Feedback Thread for MX200

Please use this thread to provide any feedback for firmware MU02 for MX200.
Firmware revision MU02 for the Crucial MX200 (all form factors) is now available. This firmware update applies to the MX200 SSD (all form factors), and should not be applied to any other Crucial SSD model.
Visit this page to download the firmware update: http://www.crucial.com/support/firmware.aspx
Release Date: 07/14/2015
Improved Read Performance on small address spans
Improved Random Write performance on transfers not aligned to 4KB address boundaries
Improved Acceleration Capacity Recovery after TRIM and SANITIZE commands
Added Informative SMART thresholds for Attributes 202 and 5
Added Support for READ DMA BUFFER, WRITE DMA BUFFER, and DOWNLOAD MICROCODE DMA Commands
Bug Fixes and Stability Improvements
Additional details can be found in the firmware guide

Before degradation: EventDataBootTsVersion 2
BootStartTime 2015-07-20T10:44:16.763282500Z
BootEndTime 2015-07-20T10:45:55.602469800Z
SystemBootInstance 65
UserBootInstance 62
BootTime 24652
MainPathBootTime 9352
BootKernelInitTime 27
BootDriverInitTime 367
BootDevicesInitTime 1394
BootPrefetchInitTime 0
BootPrefetchBytes 0
BootAutoChkTime 0
BootSmssInitTime 3050
BootCriticalServicesInitTime 244
BootUserProfileProcessingTime 171
BootMachineProfileProcessingTime 452
BootExplorerInitTime 2946
BootNumStartupApps 26
BootPostBootTime 15300
BootIsRebootAfterInstall false
BootRootCauseStepImprovementBits 0
BootRootCauseGradualImprovementBits 0
BootRootCauseStepDegradationBits 0
BootRootCauseGradualDegradationBits 0
BootIsDegradation false
BootIsStepDegradation false
BootIsGradualDegradation false
BootImprovementDelta 0
BootDegradationDelta 0
BootIsRootCauseIdentified false
OSLoaderDuration 443
BootPNPInitStartTimeMS 27
BootPNPInitDuration 1608
OtherKernelInitDuration 134
SystemPNPInitStartTimeMS 1736
SystemPNPInitDuration 239
SessionInitStartTimeMS 1982
Session0InitDuration 1623
Session1InitDuration 94
SessionInitOtherDuration 1333
WinLogonStartTimeMS 5033
OtherLogonInitActivityDuration 750
UserLogonWaitDuration 323 And after:
BootTsVersion 2
BootStartTime 2015-07-20T11:50:56.903944300Z
BootEndTime 2015-07-20T11:53:55.942009700Z
SystemBootInstance 66
UserBootInstance 63
BootTime 112728
MainPathBootTime 90228
BootKernelInitTime 27
BootDriverInitTime 365
BootDevicesInitTime 1914
BootPrefetchInitTime 0
BootPrefetchBytes 0
BootAutoChkTime 0
BootSmssInitTime 3074
BootCriticalServicesInitTime 89
BootUserProfileProcessingTime 169
BootMachineProfileProcessingTime 386
BootExplorerInitTime 83554
BootNumStartupApps 27
BootPostBootTime 22500
BootIsRebootAfterInstall false
BootRootCauseStepImprovementBits 0
BootRootCauseGradualImprovementBits 0
BootRootCauseStepDegradationBits 0
BootRootCauseGradualDegradationBits 0
BootIsDegradation false
BootIsStepDegradation false
BootIsGradualDegradation false
BootImprovementDelta 0
BootDegradationDelta 0
BootIsRootCauseIdentified false
OSLoaderDuration 445
BootPNPInitStartTimeMS 27
BootPNPInitDuration 2119
OtherKernelInitDuration 155
SystemPNPInitStartTimeMS 2269
SystemPNPInitDuration 240
SessionInitStartTimeMS 2515
Session0InitDuration 1621
Session1InitDuration 95
SessionInitOtherDuration 1356
WinLogonStartTimeMS 5589
OtherLogonInitActivityDuration 528
UserLogonWaitDuration 256
The problem seems to be BootExplorerInitTime . I would reinstall Win 8.1 but the next week I hope to change my pc to Windows 10 so I will wait and see if this can be fixed on this way.
Thanks a lot bogdan.
Best regards.

