it would be good to have some discussion on our needs.  For example, I think the volume control is not granular enough.  Sometimes, when I press down, it's a bit too soft.  When I press up, too loud.  I think it depends on the track.
I also notice that volume control is in terms of 10%.  Won't it be good if it's 5% instead ?  I see that the speed at which the volume goes up and down when I press the button, setting it at 5% would not cause a long delay.
Things like that. Would be good if there is a forum for such discussion.  Well, just my thoughts.

Similar Messages

  • SQLDeveloper...Feedback/Suggestions box...

    Hi all,
    Is there a feedback and/or suggestion box for this tool? This is a really nice tool, but there are some frustrating features that could be modified to make it really nice:
    - When you refresh a connection, why is the SQL Editor window flushed?
    - I'm probably missing something here, but under the Connections View, there should be a way to group connections under folders (or something). I have a lot of connections to manage and having one long string of connections can get difficult.
    Anyway, it would be nice to submit suggestions for the next release...keep up the great work...
    thx,
    adym

    Hopefully this thread is as good a place as any for general suggestions.
    On Mac OS X, SQL Developer stores preferences such as connection definitions deep within the SQLDeveloper.app application bundle. Why doesn't it use Java's Preferences API, which would behave properly in Mac OS X (storing preferences in the user's Library/Preferences folder)? (Or manually manage it, but use a folder within the user's Library/Preferences?)
    The usual method to install/uninstall apps on a Mac is to drag the app into a destination folder or to the trash, respectively. When I installed a new version of SQL Developer, replacing the old one, to my surprise all of my connections had disappeared. Needless to say, this is not the expected behavior. ;-) And I still do not know how to avoid it next time I update SQL Developer.
    One other lower-priority request would be to get the menu up to the menu bar instead of in the application window. Isn't this as simple as setting the apple.laf.useScreenMenuBar system property?
    Thanks for a terrific application!
    Regards,
    Mark

  • WIP mass load being launched instead ,Feedback suggestions from APS to OPM'

    Hi,
    I am trying to run an ASCP plan in the vision instance. I have created a new operating unit and associated plants and warehouses in addition to the PRU operating unit and company. For the seeded PR1 plant it launches the correct Feedback sugestion. But for the new plant that i have created it launches WIP mass load which errors out.
    Any ideas to correct this problem?????
    Thanks,
    Amit

    Amit,
    This is not an anwser to your question but you may have an answer to my question:
    I am also trying to run ASCP in Vision. I'd like to run it in the same database instance as Vision (it appears possible in the user's guide). Is this the setup you are using?
    My problem is, the default instance is TST, and although I tried adding VIS in the Instances window, it didn't accept the record (link already exists error). When I run Data Collection, the processes fail (can't write to the file).
    Any help will be appreciated,
    Aslihan

  • Magic Mouse User Feedback/Suggestion Box

    The Magic Mouse has great esthetic appeal, the touch to scroll is employed well, the swipes will take some getting used to as it is a natural movement (at least to me). The biggest shortfall I see is the inability to assign the functions, as well as the loss of the third and fourth buttons (scroll button click, and squeeze button)
    The scroll button would be easy to employ as a virtual button with a two fingered click. Clearly the device can sense the difference between one and two fingers and the motion of clicking with two fingers seems incredibly intuitive to me.
    One could also conceive of having two fingered scrolling mean something different than one fingered scrolling, think Application switching, Spaces, screen zoom.
    The problem with the swipe motion is you have to stop the mouse from moving side to side as you hold it, making the motion somewhat unnatural. Interestingly though pinching/spreading on the mouse would work very well, since the opposite movement of each finger keeps the mouse still and does not require you to hold the sides. So pinch/expand zooming would be a natural one too.
    Two finger Rotate seems hard since again the issue of the mouse moving comes up
    Apple, throw in a two finger click assignable to expose, spaces, or user choice please. Pinch Zoom too please
    Message was edited by: Michael Melkonian

    In addition to all those I'd really love two finger slide up gesture to go up a folder level, or customizable to show topsites in Safari maybe. Slide down gesture to open a folder or file.
    There are a lot of cool gestures. If Apple could create a 'watch me' method to create our one it would defeat the need for 3rd party software which could complicate the proper navigation functions. Even if most were disabled by default it gives advanced users a chance to take advantage of it's multitouch surface, which currently barely scratches the surface.

  • TS1567 I have spent about 45 mins reading the feedback/suggestions and I still cannot see any on my devices, what else can I do?

    I have changed cables, updated iTunes restarted PC what else now?
    I have a new iPhone 5s, I still cannot see it...very frustrating. I have withdrawl symptomps. I have been using iPhone since 3GS. My first iPod was 256KB. Apple (iTunes sync) have gone from best to very bad. I just hope they dont get worse.

