Feedback thread for "How To Design a SAP NetWeaver - Based System Landscape

I have just published a RIG How To Guide called [How To Design a SAP NetWeaver - Based System Landscape|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50a9952d-15cc-2a10-84a9-fd9184f35366]. You can read my [blog |http://www.sdn.sap.com/?blog=/cs/weblog/view/wlg/8877]on it. This thread is collect feedback and discussion on the Guide.

Hi Matt!
This is definitely interesting reading and a lot of projects I've been in could have benefitted from it had it been carefully read beforehand by some of the involved parties.
What I like especially is the fact that this is not only for technical consultants (who should know about most of these things anyway) but for the people closer to the business who need to find agreements with the technical guys.
Good job...
Jörg
Some comments to what I read:
I noticed that you use the term 'server virtualization' (section 3.3.1) quite generally. Maybe it would be worth introducing the term 'server consolidation' (which you use later in the document) already in this early chapter. My experience shows that (especially recently) a lot of customers are interested in 'virtual servers' (meaning a virtual server with an OS installed separately), not really knowing what they're talking about and often better advised to use 'server consolidation' (one OS, many SIDs). These two concepts are similar in terms of sharing hardware resources, but quite different in terms of the implications toward administration.
In section 4.2.1.3 you mention (in brackets) the Usage type to which the client belongs for the Business Explorer and the J2SE Adapter Engine if I understood that correctly. There is no UT mentioned for the other clients and there is no explanation on what the bits in brackets are supposed to mean. (I first expected the 'BeX' abbreviation when I saw something in brackets...)

Similar Messages

How to install the SAP Netweaver tools

Dear Friends,
I want to develop applications thro SAP Netweaver Tools. Can any one guide me thro installation process, since I am new to Netweaver. Where do i get the software. Pls help.
Regards,
Shankaran J
+91 98404 61721

HI
Hi,
You can download NWDS from this link
https://www.sdn.sap.com/irj/sdn?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
Refer the thread for more information
Re: Where "SAP Netweaver Developer Studio 2.0"?
For Development refer these links
NETWEAVER
http://help.sap.com/saphelp_nw04/helpdata/en/30/c4461ff69d5a438f1286e344b545fa/frameset.htm
PORTAL
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
DEVELOPMENT MANUAL
http://help.sap.com/saphelp_nw04/helpdata/en/6a/50c0b26e2543a2984dcd518e26dc65/frameset.htm

How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

Hi Experts,
I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
GRC 10.0 only work on NW7.02,we now have NW7.01.
How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
Use EHPI tools or just spam/saint or any other way ?
current version:
SAP_ABA 701 0006 SAPKA70106
SAP_BASIS 701 0006 SAPKB70106
PI_BASIS 701 0006 SAPK-70106INPIBASIS
SAP_01 0006 BW SAPKW70106
Thanks!

HI,
Net wevaer 7.2 CE is totally different from Net weaver 7.01.
No relation i feel.kindly check the links.
http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
http://help.sap.com/content/documentation/netweaver/index.htm
OR
You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
*Regards,
Ajitabh

结束了.SAP免费讲座-Crystal Dashboard Design(Xcelsius)和SAP NetWeaver BW的集成

SAP讲座u2014u2014Crystal Dashboard Design(Xcelsius)和SAP NetWeaver BW的集成
时间：2010年7月21日下午2点u2014u20144点
地址：[点击这里参加|http://www.bestsapchina.com/Events.aspx?eventId=20106&utm_source=webinar-os&utm_medium=sdn&utm_term=hmp&utm_content=D2062&utm_campaign=webinar&utm_type=&utm_feature=&srcid=1_0-0-0_0-0-0_3XCS6]
演讲人：车骏 2006年加入SAP任职SAP资深软件开发工程师，主要负责研发企业级数据集成和SAP BW集成模块，具有丰富的BO产品实施和性能优化经验。
介绍Xcelsius与SAP NetWeaver BW （数据仓库）集成的技术架构和实际应用。
Edited by: Shengtao Tan on Jul 21, 2010 11:51 AM
Edited by: Shengtao Tan on Jul 21, 2010 3:12 PM

Thanks Eric,
The statement from the Roadmap and the Faq are politically correct,SAP says they will stop the future develoment or would be limited ,its like reading between the lines in particular this quote
"Projects requiring an Excel OLAP Integration should be carried out with BEx Analyzer 7.0. The tool is safe for 8+ years, and customers will be able to upgrade to Pioneer Excel. "
Hope it Helps
Chetan
@CP..