Similar Messages

Feedback thread for "How To Design a SAP NetWeaver - Based System Landscape

I have just published a RIG How To Guide called [How To Design a SAP NetWeaver - Based System Landscape|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50a9952d-15cc-2a10-84a9-fd9184f35366]. You can read my [blog |http://www.sdn.sap.com/?blog=/cs/weblog/view/wlg/8877]on it. This thread is collect feedback and discussion on the Guide.

Hi Matt!
This is definitely interesting reading and a lot of projects I've been in could have benefitted from it had it been carefully read beforehand by some of the involved parties.
What I like especially is the fact that this is not only for technical consultants (who should know about most of these things anyway) but for the people closer to the business who need to find agreements with the technical guys.
Good job...
Jörg
Some comments to what I read:
I noticed that you use the term 'server virtualization' (section 3.3.1) quite generally. Maybe it would be worth introducing the term 'server consolidation' (which you use later in the document) already in this early chapter. My experience shows that (especially recently) a lot of customers are interested in 'virtual servers' (meaning a virtual server with an OS installed separately), not really knowing what they're talking about and often better advised to use 'server consolidation' (one OS, many SIDs). These two concepts are similar in terms of sharing hardware resources, but quite different in terms of the implications toward administration.
In section 4.2.1.3 you mention (in brackets) the Usage type to which the client belongs for the Business Explorer and the J2SE Adapter Engine if I understood that correctly. There is no UT mentioned for the other clients and there is no explanation on what the bits in brackets are supposed to mean. (I first expected the 'BeX' abbreviation when I saw something in brackets...)

Suggestion: A General Feedback Thread

May I kindly suggest a general thread for feedback on Apple users' experiences? i.e. a place where we will be able to share our pleasant experiences and how we are able to help improve the users' experiences.

I think TU's have access to the front page news. It's on the dev dashboard but I've never had a reason to edit it so I've never tried.
The front page news is used to warn about breakage and other general nastiness that would perturb an otherwise smooth upgrade but not everyone will agree on what merits mention on that page. A forum thread take less effort to update and would probably have a lower threshold for matters of disputable importance.
My point though is that major breakage (big problems, affects many users) will be reported on the front page. Problems which are less severe or less widespread will appear on the forums in threads about the issue which will also contain suggestions and solutions. The whole point of your suggestion is to make people aware of pending issues and I believe that the current system does this. You should check the front page before updating anything important and you should take a quick peek at the forum. Any issue that is likely to affect you will have affected others and the related thread(s) will be relatively active and apparent.
Thinking about it more though it would essentially be a news aggregator. It would be possible to subscribe to the topic and receive emails notifications. It would also be possible keep a clear record of issues for anyone arriving after the fact.
Meh, overall I see the benefits but I don't know if they're worth it. It amounts to maintaining a sign with all the newspaper headlines right next to the news stand where you can read all of the headlines directly. It might be a bit more visible from a distance and let some random passer-by know what the big issue of the day is, but at the same time anyone who actually cares would have come by to read it first-hand.
You also have to consider that this has the air of novelty and that's usually frowned upon in established settings.
*withdraws any opinion he may have given and sits down to see where this goes*

I get two message threads for one contact. One for sms and one for iMessage since I updated to iOS 7. How can I get them both into one thread?

Ever since I upgraded to iOS7 just two of my contacts I get two message threads for them. One containing their iMessages to me and the other with just regular sms messages. In Contacs, their email and phone number are saved under one name. How can I get the iMessages and sms to come through under one thread in my messaging app again?

I am having this trouble also, my partner creates a new message to send to me, or sends a picture and it always comes through as an MMS and not using iMessage ...
will try deleting everything and starting again!

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Suggestions thread for ABAP FAQ sticky

See these threads for "online collections" in the ABAP Development forums =>
FAQ's, intros and memorable discussions in the ABAP General Forum
FAQ's, intros and memorable discussions in the ABAP Data Dictionary Forum
FAQ's, intros and memorable discussions in the ABAP UI Programming Forum
FAQ's, intros and memorable discussions in the ABAP Form Printing Forum
FAQ's, intros and memorable discussions in the Enhancements & Modifications
FAQ's, intros and memorable discussions in the Performance and Tuning Forum
FAQ's, intros and memorable discussions in the Data Transfers Forum
FAQ's, intros and memorable discussions in the ABAP Objects Forum
Edited by: Julius Bussche on Apr 21, 2009 5:22 PM

