Feilds require in RFC sender Communication Channel
My scenario is RFC to webservice
The scenario is in X13 server(system No.01)and RFC is in X32(system no:00)
For proceeding in this scenario i require following parameter
Please do help me with this same:
1) application server(gateway)
2)application server service(gateway)
RFC Metadata repository parameter
3)Application server;
Hi,
Go to SMGW Transaction in Application System (R/3)
Goto GO to--Parameters-Display
You will find out Gatewya & Gate way service
Reward Points if helpful
Regards
Sesh
Similar Messages
-
RFC Sender Communication Channel is not Working Properly
Hi All,
I had a Small Problem.
I had configured RFC Sender in Asyn mode as given in Weblog 5398
The Scenario is working fine for 1 time, after the execution the Communication Channel should be made Active again to make it work for the next time.
For every time to Execute the Scenario i had to Activate the RFC CC.
It is some complicated one. So any one please suggest me what can be done to Resolve the issue.
Thanks in Advance.
SriramHi Bhavesh,
when we test RFC connection it is Failing and giving this error
Error Details ERROR: timeout during allocate of registered program
Error Details LOCATION: SAP-Gateway on host p162845 / sapgw00
Error Details DETAIL: TP Flightdatasender init/busy for more than 60 sec
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 31415
If I Activate the RFC sender CC.It is working again.
After 1 Execution.It is throwing this error.
I even added Name as 'jco.server.max_startup_delay' and Value '1000' in advanced Mode of RFC sender CC.
Please suggest me.
Thanks in Advance.
Sriram -
Regarding RFC Sender Communication Channel
Hi All,
I am working on RFC sender channel, need some important information.
1). Can i use single RFC Sender Channel in Multiple Sender Agreements.
2). Can i use Program ID in Multiple Sender RFC Channels. I am having one RFC to File interface and another RFC to JDBC interface.
Do i need to create 2 sender channels and 2 RFC destinations with 2 Program Ids????.
Please give me clarifications.
Regards,
BaluIf i will use single sender RFC channel and Single Program ID for my all sender agreements, how that Single RFC channel
will identify the information like
In our sender agreement we configure not only the channel but also the Sender Interface (in your case RFC)......this is the factor which defines what to accept......in broader term we use the same concept of channel re-use in other cases also and the same work fine because of this Sender Interface.
I found Q28 interesting: https://service.sap.com/sap/support/notes/730870
In first read it may sound confusing...but after some more rreads you will know what the answer means in the SAP note.
Regards,
Abhishek. -
RFC sender communication channel
Hi,
I am working on RFC->XI->SOAP scenario. In R/3, I maintainted an RFC destination with program id same as RFC sender CC in XI, Gateway and host of XI server. But when i test connection the RFC destination, I am getting the following error.
/CPIC-CALL: ThSAPOCMINIT'Transaction program not registered'
Error details: program 'testid' not registered.
What could be the reason and pls let me know if there are any thing else need to be checked or configured. Any blogs or example links are an additional help.
Thanks
Ricky<i>1) In sap gateway (smgw) of R/3 sender, what should LU Name and TP Name contain? I am right now only seeing R3 host and gateway service respectively for both the columns. Is this correct?</i>
>>>LU name is R/3 Host name. To get the gateway service , go to SMGW>Menu in there GOTO->Parameters-->Display..
Generally it is sapgwXX where XX means System no.
<i>2) The Gateway host of RFC destination in R/3 sender should be what? Is it the business system name in XI for the sender R/3?</i>
>>>It should be Application Server details of the Application System i.e R/3 system. U can get this from the SAP logon pad and application host name. It is <u>not</u> XI server.
Hope this helps,
regards,
Moorthy -
Get parameters for rfc sender communication channel
Hello everybody,
does anybody know how to establish the values for the cc-parameters?
For example:
Where do I receive information about:
- the Application Server (Gateway) = Gateway host name of the sender system
- the Application Server Service (Gateway)
- the Program ID
etc.
Regards Mariohi,
did you have a look at my weblog?
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
>>>- the Application Server (Gateway) = Gateway host name of the sender system
fomr SAPlogon
>>>>- the Application Server Service (Gateway)
SAPGW + system number from SAPlogon
>>>>- the Program ID
any name
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Why is a sender communication channel not required for IDOC and PROXY ?
Hello,
In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..) when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
Though this might be a regular question, I am not able to find a proper reason.
Please let me know the reason for the above request.
Thanks & Regards.You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
Regards,
Raj -
Intermittent problems with a RFC receiver communication channel.
Hello.
I want to know how to get the total channel history for a RFC receiver communication channel (in RWB only last 5 calls are available).
We use this communication channel in a java mapping to run a RFC of the abap engine of XI. Sometimes the rfc doesn't work and mapping throws a mapping transformation exception. Then, without a modification, we reprocess the message in SXMB_MONI and it is processed without errors. We think that it could be caused by a huge message volume.
How can I get the maximum number of rfc calls that the rfc communication channel can admit simultaneously. Which parameters have influence in these calls?
Thank you very much.
Alberto.1. Increase the maximum connections
from help.sap.com
Additional Parameters
Parameter ~~~~ Entry
Maximum Connections ~~ Maximum possible number of initial connections required between adapter and sender system. This value is limited internally to a maximum of 50.
2. /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue -
Sender Communication Channel for Integration Scenario IDoc - XI - IDoc?
Hello All,
One general question. I have to configure an IDoc - XI - IDoc Scenario. For this Scenario I have to configure an Receiver Communication Channel (IDoc Adapter) to the Backend System but what about Sending Communication Channel for the Sending R/3 system.