How to Create a SAP R/3 system in system configuration

Hi,
i am new to EP Any body tell me how to Create a SAP R/3 system in system configuration.Thanks in advance.
Thanks
kiran.B

Hi Kiran,
To create SAP R3 System follows this steps :
in system landscape
(1)create new system
(2)select SAP system using dedicated application server
(3)give system name and id
(4)finish
(5)open system and set following properties
     Connector
     - App. Host              : r3 server name
     - Gateway Host        :
     - SAP client             :
     - SAP System Name:
     - SAP System No.    :
     - Server Port             : 3200 (Default)
     - System Type
     - give system Alias
     User Management
     - Logon Method
                  UIDPW

Connecting SAP NetWeaver BI System to Visual Composer via BICS

Hy, i find on service.sap.com the possibility to connect SAP NetWeaver BI System with Visual Composer by BICS. What's BICS?and how can create this connection?
Thank's a lot.
Sincerely yours.
Andrea Maraviglia

Hi Neil,
See https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37 (troubleshooting guide): Kernel dump while generating Web Services and Simple Transformation (XSLT) and problems when upgrading the NSP system from SP8 to SP9.
Download the patch (two files) and overwrite the existing ones with them - that solved the problem for me. This is a direct link to the zipfile:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/business_packages/a1-8-4/bugfixdbdriverfornspsystem.zip
brgds
Søren

How to create web service for a Java class in SAP NetWeaver Studio

hi all,
i am using SAP Netweaver Developer Studio.have created a normal java project and i want to create web service for one of the classes in this project. i used the Web Service Creation Wizard to create a web service for this class. but it says there's no methods available for VI. all my methods in this class are public, what should i do?

Hi,
I guess there are other ways. But this is an easy way, if you find the right wizards.
Besides this it is good practise to define interface methods so that session bean implement these interface methods, and thus seperate the interface from the implementation.
In this approach you will need 3 projects:
An enterprise application project (will contain EJB Module)
An EJB Module project (will contain session bean)
A Java project (contains code that implements the session bean methods)
In my previous post I suggested to use a J2EE web mudule project. This was a mistake, it should be EJB module.
But it should be possible to do it in another way. It is up to you.
Good luck, Roelof

Standard XML schema for Vendor data exchange between SAP and other system

Is there a SAP standard way of XML schema that we exchange between SAP and other system? Please let me know.
Thanks.

See SAP Interface Repository (http://ifr.sap.com).
My proposal is to leave old SAP connectors staff and use SAP Exchange Infrastructure. There is a support of industry XML standards in XI 3.0 like xCBL.

How can I realize redundant PXI based system?

Hello,
I have to impliment a redundant PXI based system for my application. The System should have 64 channel DIO, 16 channel ADC, 8 channel RS232(redundant), 8 channel DAC.
Overall the system must have redundancy at power supply level, Processor level, communication level, and also at software level.
Can anybody please help me in configuring such a system on PXI or any other NI products? Dual redundant ethernet ports, and redundant processor based systems highly preffered. The system realization model figures will help me more. If any further technical information is required in this regard also I will provide. Please help me in this regard.
Thanks and regards,
A.D.M.Rao

Hello Mr. Brooks,
Thank you for your last reply. I have gone through the following link as you refered.
http://forums.ni.com/ni/board/message?board.id=170&message.id=37638&requireLogin=False
We are interested to impliment the heart beat system. So, please send me how to impliment this system using my earlier inputs to you. I request you to help me in configuring our system for redundancy.
Please send me the detailed information in this regard.
Looking forward for your reply.
With regards,
A.D.M.Rao

How to configure in Charm in three system landscape

Hi Experts
I want to configure the charm in the three system landscape system. Please help me to configure
Thanks & Regards

It is same whether it is two or it is three system landscape, i guess you already must have gone through the following
charm setup
Re: Can Any one Provide Step by Step Config of CHARM??
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/charm-in-2tier-system-1231210

How to remove duplicate server entries in System Landscape

Hi there, in our SSM 4.0 system landscape (SMSY), there are duplicate server entries (one in lowercase, the other in uppercase). How do you remove the duplicate entries, as whenever you try to delete, say, the uppercase server entry, the system tells you that it is being used in a solution etc? Thus, even though the server entries are in different cases, it still views them as the same server entry, and you cannot delete one or the other.