ABAP General
Subtotals in alv list. => Subtotals in ALV <= Added and moved to UI programming
Can we modify a sub-total in ALV => Subtotals text in ALV /Modification of Subtotals in ALV <= Moved down to new thread.
cl_salv_table - Save Layout => ALV OM Save layout option <= Moved down to new thread.
Report with page break. => ALV Report with page break. <= Moved down to new thread.
ALV Sorting Not Working after Adding Checkbox to ALV => ALV Sorting and Group Functionality working with Checkbox <= Moved down to new thread.
Calculating Total with Checkbox in ALV Grid => Calculating Total with Checkbox in ALV Grid <= Moved down to new thread.
DUMP WHILE SUMMATION IN ALV => General Fieldcatalog error. <= Moved down to new thread.
Problems with REUSE_ALV_FIELDCATALOG_MERGE =>Problems with REUSE_ALV_FIELDCATALOG_MERGE <= Moved down to new thread.
Must i_structure_name for LVC_FIELDCATALOG_MERGE be pre-defined in dict? => Converting SLIS fieldcatalog to LVC fieldcatalog <= Moved down to new thread.
Capture Checkbox Value in ALV Grid => Capturing the editable fields values in ALV <= Moved down to new thread.
how to refresh table display using slis and 'reuse_alv_grid_display method. => Refreshing the ALV Display <= Moved down to new thread.
fetch data in edittable field in alv using REUSE_ALV_GRID_DISPLAY_LVC FM => Reading the editable values for ALV LVC function <= Moved down to new thread.
Radibutton in ALV Report output => Radio buttons in ALV report <= Moved down to new thread.
Edit rows in ALV => Usage of Styles in ALV for disable/enable input option <= Moved down to new thread.
how to copy/delete file => executing Unix commands <= Hmmm... c-calling the 'system' does not work in my systems during normal operations. See system param 'rdisp/call_system' which can be disabled, then the code dumps. Is there a different thread with DATASET commands? SXPG?
express CR_LF => ABAP char Utilities CR_LF use , replace '##' in a application server <= Ahhh yes, I remember this series. This is one of the nicer threads from it... Added.
String Operations which contain the special character '#' in BDC Session => ABAP char Utilities Horizontal_tab use , replace '#' in application server file <= Sufficiently covered by the next thread.
Problem with statement "find all occurences of ..." => ABAP char utilites Newline, replace '#' in application server in end of line <= Added.
How to Send Email to Outlook? =>sending mails to outlook <= Added.
FM for uploading Image to SAP => upload image to mime repository <= Added.
Passing an Internal Table to a Report executed through 'Submit' => use of Import and export refer Rich Heilman's code <= Added.
Create a parameter to enter a password => Selection parameter password behaviour <= Added.
ABAP Dictionary
=>
Form Printing
Exporting Graphics from SAP =>Download Logo from SE78 <= Okay, added... but the thread is rather old and ws_download is obsolete now, isn't it?
BDC for SE78 Transaction => Upload Logo programatically <= Hmmm... external performs and guests. I would like more opinions on this one before adding.
UI Programming
[Top of page in OO ALV|TOP_OF_PAGE in ALV Using CL_GUI_ALV_GRID ]=> Top of page in OO ALV <= I understand that this blog was very helpfull, but it is full of email addresses. Hmmm.. tough call Is there another example (thread) without any "here is my mail address" comments. We want to avoid those.
[Top of page Alignments in Normal ALV|Alignment of Data in TOP-OF-PAGE in ALV GRID] => Top of page in normal ALV <= this is more wiki material in a blog, but again often asked... Hmm.. lets go through the others first and come back to this one.
To display URL as a hyperlink (along with simple text) in dialog program => URL display using HTML Viewer <= Added.
select-option on dynpro => Select-options usage in Module pool programming <= Added.
New! =>
Enhancements and Modifications
=>
ABAP Performance and Tuning
=>
Data Transfers
=>
ABAP Objects
=>
Edited by: Julius Bussche on Oct 3, 2008 10:31 PM
Edited by: Julius Bussche on Oct 3, 2008 10:34 PM
Edited by: Julius Bussche on Oct 3, 2008 10:38 PM
Edited by: Julius Bussche on Oct 3, 2008 10:43 PM
Edited by: Julius Bussche on Oct 3, 2008 10:55 PM
Edited by: Julius Bussche on Oct 4, 2008 12:06 AM
Edited by: Julius Bussche on Oct 4, 2008 12:40 AM
Edited by: Julius Bussche on Oct 4, 2008 12:57 AM
Edited by: Julius Bussche on Oct 4, 2008 1:23 AM
Edited by: Julius Bussche on Oct 4, 2008 3:27 PM
Edited by: Julius Bussche on Oct 4, 2008 3:39 PM
Edited by: Julius Bussche on Oct 4, 2008 5:40 PM
Edited by: Julius Bussche on Oct 4, 2008 5:59 PM
Edited by: Julius Bussche on Oct 4, 2008 7:17 PM

How to run a thread for second time ?