    If you value your time you can call Apple for support. If you are more DIY guy follow that article.
    http://support.apple.com/kb/ts1538

  • Voice Over Feedback/Suggestion

    Apple,
    I would like to be able to cut and paste (into a Sticky Note that syncs with Shuffle?) my workouts as emailed by my trainer here in NY-
    then-
    when I choose "Workout"- as my "playlist"-I would like to have Voice Over read back the workout to me.
    Optionally- Dividing each exercise by a return/new paragraph, and having Voice Over state the exercise/reps/weight with each new song, would be killer (I could then advance or replay using usual controls).
    Thanks for a great product.

    Although I don't know exactly how the iPod shuffle does its VoiceOver magic, I doubt the shuffle is actually generating the voice you hear. That is probably done by iTunes on your computer, with every possible name of song, album, and playlist pre-recorded (by the computer voice) into small audio snippets that get synced to the shuffle along with the songs, and used as needed by VoiceOver.
    So you are asking for a feature that reads a longer paragraph into an audio file during the iTunes sync process. Certainly not impossible, as long as there is a way to avoid someone trying to put a BOOK into that paragraph.
    I just did a test in iTunes to see how long I could make a playlist name. There did not seem to be a limit. I put complete sentences in there. I don't have the new shuffle (yet), but if you do, try creating a workout playlist; name it so that t starts with the playlist name and includes all the other details you want. See if VoiceOver will read that entire long name to you. Apple may have implemented a limit to the length of the spoken playlist title; it would be interesting to know.

  • Suggestion - feedback anyone?

    Hey everyone. I just recently thought of an awesome, simple feature Apple should definitely integrate with the next iPod firmware update. Here it is... if anyone here has ever noticed, when shuffling songs in iTunes, there is a button to press. While that option is on, iTunes will shuffle your songs no matter what; if it's on, and you're shuffling, but suddenly decide to listen to a specific song, you can do so, but the next song after that isn't the next song on the list; Shuffle stays on. On the iPod, this can not be done. As soon as a specific song is selected for play, Shuffle is shut off, and the list is played in progressive order. Wouldn't it be intruiging to have an actual Shuffle on/off option, in which the way it's done in iTunes is how it's done on the iPod? Well, I thought so... and I'm curios you see what you guys think. Should I submit it as a feedback suggestion? Thanks in advance.

    Main Menu on iPod, scroll down to Shuffle Songs. Or its in the settings menu, too, you can shuffle songs, or albums. Also when shuffle is on, and you choose a specific song, shuffle will stay on, but that song you just chose is now listed as track 1 of XX, and shuffle continues from there.

  • This Board is for Forums Suggestions Only

    Please note that this board is for feedback and suggestions regarding the Verizon Residential forums only. If you think something can be added, modifed or improved - let us know here.
    If you have comments or suggestions regarding a particular Verizon service, please post it on the board covering that service. This will ensure that your comments reach the right audience. This will also allow other users to support, discuss or build on your initial idea or comment.
    By posting your comments here on the Forum Feedback board, you can let us know how we can make this community better. What would you change?
    We value all of your feedback and suggestions. 
    Your Verizon Community Team

    Johathan,
    If there is a way to do it, I suggest you put the heading of this thread in bold on the Feedback & Suggestions Board page, sticky it, make sure it is at the top of the list of threads on this Board, and make it permanently unread so that returning members who have read it once will read it again and hopefully pay attention to what it says.
    Just my $.02 worth.
    Justin
    Verizon FiOS TV, Internet, and phone
    IMG 1.6.0, Build 06.89
    Keller, TX
    Message Edited by Justin on 12-08-2008 09:57 AM

  • Need suggestion on u201CESS u2013 MSS - E-Recruitment & LSOu201D

    Dear All,
    I hope this mail finds you with well spirits.
    I am in the need of a suggestion about u201CSAP ESS u2013 MSS - E-Recruitment & LSOu201D.
    I was working as a SAP HR Functional consultant -Worked for 2.6 years in SAP HR u2013 PA & OM modules u2013 Support Project.
    Then after my plans have got changed & I got into my own venture,which is into International u201CRPO u2013 Recruitment process out sourcingu201Du2026.Am presently working as u201COff shore Account Manager by handling entire Recruitment processu201D from past 3 years..
    Now,Am planning to exclusively specialize & get into "SAP ESS u2013 MSS - E.Recruitment & LSO" by learning it, as a new comer to SAP by holding an extensive 3 Years of Domain experience in Recruiting field & Previous 2.6 Years experience in SAP HR u2013 PA & OM.
    Plz provide your valuable feedback & suggestions for me on this.
    Thanks for your valuable time & consideration.
    Looking forward to receive your valuable feedback & suggestions for me.
    Have a nice day.