Hello Bernardt,
In smsy there is an icon "Where is used".
I suppose you speak about a server that has been created in lowercase and again in uppercase. Until you don´t "clean" logical component, project, solution you are not going to be able to delete the entry.
At least usually I follow this path. I don´t think there is a most "automatic" way, but who knows
Best regards,
Dolores

Feedback Thread for MX200

Please use this thread to provide any feedback for firmware MU02 for MX200.
Firmware revision MU02 for the Crucial MX200 (all form factors) is now available. This firmware update applies to the MX200 SSD (all form factors), and should not be applied to any other Crucial SSD model.
Visit this page to download the firmware update: http://www.crucial.com/support/firmware.aspx
Release Date: 07/14/2015
Improved Read Performance on small address spans
Improved Random Write performance on transfers not aligned to 4KB address boundaries
Improved Acceleration Capacity Recovery after TRIM and SANITIZE commands
Added Informative SMART thresholds for Attributes 202 and 5
Added Support for READ DMA BUFFER, WRITE DMA BUFFER, and DOWNLOAD MICROCODE DMA Commands
Bug Fixes and Stability Improvements
Additional details can be found in the firmware guide

Before degradation: EventDataBootTsVersion 2
BootStartTime 2015-07-20T10:44:16.763282500Z
BootEndTime 2015-07-20T10:45:55.602469800Z
SystemBootInstance 65
UserBootInstance 62
BootTime 24652
MainPathBootTime 9352
BootKernelInitTime 27
BootDriverInitTime 367
BootDevicesInitTime 1394
BootPrefetchInitTime 0
BootPrefetchBytes 0
BootAutoChkTime 0
BootSmssInitTime 3050
BootCriticalServicesInitTime 244
BootUserProfileProcessingTime 171
BootMachineProfileProcessingTime 452
BootExplorerInitTime 2946
BootNumStartupApps 26
BootPostBootTime 15300
BootIsRebootAfterInstall false
BootRootCauseStepImprovementBits 0
BootRootCauseGradualImprovementBits 0
BootRootCauseStepDegradationBits 0
BootRootCauseGradualDegradationBits 0
BootIsDegradation false
BootIsStepDegradation false
BootIsGradualDegradation false
BootImprovementDelta 0
BootDegradationDelta 0
BootIsRootCauseIdentified false
OSLoaderDuration 443
BootPNPInitStartTimeMS 27
BootPNPInitDuration 1608
OtherKernelInitDuration 134
SystemPNPInitStartTimeMS 1736
SystemPNPInitDuration 239
SessionInitStartTimeMS 1982
Session0InitDuration 1623
Session1InitDuration 94
SessionInitOtherDuration 1333
WinLogonStartTimeMS 5033
OtherLogonInitActivityDuration 750
UserLogonWaitDuration 323 And after:
BootTsVersion 2
BootStartTime 2015-07-20T11:50:56.903944300Z
BootEndTime 2015-07-20T11:53:55.942009700Z
SystemBootInstance 66
UserBootInstance 63
BootTime 112728
MainPathBootTime 90228
BootKernelInitTime 27
BootDriverInitTime 365
BootDevicesInitTime 1914
BootPrefetchInitTime 0
BootPrefetchBytes 0
BootAutoChkTime 0
BootSmssInitTime 3074
BootCriticalServicesInitTime 89
BootUserProfileProcessingTime 169
BootMachineProfileProcessingTime 386
BootExplorerInitTime 83554
BootNumStartupApps 27
BootPostBootTime 22500
BootIsRebootAfterInstall false
BootRootCauseStepImprovementBits 0
BootRootCauseGradualImprovementBits 0
BootRootCauseStepDegradationBits 0
BootRootCauseGradualDegradationBits 0
BootIsDegradation false
BootIsStepDegradation false
BootIsGradualDegradation false
BootImprovementDelta 0
BootDegradationDelta 0
BootIsRootCauseIdentified false
OSLoaderDuration 445
BootPNPInitStartTimeMS 27
BootPNPInitDuration 2119
OtherKernelInitDuration 155
SystemPNPInitStartTimeMS 2269
SystemPNPInitDuration 240
SessionInitStartTimeMS 2515
Session0InitDuration 1621
Session1InitDuration 95
SessionInitOtherDuration 1356
WinLogonStartTimeMS 5589
OtherLogonInitActivityDuration 528
UserLogonWaitDuration 256
The problem seems to be BootExplorerInitTime . I would reinstall Win 8.1 but the next week I hope to change my pc to Windows 10 so I will wait and see if this can be fixed on this way.
Thanks a lot bogdan.
Best regards.