I have a written a ThreadPool, but I found that basically a thread is not running for the second time. i.e First i call run() method and call stop(). If i call again run() method for the same thread, it is not running. What should I do, If i want to run the thread for the second time ?
class NewThread implements Runnable {
String name;
NewThread(String a) {
name=a;
public void run() {
try{
for(int i=0;i<5;i++) {
System.out.println("Thread :" + name + " #" +i);
Thread.sleep(5);
catch (Exception e) {
e.printStackTrace();
class threadRunnableTest {
public static void main (String args[]) {
Runnable runnable=new NewThread("BaSkAr");
Thread thread = new Thread(runnable);
try{
System.out.println("First Thread is starting !!!");
thread.start();
Thread.sleep(2000);
System.out.println("First Thread it to be stopped!!");
thread.stop();
System.out.println("Second Thread is starting !!!");
thread.start();
Thread.sleep(2000);
System.out.println("Second Thread it to be stopped!!");
thread.stop();
catch (Exception e) {
e.printStackTrace();

baskark wrote:
I have a written a ThreadPool, but I found that basically a thread is not running for the second time. i.e First i call run() method and call stop(). If i call again run() method for the same thread, it is not running. What should I do, If i want to run the thread for the second time ?
class NewThread implements Runnable {
String name;
NewThread(String a) {
name=a;
public void run() {
try{
for(int i=0;i<5;i++) {
System.out.println("Thread :" + name + " #" +i);
Thread.sleep(5);
catch (Exception e) {
e.printStackTrace();
class threadRunnableTest {
public static void main (String args[]) {
Runnable runnable=new NewThread("BaSkAr");
Thread thread = new Thread(runnable);
try{
System.out.println("First Thread is starting !!!");
thread.start();
Thread.sleep(2000);
System.out.println("First Thread it to be stopped!!");
thread.stop();
System.out.println("Second Thread is starting !!!");
thread.start();
Thread.sleep(2000);
System.out.println("Second Thread it to be stopped!!");
thread.stop();
catch (Exception e) {
e.printStackTrace();
It's usually helpful to check the documentation:
[http://java.sun.com/javase/6/docs/api/java/lang/Thread.html#start()|http://java.sun.com/javase/6/docs/api/java/lang/Thread.html#start()]
start
public void start()Causes this thread to begin execution; the Java Virtual Machine calls the run method of this thread.
The result is that two threads are running concurrently: the current thread (which returns from the call to the start method) and the other thread (which executes its run method).
It is never legal to start a thread more than once. In particular, a thread may not be restarted once it has completed execution.
So, make a new java.lang.Thread

How is it possible to make sure that LV uses the same thread for several threadsafe DLL calls?

Hello,
i have a thread safe DLL and most functions are called from serveral threads from the LV apllication without problems.
In case of an error i have to call an error handler function in this DLL (like WinAPI: GetLastError()) from the same thread which has called the function that failed before.
I can't use the user interface execution because some functions need a long execution time and i don't want to balk the user interface.
All other executions than the user interface execution have more than one thread and in most cases the DLL function calls were executed from different threads - so the error handling doesn't work...
Any idea?
Thanks for your help!

Hmmm....
How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
"Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
Not sure on the above.
Please correct me if this is wrong!
Ben
Message Edited by Ben on 07-19-2007 08:26 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Number of threads for imap process

What is the resonable nimber of threads for imap procerss?
I have 2 impad procrss and number of threads more then 200!!!
I think this is to much for 700-900 concurrent impa connection&
What is the reasons for this big number

Actually, your configuration sounds pretty close to correct for your load.
We allocate up to 250 threads, as many clients connect more than one time per session, and open more than one folder at a time.
I would not mess with the number of threads.
If most of your users have small numbers of messages and folders, you may be able to get away with a single imap process, but if you have several processors, two is fine, too.
Is there a problem or error situation you're trying to work around? What exact version of Messaging do you use? (imsimta version gets that)

