Fellowship of the ring
Can anyone explain why the lord of the rings the fellowship of the rings is not available for purchase in the theatrical format? It's available in the extended version but not the regular.
Becasue whomever owns the rights to it did not provide it to Apple in order for them to sell it via the itunes store.
Similar Messages
-
Can't re-download "Fellowship of the Ring" (HD)
Hi everyone,
I previously purchasd the "The Lord of the Rings" special extended edition, and I downloaded the FULL HD version. Today I received a letter from iTunes Team, here's the detail:
Subject: Your Fellowship of the Ring download
From: iTunes Store
Dear iTunes Customer,
Thank you for downloading the movie Fellowship of the Ring. Unfortunately, the movie you received may have had issues with the subtitles. We have corrected the problem and a new copy is available to download, free of charge. To receive the new version, please re-download the title from iTunes.
So I deleted the film, and tried to re-download the corrected one.
Here comes the problem, at the beginning the download window shows that
the size of the FULL HD version of the film is "7.78 GB",
but it suddenly turns out to be "3.50 GB", while keeps downloading.
And even it keeps downloading,
the process will eventually stop just right at 3.50 GB, with an error message behind.
According to iTunes Store description, the size of the FULL HD version of the film should be 7.78 GB, instead of 3.50 GB. Does anyone know what is going on? Thanks!All, this is fixed for me as of this morning on the west coast. Check it yourselves, obviously delete the itunes download cache from the previous bad downloads.
-
Fellowship of the Ring audiobook trouble.
There are three sections in the playlist comprising the book when purchased off of iTunes. I am a little over two hours into the second section and when it reaches a certain point it skips ahead to the beginning of the third section. I have tried it on both my laptop and iphone with the same problem. When I try to scrub past that point it still skips ahead to the third section. As far as I can tell that audio is innaccessible, but it doesn't look like it is over. It says it still has some hours left. Any ideas/Suggestions?
ThanksBecasue whomever owns the rights to it did not provide it to Apple in order for them to sell it via the itunes store.
-
Cant find lord of the rings audiobooks on itunes
Can't find lord of the rings fellowship of the ring volume 1 hunbridged audiobook on the nz itunes store but can find volume 2. The other two books have both volumes 2 able to purchase why?
It's not here in the UK either, presumably because audible.com (who I think supply all the audio books that Apple have) haven't passed it to Apple to put in the store. Is it available on other audiobook sites that you have access to in New Zealand ?
-
How can I adjust just the ringer volume on an iPhone 4s
I have the ringer turned way up because I'm in a noisy work environment, but that also increases the volume for the key click, game sounds, etc. is there a way to only affect the ringer volume?
An alternate method is Accessibility Settings when connected to iTunes. You should be able to turn it off there. I would also check out some of the answers listed to the right of this post and see if they can help.
-
I Purchased lord of the rings extended trilogy but do not have enough storage on my ipad mini 16gb. onky 1 movie fit, is there a way to view the other 2 or to get a refund?
To have them all on your iPad at the same time you would need enough free space, which you won't have on a 16 gig model.
You might be able to download them on your computer's iTunes, possibly via the Store > Check For Available Downloads menu option, or by going to the Purchased link under Quick Links on the right-hand side of the iTunes store homepage. If you can you can then sync/watch them one at a time to your iPad, or stream them from your computer's iTunes to your iPad via homesharing : homesharing will need to be enabled on both your computer's iTunes (File > Home Sharing menu option) and iPad (Settings > Videos) ; both will need to connected to the same wifi network ; and iTunes on your computer will need to be open ; you should then get a 'shared' library option in the Videos app on your iPad -
Can I remotely turn the ringer volume on so I can find my phone?
Can I remotely turn the ringer volume back on, so I can find my phone using the "find my phone" ap? It's nearby, but I don't know where. I think I have an iphone 4???
Thank you so much. I did that, and didn't hear it, but when you said it will work even if the ringer is turned off, I did it again, and went outside, and it had fallen out of my bag near my car. I was pretty sure it was in the house because I had already looked outside, but obviously, not where it was.