How to debug in SAP Netweaver Developers Studio?

Hi there,
I am trying to debug and slove my error in SAP NWDS.
I am building portal application->JSPDynPage
I am trying to debug the jsp code behind page, it doesn't realli give error message like the java beans does.
I am quite new to this and do not know how to set the function to test and debug this page can anyone provide any solution ?
I have have this prob pls refer to this link
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=192104">https://www.sdn.sap.com/irj/sdn/thread?threadID=192104</a>
Thanks loads
Quatre

Hi Quatre ,
-Select the breakpoints in your Dynpages /beans in ur project
-To debug u have to change the prespective to debug which u can find in
window/open prespective /Debug in NWDS
-Select the Run/Debug or the Debug icon in the toolbar.
-Fill the project name ,application name in the in the wizard opnend .
- Follow the debugging using the next step over F6 ,step return F7 keys .
These link may be helpful:
http://help.sap.com/saphelp_nw2004s/helpdata/en/66/547f09281d464b951c9a3a6b06a12d/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/def86ab54da5418a3575373934ca00/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d4/31e24044b80b06e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/cffcb407c67842b122bd1296dc810f/frameset.htm
U can always find out the way in the PDK development /how to debug/
ie in NWDS /HELP /SAP WAS AS Documentation /SAP J2ee Enterprise Java Beans/Java development User Guide /Running and Debugging
Cheers,
Swathi Rao
Do offer pts:-)

How to extend my SAP NetWeaver 2004s Trial Version license ?

Hi All,
I am new to the netweaver, thought i had installed the system some time back, now the license of the trial version has expired and i want to know how can i go about extending the trial version license. Or do i have to go through all the pain of installing the system again. Please help me out.
Cheers,
Sudheer Alladi.

No. You can send a request again with your Hardware Key on the below given ink and you will get your license.
[License Renew|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm]
Regards,
Subhash

SSO to mulitple SAP GUI based systems in the Portal

Hi Experts,
I need to create links for multiple SAP Systems (based on the SAP GUI) in the portal and implement SSO for them. Can someone tell me where and how to place these links in the portal? Is there a standard approach for this, like a "Systems" iview or something?
Regards,
Shobhit

Hi,
So have you created 5 diiferent systems on Portal corresponding to your backend systems :
SAP ERP Dev
SAP ERP Qua
SAP ERP Prd
SAP CRM Dev
SAP SEM Dev
Once you create the systems and the alias to these systems, you can create 5 iviews, one for each of these systems using SAP transaction iviews. The transaction code could be S000.
To learn how to create systems and SAP Transaction iviews, use these links :
Creating system : http://help.sap.com/saphelp_nw70/helpdata/en/ec/0fe43d19734b5ae10000000a11405a/content.htm
Editing system -> Editing SAP System properties http://help.sap.com/saphelp_nw70/helpdata/en/42/11e43d19734b5ae10000000a11405a/frameset.htm
The above links should help you create SAP systems and their aliases.
Then you need to create SAP Transaction iviews:
http://help.sap.com/saphelp_nw70/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm
To open these iviews as a pop-up or in a new window, set the following property for each of these iviews in the property category "Drag and Relate" : Launch in New Window = Display in separate window.
Set the permission Read for Group Everyone for each of these iviews.
Hope this helps.
Cheers,
Sunil

Feedback thread for "How To Design a SAP NetWeaver - Based System Landscape

Similar Messages

Maybe you are looking for