Running a thread for a specified time

my main program has 10 threads. i want to run each thread for 30 secs . but if one thread is on progress it may be allowed some time to complete its task otherwise evrbody should return after 30 secs.how can i do it ?
thankx

code is hanging...
also how do i do >>if one thread is on progress it may be allowed some time to complete its task otherwise evrbody should return after 30 secs
class Shared
boolean stop=false;
// do nothing but helps only for synchronisation
class ThreadProducer1 extends Thread
{ Shared obj;
 public void run()
 { long endTime = System.currentTimeMillis() + 30 * 1000;
 long currentTime;
 for (int k=0;k<1000;k++)
 {System.out.println("thread1"); // doing its work
 currentTime=System.currentTimeMillis();
 if (currentTime>endTime) break;
class ThreadProducer2 extends Thread
{ Shared obj;
 public void run()
 { long endTime = System.currentTimeMillis() + 30 * 1000;
 long currentTime;
 for (int k=0;k<1000;k++){
 System.out.println("thread2"); // doing its work
 currentTime=System.currentTimeMillis();
 if (currentTime>endTime) break;} // doing its work
class ThreadProducer3 extends Thread
{ Shared obj;
 public void run()
 { long endTime = System.currentTimeMillis() + 30 * 1000;
 long currentTime;
 for (int k=0;k<1000;k++)
 System.out.println("thread 3"); // doing its work
 currentTime=System.currentTimeMillis();
 if (currentTime>endTime) break;
 } // doing its work
class Test
public static void main(String argv[])
 try{
 ThreadProducer1 t1 = new ThreadProducer1();
 ThreadProducer2 t2 = new ThreadProducer2();
 ThreadProducer3 t3 = new ThreadProducer3();
 t1.start();
 t2.start();
 t3.start();
 Thread.sleep(30000); // main thread wakes up after 30 secs.
 }catch (InterruptedException ex)
 System.out.println("exception");

Feedback Form for SAP NetWeaver Gateway development tools

Hi all, if you wish to send your feedback (bug, new feature, and general feedback) to SAP NetWeaver Gateway development tools u2013 Xcode, Visual Studio, Blackberry, Search console, please use the attached feedback forms:
For Xcode and Visual Studio tools please use Feedback form XC&VS.rtf
For Eclipse, Blackberry and Search console please use Feedback form BB&SC.rtf

Hi Michal,
While installing the Netweaver gateway plugin for eclipse Juno version through the following link
https://tools.hana.ondemand.com/juno under Help -> Install New Software... I have encountered below error.
Can you please help me in resolving it.
An error occurred while collecting items to be installed
session context was:(profile=epp.package.jee, phase=org.eclipse.equinox.internal.p2.engine.phases.Collect, operand=, action=).
Unknown Host: https://tools.hana.ondemand.com/juno/features/com.sap.core.editor.feature_1.0.6.jar
tools.hana.ondemand.com
Many thanks in advance.
Regards,
Parthi

Is there a separate discussion thread for educators using ibook?

Many of us in higher education are trying to use ibooks as text or as lab manuals. Are there discussion threads for the particular ibook issues teachers/instructors/professors might come across? Thank you.

No, unless you are into the production of ebooks, then there are forums at
https://discussions.apple.com/community/books?view=discussions