Is the (IDoc) Communication Channel from Sending system to XI required to configured?
Many thanks in advanced!
JochenHi Jochen,
for sending IDOCs from SAP to XI, sender IDOC adapter is not required. when XI will send the IDOC to a SAP system, then receiver IDOC adapter is needed.
Thanks,
Rajeev Gupta -
Error in sender communication channel
Hi,
I am doing File to RFC scenario in which i am using Standard bapi to get the cost from the sap system
while sending the data in sender communication channel the processing mode is in delete mode but it is not deleting and throwing the error
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
this error is from sender communciation channel..
can any one give some inputs for this...
regards,
KishoreK.P.N.,
i have checked it getting the same error. in moni also administrative cache clear error is coming
do we need to do any workaround...
regards
Kishore -
Inactive Sender Communication Channel still processing Files?
We de-activated the Sender Communication Channel of an interface. However, the file adapter keeps processing?
Anybody know what is going on?
Thank-You.Hi Tom,
1) Check out Whether you have De-activated the Right Adapter.
2) Refresh the Cache,
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
c)Call transaction SM58 to check the status of the refresh process.If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.
If you still face issue try this .
Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Regards
Agasthuri Doss -
How can One sender communication channel pick two file from two location
Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter. -
Sender Communication Channel Monitoring Error
Hi....Experts,
i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
pls suggest me how can i rectify these errors..
for helpful answers i will give points*********
regards,
Pasi.
Edited by: pasi s on May 5, 2008 8:35 AM
Edited by: pasi s on May 5, 2008 8:40 AMHi Pasi,
Check if you are using the same business service (under which u have created the Channels) at sender side in configuration.
You have to use the same business serivce for sender under which your communication channels are created...................
Or
Create a sender communication channel in the service that u have used at sender side.............
So i think in your case there is a mismatch of using the diff sender service at diff stages.............
Hope this will solve your problem
Thanks
Sai
PS: kindly reward points if helpful -
Why Can't see RFC Sender communicaiton channels and Sender Agreenment
Why Can't see RFC Sender communicaiton channels and Sender Agreenment,
but other type communicaiton channels is ok.hi
If the sender is R/3 then it has connection directly through RFCs .
XI system can understand HTTP procal directly without any communication channel.
It is the same case for both sender R/3 RFCand IDOC adapters.
more over u can registered to IMPORTS permitted for RFCs and IDOCs while creating the name space as WEB AS ABAP.
regards
sreeni -
BIC Module Error in Sender Communication channel for EDI to File scenario.
Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
AbhishekHi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish -
File Structure - Sender Communication Channel
Hi All,
My Sender flat file structure is below like this
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
I did the Sender Communication Channel configuration - Content Conversion
Document Name : XXX
Document NameSpace: XXXX
Recordset Structure: MT_Test,*
Recordset Sequence: Ascending
Key field Type: String Case-Sensitvie
MT_Test.fieldNames: Filed1,Field2,Field3,Field4,Field5,Field6
MT_Test.fieldSeparator: '|'
MT_Test.additionalLastFileds: ignore
MT_Test.endSeparator : 'nl'
ignoreRecordsetName: true.
But its pick the file, In SXMB_Moni show Currect...
But in Runtime workbench, in Communication Channel moni, it show below like this,
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_Test xmlns:ns0="http://XXXXX">
<JOBS />
</ns0:MT_Test>
What is the Issue, where i missed some thing, In message mapping, its correct..
Thanks.
SRSR,
I am still little confused with your below statement.
But its pick the file, In SXMB_Moni show Currect...
But in Runtime workbench, in Communication Channel moni, it show below like this,
>
> <?xml version="1.0" encoding="UTF-8" ?>
> - <ns0:MT_Test xmlns:ns0="http://XXXXX">
> <JOBS />
> </ns0:MT_Test>
You mean to say that in MONI, the mapping output is fine, but when you check the output at RWB -> CC Monitoring for the Sender Channel, then you get the above mentioned XML?
This means that there is nothing wrong with your source CC settings. If the entry in RWB -> Sender CC is wrong, your MONI entry will never be right. So, this is really weird.
What is the source structure that you have defined in DT?
Regards,
Neetesh
Edited by: Neetesh Raj on Sep 29, 2009 2:31 PM
Maybe you are looking for
-
Delivery note cancellation in case of proforma invoice
Hi SAP Gurus I am in a typical automotive industry project where stock transfer takes place from factory to Sales Depo. In thsi case we generate STO orders - delivery note-- PGI- Proforma invoice--- Excise invoice . Now as no accounting documents ar
-
My iPhotos 6.0.4 app has taken a first class trip to corruption city. Here are the symptoms in the main window: 1. nothing appears in the source panel of the app. 2. nothing appears in the picture panel of the app. 3. can not add new folders in the s
-
Trouble setting HeadingFormat on table created exclusively by VBA
I'm taking the text from the Notes pages of a PowerPoint presentation, and turning it into a table in Word. Each slide has a row in a table, with one of the columns being the text from the notes page of the slide. So far so good! The first row in the
-
Hello all! What negative consequences can arrise if I start the depreciation on the 1st of current month for the current month? for example I run the depreciation on the 1st of september for september. Thankes in advance.
-
A way to have a Photo Mosaic?
Hi, Many thanks in advance for your attention. Does anyone know of a way - either within iWeb or in some software - that one can create a Photo Mosaic? For example, instead of one photo on the Home Page, a mosiac of photos? Thanks, - Ross