    hi satya,
    having knowledge in ESS/MSS along with SAP HR is an added advantage. Since you have a real time expreroance in SAp you can learn these things easily with the help of SDn and sap help. go through the below lins for the switching Ess/Mss from HR
    Hr
    Re: Depth of HR Knowledge for ESS/MSS Portal Consultant
    SAP HR - HCM  ESS/MSS library link
    best regards,
    Mahesh

  • Feedback on record browser implimentation

    Hey guys.
    I am building a next-N record browser system, with a few extra little features. Basically I am going for your classic, type of list, a first button, last button, and then numbered pages that display a certain number of reocords. If there are a lot of pages, it shows just a few in either direction of your current page. I have a working implimentation but it feels rather inefficient. I am looking for any way to optimize this and make it ready for production use. Either way, if you have any feedback (suggestions, critisizm, hell even compliments) please let me know. I do plan on turning this into an Ajax style application once I get all the basics worked out. Thanks!
    You can also see a quick and dirty example of its functionality here:
    http://portal.fpitesters.com/test.cfm
    <cfparam name="url.startrow" default="1" type="numeric">
    <cfparam name="url.display" default="5" type="numeric">
    <cfparam name="url.pagenum" default="1" type="numeric">
    <cfparam name="url.browsesize" default="5" type="numeric">
    <cfoutput>
    <cffunction name="GetRecords">
         <cfquery name="GetFields" datasource="Webserver">
              Select *
              From RespondentEditableFields
         </cfquery>
         <cfreturn GetFields>
    </cffunction>
    <cffunction name="GetRecordsPage">
         <cfargument name="Query" type="query">
         <cfargument name="StartRow" type="numeric" default="1">
         <cfargument name="Display" type="numeric" default="10">
         <cfquery name="GetRecordsPage" dbtype="query" maxrows="#arguments.display#">
              Select *
              From arguments.query
              Where ID >= <cfqueryparam cfsqltype="cf_sql_integer" value="#arguments.startrow#">
         </cfquery>
         <cfreturn GetRecordsPage>     
    </cffunction>
    <cffunction name="RecordBrowser">
         <cfargument name="Query" type="query">
         <cfargument name="Display" type="numeric" default="1">
         <cfset counter = 0>
         <cfset pageNum = 1>
         <cfset PageStarts = arraynew(1)>
         <cfset PageStarts[PageNum] = arguments.query['id'][1]>      
         <cfloop query="arguments.query">
              <cfset counter = counter + 1>
              <cfif counter eq arguments.display>
                   <cfset pageNum = pageNum+1>
                   <cfset PageStarts[PageNum] = arguments.query.id>
                   <cfset counter = 0>
              </cfif>
         </cfloop>
         <cfreturn PageStarts>
    </cffunction>     
    <cffunction name="CreateLinkList">
         <cfargument name="LinkIDArray" required="yes" type="array" hint="An array with the ID's of the records that begin each page">
         <cfargument name="Display" required="no" type="numeric" default="10" hint="How many records to show at per page">
         <cfargument name="StartRow" required="no" type="numeric" default="1" hint="What current row are we on so we know where to start displaying from">
         <cfargument name="PageNumber" required="no" type="numeric" default="0" hint="What current page are we on, so we know which link to bold">
         <cfargument name="BrowseSize" required="no" type="numeric" default="5" hint="How many link on either side of the current one should we show to prevent clutter?">
         <cfsavecontent variable="LinkList">
              <a href="#cgi.scriptname#?startrow=#arguments.LinkIDArray[1]#&display=#url.display#&pagenum=1&browsesize=#arguments.browsesize#"><< </a>
              |
              <cfloop from="1" to="#arraylen(RecordBrowseLinks)#" index="i">
                   <cfif (i-arguments.browsesize) LTE arguments.pagenumber and (i+arguments.browsesize) GTE arguments.pagenumber>
                        <cfif url.pagenum eq i>
                             <strong><a href="#cgi.scriptname#?startrow=#arguments.LinkIDArray[i]#&display=#arguments.display#&pagenum=#i#&browsesize=#arguments.browsesize#">#i#</a></strong> |
                             <cfelse>
                                  <a href="#cgi.scriptname#?startrow=#arguments.LinkIDArray[i]#&display=#arguments.display#&pagenum=#i#&browsesize=#arguments.browsesize#">#i#</a> |
                        </cfif>
                   </cfif>
              </cfloop>
              <a href="#cgi.scriptname#?startrow=#arguments.LinkIDArray[arraylen(RecordBrowseLinks)]#&display=#arguments.display#&pagenum=#arraylen(RecordBrowseLinks)#&browsesize=#arguments.browsesize#">>></a>
         </cfsavecontent>
         <cfreturn LinkList>
    </cffunction>
    <cfset QueryData = GetRecords()>
    <cfset RecordBrowseLinks = RecordBrowser(QueryData,url.display)>
    <cfset GetDisplayableRecords = GetRecordsPage(QueryData,url.startrow,url.display)>
    <cfdump var="#GetDisplayableRecords#">
    <cfset LinkList = CreateLinkList(RecordBrowseLinks,url.display,url.startrow,url.pagenum,url.browsesize)>
    #linklist#
    </cfoutput>