Thread for USA Payroll

Please let me know the thread for USA Payroll??
So that i can post questions

i moved your thread to US forum u can post your queries here

Help with Threads for a webserver

That is the main class of my webserver. The problem is that after executing one petition the server closes with exit status 1. Normally that should never happens as it does not happen at the single-threaded server. Any suggestions ??
Also do i have to impement monitors, meaning syncronized functions to monitor buffers and some static variables ?
This is my first program impementing threads so really i do not experience over it
package jhttp_server;
import java.io.*;
import java.net.*;
import java.lang.*;
* Title: JHTTP_server
* Description: A simple HTTP server implemented with Java
* Copyright: Copyright (c) 2004 - Lisenced under GPL
* Company: Universidad Rey Juan Carlos
* @author Panayiotis Papadopoulos -> [email protected]
* @version 0.1
public class jserver {
static ServerSocket serverSocket = null;
static PrintWriter out;
static BufferedReader in;
static Socket client = null;
static short i=0;
static int port;
static boolean newSock=true;
public static void main(String[] args) throws IOException {
port = Integer.valueOf(args[0]).intValue();
try {
serverSocket = new ServerSocket(port);
catch (IOException e) {
System.out.println("Must Enter a port number");
System.out.println("|------------------------------------------------------------------------|");
System.out.println("|JHTTP Server initialized and accepting connections on port:" +
serverSocket.getLocalPort()+"\t |");
System.out.println("|------------------------------------------------------------------------|");
while(true){
while (i < 5) {
i++;
try {
//Creating if needed a new socket where the clients listens
if (newSock) {
client = serverSocket.accept();
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(client.getOutputStream());
System.out.println("LOG: Client is listening on port: "+client.getPort());
//Here the server creates a new thread for the petition
petition newPet = new petition();
newPet.T.start();
} // try- create input and output buffers
catch (UnknownHostException e) {
System.err.println("JHTTP Server could establish a connection. Exiting...");
catch (IOException e) {
System.err.println("Could not get I/O for the connection to client.");
} //try - create client sockets, wait and attend connection
} //while 5 petitions
System.out.println("Session Closed. 5 continious petitions served.");
out.close();
in.close();
client.close();
newSock = true;
System.gc();
i=0;
} // while - forever
}// -------------------main-------------------
}// jserver - main class of JHTTP server project
class petition implements Runnable {
Thread T;
petition () {
T = new Thread(this);
T.start();
public void run() {
try {
//Analyse petition
Petition_Analysis.Analyse_Petition(jserver.in);
//Then Attend it
if (Petition_Analysis.pt.Version.equals("v10"))
Http_10.Attend_Petition(Petition_Analysis.pt, jserver.out, extra.detectConnectionAlive());
else if (Petition_Analysis.pt.Version.equals("v11"))
Http_11.Attend_Petition(Petition_Analysis.pt, jserver.out, extra.detectClose());
else {
jserver.out.print("HTTP/1.0 400 Bad Request\r\n\r\n");
jserver.out.close();
jserver.in.close();
jserver.client.close();
jserver.newSock = true;
//The following function immediately prints the contents of the PrinterBuffer
jserver.out.flush();
System.gc();
catch (MalformedURLException murle) {
jserver.out.print("HTTP/1.0 400 Bad Request\r\n\r\n");
try { jserver.client.close(); }
catch(IOException ioe) { System.out.println(ioe); }
jserver.newSock = true;
catch (NullPointerException npe) {}
//try - analyse petition & attend it
catch (IOException ioe){
System.out.println(ioe);
} // -- run()
} // --class: thread

Use code tags when posting code.
Given that the code you presented does not call System.exit() I am not sure how it could be exiting with a value of 1.
When you accept a connection from a client the code should do nothing but pass the client socket off to a thread and then start that thread. It should not extract the streams - do that in the thread.
The in/out streams of the client socket should be wholly contained within the thread/Runnable. They do not belong to the class that holds the SockerServer.
Your catch blocks need to be reworked. The first one completely ignores the exception and prints out that a port number is needed. You should be printing the exception message at a minimum and right now you should be be doing a printStackTrace() as well. Additionally you are ignoring a null pointer exception and that is wrong.

The best mod information thread for NB550D/02F

Hey Mini Toshy fans,
There is no FULL solid post on the net of how far you can actully push this hardware from start to finish.
In this post and further postings from YOU...I wish to make a one-stop thread for geeks on this latest unit.
The 32bit OS win 7 [home, professional, ultimate] is the best supported for the AMD grafix chipset and various other drivers of ure choice this is the best information I have gathered......plz correct me if Im wrong?
Also if new 64bit changes come thru please post in this thread :D
So what us geeks need to know is the information for the SATA controller on the board for the Toshiba NB550D/02F PLL5FA-02F02C, other newer models
I have some sketchy information it could be SATA3 which will support an upgrade of a SSD 6GBs controller and some saying it is SATA2 is on the board supporting 3GBs but the S3 connection will still work saturating the speed connection of the S2.
So lets get ALL the best mod information for this unit sorted here and now !!
Post away.....and thx 8>)

So further study I did says 3.5gb of RAM will be usable on a re-install on a 32bit OS of your choice or you can patch the kernel with a patch if you wish to get the full 4gb personally I will not touch the kernel and will be happy with 3.5 than risk security exploits. However that one is up to you......you can Google "extend x86 RAM patch". So we still need the info from a techy who has a SSD installed and can give us SATA and SDD information they have found. Peace and thx again.

Feedback Thread for MX200

Similar Messages

Maybe you are looking for