Thank you again! -
I am current in Sotheby's Africa and trying to FaceTime my daughter who also has the same ipad as me. My son in law also has the ipad. Despite using my daughters email, I cannot get through to her or my son in law. When I hit FaceTime I can hear the ringing tone, but after a while it comes up saying my daughter is not available, but she is sat by her ipad in the UK. I have checked everything is working so what can I do now to get through to her, especially for Xmas day.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers, Tom -
How do i turn off the ringer in continuity But leave my other sounds on
how do i turn off the ringer in continuity But leave my other sounds on
which iOS are you using? in iOS6 there is a little camera / video on-screen switch that you slide (bottom right). In iOS7 slide (with one finger) the Video - Photo - Square words that appear above the click button on screen
-
The rings have some, but minimal detail on them, some distortion would be acceptable. Currently I am shrinking them to the correct diameters with the transform tool and the trying to enlarge them with the bloat tool, but perhaps there is a better way?
Puppet Warp and the Filter Displace might provide approaches, but neither seems "ideal".
What is the
correct diameter
anyway?
Could you provide examples? -
Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
If anybody can help advise me on this problem i would be very grateful.
ThanksHello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G. -
can i take apart the imac power cord to put it through a hole in my desk. I'm able to get the ring off, but dont want take the housing off incase it breaks
I hear you. The reason I asked is that on the computer end of the cable, I took the ring off and it looks like there are some clasps around the housing, so I was wondering if these were for the purpose of threading the the cable. I will try and get some pictures. The drill is charging, however!!
Thanks
P -
The ringer setting is not working on my iPhone 4s
My iPhone fell into my pond for less than 10 secs. I pulled it out in time to dry it off and shake some of the water out. I made sure the screen was still working and sounds were functioning then I turned it off and left it in a bag or rice for 24 hrs. The next day I took it out and it was working fine. Now suddenly today, the ringer setting is not working. When I go into settings>sounds I press on ringtone and it seems to be working. Speakers are fine and when someone calls I have no problem. I can also hear the ringtones. But when someone txts me or when I get notifications it doesn't have any sound? The alarms don't work and the sounds in apps don't work. When I put the charger in, it doesn't make a sound. It vibrates only except when someone calls me... My headphone jack seems to be working fine because I can hear everything even the text tones and sounds in apps... What should I do? How much will I have to pay to get someone at apple to fix this problem? I'm assuming there is still some moisture in the phone maybe? It was working for a week until today I'm not planing to upgade to the iPhone 5 anytime soon. Btw, the volume buttons do work it's just when I press on it, it doesn't show the bars when you press up or down... it's just blank.
If it's physically stuck it might be best to bring it into the Apple store at George Street Sydney.
Set up an appointment with the Apple store via the website http://www.apple.com/au/support/contact/ -
the ringer of my iphone 4s is not working but when itried to go in setting then sound and tried to change ringtone the ringer is working..pls help
Check the mute switch along the side, near the external volume controls.
-
i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it
i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it
Maybe you are looking for
-
How do I sync my iPhone 5 and iPad using iTunes with my new Windows 8 computer? Windows support community implies it's an Apple problem.
-
Open iview url in WDA main view (below some long text)
Hi Experts, My WDA first page is divided into 2 parts top & bottom. The top will have some text and bottom will have a display areas to display the portal iview. (Display means open iview directly on opening the first page of the application without
-
Data are not transfered to a table view using signal out
Hi all, we have recently upgraded to SP16 and I'm now facing a problem on my model that worked fine when we were on SP15. I have a data service returning data to my model. The data are transfered to a signal out element and then displayed into a tabl
-
Function Modue with Dynamic Table as output parameter
Hi experts, i have function (below) which reads "dynamically" data from table which is specify as input parameter, the data are "saved" in <ft>. How can i return <ft> as output parameter of function module (table) ? function import parameter - > IC_
-
Hi Experts; 1- can you publish the XSL file of B1BPtoB1BP Scenario Please? 2- do i have to update the XSL file for the predefined Packages? regards;