    Hi Gary,
    Thank you for your feedback.
    Currently the behavior of the DSM is when the user is trying to close the
    window or logging off from the portal is to open new window to close all the
    sessions in it.
    This is because the window (in case of closing the window) or the session (in
    case of log off) are about to be terminated.
    Currently we are assessing what will be the best solution for terminating
    the sessions without this popup but it is not easy since changing it require changing
    the all architecture of the DSM which is a huge effort and above all a huge
    risk.
    Thanks for your feedback.
    Ronny Amran.
    AI and DSM
    EP IMS Team leader.

  • Feedback for future versions

    hi, can anyone tell me where i can leave comments for fixes in future versions of aperture?
    thanks
    aidan

    This might be a better way:
    http://discussions.apple.com/thread.jspa?threadID=767741&start=30&tstart=15
    I can be reached at [email protected]
    Feedback, suggestions, feature requests -- even complaints -- are always welcome, of course!
    - Joe

  • ISE installation Suggestion required

    Dear All,
    This is sarveswaran and am working as a network engineer.
    We have recently bought the ISE server and one 2504 WLC and two 3650 WLC.
    Below are the agenda
    Install the access points into the floor on the 3650 WLC and through the ISE authentication should takes place. Also we wanted to restrict the wireless access only to Domain users.
    For Guest users, the authentication should takes place in the ISE. once validated, the guest will need to get the internet from 2504 WLC which we placed into the DMZ Zone. The reason why is to make sure the guest user doesnt want to enter into the network.
    Whether ISE supports NIC redundancy, other than CIMC.
    Expecting your feedback/suggestion and let me know if required any additional information.

    Please refer
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_010011.html
    and
    https://supportforums.cisco.com/discussion/11863271/ise-redundant-nics

  • Your "suggestions for future features" is broken??!!

    I really just wanted to leave you a suggestion for future features. Your system took me to a page that said i needed to be on the most recent version but alas I am! You even tell me so when I go to firefox.com! Hmmmm...... a little problem there.
    Regardless, here is the feature suggestion i wish to make:
    You've done a fine job of cleaning up the top bar in 4.0 to make the most of new widescreen displays so that we have more space for the page content vs. the browser stuff. The deal is, virtually all sites still use only about a third of the page width leaving tons of wasted space on a full screen view. Why don't you offer a way to move all the browser navigation, tabs, and tools wherever i prefer - like running vertically down the left or right side of the massively empty pages i see on my 24" monitor and even my little 11" laptop monitor?

    You can leave your feedback/suggestion at this link: Apple Product Feedback

  • Attach 64TB disk(s) to Azure VMs - please vote up this feature suggestion if you need it too

    http://feedback.azure.com/forums/34192--general-feedback/suggestions/6555737-attach-64tb-disk-s-to-azure-vms
    Each Azure storage account comes with 500 TB of block blob storage capacity. However, this vast storage
    is not available to be used via an Azure VM. 
    The best we can do right now is attach 16x 1TB disks (page blobs) to an A4 or bigger VM. This poses few
    problems: 
    1. 16TB is way too small for many use cases such as using Azure as backup/DR target 
    2. This coupling of storage to RAM/CPU is undesirable and drives enterprise clients to other cloud providers. 
    When will Microsoft provide us the ability to make VHDX 64TB+ files in Azure block blob storage and
    attach them to Azure VMs? 
    Dozens of cloud providers make such functionality available. When will be able to have the same in Azure??
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
    Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

    This is a useful feature. I have voted it. Thanks Sam~~
    Regards,
    Tough_v

  • Nokia Music Player feedback

    Where can i post Nokia Music Player issues, problems, feedback, suggestions, etc...??????????

    Okay, so it's been around more than a week since the release of Justin Bieber's next PYD which has yet not been updated in the store. I mean i would surely not like to spend money on a Music Player who doesn't upload latest songs in it including One Direction Midnight Memories album. I seriouslly expected more from u NOKIA

Maybe you are looking for